0x08007F0F4 error code when you install the KB2686509 update
Were there any resolution to this problem?
If so, what is the solution?
see these topics for updates:
Tags: Windows
Similar Questions
-
Code Error 80070020 when you install the KB2756919 update
It downloads NO MORE than 11% and it's all FAILED EVERY TIME!
First, check the site Download of Windows for direct download on the update that gives you bad. Manually download your update from the following link, then right click on the downloaded file and run as administrator. Acknowledge the UAC warning and provide credentials if requested. This grant you elevated privileges that may be necessary to carry out the reconfiguration of the system.
Recommended if you can't always install the update, the next steps are to reset the Windows Update components or an update of the file downloaded a new attempt after performing a clean boot or boot without failure. A clean boot or Mode environment safe is important to ensure that there are no other programs that may be locking files or otherwise interfere with the upgrade process.Any Windows Update file can be manually applied using this method. To quickly access the correct download, just replace the # part of the link with the numbered part of the KB update #.http://support.Microsoft.com/kb/### -
Received the A12E1 error code when you install the adobe application manager?
Received the error code A12E1
Hello
Please go through the mentioned thread: http://forums.adobe.com/thread/1002413
-
Download 0x8007001F error message when you install the latest updates in Windows XP.
Original title: problems with the update of my compooper (computing)
Windows will not update it after updates KB2707511, KB2699988, KB2709162, KB2685939, KB2510531, KB2544521, KB2718704. I already got an answer to a clean boot and I did with no results, I also re installed IE8 with still no result. I get the 0x8007001F error code and all these updates keep in default even after using Mr. Fixit. This becomes a real headache. My computer is constantly freezing up and I lost my audio controls, it does not at the moment where opening tabs announces that there is a long list. Please, someone give me a remedy for this nightmare.
Your suggestion of a clean boot is not resolution, I first had to remove a virus with Norton and then install the latest version of IE 8, then updates went through. I also had to use the Norton Power Eraser program in order to irradicate of other inhibitory start-up problems which were deeply rooted in my hard drive. Thank you for your attempt to help me, but I was the one who had to understand this. Now, my computer is high and GREAT work! I would say that MSN and Norton to collaborate in trouble all program and incorporate into the program of Mr.Fixit you who will remove the virus and update at the same time in order to avoid such a period of long downtime for all customers who have similar problems.
Sincerely,
Clinton joints
-
error code when you install an important update
I have an update to download important for microsoft 2010 and every time I have try to install that I can't, it always gives me an error code and I try again and again and it will not always install so what am I, I guess what to do? Ive tried to remove it from my programs and it won't delete it
Hi BrittanyHutchinson,
As PA Bear suggested, more information is necessary for us to help you with the installation of Windows updates. You can follow the steps in the link below to run the troubleshooting Windows Update tool and reset Windows Update components to see if that solves the problem.
-
I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System
"Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.
LOG FILE:
_____________________________________________________________________________________________________________________________
Step 0-8
Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh
Step 4 of 8: UNIX making pretreatment
Running: chmod 777/db/oracle/OraInventory r
chmod-r 777/db/oracle/OraInventory succeeded
Step 4 of 8
Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".
PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015
runProcess_1
StatusString installation of Applications Technology Stack
Copy the temp area models
Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app
One-time fixes copy to temp area
Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is
/ App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory
Installation of WebLogic Server.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService
WebLogic Server successfully installed
Web Tier utility installation.
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService
Level successfully installed Web utilities
Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService
EBS registered successfully
Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS
patching
/ Home/appltest/Bea/beahomelist renamed successfully.
Application of ad hoc patches
With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml
L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService
Fatal error: T2K install Service
oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070
at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)
at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)
at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)
at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)
at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)
at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)
at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)
at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)
at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)
Can not install the unique patches
RW-50010: error:-script returned an error: 1
RW-50004: Error Code when you run the external process. Check the log file for more details.
It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.
Concerning
KasunA
Found a workaround. The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk
in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it. I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk. Then he applies the patches without problem. A symbolic link would do the same thing. -
8007000D error code when you install Service Pack 2
I get the 8007000D error code when you try to install service pack 2 for vista and I don't know what to do someone else help me with this
Thanks for the advice I did was download SP 2 separately (no Windows Update) and installed on the computer and it worked perfectly thank you a lot
-
0x80000FFFF error code when you install Windows Vista SP1.
Original title: I had a problem with service pack 1 on vista 32 bit [allways should I install
I had a problem with service pack 1 on vista 32 bit [allways should I install on the window update
Try this Fixit MS
0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update
-
I am re - install XP Media 2005 on my computer, all high-priority updates installed except 2.
Windows XP Service Pack 3 KB936929 not installing - error Ox87FF0004
Windows XP security update has not been installed - error Ox8007F0F4
No reason and how do I reinstall them?
You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/958051and
0x87FF0004
Http://support.microsoft.com/kb/950718 Error_Too_Many_Open_Files
-
error 0X800f0214 when you install the printer driver
When you install a printer driver (network), an error message appears saying that the action could not be completed - error 0X800f0214. The printer is shared and my firewall is set to off. I have absolutely no idea on what to do and would like to get advice and INFO.
