0x0000007E during installation of Windows 7 Pro

Similar Questions

• STOP: error 0x0000007E during installation of Windows XP pci.sys

  I'm trying to remove the original on my T400 scores so that I can install Windows XP.  I booted from a CD, and for Windows XP to load I get the above error.  I disable the occultation, changed the HD compatibility, multi-process core is also disabled.  Any ideas?

  Hello Miner,.

  I changed the version of the installation cd and it worked.  Thanks for the help both of you.

  Kind regards

  Roberto

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Desktop browsers does not not after the installation of Windows 8 Pro

  Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.

  Hello

  If it works well before?

  Try to set Internet Explorer as your web browser as default, it worked for me.

  See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17

  All the best...

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• during the installation of windows xp pro, I get a message that says can'nt read the disc

  When the windows xp pro installation I get a message that says can'nt read the disk and ask a complete worm that I have a full verion

  Hello

  Using disk management to reassign the partition and try to install the operating system.

  Rgds,
  J Chambers

• Installation of Windows XP Pro on a new configuration of the motherboard. Installation locks a blue screen during the installation of devices. Assistance from ms said why, but not healing. Anyone know an answer?

  My old motherboard gave the soul, and I have now installed a Gigabyte GA-880GM-UD2H with an AMD Phenom 6 processor and 4 GB of RAM.  The 2 HD is a Maxtor Sata 1 300 GB ones. One is divided into 2 equal partitions, the other has a single partition. During installation, it hangs at a blue screen during the "installing devices" and towards the end of the indicator. Removing everything except the essential, makes no difference.
  With 0x0000000A IRQL_NOT_LESS_OR_EQUAL error message States. This rising on the MS, it indicates:-stop this message indicates that a kernel-mode process or driver tried to access a memory address in which he was not allowed to access. The most common cause of this error is a bad or corrupted pointer that refers to an incorrect location in the memory. A pointer is a variable used by a program to designate a block of memory. If the variable has an incorrect value, the program tries to access memory that it shouldn't. When this occurs in a user mode application, it generates an access violation. When it occurs in kernel mode, it generates a STOP 0x0000000A messages. If you encounter this error during the upgrade to a newer version of Windows, it could be caused by a device driver, system service, a virus scanner, or backup tool which is not compatible with the new version.

  I start with new parts, except the DVD & HDs drive and with a start-up Virgin & installation process. I'm not upgraded to the BONE, that's the one I was using before the reconstruction. The supplier of components, suspected of defective parts and cooperated in the provision of a set of replacement of parts, but there is no change in the problem.

  Can someone explain what I can do to start?   Thank you!

  Hello

  See the article below which might help you.

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• Windows will ask drivers during the installation of Windows 7 Pro on samsung SSD 950

  I'm doing a clean install of windows 7 Pro on a new Samsung 950 m2 Pro drive. My motherboard sees the drive but the windows 7 install is not and wonder which I can't find a driver. It is a new construction. Asus motherboard. I'm installing from the DVD, and everything starts fine until the Setup program cannot find the 950 pro. The 950 pro is the only player at this moment, I installed. Is there any solution for this?

  Thanks for looking into this but I found a solution, all I had needed was the pilot for the 950 pro, once everything went as smooth as, say Kalua. Feel good that here the monster has increased.

• Installation of Windows 7 Pro on Windows Vista

  Hello

  -J' backed up all my data on an external drive.

  -A conducted an audit of compatibality and I'm ok to install 7

  -Ran Microsoft Malware Scan

  -Updated, ran and disabled virus protection

  -Checked to see if my computer was 32 or 64-bit (32)

  -Ran the Windows 7 Pro Installation disk

  * Chose to connect to the internet during installation for updates to update more

  * A selected custom installation (I like all of the deleted computer)

  He asks me, "Where do you want to install Windows?" and gives me three options.

  Disk 0 Partition 1 / 70.0 MB / 62.0 MB free / OEM revised

  Disk 0 Partition 2 (d) / 19.5/19.4 Go free / primary

  0 3 disk partition (c) / 576 GB / Gree 396.7 / system

  Which to choose and why there are three partitions?

  The first two partitions were likely put there by the OEM computer for purposes of recovery for VISTA.

  If you no longer want a return to VISTA, you can delete all partitions during the installation of Windows 7.

  See below.

  Install Windows 7

  Steps 7 and 8

  Otherwise, install on Partition 3, the C:

• Reference Dell blutooth 370 stopped software installation on Windows 8 Pro,

  Original blutooth title: Dell 370 works is not in Windows 8 Pro of the latest broadcom driver stops windows start with the crucial problem.

