0x000000f of error \boot\bcd

Laptop Asus G1 series

Windows is unable to read the boot configuration data
0x000000f of error \boot\bcd

said to insert installation disk but all I have is the asus recovery disc?

Download the ISO on the link provided and make a record of repair time it starts.

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

When you have changed that, insert the Bootable disk you did in the drive and reboot.

http://www.bleepingcomputer.com/tutorials/tutorial148.html

Link above shows what the process looks like and a manual, it load the repair options.

NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

Read all the info on the website on how to create and use:

http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

It's a very good Vista startup repair disk.

You can do a system restart tool, system, etc it restore.

It is NOT a disc of resettlement.

And the 32-bit is what normally comes on a computer, unless 64-bit.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

    Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

    Hello

    Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
    is a complete reset of the material.

    See if this applies:

    Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
    2008-based computer after hibernation: "Windows failed to Start.
    http://support.Microsoft.com/kb/95752

    ----------------------------------------------------------------------------------------------------------

    More troubleshooting:

    / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
    1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
    Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

    Try the Startup Repair tool

    This tells you how to access the System Recovery Options and/or with a Vista disk
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    Try Options recovery or a disk of Vista startup repair.

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    ----------------------------------------------------

    If the above didn't help:

    At the prompt of the startup disk:

    Bootrec /fixmbr

    then

    Bootrec /fixboot

    See if you can boot from the hard disk

    If this isn't the case, restart on Windows drive:

    At the prompt of the startup disk:

    CHKDSK C: /f /r

    ----------------------------------------------------

    If necessary this 'peut' help: (not the same error however it may be useful)

    Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
    required information.
    http://support.Microsoft.com/kb/927391

    ==============================================================

    If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
    Box stores) or system manufacturer support.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error \boot\bcd 0xc000000f and windows vista recovery status do not work

    Well, I have HP Compaq Presario v3751AU and he could not start today and in \boot\bcd 0xc000000f error.

    I try to put in the recovery disc, it gave me the message "" press any key to start from the CD or DVD. "" When I do this, all that appears is a black screen that says "Windows loading files...". "with a white loading bar in the background, but it is not actually boot from the disc then. the mouse pointer is displayed on the background green-vista, but there is nothing I can click, such as the 'next' button or even the language selection button. He continues to freeze on the vacuum-vista-green background.

    can someone help me?

    Hello

    If you have problems with the process of recovery of manufacturers, contact the manufacturer

    It's their recovery process not microsofts

  • error \Boot\Bcd 0xc000000f on vista

    I've updated my drivers last night and this error message came when I started re, \boot\bcd 0xc000000f

    Please put in your cd of windows and repair...

    so I put in my cd and it appears new, no option to boot from the disc, checked the bios cd is first starting, still no option to boot from the disc, I get my screen/post of the bios, then black screen then this message. What can I do?

    Hi calus2404,

    1. How have you installed Windows Vista? Is it pre-installed?

    2. using Windows Vista CD or DVD?

    If you can organize an another DVD of Windows Vista, then use it and check if you can load from disk.

    If you can load, then try the steps in the link below to perform a system restore or startup repair and check to see if you can boot into normal mode.

    What to do if Windows does not start correctly

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Vista Start Up problem Boot\BCD error

    Husband has Vista, and when he's trying to start his computer he gets the following error message:

    File: \Boot\BCD
    Status: 0xc0000034
    Info: The Windows Boot Configuration data file is missing required information

    I have the same make and model laptop and I have no problem.

    Any suggestions please.

    This knowledge base document Microsoft might help you:

    + Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information" +. "
    http://support.Microsoft.com/kb/927391

    According to this doc the this error occurs when two
    The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
    The Boot\BCD file on the active partition is damaged or missing.

    See how to solve this problem.

    Good bye

  • Status of Boot\BCD 0xc0000225. Error

    I write because I also have the same problem with my laptop as U. I have a laptop Hp G6 and I just shrunk my C drive after a take-over of the factory... and later I can´t get in my laptop because the error: file: \Boot\BCD 0xc0000225 status. Please could you help me with this? How did solve you your problem. Thank you very much.

