0x8100002f error code when computer backup Windows 7 Ultimate 64 bit

Similar Questions

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• Error codes when you use windows update 0 x 643

  Error codes when you use windows update

  Received error code 0 x 643 during the installation of update for Visual C ++ 2010 (KB2467173). What should I do?

  Hey Joe,

  You can check if this article helps.

  You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update

• Get the 0x8078012D error code when executing backup

  Original title: Windows backup fails, i/o device error
  ERROR:
  Backup Windows: Troubleshooting Options
  Check your backup
  The operation failed because of a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then retry the operation.
  Details: The request could not be performed because of an i/o device error.
  [^] Hide details [try to rerun backup] [modify backup settings] [Cancel]
  [Extended information]
  Backup time: 04/03/2013 23:51
  The backup location: \\LG-NAS\service\backup\ThinkPad X230T\system image backup\
  Error code: 0x8078012D
  
  
  -------------------------
  • Hello! I'm trying to save on NAS. I don't think that he has never managed to create a backup.
  • Windows 7 Home Premium 64
  • in the case where it is linked, I can't create or restore points.
  • I think that I recently received service Security Essentials finally run. thought that could launch something loose, but apparently not.
  • I sometimes 'Backup Windows cannot find the shadow copy of the source volume' error 0 x 80780020

  Hi Xicus,

  Perform the steps from the link below and see if it helps. 

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  Hope this information helps.

• 0x80000FFFF error code when you install Windows Vista SP1.

  Original title: I had a problem with service pack 1 on vista 32 bit [allways should I install

  I had a problem with service pack 1 on vista 32 bit [allways should I install on the window update

  Try this Fixit MS

  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414#letmefixit

• 0x800106b5 error code when you use Windows Defender

  I tried to re - start after this error code, but when you run Defender again, same error code came.

  Please see:

  Error message when you run Windows Defender: «Error 0x800106ba»

  and

  Sticky: Windows Defender and McAfee

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• get this error code when I use windows backup or set a date to restore 0x8007007B

  get the error 0x8007007B when I try to set the resrore or back up files is because I have given dell safe? Inspiron windows 7 64 bit

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can't use the backup and restore feature of Windows 7 and get error 0x8007007B.

  This can happen due to antivirus programs.

  I suggest you follow the steps mentioned below:

  Method 1:

  a. right-click on computer and choose Properties.

  b. click on the System Protection.

  c. in the list of available drives, see if you have a partition into two (2 times the same partition), one with the missing Word or missing.

  d. If Yes, uncheck this missing partition.

  Method 2: Turn off the antivirus

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• 0x800F0826 error code when you install Windows Vista Service Pack 1

  I bought Adobe Creative Suite CS4, so the installer tells me that I am in need of Vista Service Pack 1 to continue to install the programs. So, naturally, I go online and try to find the Service Pack 1. Mind you, I was never even offered the service pack via Windows Update... I wasn't even aware that they came out with ALL the service packs for Windows Vista. I am running Home Premium, by the way.

  So find a download of the Service Pack and it ends after about an hour and a half. I'm going to install the service pack, and everything seems to go well until a few hours later when I get back to my computer and I have a message waiting on my office saying that the installation has failed. I studied the error code I received online (0x800F0826), and I noticed that a lot of people said it had to do with the updates that had already failed to install on Windows Update. Well, a lot of commentators on the issue suggested looking in Windows Update history and are looking for any updates. Well, it turns out that I have TONS that had failed in the past. I read that the updates that had a different other than 0x800F0826 error code were probably the cause of the problem. Well, they ALL have a different other than 0x800F0826 error code.

  What I noticed though, is that all have the error code: 80070057. I was eager to get a glimpse of this problem pretty quickly because I have a class to come within 10 days that requires the use of Adobe CS4 software and I can not install it until I get the service pack work! Any help would be GREATLY appreciated! Thank you.

  Hi notpaul,
  If you have not yet resolved this so I will answer your questions regarding upgrade\restore.  If you have a bunch of updates failed and are not offered SP1, the faster would be to do a factory restore.  Then immediately, run Windows Update until you are offered are no longer updated.  Then you can reinstall the programs and data.
  If you want to upgrade to Windows 7, so make sure that you perform the custom installation.  This option will do a clean install of the operating system.  You will need to reinstall your programs and would need to make a backup of all your data before the installation.  Here is a link to Windows 7 install information. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 00000646 error code when you install windows updates and upgrades security for the windows desktop.

  When I try to download windows office updates and security of office windows dates I get an error code 00000646. I don't use windows desktop and I did not sign up for the windows desktop. could this way is not not the administrator of windows on my computer desktop, this is the reason why I can't download these dates?

  Hello

  Here's what I recommend:

  1 disable UAC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications.
  6. follow step 3.