  370 Bluetooth software Dell shows the compatibility problem during installation and no option to install in compatibility mode, a few days ago I downloaded the latest version of the software from the site of Broadcom bluetooth and it started to install and halfway through installing any system stopped working even as Start menu then I turned off via the power button / stop and started but then shown OS startup error some critical drivers are missing I tried to fix the system but nothing worked and I also tried to restore the backup drivers via cmd, but nothing has worked.

  Now, I'm not able to use my bluetooth devices.

  Please respond if you have any solution.

  I had the EXACT same problem. I have dell studio 1435 with Broadcom 370 Bluetooth device. As mentioned by you, my device manager was showing also not everything about Bluetooth. Please, download the following application. It works like charm. I installed it on windows 8 Pro 64-Bit. Before I had vista 32 bit.

  http://FTP1.Dell.com/folder00865420m/1/

  Let me know if it works.

  Ketan

• Installation of Windows 8 Pro

  Have used the assistance (UA) upgrade for Windows 8 pro - bought the product through it--was not ready to upgrade the product at this moment that the AU asked to remove two applications because of the incompatibility. So I saved the product in the form of ISO file with the provided product key. The AU has been closed.

  Later various learned for both of these applications will work with Windows 8 pro, just that these drivers will properly get added during the installation under Windows 8. After you have uninstalled both apps. I ran new AU - and he invites me to buy new Windows 8!

  The ISO file is written on DVD - its bootable - is there a way for the AU to take the DVD source? She sucks to keep asking for option to purchase again.

  What happens if I do an install from the DVD? He spend Win7 and keep the settings and programs?

  You know how frustrating it can be if something is missing...

  Here you go-Windows 8 already purchased Upgrade with key Pro Assistant - works great!

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

• Not found CD/DVD unit after installation of Windows 8 PRO

  I can't play a dvd after you have installed Windows 8 PRO. The wrong researcher: material cannot start because the config damaged or incomplete information in the registry (code 19).

  When you are looking for a new driver, told me that I have the last. I read on the Microsoft technical support who has a similar problem occurred on the Vista installation, but the solution should not be applied on this installation.

  What else is to deal with this problem?

  Hello

  Did you Win8 upgrade or clean install?

  Check it please http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and instructions.

• Bus driver SM with yellow mark after installation of Windows XP Pro

  Finally, I have windows xp pro loaded. But in Manager device theres a yellow mark sm bus driver. Searching the forum I seem to have fould to her in the video driver ATI pack. But when the driver is loaded it messes up windows so it does not start.

  Can anyone help?

  Paul

  Hello

  I am reading other threads and it seems that you have a laptop Satellite Pro A60.
  What can I say you installed the OS manually and in my opinion a simple driver is missing
  Have you tried to install the infrared driver of the European driver Toshiba page?
  It may be a key

  In any case, before you start the manual installation of the OS, you must read the Installation Instructions. You will find all drivers that must be installed and the proper installation order.

  Please check this document and follow the guidelines

• No sound, no new installation of Windows XP Pro SP3

  We had to install Windows XP Pro on a laptop but the sound does not work.  Device Manager displays the details as an "Audio on High Defeinition Bus device" Audio and show details such as HDAUDIO\FUNC_01 & VEN_1106 & DEV_1708 & SUBSYS_15580663 & REV_1007\5 & 2F010DBF & 0 & 0001

  There is a yellow question mark against this material on other devices, Device Manager. The properties indicates it is present, but no drivers were installed with Code 28. Using the results of option to reinstall the drivers in thwe Wizard saying that it cannot install this hardware because the required software is not found by the wizrad!

  I tried some drivers, such as those from Realtek, but with no result.

  Any suggestion please?

  (Note that it worked on Vista professional but which had to be replaced due to graphics card conflicts, solved with XP Pro).

  No version of Windows already had a set of drivers included. There is too much material 'out there' for Microsoft to consider being completely comprehensive installation. In any case what are Microsoft doing about / hardware technology which is backdated by the version of Windows that uses any given individual?

  Out of curiosity, what is the manufacturer of your PC? I've never heard of which did not provide for drivers.

  If they do not respond to emails, http://www.pcidatabase.com/ can be useful. Your ID Fri and dev are respectively of 1106 to 1708. Use the drivers found in this way at your own risk. Set a restore point before installation. Don't let you be guided to use any driver 'detective '. If you use Windows Update.

  As I pointed out, you may be missing other drivers too such as (but not limited to) chipset and LAN.

  Tricky