    Please answer me as soon as possible

    Press F8 at startup to appear the WinRE and select "repair your computer".  On the menu next, open a command prompt and type in the following:

    Bootrec /rebuildbcd

    and press ENTER.  If you are asked about the installations of windows, select 'Y' or 'A '.  After that, you should be able to boot into windows.

  • Xc0000225 Boot\BCD error 0 after factory restore

    So I recently did a restore of the configuration system once the OS has been fairly well watered on the PC of my mother.  I don't know what someone did to her the last time that they 'fixed', but kept getting tons of errors and do not load the system under profiles admin processes.

    The FIRST restory facotry was 'OK' he reinstalled the operating system, but unfortunately, a lot of mistakes that were there before, were still there this time... I thought it was weird... So I did another restore to factory image...

    That's when things went downhill even faster. Now, he is yet to start windows and I get errors xc0000225 Boot\BCD 0 right on turn on the machine after loading the BIOS...

    I started in the recovery partition and pulled the top quite prompt a chkdsk, which returned well... google the error and the attempt bootrec /rebuildbcd - he found the BONES, I have a key and press ENTER, restarted with fingers crossed and got the same error...  Tried to do /scanos bootrec after that, just to see if it took, and it did not find the OS...

    I googled some more and he was leading define me active partitions and all that... which makes me nervous in doing this... By looking at the partitions, the two were leaving them C: & D: are defined as 'primary', which I think might be a problem? But not sure... and fear to disconnected D: partition as primary, in the case where I need to start again in the recovery disk...

    I made another return to settings repair factory (maybe I should stop doing those?) ... and it is me giving the erorr and bootrec /scanos find the installtion windows on the C: drive. do you have an other /rebuildbcd and rebooted... even the boot errors... have you an other /scanos after that... once again not stated no identified windows installation.

    If the thoughts? Should I do another restore, then work with partitions?

    Hello

    You can create the Windows 7 installation disc (or install a USB Flash drive if your laptop supports booting from USB) yourself using another PC.  Download the Image file from the link below and save it in your downloads folder - the Windows 7 image source is Digital River).

    Windows 7 Home Premium 64 bit SP1.

    To create an installation disc, use an application like ImgBurn ( Note: you can deselect additional software during installation of ImgBurn offerings) to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

    Or you can use an application such as Rufus to create an installer USB bootable Windows 7 - minimum size for the flash player flash drive is 4 GB.

    When creating, tap away at the esc you key start Notepad to open the Start Menu.  Insert the disc to install Windows 7 (or USB stick).  Select the menu of Boot Options ( f9 ).  Use the arrow keys to select the optical drive (or USB key) and press ENTER.

    During installation, enter the Windows activation key found on the label of the COA in the request and one time installation is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want just a new installation of Windows 7 without additional software load normally delivered with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need, additional drivers and software are in entering either the complete model number or product of your laptop no here.

    Best regards

    DP - K

  • Pavilion G6 does not (Win7). Boot\BCD error, status 0xc0000225

    Hello

    My 4 month old Pavilion G6-2155sf cannot start. Normal start-up it is just stuck on the windows logo.

    If I press F11 I get this message:

    "Unable to start Windows. A recent hardware or software change might be the
    cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on "Repair your computer."

    If you do not have the disk, contact your system administrator or your computer
    manufacturer for assistance.

    File: \Boot\BCD

    Situation: 0xc0000225

    Info: an error occurred trying to read the boot configuration data. »

    Also, after pressing F2, I did a quick test drive and I got this result:
    DST short: FAILURE

    I'm off to my memory of end of study, internship next week and this computer is my tool, please help me

    Thank you for your time,

    Guillaume Belouch

    PS: No modification/installation of software or material or anything like that was made last week. Also computer had no access to the internet for a week, so I doubt that it can be a virus.

