0XC0000005 error printing "Lexmark Web gateway has encountered a problem and needs to close"

0xc0000005
Recent problems with my Lexmark X 7675.  After printing, I get an error message that says:

Lexmark Web gateway has encountered a problem and needs to close.

I think it's a problem with the latest Windows updates.  I use XP SP3 and that you have not seen this problem until this last week.

Find C:\WINDOWS\system32\spool\drivers\w32x86\3\lxdwwbgw.exe and delete or rename it so that it does not work.

This program sends just the stats of the printer for Lexmark.

Tags: Windows

Similar Questions

  • Why do I have the error, Act on the request, has encountered a problem and needs to close

    I have a program called law tax preparation on.  When I go to print a return, the window opens and bed the Enforcement Act"DEMAND" has encountered a problem and needs to close.  The choice to send error report to Microsoft to cancel.  I sent it to Microsoft several times and no answer on how to fix.  Also, have sent e-mail to act on the on the problem.

    Hi VickiSpittler,
     

    Try the steps listed in the following article and check if this can help:

    Help topic: error on Page / Script Error / error occurred

    If it does not, contact support act.

  • How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

    Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

    Hi heat110,
     
    -What is the brand and model of the router you are using?
     
    -You "Network Magic" software installed on your computer?
     
    Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
     
    Follow these steps to do the same thing:
     
    a. Click Start. Click run. Type Services.msc and press ENTER.
     
    (b) in the Services window, search for Pure Networks Platform service.
     
    c. right-click on the service and click on restart.
     
    d. restart the computer and check if you have got rid of the error message.
     
    Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.
  • Error message Popup Wuauclt.exe has encountered a problem and need to close. Send the error message or not. I've done both and can't get this popup go away

    A few days ago, I downloaded SP3 on my windows XP computer. and update the windows installer, eversince, then I have a reception an annoying popup message, which reads as follows: Wuauclt has encountered a problem and needs to close > we're sorry for the inconvenience. SEND a MESSAGE ERROR / DON "T SEND I have highlighted both send and not a thousand times and can't get rid of this annoying popup."
    What can I do

    Hi AgnesBradshaw,
     
    Follow the steps in the article to resolve the problem:
     
  • Microsoft Flight Sim displays error does not open "he has encountered a problem and needs to close."

    I had the FMS Simulator on my computer for some time. I tried to download an update and now I get this message. The program will not open or uninstall.  Says it can't read the file. If I try to reinstall a message comes to send a report to microsoft that I did several times. I also tried to uninstall, but that it went off the screen but it is still on my desktop with the same results. I installed it on an old computer and installed correctly there must be something in this computer.
    original title: FMS.exe does not open "he has encountered a problem and needs to close."

    Try to perform a system restore before the problem started. If this does not work, or if this isn't an option, try to reinstall the game.

    http://support.Microsoft.com/kb/306084

  • In windows XP Home Edition, running MS Office 2007, I get the following error: windows search protocol host has encountered a problem and needs to close

    Every time I have open internet explorer, I get the error message that the research protocol has encountered a problem.

    It occurs intermittently.  MS error report indicates a problem with searchprotocolhost.exe

    How can I fix?:  Anyone know?

    My recommendation, you use Windows XP, uninstall the Windows Desktop Search and never install it again.

    Option 1: In Add/Remove programs with the box checked next to 'Show updates' above checked locate "Windows Desktop Search 4.0" in the list and uninstall/remove it. "
       
    Option 2: If the above fails, you can use this method to remove...
      
    1. click on Start , type cmd.
    2. now, in the result of the research with right-click on cmd.exe and select run as administrator.
    3. type regsvr32 /u "%programfiles%\Windows Desktop Search" and press ENTER.

    For users of Windows XP for most it does, IMO, is slowing down the system.

  • Computer displays an error message that says "system has encountered a problem and needs to close."

    Original title: "system has recovered from a seriuos problem."

    I get an error message whenever I restart the computer that says "the system has recovered from a seriuos problem" and also when I click on any .exe file to restart the computer.

    Please let me know the troubleshooting I must perform

    Thank you & best regards

    Sashidara.O

    Hello

    ·         You use Windows XP or Windows vista?

    ·         What anti-virus program do you use?

    ·         Did you the latest changes on the computer before the show?

    You have posted same question twice, one in the category Windows XP and in Windows Vista, if you are facing this problem in Windows XP, you can read this article:

    A "System has recovered from a serious error" message after every restart.

    http://support.Microsoft.com/kb/317277

     

    The computer may automatically restart, or you may receive a "serious error" message or a stop error message in Windows Server 2003, Windows XP, or in Windows 2000

    http://support.Microsoft.com/kb/894278

    Follow these methods to solve the problem in Windows Vista:

    Method 1:

    I also suggest you to download and run the latest Microsoft Scanner on your computer and check to see if it helps:

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

    Method 2:

    Also, try to perform the clean boot and check if it helps.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135/en-us

    Note: Don't forget to start your machine in normal mode by following step 7 of the link.

