1 channel of my audio is crossing on the WME 9 flow

I use Windows Media Encoder 9 for videos.  The problem is that only 1 channel is broadcast, while the other channel, periodically fades to low.  2 audio bars both show also on display in WME during encoding.  How can I start to find a solution for this?  Thanks in advance!

Hello

I suggest you to ask your question in the community of Windows Experts for assistance.

http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/default.aspx

Hope the information is useful.

Tags: Windows

Similar Questions

  • I have files mp4 with 4 audio channels, but when I import it into the first it shows only a single channel

    I have the mp4 with 4 channel audio file that is not in the audio channel. When I import in the first it shows only 1 channel. In the project window, I try to find other audio channels on option audio channel (Edit-> audio channels) but it shows other channels. How active other audio channels and retrieve audio sound?

    When you go to interpret, I chose multichannel, then specified 4 tracks.

  • CS3 - adjustment of the left and right channels of an Audio track separately

    I think it's a very stupid question.  I know how do in Avid and FCP, but for the life of me can not understand at first.  I cut a clip and laid it on the timeline.  Now I would like to adjust the audio levels of the clip independently, but there is that one line, passing through the audio clip, and it adjusts the L and R channels at the same time.  Nowhere, not even in the track properties, can I select only the L channel or R channel alone and make this channel upwards or downwards a little without affecting the other.  L and R are grayed out and not selectable.  The properties of the show clip it is stereo, the project settings are stereo, and I was not able to find any info on this problem in the forums here or in the help tool.  Except for something 2 I fell that said that we must go in the settings of the Master Clip and create Mono 2-track stereo channels until you place it on the timeline, but it would be crazy to have to do this for each stereo clip you import ever!  And that makes no sense - "mono" means 2 channels are the same, how can you have two channels "mono"?  What would be the purpose, you only need a "Mono" channel to go to your 2 speakers.  And I don't mean each mono channel to do in any case, I want it to go to the left and R only go towards the right side channel L!  Maybe they use bad word "mono"?  Or maybe I'm a fool and quite simply do not get something (most likely).

    In any case, I'm really confused here, especially because I can't believe that you go through all these steps for each unique stereo clip you work one day with... I must be missing something really simple, right?

    IN SUMMARY:

    I capture a stereo clip HDV

    I have load to the Source window

    I got a point in and an out-point

    I insert my clip on the timeline

    I noticed the channel audio left is too high and the right audio channel is too low

    How to lower the left channel and raise the right channel?

    Stupid question, I know.

    In Avid or FCP you go to audio level "line through the center of each channel and adjust at your leisure

    TECHNICAL DATA:

    Windows Vista (with latest updates)

    Premiere Pro CS3 (with updates)

    Intel Core Duo 2.8 Ghz processor

    2 GB of Ram

    NVIDIA Geforce 9500 series (I think)

    Intel integrated audio system

    External USB hard drive holds my media/project files

    Sony HCR9 connected via firewire for capture

    Stanley,

    I do similar, but separate channels in hearing and import the mono files resulting in PrPro.

    Good luck

    Hunt

  • Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

    I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

    When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

    So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

    Any ideas why SOUL would not pick up the two audio tracks?

    Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.

  • 1 single audio track is from the Source monitor?

    In CS6 on a Mac, my source monitor shows 2 channels for my audio, but when I click on and drag the audio only button in the timeline, it takes only one of 2 audio tracks. Why is this? I can drag again to get a second track, but why didn't he brings them both at the same time?

    Thank you.

    You can tell looking at the speaker icons in the header of the track.  You will see one of the mono tracks and two for stereo tracks.

    You can also tell by looking at the waveform.  Mono, will show stereo will show two.

  • My Yahoo cursor has changed to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back?

    My Yahoo slider went from arrowhead to a diamond with a cross in the middle and nothing in the pick - able (?) groups. How can I change back? 8.1 (latest) Windows and FireFox (latest).

    You're not referring to auto scroll?

