1 click to perform a symbol, 1 click to reverse the trend

1 click to perform a symbol with 1 click to reverse the trend and one to rule them all...

I have a (symbol) button on my stage three times (navigation buttons), each doing the same action but having another action to go to a different symbol for each.  They are "on - off buttons of the cursor.

The first click "slide the button to the right with a 'click' action. No problem.

How can I do that if a user clicks a second time, he 'inverse' of symbol game to move the slider to "off" position and then performs an action (calling another symbol)?

Also, I haven't added the 'second' action for the buttons (call another symbol).  Is there something I need to do in the click action to make sure it's a pause.5 seconds to run the animation of the sliding button before calling the nexy symbol?

Thanks for your help!

James

Hi, James.

You can save the State using a variable and whenever you click on check the status of the variable.  This article I wrote last year, explains how the simple state management (just search for the two words "State management" in this post):

https://blogs.Adobe.com/edge/2012/07/18/tutorial-leveraging-independent-symbol-timelines/

Hope that helps!

-Elaine

Tags: Edge Animate

Similar Questions

  • Click on movieclip = once play. Click the second time and reversing the trend. (how?)

    Hello friends, I am new here!

    How you all the doin '?

    I'll try to explain my problem as good as possible;

    Im making a flashpresentation for a school project. And in this presentation, I want a gallery.

    To book the Gallery I made a movieclip, which livens up a small square, a large square.

    My wish is;

    1. when I click on the movieclip the first time, he develops (playback forward)

    2. when the movieclip is expanded, click New and it contracts (read opposite)

    I did the first assignment, here is the code;

    Stop();

    _root.mc_bilder. Stop();

    onMouseDown = function() {}

    _root.mc_bilder.play ();

    }

    I did this easly nice work with the buttons, but this isn't how I want.

    So please guys, how do this work?

    All the best

    Oskar

    {yourmovieclip.onRelease = function ()}

    {if (this.) Back)}

    {this.onEnterFrame = function ()}

    this.prevFrame ();

    {if(this._currentframe==1)}

    delete this.onEnterFrame;

    }

    }

    } else {}

    This.Play ();

    delete this.onEnterFrame;

    }

    This.Back =! This.Back;

    }

  • can perform us two actions with a single button in two clicks, one after the other?

    Mr President.

    can perform us two actions with a single button in two clicks, one after the other?

    I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.

    Concerning

    Tanvir

    In the code, it should be easy.

    The following code adds that a button called butman with text 'ADD '.
    It then registers a listener that will be called if the user clicks the button.

    This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
    That's why he will swap the functionality of the button between ADD and CLEAR on each click.

    final Button butman = new Button("ADD");
    butman.setOnAction(new EventHandler() {
              @Override
              public void handle(ActionEvent t) {
                        if (butman.getText().equals("ADD")) {
                                  butman.setText("CLEAR");
                                  runAddData();
                        } else {
                                  butman.setText("ADD");
                                  runClearData();
                        } // END IF-THEN
              }});
    

    I hope that's what you wanted.

    Further reflection.
    You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

    I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

  • When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    Question
    When installing FF7, I clicked Yes to the "do you want to send info back to the developers on the use of memory etc." and now I want to no longer send information as his gel my browser then how do I disable that?

    See:

    • Firefox > Preferences > advanced > general: system default: 'send performance data '.
  • I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

    I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

    Hi A1W1LL,

    A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

    To perform the clean boot procedure, follow the instructions in the link below.

    Step 1: Perform a clean boot
    Step 2: Enable half the services
    Step 3: Determine whether the problem returns
    Step 4: Enable half of the startup items
    Step 5: Determine whether the problem returns
    Step 6: Resolve the problem
    Step 7: Reset the computer to start as usual

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135

    After reviewing the issue, put the computer into Normal mode.
    Uninstall or update the program that is causing the problem.

    If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

    1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
    2. Press any key when the message "Press any key to boot from CD or DVD".
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. click on repair your computer.
    5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
    6. in the System Recovery Options dialog box, click System Restore.
    7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
    8. click Finish to restore the system.

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I get no answer to by clicking "Edit" in the dialog box indexing options. ;

    original title: indexation of dialog options change

    I recently followed instructions from this forum on the removal of invalid index locations; I have rebuilt the index. Unfortunately, an external drive that had been indexed throughout without asking me, is not be indexed now.  When I followed the instructions from Microsoft on the addition of the search location, I get no answer to by clicking "Edit" in the dialog box indexing options. ; nothing happens.

    Help!

    Hello

    Method 1: Let flow the fixit available in the link below and then check

    Fix Windows Search when it crashes or shows no results

    http://support.Microsoft.com/mats/windows_search/en-us

     

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

     

    Method 3:  Select the boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.

