!! 0xc0000022! Error during installation of Windows Vista SP2
The story begins with me start installing Service Pack 2. I step back and let my computer to do its thing for a while. Finally, after restarting, it's a black screen with a white typing up saying how much it is downloaded to 56000-some records. It is relatively fast until I have enter the 54000's. Then, it freezes and top left, this is (without the quotes): «!» 0xc0000022! ». I cannot toggle NumLock and have to restart my computer with the power button. Then there's this long spiel to him restore my data because I turned it off in the middle of an update. And then I get to square one. Any help? Please?
Hello
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
Tags: Windows
Similar Questions
-
"Not enough space" error windows install during the installation of Windows vista SP2 software
Original title - cannot install Windows Installer 3.1 on Windows Vista Home Edition
I use windows vista home with service pack 2 installed. I have a custom made software. Before installing this software, I need to install 4 i.e. cystal reports, dotnet, report viewer and Windows Installer 3. I was able to install the first 3, but the windows installer fails, it is said to be "saturated". I also tried MSI 4.5 but of no use. My software runs well on Windows XP. The interesting thing is that I return this software a year and I installed it on vista and it worked fine. Now I have re-installed windows vista on my computer and had updated. Now this problem. Could there be a reason why some update to windows vista, I installed now wasn't there last year that causes the problem. Can anyone help.
Hi tbilal22
Windows Installer 4.5 comes pre-installed with Windows Vista and Windows Vista SP1. Please refer to the article for more information-http://support.Microsoft.com/kb/942288
It is possible that the old software, it is not compatible to be used with Windows Vista SP2. I suggest you try software installation by using the Windows Vista or XP on Windows Vists SP2 compatibility mode and check if you are able to solve the problem.
Compatibility mode is used if a program written for an earlier version of Windows does not work properly. Then, you can use the program compatibility Wizard to change the compatibility of the program settings. To manually change the settings of a program, use the individual program's compatibility tab
You can check the link for assistance on compatibility mode - mentioned below
http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows
I hope this helps.
-
Original title: "WindowsUpdate_00000490" "WindowsUpdate_dt000" Vista Service Pack 2 update
I tried to install Vista service pack 2 (32-bit) and I get the following error "WindowsUpdate_00000490" "WindowsUpdate_dt000" I tried to install with my anti-virus disabled and uninstalled and still it will not be installed. He always tells me item not found, error: ERROR_NOT_FOUND (0 x 80070490). What should I do?
Hello
You can try the steps in the following article and try to install the stand-alone package for Windows Vista SP2.
You can also consult the following articles and check.
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
-
I have two Toshiba laptops, and both died after the installation of Windows Vista SP2
I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.
Any help will be appreciated. I really need help.
Thank you.Well, try this:
- If the power is off.
- Start the laptop and keep press F8
- then select restore.
And? :)
-
Error code: 8024200d on Windows Vista SP2 update (6 fails)
Operating system: Windows Vista SP2 (x 64)
6 updates are "missed" - KB2345886-KB2378111-KB2443685-KB967723-KB970430-KB972145
I tried to install tool (KB947821) system update but still the update to fail.
Any solution on how to clear this error and get the update of Windows to work?
Thank you for your help.
Hello
I suggest you follow the link to error code you found below.
http://support.Microsoft.com/kb/947366
After you follow the steps in the link above, download the updates from Microsoft Update Center.
You can also check out the link below.
-
Fatal error during installation of Windows Live Writer
A few days ago MSN prompted me to update my MSN to the latest version. I did and after the update, I noticed that I could not install Live Writer. I tried many times and I'm still stuck.
I received an error message stating:
"Fatal error during installation. .
Please close all other open programs, and then try again. It looks like a another program prevents the installer to work. HR:0 x 80070643 "
Help, please. Thank you.
Hello twmagee,
Since you have problems with Windows Live Writer, it is best to post in the forums of Windows Live Writer.
Click here for a link to their forum.They have experts and available solutions in their forums.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Computer will not start after the installation of Windows Vista SP2
After downloding and installing Windows Vista SP2 on ACER laptop for my daughter, I can no longer start the computer. Initially registered startup C:\\Windows\System32\drivers\ecache.sys as corrupt file repair. Change BIOS to boot first from the optical drive and the departure of computer with Vista DVD in the drive, I accepted the option repair. No chance that the machine always fails to start and always displays the window "Statup repair." Auto repair is always unsuccessful. Repair suggestions will be appreciated. Thank you. Bob G.Support Microsoft still offers a FREE support for Vista SP2. Go to: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1 where they will help you.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Get the 80070026 error during the installation of Windows Vista SP2
Everyway that I try to run my automatic updates for windows I get the error message with the error Code 80070026. I have Vista service Pack 1. I do not know there is an update for me who keeps my computer at risk or with this problem.
I've also disabled my anti-virus (3rd party firewall) and tried to install the update. I get the same error.
Advice or assistance on the issue would be greatly appreciated.
https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1
«Assistance free unlimited installation and compatibility is available for Windows Vista, but only for Service Pack 2 (SP2).» This support for SP2 is valid until February 26, 2010. »
Use the link above for Vista SP2 support.