    • Tools > Options > advanced > general: navigation: "use autoscrolling".
  • I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

    I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

    First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

    Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

  • Is an mp3 player or how to turn the audio book format diminishes the quality of the mp3?

    For some reason any two albums I've bought off iTunes and uploaded to iTunes without problem onto my iPhone. I turned them in audio book format. The quality of the file is important. I think they are in 320 Kbps. This quality will decrease once in an audio book format?

    N ° you are simply changing the file extension.

    If you're worried, try it first on a copy.

  • a cross on the table cell

    Is it possible a cross on the table cell?

    The term "strike" can have multiple interpretations.

    1. As a checkbox clickable?
    2. With diagonal lines, which intersect?
    3. With vertical lines or horizontal hash?
    4. With table cell fill of a model image pre-built?
    5. With gray scale or the fill color, without content, to suggest the use of cell?

    Pages, you didn't say what version, so I'll use v5.6.2, does not provide the points 1, 2 and 3 for the cells in a table.

  • I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

    I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
    When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
    can someone help me?

    Hi splingun,

    We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

    Hope this helps!

  • There was formerly a cross at the top left to cancel the download from a site that seems to be wrong or corrupt. Where is - what happened?

    Just upgrade to version 9.0.1. The old version had a cross near the upper-left search box and if a download seems to take too long, or a large PDF download froze at halfway through, you can click on the cross to cancel the download. I do not now see the equivalent, and the only leak must close Firefox.

    In some cases, a new tab will appear (with a cross to the right of the tab name) when the site starts to load and you can click to close, but another time which does not occur.

    Did I miss something? Thank you

    Firefox 4 and later versions use a combined Stop/Reload/Go button that is placed at the right end of the address bar.

    During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.

    If you type in the address bar this button would then become a button go.

    Click the Reload button to duplicate the current tab in a new tab.

    See also:

  • Presario 2195US original audio driver freeze all the computer in Win7

    Hello friends!

    I'm new to the forum, and I am here because everything could not solve my problem.

    My Compaq Presario 2195US has an upgrade of RAM 1 GB in total and I installed Win7 on it. In the adaptation of the drivers, everything goes very well with compatibility adjustments and new downloads of drivers for my hardware, but there is no video and audio drivers for win7 - now I'll explain the audio problem:

    I installed the audio driver in XP compatibility mode and the driver installed fine (without adjustment of the installation program compatibility is not identify the sound card) and the manual installation of the driver by pointing devices Manager worked too. When everything seems fine, when some audio is played, during playback of audio, sooner or later the computer freezes absolutely and repeat the short sound of the moment of freezing indefinitely. The sound becomes something like tun-tun-tun-tun-tun-tun-tun-tun-tun with the screen freezes and only a reboot is possible - the mouse does not move and ctrl-alt-del is the same anything.

    I use the computer with his disabled card, but I need to get to work. The problem seems to be something small, but I have no knowledge to edit my audio driver to resolve the issue. In some of these blocks, I saw that when I'm on the windows media player window and clicked on a folder in a window behind it, the computer freezes, but it was just an observation. Gels are independent of the application that I use. The use of the sound card on sort may freeze the computer. I need help hard here and we hope that someone trying to solve. Thank you in advance.

    Hi - Caio-,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your Compaq Presario 2195US Notebook and having Audio problems with Windows 7 drivers. I would go to the Device Manager and do a right click on the audio adapter (if more 1 present I delete them all and restart the computer) in your devices and update the driver manager. Restart the computer and see this help. Here is a downloadthat I found for the audio driver, it is a third party site.

    Hope it will be useful.

    Thank you.

  • Qosmio G50-12 q: no audio signal while moving the video files from the camcorder

    Hello

    I have a portable PC Toshiba Qosmio G50 - 12 q with 640 GB HARD drive, and equipped with 4 GB of Ram saw the Completed window system upgraded to the version of service pack 2

    I connected the video camera Sony PC 115 to the PC via the I.Link IEEE 1394 cable while that I import a video to Window Movie Maker in order to save it.