    Method 3:

    I would say as you try to perform the SFC (System File Checker) scan on your computer and check.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

     

    http://support.Microsoft.com/kb/929833

  • How can I fix the following error message: The Print Shop 3.0 (or other program) has encountered a problem and needs to close.

    Print shop does not open. He was relocated several times.  Every attempt to open the following the error messge program appears: The Print Shop 3.0 has encountered a problem and needs to close.

    Hello

    Check the event log information when you try to start printing 3.

    Procedure to view and manage event logs in Event Viewer in Windows XP

    http://support.Microsoft.com/kb/308427

    Resolution:

    I suggest that you start the computer in a clean boot with printing 3.0 active state.

    See the link below to perform the clean boot in Windows XP.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note:

    How to configure Windows to use a Normal startup state

    After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

    1. Click Startand then click run.
    2. Type msconfig and click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services, and then click OK.
    4. When you are prompted, click restart to restart the computer.
  • NTVDM. EXE has encountered a problem and needs to close when I tried to open a dos based program today. Is there any solution on the web?

    I use a dos program of basis for the drafting of the accounts. This gave all of a sudden the error today: "NTVDM. EXE has encountered a problem and needs to close"I use Windows XP Professional SP2.

    Hello Eric,

    Take a look at this article to see if it helps:
    Troubleshooting in Windows XP MS-DOS-based programs
    http://support.Microsoft.com/kb/314106

    PS Questions should more properly be addressed to a subforum of Windows XP
    as http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/

    and btw, your system must be on XP Service pack 3

    See Windows XP Service Pack 3 (SP3): Installation Guide
    http://aumha.NET/viewtopic.php?f=83&t=33296

    also information for Windows Xp Service Pack 3 (sp3)
    http://www.bleepingcomputer.com/forums/topic146857.html

    Space hard drive for Windows XP Service Pack 3 requirements
    http://support.Microsoft.com/kb/947311/

    Support for WinXP (x 86) SP2 ended July 13, 2010. After this date, the computers running Windows XP SP2 (x 86) "will no longer receive software updates from Windows Update" (automatic updates will not work and the Windows Update Web site is not available) until SP3 has been installed.  Extended support for WinXP SP3 will continue through April 8, 2014.

    Does that mean if my version of Windows is no longer supported?
    http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean

  • Cannot install 2 black & white or command conquer games. Error:Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

    The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.

    The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »

    To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition

    Hello

    Were you able to install these games without any problem before?
    Step 1: Install all updates of windows on your computer and check the number.
    Reference: http://support.microsoft.com/kb/306525 

    Step 2: Copy the game on your computer, then check the issue.

    Step 3: Perform the clean boot your computer.


    From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
    Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135
    Note: To restore your computer to a Normal startup mode, follow these steps:

    1. click on start in the box start the search.
    2. type msconfig and press ENTER.
    If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.
    3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
    4. When prompted, click on restart.

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »

    original title: nwiz error at startup

    I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.

    I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:

    At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.

    I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.

    Thank you

    lostisfound

    Hello

    The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    Reference:
    How to manage devices in Windows XP
    http://support.Microsoft.com/kb/283658

    How to solve the problems of hardware with Device Manager
    http://www.Microsoft.com/windowsxp/using/Setup/learnmore/devicemgr.mspx

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • At startup, Error Message: dd.exe has encountered a problem and needs to close

    Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.

    "dd" is - in this list.  Looking more far over the line to SD in this list...

    What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?

    (Only for the DD.)

    You could uncheck here, restart and see if it happens again (it will not).

    Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.

  • Spooler Subsystem App has encountered a problem and needs to close

    We cannot print anything on my computer. the message is that the Print Spooler Subsystem App has encountered a problem and needs to close. How to get the print spooler to run and work my printer start?

    Hi Saeed,

    1. were you able to use the printer before without any problem?

    2. did you of recent changes on the system?

    3. What is the brand and model of the printer?

    Method 1:

    You can try to start the Fixit from the following link and check if it helps.

    Problems printing and printing errors

    Method 2:

    You can also read the following article and check if it helps.

    You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  • "WMI has encountered a problem and needs to close."

    Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
    In the application log:
    Source: Application error
    Event ID: 1000
    Category: (100)
    Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

    Any ideas?

    Hello

    Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

    I hope this helps!
  • "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

    Hello

    Uses a deployment tool to deploy the patches in the environment, and this time after doing so I am getting an error below

    "update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.

    Please help its critics.

    Concerning

    Vikram

    It is a forum for specific consumers.

    You will find appropriate support (such as it is) in this forum-online http://social.technet.microsoft.com/Forums/en-US/itproxpsp

Maybe you are looking for