0211 keyboard error, press F1 to continue

Similar Questions

• 0211 keyboard error - Win98 HP

  Hello. I have a Windows 98 HP Pavilion 8380 office. I have the mouse and keyboard that goes with it. When I start it, I get the title screen and then I get a double beep. On the screen, it shows all the copyright info, etc... and then "0211: Keyboard Error.» Press to the installer, to resume. " The problem is, does not work my keyboard and my mouse is not working or the other. Any ideas?

  Then, you need to try another keyboard and a mouse.  Borrow from a friend or buy if there is no other choice.

• Smart hard disk error: "Press enter to continue and it starts OK.

  I have run chkdsk full and sometimes without error, but at startup it says Smart hard disk error. Press ENTER to continue and it starts OK

  Go into the BIOS and run the drive Diagnostics (long version).

  Normally, when you get a SMART disk error this means imminent disk failure.  Smart drive test checks the environment of hard disk and is much more than chkdsk thorugh.

  A cautious soul would replace the disc if the diagnostic test is a failure.

  Is your laptop still under warranty?

  Best regards
  ERICO

• My dell desktop windows vista shows "keyboard failure" press F1 to continue, F2 to enter setup. I can't get past this screen. Have a logitech keyboard

  My screen on my dell desktop computer is frozen with 'keyboard failure', I have a Logitech keyboard. I tried f1 to continue and f2 to enter setup, disconnect, reconnect anything will do. How can I go back?

  Looks like you need to buy a new keyboard or try another and see if you still have the same problem.

  I hope this helps.

• 0211 keyboard error

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi... pls expand on how to find it:

  • Access the Debug menu by clicking on rw + ff + ch2 buttons when starting.
    Choose 'check fs' and restart your device. You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Here are some ways to know if it is a hardware or a software problem:

  • See if the problem persists when you use an external keyboard (i.e. a USB keyboard)
  • Check what happens when you use the on-screen keyboard. You call it with the command osk.exe.

  If it's a software problem then you should check if it persists when you start mode without failure.

• Error - 3rd slave drive ATAPI Incompatible press F1 to continue starting Windows.

  Original title: 3rd slave ATAPI Incompatible drive.

  When I turn on my computer, the stalls of process startup and says '3rd slave drive ATAPI Incompatible press F1 to continue' I press F1 and then esc because I don't know what to do.  When the computer does not start, the only thing that is not working is my CD drive.  It does not read the Cd I already tried the FIX for CD/DVD.  I tried to uninstall and reinstall the disk set.  When I restart the computer and let the TI find it on its own, I get the same problem.  I tried a few system restores.  None of this has worked.  I don't know how it happened because some other people use this computer.  Could this be a problem with the plug-and-play functions.  Help please.  I am running Windows XP and have updated all Microsoft Update to see if it helped, it only has done it.

  Hi RachelH_7997,

  You can edit the BIOS (Basic Input Output System) settings or replace the CD/DVD drive and check if the problem persists. If you are not comfortable to run, you can contact the manufacturer of your computer for help.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.

• HP 15-g030so: the selected boot device has failed. Press ENTER to continue

  So, I got a disc error and had to go on my hard drive. After that, I was invited by a certain recovery of hp and tool that fussed around a while and rung me that he could not repair the system and some newspapers were stored. After that I tried to install win 8.1 running from a usb storage device that was the 8.1 software the installer of windows in it. Then the screen went black and I was promtped with "selected boot device failed." Press Enter to continue. "

  Any ideas on how to solve this problem?

  Problemi1 wrote:
  And now we're back to the original problem. I have an official version of windows 8.1 downloaded and formatted to a 8 GB USB by the official program from the official websites of microsoft. And just to clarify, it works with my pc. Now, when I try to start the installation in HP computer, it promots me with "selected boot device failed." Press ENTER to continue"and im the possibility of"boot manager"," Manager "start of the EFI file', who faced the same problem when I try to manually start the device and start"(yep 2 times). "»

  Hello

  Sorry to hear that.

  If you see boot and boot to the EFI file manager but nothing else, the USB is not detected.

  Please, perform the above steps

  s ' ensure that the 8.1 Win USB is intact and working

  -Secure Boot to disable and enable the Legacy mode

  -save changes and continue with the F9 mode.

  

  If it still does not respond, please take screenshots and join them in the next post.

  I hope this helps.

• n005tx Pavilion 15: "selected image is not authenticated to. "Press on enter continue" at the start of the

  Hi all, I have a pavilion laptop g6 - 2253ca who works with a windows 8 (64-bit). I have a strange problem since this morning and an error msg "selected image is not authenticated to. "press on enter continue ' that appears when I try to start. I have not installed program on my computer before it happens. I just sailed on the Internet and all of a sudden the screen is grey and the msg appeared on this subject.

  I went on several forums for information on this subject. That's what I did:

  -hard reset
  -Restart and boot into BIOS
  -Disable secureboot and enable legacy initialization
  -Press F10 to save and exit BIOS

  -Restart

  -the system asked me to enter a digit of 4 password and press ENTER to apply the changes

  -done, but I got stuck another MSG: "no boot device, insert the boot disk and press any key.

