0xc000000e error - no recovery disk

Similar Questions

• Got the error using recovery disk to reinstall Windows 7

  I write this cause maybe it could be useful to someone in the same situation I was.

  After the events of my Z930, I decided to reinstall my laptop to the State of Out-Of-Box. In my first time I got an error, that I didn't understand, so I did on the second attempt:

  1 extract in the Bios and set the COMMAND SATA COMPATIBILITY MODE
  2 erase all SSD, data, partitions, sectors... etc ALL

  The second attempt was successful!

  Usually if the problem is option SATA solution should not be the BIOS option change but load SATA driver before Win7 installation begins. With SATA option enabled (no compatibility mode) HARD drive works correctly and with maximum efficiency.

  Your solution is just solution and a sort of temporary solution.

• Attempt to start in the recovery environment gives 0xc000000e error - "device is not accessible.

  HP Pavilion g4-1117dx laptop computer 4 GB, Win 7 Home Premium SP1 64-bit running

  Tried to boot into the recovery environment through the HP Recovery Manager (v 2.0.9.0 Rebecca.exe 3/25/12)

  However, I get to the Windows Boot Manager screen that says error 0xc000000e - device is not accessible

  I scanned the partition HP_TOOLS for errors, including an analysis of the sector, but it does detect any errors.

  FYI - I have repair disks that I created.  Is it possible to repair or recover only the partition HP_TOOLS?

  Just to be clear, the problem is with my Recovery partion only.  Win 7 in main boot works fine.

  Suggestions to fix or repair, please?

  Don't know what else to suggest other than using recovery discs to reinstall. If you have recovery disks, the recovery partition is not really necessary, more a convenience than using disks, that's all.

• Satellite L500-12F - error creating Toshiba Recovery disk

  Hello. New user on the forum and the new owner of a Toshiba.

  I am trying to create the 4 recovery disc for my Toshiba satellite L500-12th. Disks 1, 2 & 4 created with success, but 3 disk failed twice. The message I received was on the screen: cannot read the following file: F:backslash ZZImg backslash 09753xsp6.swm error Code: 020150-20-00000000
  (I can't type a backslash in this window of the computer)

  Anyone know of a solution or a similar problem?

  Dwight

  Hi Dwight,.

  The disks that you use to create the Toshiba Recovery disk?

  I have a good experience with Verbatim DVD-R. Have you tried these discs?

• Satellite L30 recovery disk failed: could not do language input error

  I have a L30-101, which has been slow to turn on. Another forum suggested going in ms config to ensure the maximum memory used to initialize and uncheck that some elements to start. When I rebooted, windows icons have been expanded and slightly blurry, so I undid the changes I did but windows is still not clear. The laptop works well otherwise, so I recorded that restore data, I needed and tried a system, but the computer can't find any restore points.

  As a last resort, I tried the Toshiba product recovery disk which I had never used it before. He begins to read it ok, then asks for the choice of the English language. About 10 minutes later it stops with the error message "could not get a writing of the language of the INI file! Article: [Commom] key InstallCMD file D:\Setenv.ini.
  When I hit OK to clear the message the Administrator page says could not initialize the raid class no RAID-continue normally.

  When I restart the laptop it brings back me to my previous state with blurry icons, another way to work laptop and all my old data is still there.

  I have since bought a new portable Satellite L450D that I write this, but I'm eager to try to lift my L30 and working again as a spare. I contacted Toshiba UK in case there was a problem with the recovery disk, but due to licensing issues they can only redirect me to the support of EU toshiba backup site to buy a new recovery disk. As I already have a recovery disk, I don't want to buy another for the same results. Does anyone have ideas on how I could get the recovery disk to load entirely and recover my laptop to its factory settings?

  At first, I must say that you should back up all your important data to an external device like external HD or USB. When you use the recovery facilities disc all the partition is deleted.

  I don't know why you cannot use livery recovery disk, but the only thing to do is to visit nearest Toshiba authorized maintainer and show the problem. If they can confirm recovery DVD is defective, I assume that you will get a new free of charge.