Marc DS,
It would be useful to have a bit more information, such as the make and model of the printer, what version of Vista you are running and what type of network - wired or wireless (or both), if there are other non-Vista on the network computers, etc. You get the error message corresponds to "the specified path does not contain any applicable device INFs" which means basically the location where the OS is looking for the driver file does contain a valid driver file. There could be several reasons for this, but without knowing the configuration of network and printer, it's hard to identify. Make sure that the driver is one that is suitable for this printer model and your version of Vista and make sure that the path (c:\ - or other) is correct and that the location of the driver file is shared. I hope this helps. Please post back with more information if you still need help.Thank you, Gloria
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error message when you install the first elements 10 on my PC
I bought the Pack Adobe Photoshop Elements 10 and Adobe Premiere Elements 10... and when trying to install, have successfully installed Adobe Photoshop Elements 10, but get an error message when you try to install the first Elements 10. The Error Message reads as follows:
This installation package is not supported by this processor type. Contact your product vendor.
Now that? I don't know what to do from here.
Could you please someone get back to me? Thank you
Hello
Disc 1 contains the installer for 32-bit Windows.
Disc 2 contains the installer for Windows 7 64-bit.
Disc 3 contains the installer for mac OS.
Disc 4 is the content of the disc for Windows Adobe Premiere Elements.
Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.
You can install from Disc1, 2 or 3 depending on the operating system running on your computer.
Thank you
-
Error 80200011 when you install the Kodak printer software.
Original title: error 80200011
I try to install my Kodak printer software and I get this error 80200011 at the end of the installation process. Can someone tell me what this means and how to fix it?
Hi Treb20,
· What is the model number of the printer?
· You install the software from a CD or have you downloaded?
You can refer to the following articles of Kodak and see if they help.
What should I do if I can't install the software for my all-in-one printer?
-
Windows 7 - error Code: 80070643 (cannot install the Office updates)
Update KB982158 error 80070643___
Hi - I'm under Win7 pro with Office 2010 - new brand Toshiba, so not old stuff to get in the way. I tried everything to get the Power Point KB982158 update to load, but get the error code 80070643. Well, I hope that I have tried everything!What does work is: try to install manually. unloading and reloading PPt and try to update; tried the 'Fix - it' KB suggested for a similar problem (error different message -0 x 80070646); tried to check the registry keys according to http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/18449f60-c149-4eaf-b8e6-a2880cd7232b - the first two hits are as they are supposed to be, but under local_machine etc. There is no AppData, there is a CommonAppData whose value is % ProgramData
should I change the value of %userprofile%\AppData\Roaming?
or I'm far from base, is there another solution? afraid to touch anything without the advice of expert-thank you
Hello
You upgrade to Office 2010 or did you do a fresh install?
KB982158 is an update of security for Microsoft Office PowerPoint 2007. As you have already installed Office 2010, you don't need this update.
I suggest you remove all components of Office 2007 from the computer, including add-ins for Office 2007 from the control panel
and see if that fixes the problem.Follow these steps:
1. Click Start, then Control Panel.
2. click on programs or features.
From here you can remove office 2007 and its components.Refer to this link for help:
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-programI also want to mention that if you get the same error code when installing other updates, you can then follow the steps in the items listed
in my previous post. You can perform the steps of Vista on the computer Windows 7 from the first link. Also since the second link may be made
on a Windows 7 computer.You can also post the question in the Forums of Microsoft Office for assistance.
http://answers.Microsoft.com/en-us/Office/default.aspxKind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error code: 646 (cannot install the Office updates)
Original title: WindowsUpdate_00000646.
Update of security for Microsoft Office System 2007 (KB2289158)
Update of security for Microsoft Office PowerPoint Viewer 2007 (KB2413381)
Update for the filter of junk e-mail in Outlook 2007 (KB2443839)
I get the message of theses errors trying to do these updates. Help, please?
Hi caky51,
You are able to correctly install the other updates?
You can follow this link & check if it helps.
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Error code: 80072EFD (cannot install the Office updates)
I have windows update issues and my recently purchased Office 2010
Error: code 80072EFD = ERROR_INTERNET_CANNOT_CONNECT
Translation: Unable to connect to the Internet ServerIt is possible that a 3rd party anti-spyware, firewall, web Accelerator program, program of security/antivirus Internet and/or a proxy server interferes with the Services Windows Update (SVCHOST) to access the Internet.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941You forgot to mention what operating system of Windows that you are using including SP level and what internet security that you use.
Windows XP
When you access the update site, you receive the 0x80072EE2 or 0x80072EFD error.
http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=32&LN=EN&IsMu=falseVista
Windows Update error 80072efd
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072efdWindows 7
Windows Update error 80072efd
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-80072efdHarold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Maybe you are looking for
-
Since the update to 6,18 windows is slow and unresponsive
Hello. Since I updated to 6.18 last my Win8.1 (once a day) was sometimes slow and unresponsive, even if the Task Manager indicates that nothing is happening. It takes the Task Manager, 8 seconds to appear. Here, I see that Skype does not respond and
-
Two players created when connecting player Sansa Clip +.
Hi, I plugged the drive and there are 2 drives have been created: SANSA CLIPP (i), can I use to copy music on the drive, and Disk removable (j), which is unusable. No idea why? Windows XP SP3.
-
A problem with Windows Media TechnologiesWindows Media technologies has been blocked from running because it can prevent your computer from starting correctly in the future. Your version of Windows Media Technologies is incompatible with this version
-
Windows that 7 system 1240 is error, connects to windows 2000 server
I tried the solution of http://support.microsoft.com/kb/224287 HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\parametersEnablePlainTextPassword = 1 but he didn ' work -net use \\server / user: myuser mypass (successfully) -net
-
Installation of systems update uninstall Tvsucommandlauncher Windows XP errors