  Not able to find something else to move to another service I thought that maybe the value default bootable device was not the HARD disk if:
  -I restart and boot into the boot F9 Manager
  -does not not the same msg (no boot device, insert the startup disk and press a key) is displayed.

  Try to run the auto repair using the F11 Recovery Manager, but I can't start on it during startup.

  So, what should I do now? I am really disappointed...

  Hello

  Try loading at F2 run check disk test hard if that passes you will need a recovery disk. If the hard drive is not detected reinsert the disc hard try to rerun the test if you have the same hard disk problem that went wrong to replace the drive. Please call HP technical support check for warranty and the part replaced.

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lenovo series k - disk error - press any key

  I have a brand new Lenovo computer. Its a center of the idea, and when I start it it says disk error - press any key. If someone has had this problem and to know what anyone on this subject? I work when I press "any key" but I'm worried that it could turn into a serious problem. Its only 2 days years the computer.

  Moderator edit: added detail to the subject.

  Oh never mind lenovo was trying to read my USB. Apparently you can not leave a flash drive in Lenovo you can HP. otherwise, I love this computer!

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• disk-read error press ctrl alt del

  I start to load Windows XP Pro and I get an error MSG before it comes to the first Windows XP logo, it reads the disk read error press ctrl, alt, del start I have checked all my connections and cables. I can add another hard drive and use bad like a slave and it starts up fine, and I went to the slave and looked everything I could think of, go back, it just above starts with the same error.

  Hello

  I suggest you get into the Recovery Console and use the where command prompt to run the chkdsk command. This scan the hard drive for bad sectors and recover any information from reading. To get instructions on how to enter the recovery console in Windows XP:
  How to install and use the Recovery Console in Windows XP 
  The KB above also shows how to use the Recovery Console prompt.
  a. Insert the Windows XP startup disk in the floppy drive, or insert the Windows XP CD into the CD drive and restart the computer.
  b. Click to select all the options required to start the computer from the reader, if you are prompted.
  c. when the "Welcome" screen appears, press R to start the Recovery Console.
  d. If you have a computer dual-boot or multiboot, select the installation that you must Access from the Recovery Console.
  e. When you are prompted, type the administrator password. If the administrator password is blank, just press ENTER.
  f. type in the following command and press ENTER:
  Chkdsk /r
  g. once the command is executed type "exit" (without the quotes) to exit the command prompt and check if the problem is resolved.
   
  See also:
  http://support.Microsoft.com/kb/315265
  Note:
  
  Warning of Chkdsk.
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• XP will not complete boot. Message says it can't find disk hard on 0 press F1 to continue. When I start it

  Windows XP will not start end upward.  Message says it can't find disk hard on 0 press F1 to continue.  When I do boots well.

  Hello

  1 have you made changes to hardware or BIOS settings recently?

  2. What is the brand and model of the computer?

  I suggest to follow the steps provided and check if it helps.

  Enter your menu of the BIOS by pressing F2 at startup. Check the following settings:

  Function of the option

  Primary hard drive 0 displays the primary hard drive 0. The default value is Auto.

  Main main Hard Drive 1 shows hard

  Disc 1 (if installed). The default value is disabled.

  Make sure that primary 0 is set to AUTO.

  Hope this information is useful.

• I still have to press F1 to continue when I start my computer it says secondary drive not found

  Whenever I restart my computer, I get this message "Secondary Drive 1 not found press F1 to continue, F2 to run the Setup utility" so I just pressing F1 all the time, can someone help me solve this problem, so I do not hit anything, so that the computer will go just directly on windows, I have a Dell Dimension 3000 and running windows XP.

  Thank you

  Hi smiley1958,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?

  Method 1

  Usually, this would happen if the system basic input/output system (BIOS) settings are incorrect.

  See the link on the Dell forums and try the steps mentioned, check if it helps.

  Method 2

  If the previous step fails, then you will need to contact Dell support to fix the settings in the basic input/output system (BIOS).

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

• Error - loading at start-up, my computer is giving a "loading error" «press any key to restart...» »

  At start-up my Sony Vaio with XP is to give a "load error" "press any key to restart '. .  Pressing a button any does not help.  I shut the computer down at least five times, and I get the same message every time. Help

  REX

  I ran fixmbr too, but you don't need to contact your manufacturer for assistance.

  It is extremely unlikely that any computer purchased at a store bought on this planet will have installed XP Recovery Console.

  It is extremely unlikely that any computer purchased at a store bought on this planet will be accompanied by a genuine XP installation CD bootable that can be used to start the XP Recovery Console.

  It's extremely likely that any manufacturer on this planet will send you an installation CD XP genuine for you can start in the Recovery Console.

  It is extremely likely that the majority of the posters on the forums is not any type of bootable XP media.

  It is extremely likely that the majority of the posters on the forums have never actually seen, possessed or otherwise come into contact with an XP bootable installation CD authentic in their lives, or if they already had in their possession, it is now nowhere to be found.

  I wonder why never support engineers offer this idea for the Recovery Console.

  (a) they do not know how
  (b) they are not allowed to post anything that isn't in a KB article
  (c) they are not allowed to post links to any place outside of Microsoft
  (d) your idea here

  You can make a bootable CD of XP (no XP media required) Recovery Console.

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true