    At the moment where it is reproduced in the form of Movie Maker, I see the video reproduced the video camera but don't feel no audio. Then when I'm done for import video I want and he always see in Movie Maker, the program reproduces regularly or video he recorded or the audio exactly I didn't think it was important while it.

    It ' is usually?

    Working group than in the phase of import that I would have to see and feel or the audio video. Task not is defective cable because when I see the video recording in Movie Maker I feel also the audio base, means that the audio has left the video camera, is entered into the PC via the I.Link recorded it.

    To the point, I can hear the audio in the phase of transfer / import video or any other audio device from the camera / video, I have to in case of change inside of Window Movie Maker or the window given some details of formulation considers also the I.Link Jack specifically?

    Or the cable is connected between the video camera and PC with purpose there details? Even if it seems to me have connected well it boom ' as I have said, l "audio is saved."

    Thanks and greetings

    I have Sony camcorder DCR-TRV520E and in the past, I recorded several movies on my laptop.
    I used the Ulead Movie studio application and everything was OK.

    10 minutes ago that I tested it with Windows Movie Maker (Vista) too. Here a few facts:
    -My cam Sony is recognized correctly
    -Started Windows Movie Maker and chose the option IMPORT > digital video camera
    -Traveled in the right folder
    -On the next stage of the single application started rewinding videotape
    -Importing video has begun only and when finished I checked it and the sound was there.

    Later I chose the option "publish on" > this computer and after 20 minutes it was all over.

    I just use the firewire cable. Nothing special.
    I really don't understand what's wrong there.

    East - the first time do you it?

  • No sound on my Satellite L650-1FU - Red Cross on the speaker

    Hello

    I opened a video and from one moment to the other, I had no sound. There is a red x on the speaker and I did this steps: [https://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=71195], but nothing helped.

    Thank you any help.

    Kind regards.

    OK you have done all these steps, but after installing the audio driver, what is the status of the sound card in Device Manager?

  • Audio call routed to the speaker when it is docked

    Hello

    When I anchor my Razr HD (JB 4.1.2) to my real car Motorola dock, my music will be automatically forwarded to speakers of the car, which is what I want, but for incoming calls and outgoing audio passes the external speaker to phones by default. I can touch the speaker button that forwards then the audio to the speakers of the car, but how can I do audio call road to the default car speakers and not the external speaker phones?

    If it is not a setting I can change then maybe an app that will do it for me?

    It seems a little strange that he must use the phones pregnant as I thought that the idea of a dock is to have fewer entry during the conduct of the user, I'm sure that ICS was not like that.

    Thank you

    Hi xrcist,

    Another phone never worked with your car? Were you able to route calls to your front car speakers?

    See you soon,.

    Nicole

Maybe you are looking for

  • Need drivers for my Satellite A10-PSA10E

    HelloI have a Toshiba laptop,Model: Satellite A10-PSA10E 012SY-CZand I can not find the drivers for my model... :(Anyone have a link where to download the driver? Thank you very :)) and... Sorry my English - is wrong :)

  • Safari jams and beachball in the Amazon product.

    El Capitan 10.11.13 Safari 9.2 When I connect to Amazon I get the spinning beachball and an error message in the activity monitor that says "Safari Web content no longer", using 99.2%CPU.  I have only 2 tabs open.  It began last week after I have upd

  • After download el capitan noise strange e

    There is no noise like that before when I installed el capitan, there is a power plug box noise like a fan is now working correct a little noise but is not good please explain to me what can be?

  • Restart your computer to finish installing important updates keep appearing. Windows Update (Windows 7)

    Previously I installed updates for windows 7, after installing the updates, I restart my computer but it still seems the message to restart your computer to finish installing important updates. Help solve this problem... Original title: Windows Updat

  • (Redirected) "No boot found" Laptop Inspiron 15 547

    My son broke his laptop by dropping the word iton. The palmrest at the hinge part was broken and the cables that connect in the LCD of the WLAN card has been broken. I replaced the palmrest watching a youtube tutorial and also bought a new WLAN card.