    P/N: B7G02EA #ABF

    S/N: {removed privacy}

    Windows 7

    Hello

    Unfortunately it would look as the volume is indeed corrupt, which coupled with the error of the DST, would tend to confirm that the drive has indeed failed.

    Now my best suggestion would be to contact HP immediately and get the HARD drive replaced under warranty - make sure you always have a set of recovery discs/media to reinstall the operating system on the new drive, if you have not, you should be able to order it at the same time.

    Kind regards

    DP - K

  • Impossible to put the recovery disk and Boot/BCD error

    Hello

    I have several problems, I hope someone can help me.

    While on vacation 7/12, I bought a HP 2000 - 368WM NotebookWindows 7Home Prem 64.eu at the time of the purchase, I did a recovery disk.

    1. After returning, I partitioned the drive, forget the hidden partitions. The disc changed to Dynamic.I, then removed the new partition. OK no problem, start Windows and I have used laptop with no problems.

    2. this weekend I tried to go back to the factory install and meeting boot\bcd error: 0xc000225 when I F11. The other F1 and F9 options work.

    3.I tried to make recovery disks and there no 3 x 1 disk check. HP Recovery Manager - system recovery, restore your computer to the original factory State is disabled.

    What are my options now?

    I can start and use Windows normally.

    Under computer management, when I right click on the drive of Reactivare recovery disk is gray.

    Thanks in advance for your help.

    Miss N

    Hello cloud

    I still couldn't see your link, but I searched and found this, http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html

    I used one, no option 3, and it worked like a charm. My drive is now in Basic system recovery option is returned in the HP Recovery Manager and I can boot into F11. So Bravo to you for motivating me to look for. Thank you. I did my recovery discs and all is well int universe. :-)

    Thank you

    Miss N

    P.S. No lost files, it took 2 minutes to do. I am very happy.

  • FILE: \BOOT \BCD - formatted status 0xc000000f for latpop error

    I formatted the hard drive of my laptop and has been installing windows 7 when it crashed at halfway.

    Now when I restart the computer its give the FILE: \BOOT \BCD - status 0xc000000f error.
    I tried recovery to start by inserting the windows startup disk, but as the system has no any OS, it is not repairable.  Tried the disc start recovery and orders bootrec quick functions.
    Can anyone suggest how I can fix it. Or is it simply because my laptop currently has no OS and thus this error?

    Test your hard drive for errors. If you have sector errors near the front or at the beginning of the disk, this could be the cause.

    Hard drive test - CD Bootable:
    Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
    http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    J W Stuart: http://www.pagestart.com

  • Boot/bcd error and no vista startup disk.

    I have vista 64. An automatic update downloaded sp2 and since then I get errror Boot/bcd. I have no bootable cd. Failed to get the manufacturer as computer is 3 years old and was a customized version of a society. I tried to use my laptop dvd backup but does not start.

    https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    How to get Vista recovery Media:

    Borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it's decent of Microsoft to introduce Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use it.

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    At soon Mick Murphy - Microsoft partner

  • Satellite L300-147 - windows fails to load \Boot\BCD

    When I turn on my laptop windows will not load. I do not have installation discs and I can not load in safe mode or anything. The file is \Boot\BCD status is 0x000000f. The info is "an error occurred trying to read the boot configuration data.

    Can you help me please?
    Thank you

    You can enter advanced startup settings with F8 at the start?
    Is option fix my computer available?

  • Toshiba Recovery media fails could not open e\boot\bcd

    I'm running the toshiba create recovery media on my satllite pro c660 - 21 d as my first job

    It askes for 2 dvd discs
    the use of new discs it failed with
    Could not open e\boot\bcd
    020123 f1-00000000
    I tried another disc, but if it does not work what then?

    Update

    The replacement drive was created without error must therefore have been a media failure

    but hope this helps someone else

    Post edited by: kenny825507

    Thanks for the comments. :)

  • Re: Visa does not start - \boot\bcd missing required information

    This morning, I tried to start Windows Vista on my Satellite Pro, and I get the following text appears on the screen: -.

