00000643

Similar Questions

• The error code is 00000643. I can't install the update and I think it comes to Netframe.

  I can't install this update and I keep getting the error code 00000643. What should I do?

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  =====================

  Step #1 => foremost, note what version of .NET Framework is installed:

  How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
  http://support.Microsoft.com/kb/318785

  Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100

  After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.

  NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.

  IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:

  1. the .net framework 3.5, then...
  2 .net framework 1.1, then...
  3 .net framework 1.1 SP1

  NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx.  Please read ALL as well as the relatedhttp://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.

  Step #3 => Check-in at Windows Update and install the critical updates of security offered.

• Error 00000643

  Please can you tell me why it keeps failing when you try to install NET Framework 3.5 Service Pack 1 and NET framework 3.5 Family it gives me error 00000643 ar code. Thank you

  Hi ellie20020,

  Please see the following link for the Microsoft KB article to download The Windows Installer CleanUp utility. When you go to download it follow these steps:

  1 Select this option to Save and put it on your desktop

  2. click right msicuu2.exe (for Windows Installer CleanUp Utility) and select run as administrator.

  3. follow the wizard to install the Windows Installer CleanUp utility

  Now, click Start>all programs>Windows Installer CleanUp utility (provide administrator rights if prompted). Now, try to locate and remove the .net Framework 3.5 software, after doing so, restart your computer.

  Now download and install the NET Framework 3.5 and the update:

  1. Microsoft .NET Framework 3.5

  2. Microsoft .NET Framework 3.5 Service Pack 1

  3. Microsoft .NET Framework 3.5 Family Update for Windows Vista x 86, and Windows Server 2008 x 86

  The last update you can see if for Windows Vista x 86 (32-bit aka), if you have a 64 bit system to ensure that you download and install the x 64.

  We can't wait to hear back from you on your results.

  Brian
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• An error 0 x 00000643 attachment with the installation of the printer

  I am running Windows Vista on a laptop and I am trying to install a wireless printer.  I get error 0 x 00000643.  I went to the windows support center and performed all workaround solutions that he suggested.  The WSD port has been deleted, but whenever I try to install the printer fails and returns the WSD port.  When the WSD port is removed, the installation fails without code.  I've had this installed printer so it worked before.  Any ideas?

  Hi Moyerhouse,

  Thank you for visiting Microsoft Answers.

  (a) don't you make changes on the computer before this problem?
  (b) who is the manufacturer of the printer?
   
  I first suggest you to run the tool to 'Fix' of Microsoft that automatically diagnoses and repairs printing problems, installation of a printer, connecting to a network printer and other related errors.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Let ' also install the latest drivers for the printer from the manufacturer's website and check if it helps.

  OR

  You can also uninstall the printer using the network browser and install it again. To do this, follow these steps:
  Open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  In the pane tasks, click view computers and devices.
  Locate the printer, and then right click on the printer to uninstall.
  Once the printer is uninstalled, connect the printer to the computer again. The Plug-and-Play service begins to install the printer.

  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 0 x 00000643 with installation of printer Vista

  I have the same problem, a Windows Vista laptop wireless connected to my network.  I have a Canon MF8000C printer I am trying to connect.  This printer is also wireless connected to my network.  I was able to install the printer on other computers on my home network, but not this one.
   
  I ran the program Fix It, but no luck.  I checked that printer sharing is on.
  I also tried to uninstall and install, nothing helps.
  When I use Explorer the item appears on the network, and when I try to install the drivers manually from the Canon Website, the installer can not find the device, even when I provided the IP address that I see in the properties of the printer.

  Hello

  Welcome to the Microsoft Community and thanks for posting the question.

  According to the description, it seems that you are facing a problem when installing a wireless printer on your Windows Vista operating system.

  Refer to the steps in the following Microsoft article:

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643)": http://support.microsoft.com/kb/944960

  Printer network problems: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-printer-problems

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

  Keep us informed on the status of the issue.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Install error 0 x 00000643 for my Kodak ESP2150 printer

  I have a Kodak ESP2150 printer/scanner and I get the error code 0 x 00000643

  Hello

  1. when exactly you get the error message?

  2. you are trying to install the printer?

  3 did you changes to the computer before the show?

  See the following article:

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

• Cannot install the printer wireless with error code 0 x 00000643

  Original title: error0x00000643 on the installation of the printer

  try to install printerget wireless to the final installation and getting the error 0 x 00000643. Windows Vista 64-bit

  Hello

   
   
  Thanks for posting your question in the Microsoft Community.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:
  (1) did you of recent changes to the computer before this problem?
  (2) what is the brand and model of the printer?
   
  Please follow the methods and mark the question below:
   
  Method 1:
   
  I suggest you to install the printer in clean boot mode.
   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Method 2:
   
  Install the latest drivers for the printer from the manufacturer's website and check if that helps.
   
  OR
   
  You can also uninstall the printer using the network browser and install it again.
   
  To do this, follow these steps:
  a. open the network and sharing Center. To do this, type Network Center and sharing in the search box and then click Network Center and sharing in the list programs.
  b. in the pane tasks, click view computers and devices.
  c. find the printer and then right click on the printer to uninstall.
  d. once the printer is uninstalled, reconnect the printer to the computer. The Plug-and-Play service begins to install the printer.
   
  Reference:
  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).
  http://support.Microsoft.com/kb/944960
   
   
  I hope that the information above helps you.