  Let me know your results.

• 80070643 error code when you use Windows update

  I am running Windows 7 Home Premium - 32-bit. I get the error code 80070643 when you use Windows update - it fails on the Office Live add-in 1.5. I uninstalled .net Framework and reinstalled. Office Source Engine turned on, started work. Any ideas how I can fix it. I am running Office 2010 beta as well.

  Assuming that Office 2007 or 2003 is also installed, uninstall try Office 2010 Beta and once again. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• ox8ccc0003 error code when go to Windows mail

  original title: error code ox8ccc0003

  This error code is displayed when I try to log in to windows mail

  Check webmail access works, if you have this ability.  Beware also of the antivirus software interfere WinMail (see www.oehelp.com/OETips.aspx#3).  Try to remove your e-mail account, and then compact and repair the database (see www.oehelp.com/WMUtil/) and then add your account to e-mail back again.  Often, this solves these problems.

  Steve

• 80242614 error code when you perform Windows updates

  Original title: error code 80242614

  My computer did a restart on an update, then went black, and had to do a system restore to get back to normal.

  Hi Brenda,

  You can try the following steps and check.

  Step 1:

  You can check in the update history to discover the update failed recently and you can double click and search for the error code.

  See the Windows updates are installed

  Step 2:

  If you see an update failed with the error code you mentioned, refer to the following article to reset the Windows Update components and then try to download the stand-alone package with updates from Microsoft download center.

  How to reset the Windows Update components?

  a. to download updates from the Microsoft Download Center

  b. Enter the KB article number search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

• wmpkc32.exe and 0xC00D1199 error code when I start Windows Media Player

  Original title: wmpkc32.exe

  I run Windows XP.and my PC shows 0xC00D1199 and wmpkc.exe at different times or places. Are these interdependent? This happens when I want to launch Windows Media Player.

  Hello

  -Did you change your computer, after which the question began?
  -What version of Windows Media Player do you use?
  -Does the problem occur when you try to read a particular file or type when you launch Windows Media Player?

  wmpkc32.exe process belongs to malware and may violate your privacy. Please, scan your computer and remove potential threats using the Microsoft Safety Scanner.

  Note: You may lose the infected all data by eliminating malware.

  0xC00D1199: cannot play the file

  Windows Media Player cannot play the file because:

  1) you try to play a file that is NOT supported by the player.

  2) you try to play a file that the player does not support, but the file was compressed by using a codec that is NOT supported by the player.

  3) the file type is supported, but you try to play in a way that is not supported by the player. For example, you may have attempted to drag a DVD file with a .vob to DVD to Windows Media Player icon.

  I would recommend look you at this article and check if you play the file meets the criteria.
  http://support.Microsoft.com/kb/316992

• How to static ip configuration for computer laptop windows 7 ultimate 32 bit on area (locked setting ip Tcp/Ipv4 properties)

  My English is not good. I often meet customer mobile computer'customer use window 7 ultimate up field (not the working groups). They want to connect to the internet to work. These computer' laptop computer customer being locked setting properties ip address it guy in place they work. So I can't open affecting properties connection - Local static configuration network ip for them to connect internet work. ?
  Please help me. Thanks a lot of.

  Hi Trong,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• 0xc000007b error code when you open Windows Help and Support

  I am running Windows 7 Home on a HP G71-449WM laptop .

  It is a double question I guess.  I was troubleshooting my web cam doesn't work does not and was directed to reinstall a mediasmart missing file to test because I couldn't locate.  Tried this and it would not install.  Downloaded fine, but would not install properly.

  He suggested then I go to Windows Help and Support, and when I try to run I get the same code, there was an error and the program does not load error 0x000007b code.

  How to fix this?   I'm pretty comfortable with troubleshooting on mine, but I can't even solve the problems now.

  Any suggestions would be greatly appreciated.

  You can also try the system restore to go back until you have downloaded this file.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  http://www.Google.com.au/search?q=0xc000007b&hl=en&TBO=1&RLS=com.Microsoft:-to the: IE-address & output = search & to source = lnt & to TBS = qdr:y & to her = X & ei = g7ruTPryPJevcLK0lbIK & to ved = 0CAsQpwU

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Where install any software have you tried right clicking on the shortcut to the program, or the .exe or Setup.exe and choose the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  See if there are clues in these for your webcam problem.  Is it still listed in Device Manager?

  http://www.google.com.au/search?hl=en&TBO=1&RLS=com.Microsoft%3Aen-au%3AIE-Address&tbs=qdr%3Ay&q=HP+%2b%22webcam+Problem%22&btnG=Search&aq=f&aqi=&AQL=&OQ=&gs_rfai=

  If you have two different problems, then divide them into two positions may be a better way to go unless you think they are related problems.