• Error when reinstalling windows from recovery disks

  My laptop crashed and could not find Windows, so I ordered a recovery disk (TR-IM00209299 - Win7 64 bit HomePremium (NH) SP1) through Toshiba recovery media shop. Now that I got the Windows 7 recovery discs, but they do not install successfully, and I'm not clear if there is an error on the discs I received or a problem with the hardware. Here are the details of the error. Is it a mistake that some of you know? Please notify

  Unpack the system/Windows re...
  L ' ImageX for Windows tool
  Copyright Microsoft Corp. All rights reserved.
  Version6.1.7600.16385

  Error opening file V:\HDDRecovery\SWImg\15583XSP.swm
  These data are incorrect.

  ERROR: ImageX could not apply system/WinRE V:\HDDRecovery\SWImg\15583XSP.swm index 1 of the HARD drive to W:!
  Press any key to continue

  Are you able to boot from other bootable disks?
  If so, then it means that your hardware (optical disc ODD) should be ok and the problem is associated with disc.

  Contact the reseller of disc (Arvato?) and ask again drive

• Creation of recovery disks ends with the error message

  I tried to create a recovery disc but got this message "cannot read the following D:\06491XP file. Water hydraulics Error Code: 020150-20-00000000 "at half way through the first DVD disck.

  That means and what I can do to create a recovery disk?

  Thanks for your help

  Hello

  You have linked to burn using TDK or Verbatim DVD-R? You see, some media only good acceptt cd/DVD burn :)

• Satellite U205-S5034 - error when you try to create the recovery disks

  Hello world

  I have problems with the TOSHIBA recovery disk creator. When you try to create the recovery disks this error pops up:
  An unexpected error has occurred. Exit this application and start it again. (Error code: F1-0F00FE-00000002)

  The machine is a Satellite U205-S5034 under XP Pro SP3.

  Any help will be greatly appreciated. Thank you and have a nice day.

  DaveMatt44

  Hello

  What kind of DVD that you use to create a Toshiba Recovery disk? I have tried Verbatim DVD-R and TDK DVD-R and never had a problem with these discs. A friend tried DVD + R and he couldn t create a recovery disk. After he tried DVD-R and everything was fine but I do not know why this happened.
  So please try other discs.

  Also, check the Toshiba page for an update of the firmware of the CD/DVD drive. Maybe it will help you.

• Satellite Pro L300 PSLB1A: Recovery disk doesn't work no-error 0xc000000f

  I get error 0xc000000f on restart and if I try the recovery disk I get error error: 10-FC12-0241
  operating system is vista professional and toshiba laptop L300 PSLB1A - 02S 008

  Hello

  You mean that you cannot start the laptop using the Toshiba Recovery disk you created?

  Go into the BIOS and check if the CD/DVD drive is recognized. It should appear on the first page of the BIOS.
  If the CD/DVD drive is not listed, then you should set the compatible SATA mode and must save the changes.
  After this attempt to boot again from the recovery disc.

  I also searched on the Toshiba driver European page for info and found a few details;

  There is an update of firmware for CD/DVD TS-L633A and TS-L633P player.
  This Firmware solves "sometimes not able to writing on DVD + R media'.
  The problem occurs only on DVD + R media, other media type have no problem.

• SATELLITE A30 ERROR! AFTER THE INSTALLATION OF RECOVERY DISKS

  INSTALLED BOTH DISKS AS MANUAL... GET THE ERROR MESSAGE... AT THE END OF DISC 2. CAN FIND NO WAY OUT OR FOLLOWING THE INSTALLATION... REMOVED DISC SEVERAL TIMES AND BEGAN THE PROCEEDINGS WITH THE SAME RESULT. NO ERROR; MESSAGE 437... ; CANNOT READ THE FILE... LOADS OF OTHER WRITTEN IS ALSO ON THE SCREEN... I THEN PRESS ESCAPE; AND HE LOOKS LIKE HE NEEDS A CASE NUMBER? NOW I REMOVE THE DISC; I CANNOT START THE SAME PROCEDURE TO NEW NOTHING WORKS ON PC...
  DISKS CAME WITH THE PC AND I'VE USED THEM TWICE MORE EASILY
  LAPTOP CODE A30 (PSA30E) 14 OLD WORK OK SOMETIMES SAID HE WOULD HAVE TO CLOSE BECAUSE THE GENERIC HOST HAD ENCOUNTERED A PROBLEM... RECOVERY DISKS ARE NOT SCRATCHED CAN ANYONE HELP?