    ----------------------------------
    Windows Boot Manager
    ----------------------------------

    Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

    1. Insert your Windows installation disc and restart your computer.
    2. choose your language settings, and then click "next".
    3. click on 'repair the youe computer.'

    If you do not have the disk, contact your manufactuer of computer or the system administrator.

    File: \Boot\BCD

    Status: 0xc000000d

    Info: The Windows Boot Configuration data file is missing required information

    -----
    ENTER = continue ESC = exit
    -----

    I found something similar on the Microsoft KnowledgeBase (http://support.microsoft.com/kb/927391), but according to the Windows Vista boot, all the proposed solutions require the installation of Vista media and I have just the recovery CD Toshiba base.

    When I try to boot my Toshiba Recovery CD, if I select "English (Windows Vista)" in the menu and go to the settings, the only selectable option is a scroll bar to choose what size I want to partition - for the option "Expert Mode: retrieves WinRE and the OS for the readers of the FIRST installation of TOSHIBA without affecting additional data disc" is grayed out.

    All I can do with the Toshiba Recovery CD is format the drive and lose all my data.

    I have a USB enclosure external that I put the disc in, and I have an XP machine that I can plug it in, then might be able to backup the drive but really the best option would be a way to fix rather than formatting.

    Does anyone have suggestions on how this can be repaired without the CD of Installation of Vista? Thanks in advance :)

    The Toshiba Recovery disk is not the same as the Microsoft Vista disc!
    Recovery disk contains an image that will not be able to repair your computer.

    The error message indicates that the Boot Manager is damaged or it s damage and you will need to boot from the ORIGINAL Microsoft vista DVD to repair it.

    If you don t have such a MS Vista DVD then I n t see chances to repair the operating system.
    So in this case, you need to reinstall the OS using the recovery disk.

    By the way; What happens if you press F8, immediately after the laptop has been started?

  • Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)

    HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f

    How can I solve it please, I have windows won start t all hekp would be much appreciated.

    Kind regards

    Yvouille

    Hello

    The following assumes that you are running Windows 7.

    If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.

    Windows 7 32 bit

    Windows 7 64 bit

    You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

    One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

    When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

    Bootrec.exe

    bcdedit/export C:\BCD_Backup

    c:

    Boot CD

    BCD attrib s h - r

    Ren c:\boot\bcd BCD.old

    Bootrec /RebuildBcd

    Bootrec /fixmbr

    Bootrec /fixboot

    Remove the rescue CD and try to restart the laptop.

    Kind regards

    DP - K

Maybe you are looking for

  • can I create a DLL file for labview that has DLL library with inside?

    Hello everyone, I am developing an application for the cards PCI devicenet in labview (beginner to labview) environment.  Is there a DLL file for the PCI card from the provider. But it's too complicated for a beginner to call each function in the DLL

  • Windows 7 menu drop down menus invisible

    Just upgrade from Vista home premium to version W7 Home premium and the drop down menus are not visible.  I can see an overview of the menus but no content or hotspots click.  This applies to the start menu (close on the menu drop-down) and the Outlo

  • Aspire driver V3 - 772 G Windows 8.1 USB 3.0 problem

    Hi all I bought my V3 - 772G 1 months ago about. Yesterday everything worked well and today, I noticed that none of the 4 USB ports were working (laptop was suspended since yesterday) No USB not connected, nothing. Key/mouse USB/hard drives /... does

  • unidentified network - local access only

    Hi, so I have this old Sony Vaio for four years, I used a wired internet connection for the past four years, until what we moved house and received a wireless router. our friend connected to me, and everything worked well, until I had to format the s

  • is microsoft word not included in windows 8?

    My main goal for the purchase of a new windows 8 lap top was to write articles, information for my business. Is it really Possible that I paid for this new windows 8 without a word processor. Really? Shannan O'Connor