• 00000643 error code and error 2 Code

  • Whenever I turn on my computer, I always get (an open event is a not to perform, error code 2)
  • I always get a message there and important update that I need to install, I tried again and again to install this and it still says (update failed, error code 643) or (00000643)

  Hello

  1. what was the last time that the computer worked well?

  2. you have any security program installed on the computer?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  To work with the issue of the update of Windows, I suggest you go through the steps mentioned in the link and the Coachman.

  Windows Update error 80070643

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Method 2:

  For the start of the error, I suggest you perform a system analysis File Checker.

  I suggest that you try to perform the file system Checker analysis on the computer. The scan will replace all the Windows files corrupted with new ones.

  Click on the link mentioned below for further guidance on the scanning of the file system Checker

  http://support.Microsoft.com/kb/929833

  Note: You may be prompted to insert the Windows Vista installation DVD, if any files are missing or damaged.

  Method 3:

  If the issue is not resolved, then you can perform a clean boot and try to install the updates, and also to isolate the software that may cause the error to start. This process allows you to work with the two questions facing the computer.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• Error 0 x 00000643 when installing network printer

  I am trying to install a Canon Pixma MX 892 printer on my network.  I installed it on one of my PC without problems (OS Windows XP).  However, when I try to install it on my HP Pavalion 7750n (Vista Home Premium 32-bit OS), the printer will not install.  I always get the error message 0 x 00000643.  I followed the directions of previous discussions, nothing helps.  Should add that I had a Canon Pixma MX860 I had no troubles to install on each pc.  Someone managed to install a printer after this error message appeared?

  Hello

  Method 1:

  Check the link and see if it helps:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 3:

  Check out the link and update the printer drivers on the computer:

  On PIXMA MX892

  http://USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx892#DriversAndSoftware

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• I can't install the update from 6 to 4. Error Code 0 x 00000643...

  I can not install update 6-4.  Error Code 00000643 please help - I have tried everything.

  Thank you in advance,

  Jane

  Hello

  For 6to4 adapters:

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message.
  http://support.Microsoft.com/kb/932520

  Check the answer by Diana D. here:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• get the update wandered 00000643 can you help me

  my computer will not update I have is gave me this 00000643 err

  my computer will not update I have is gave me this 00000643 err

  Take a look at this Microsoft Support tutorial
  http://support.Microsoft.com/kb/923100

  If this does not resolve your problem, please repost on the right forum... Windows Uopdate Forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?tab=unanswered

• tried to download updates to receive messages of error, 0000000E and 00000643 what can I do?

  I was download updates from windows, and two have not downloaded.  I got following error messages: (1) Windows updated encountern an unknown error Code E.  (2) Windows Update encountered and unknown, error Code 643.  What should I do?

  See the following topics:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-updates-error-code-00000643-and-00000646/5ebc959b-7067-4E81-BE9B-a869f5e841cf

  And in the interests of security, remove your e-mail address of your profile display name.  Use emma417.

• error message 00000643 - dt000 when downloading an update

  I'm unable to download an important update (Microsoft .NET Framework 4 for Windows 7 x 64.  I get the error message

  00000643, dt000.  I tried the "fix it" from Microsoft, and it does not help.  My system has been gel, Explorer 9 closure continues, my hotmail is not working properly.  I did a scan s Malwarebyte and it did pick up a few items as did my Norton but my system is always wrong.  I'm not strong in computer science, so it's very frustrating - suggestions?

  Hello

  First of all just try to run the hard drive Diagnostics to eliminate hardware problems.

  Here is the link with the steps to perform the system on the hard drive Diagnostics:

  Diagnostic system (F2)

  pus

  Test hard disk

  If pass all the tests, you can then follow the steps below:

  Loading on Safe Mode with network test and check if is slow as well.

  How to get into the Safe Mode with networking:

  Once in safe mode with networking to make a clean start

  How to make a clean start: http://support.Microsoft.com/kb/331796  

  If it works fine in Safe Mode then most likely a software problem.

  Then restart the laptop for normal windows in the boot, only andrun diskcleanup

  Then run this fixit again if you have already run...

  Reset the Windows Update components?

  After restarting the laptop try to re-run the updates. If possible directly download the update from the Microsoft Download Center, just by typing the code was updated in google.

• Installation of Canon PIXMA MG5200 Wireless Printer gives the error code 0 x 00000643 on Windows Vista

  Original title: Wireless Printer put in place

  Trying to install the scanner software etc. on my new printer canon PIXMA MG5200, already implemented successfully using WPS, while it was printing ok, error code 0200 0000 documents came along with a "a newer version of MP readers is installed for cancelled installation. Uninstalling now left me unable to reinstall the printer link with my laptop with the advent of error code 0 x 00000643 up - help what I did?  Vista Home is my OS. Our other laptop which runs on Windows 7 is still printing ok but also not load the software. Canon told me to ask you to clean the registry? ! If this is what is needed, how can I do this, and surely the problem repeats whenever I try to install again. I tried the system restore before I loaded the software and no change.

  Hi AlisonHamilton,

  It is sufficient to indicate the complete error message you receive.

  Method 1: You can see the steps outlined in the article below, which deals with a similar question

  Error message when you try to install a WSD printer on a Windows Vista-based computer after installing first attempt fails: "impossible Operation completed (error 0 x 00000643).

  http://support.Microsoft.com/kb/944960

  Method 2:  You can run the fixit available in the link below

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/en-us

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  ***************************************************************************