  Hello

  upgrade your laptop with a special as material upgrading of RAM or else!
  It may be that an upgrade of hardware are problems when you use the recovery of th disc!

  Alternatively, you can try to reset the default BIOS settings.

  Sammy Bye

• Satellite Pro A300-1 has 8 error received trying to create Recovery Disk 2

  I just got my new laptop A300-1 has 8 today and as recommended in the manual I tried to create the Vista recovery disks using the recovery disk pre-installed program. I created the 1 disc successfully, but when I tried to create the disc 2, it worked a little, and then I got an error:-

  File not found: -.

  F:\06477XSP5. STORMWATER MANAGEMENT

  Error code: -.

  020150 20-00000000

  Any help to solve, such as Iif I can't create the disc, it looks like I might have to return it...

  My apologies if this has been previously answered, quite new to all this.

  Thank you very much.

  Are you trying to use DVD-R virgins?

• Satellite L300 - error if I try to create a recovery disk

  I was trying to create recovery disks for my new L300, but after a few minutes, the program stops and receive Error Messages (boot.wim is not). Yet once, I tried to create through other DVDs of brand as Philips DVD - R, Imation DVD - R, Sony DVD + r etc.
  Can you please help with that?

  I can't find the Verbatim and TDK DVD in our market closest to try these marks too.

  Hello!

  I have a Satellite L300 too and didn t have problems to create the Toshiba recovery disc. I used DVD - R Verbatim media and usually got the best experience with the manufacture of DVD and DVD - R types.

  In your case, I would try this DVD media or the TDK DVD-R discs. If you can find t he on the store closest to the computer you can also order it online. Take a look on Amazon or eBay, here, you can order these media.
  It s worth a try! ;)

  Good bye

• My recovery disk multimedia creation error

  I have a new Toshiba Satellite C675. I am trying to create my recovery disks.

  He says that I need for this 6-disc but Disc 1 won't end up creating, I keep getting an error that says... Cannot read the next file. D:\ZZImages\ZZImages\PREINST4. Stormwater management (error Code: 020150-20-00000000)... Anyone have any idea what this means and how I can fix this?

  E-mail: [[email protected]]

  Thank you... Angela

  Hello Angela

  In the past I ve created recovery for many models of different laptops, but I've never seen this error message.

  Can you please tell us what blank media are you using?
  My experience is that the use of DVD-R media only works perfectly, especially if you use well-known brands like TDK or Verbatim.

  In any case, please check what people wrote on the forum we Toshiba. Maybe this will help you - http://forums.toshiba.com/t5/System-Recovery-and-Recovery/Error-creating-recovery-DVD-s-on-Satellite-L505D-ES5025/td-p/108013
  Please send comments.

• Satellite A135-S4666 - recovery disk displays an error message

  The hard drive crashed while I replaced it. I am trying to use the recovery disk to take the computer to the "out of the box configuration.

  I chose to 'recover' rather than erase the hard drive based on this choice. Then it copies the files from the first disc and pushes me to the second. After putting the other continues to copy files. Finally, she moves more to 'recover now' she does and seems to be using the hard disk newly installed something between 35 and 50% of the task. At this point, I get an error message stating "error recovery" and invites me to press ok to shut down the computer and spits out the CD. The error message is coded 10-FC12-0002. I tried 4 or 5 times with the same result.

  Am I supposed to use disc erase first, and then use the recovery mode since it is a new hard drive? Or I have a defective recovery disc?

  Any comments or ideas would be greatly appreciated, I do not get the case at this stage.

  Hello

  It's not easy to tell if it s a recovery disk problem or if the new HARD drive is the problem. Have you tested a Microsoft disc for example? If the disc of Microsoft is, it seems that your recovery disc is noisy and needs to be replaced. Otherwise the new drive HARD cause this problem.

  Check this box to determine the cause of this problem!

  Good bye

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?