And for other Windows Update issues:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
system information:
Windows vista edition Home premium
2007 micro.corp. service pack 1
Manufacturer: Hewlett-Packard
model: compaq presario CQ61 notebook pc
ORP of 32 bits. sys
Processor: cpu t3400 2.16 GHzAnd the error was...?
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).
=====================
In no order given...
How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
[0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
http://support.Microsoft.com/kb/947366Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
http://support.Microsoft.com/kb/9712040X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
http://support.Microsoft.com/kb/947821Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
http://support.Microsoft.com/kb/967818The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
http://support.Microsoft.com/kb/949358~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
What is the problem... How about this...
Hi dp % 20 Bob.
Please refer to the forums thread where the same issue was addressed installing lightroom 6 on windows 7 get interface requirement not met windows vista not supported
Please, try the steps mentioned in this.
Hope this will help.
-
Error 80004005 by installing Windows Vista sp2 x 64
I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation. Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
1000 gigabit hard drive
Type system in Windows Vista Home Premium 64-bit
Graphics card: NVIDIA GeForce GT130This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.
Should I try to reuse the recovery disk? I don't want to make things worse.
Thank you, Debbie - the technical support for all your help.
I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files. -
Original title: try to put wrong question ID problem!
Due to problems of Java, I formatted and made a new installation. My Vista Home Premium says its active. When I try to put my product id was not found. When I try to leave microsoft to find that they can't pick up my computer and I can't enter by hand, he said its incorrect. When I try to ask online chat, I cut that they deal with activation problems. It is activated, I can't get the Web site recognize my product id, so I can post for help? The world is - that sound familiar at all?
I have fatal routine Java errors when I play a game Runescape. I'd appreciate any help anyone could give me. Thank you
A fatal error has been detected by Java runtime environment:
#
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc = 0x6d884dca, pid = 3032, tid = 2976
#
# Version JRE: 6.0_30 - b12
# Java VM: Java hotspot Client VM (20, 5 - b03 in mixed mode, sharing windows - x 86)
# Problematic frame:
# V [jvm.dll + 0x94dca]
#
# If you want to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
#Hi Verisetti,
Have you installed security software after formatting windows?
If so, you can uninstall the security software temporarily and check if you receive the access violation error.
If the uninstallation of security software solves the problem, you may need to configure the settings of the software of safety accordingly. Please contact the software vendor for assistance in this regard.
Note: Make sure that you install the security software after the trial.
What about Windows vista product ID, you can try to validate Windows and check if it helps.
For more information, see the following articles:
-
Original title: I can't access my pc please help!
I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.
The computer restarted unexpectedly or encountered an unexpected
error. Windows Setup cannot continue. To install Windows, click
'OK' to restart the computer, and then restart the installation.I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
I need help really bad.Kind regards
Darius Oisin Reyes
Hi, Mary
I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.>:-( >:-( >:-( >:-(
Boot from the Windows 8 DVD or USB media that you created
Click Install now
Accept the license agreement
When the option is displayed to select a type of installation, click (Custom advanced)Select the disk partition where you want to install Windows 8 click Next.
You will receive the following warning:
The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.
(At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK
The installation program will now begin installation. During installation, your computer will be restarted several times.
Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.
You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.
-
Error during installation of Windows 8
I get this during the installation of Windows 8 in ESXi. My ISO is bad? Please see attached.
I've seen many cases like this recently and it has something to do with the Download Manager, truncating the links and corrupt the image... Try to download the image again, but make a direct download instead of using the MIcrosoft Download Manager.
-
Error during installation of Windows Server 2003
I installed VMWare Player, however, when I went to install Windows Server 2003 (easy installation) on my windows 7 Home Edition (64-bit) as owner / administrator.
The VMWare authorization Services do not seem to be started, but when I try to start them via the services.msc, I get the following error:
"Windows failed to start the service on Local computer VMWare authorization Service.
"Error 1067: the process terminated unexpectedly."
I studied this error and saw a few notes on adding __vmware_user__ my users the. But with what privileges?
I also saw a few notes on execution of "regsrv32 vmauxx.exe" which does not work on my computer.
Any ideas on how to proceed?
Thank you.
Lee
Welcome to the community,
Installing on Windows 7 is sometimes delicate. Take a look at http://faq.sanbarrow.com/index.php?solution_id=1113 to verify that your installation is ok or how to fix it in case it is not.
In addition to the installation of VMware Player, I suggest that you install the guest without using "Easy Install".
André
Maybe you are looking for
-
Satellite Pro L300 will not start after the Bios Update
Help please. I simply formatted laptop Satellite Pro L300.I used all the drivers updated Toshiba and everything is fine. I then updated the bios with the latest version.After this laptop computer is unbootable but continues to scroll through the star
-
After 4.4 my Batt. / hour and the signal remained blue
After the update to 4.4 KitKat on my Droid Maxx I noticed that my battery, signal and the time remained blue? I know the KitKat update was supposed to bring the white/gray color to the notifications/status bar. I saw another comment on that person. M
-
How can I remove a file for LabVIEW does not keep a copy in memory?
After I use the command "Delete" files Advanced features, and then create a new file with the same name, LabVIEW must have the original in memory because the file continues to grow and is not what I want to do. I tried the deallocation "request" for
-
The door on the DVD tray opens when you press the button. Aspire AX3300
How the DVD tray are accessible when the door does not open? Anyone know?
-
How can I change the settings in the registry
How do Ichange registry settings