    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • By clicking through to the next layer

    I designed a website all the flash and encoded in AS2 and when someone clicks to play a movie in my ads section, I melted in a solid black background (which is a graphic symbol -) and plays the video (FLV).  I noticed that when the video plays if you click on the black background click thanks to the layer below and sometimes United, you can click on another button/video.  I do not understand this because the solid black background that covers the entire screen should not prevent this clicks?  Y at - it sort of a code or something I need to tell the black background United do not click through.

    Here is the Web site, click on one of the nine videos and click in the black area around the video to see the problem, thanks in advance:

    http://www.GiantSteps.us/test.html#commercials

    If you have active pimples behind an inactive element, the buttons can always interact with.  You must either disable the buttons while they are covered or assign a code interactive to the back so that it blocks access to the buttons.  To do the latter, you need to make the background a movieclip to a minimum so that you can assign the code to him.

  • When I go to tools-> account settings, Thunderbird freezes and simply emits a sound without action, when I click anywhere in the application.

    I can't access my account settings. When I try to access account settings by navigation in tools-> account settings, TB freezes and simply emits a sound from there to the front when I click anywhere in the application. I have to close TB via the Task Manager and reopen it. Enjoyed every appeal. Thank you

    What happens in safe mode? Hold down the SHIFT key while you start Thunderbird.

  • button refresh Foxfire did not work when clicked on for the past two weeks

    button refresh Foxfire did not work when clicked on for the past two weeks

    Hi, see controls customize Firefox, buttons and toolbarsand click on restore default settings.

    If this does not help, Try Firefox Safe Mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

    If Firefox is open, you can restart Firefox Safe mode in the Help menu:

    • Click the menu button

      click Help

      then select restart with disabled modules.

    If Firefox does not work, you can start Firefox in Mode safe as follows:

    • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac: Hold the option key during the startup of Firefox.
    • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
      (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

    When the Firefox Safe Mode window appears, select "start mode safe."

    If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. This might help others with the same problem.

  • I'm new on El Capitan.  Window, emerged that says 994 issues found with a button to click to start the repair.  What is a legit Apple window?

    I'm new on El Capitan.  An arisen window that says 994 found subjects (files duplicated, System & unwanted internet, recoverable unauthorized software & disk space) with a button to click to start the repair.  What is a legit Apple window?

    Not enough information. Please be more complete. It would also help if you can provide a screenshot of this:

    To post a screenshot

    1. Press command + shift + 4, that will change the cursor to the line of sight.
    2. Hold down the mouse button and the collimator allows you to select the part of the screen you want to capture.
    3. Release the mouse button and the image will be saved on your desktop.
    4. Click on the camera icon in the toolbar of the message forum Editor.
    5. Drag the image on the button select a file and click the Insert button.
  • What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

    What on Earth is the lego man ' click me ' on the home page, and why he doesn't something when I click on?

    Click Me logo is part of the promotion of the Humble Mozilla Bundle - clicked once you should be able to control the character with the "WASD" and "IJKL" key.

    Citing the-edmeister https://support.mozilla.org/en-US/questions/1025706

    Who click Me the game is part of the promotion of the Humble Bundle of Mozilla on the default Home Page [topic: Home], which loads from the Mozilla servers in the "Brand Logo" section (DIV) of about: House. A feature that has been used in Firefox 29 [IDE] just before the start of the Olympic Games.

    Also, part of this promotion is addressed in the "excerpt" under the container of the research on the topic: homepage.

    If you want to prevent the section "Brand Logo" (and the "snippet" under the reservoir of research) never to be seen again, you can install this UserStyle and elegant. https://userstyles.org/styles/104673/about-home-hide-snippets-and-hide-brand-logo

  • I want to click to open the message, but it is to open when I select it, and I can't get rid of the open under the messages pane.

    I want to click to open the message, but it is to open when I select it, and I can't get rid of the open under the messages pane.

    The preview area is called the messages pane. You can activate the message on and outside pane using either:

    • F8 key
    • Press the Alt key to display the classic menu bar > View menu > page layout > the message pane

    I don't know why I can't find it in the new menu (3 bars). There has got to be somewhere.

  • Used to do a right click to place the icon on the desktop, how to do that now?

    When you use Internet Explorer, I click with the right button on a web page and then make a left click on ' create the icon on the desktop? Is not doing that. How can I do with Mozilla?

    Hello

    If you try to create a desktop icon for a Web site that you visit using Firefox on your desktop, you can follow the instructions mentioned in this article SUMO create a shortcut on the desktop to a Web site.

    Please let us know if this helps in your query.

    Thank you

  • Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

    I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

    Tried to check and repair disk permissions. This finished.

    Then tried to empty the trash again and got the same error 50 yet.

    I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

    I can't go in safe mode or in disk utility.

    Any suggestions on what to try?

    Thank you

    What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

  • FireFox won't let me not do right click to change the bookmark names

    I recently bought a new computer and downloaded FireFox. When you add my favorite sites to my bookmark, the names are added automatically. They are too long, and I want to change them, but FF is not letting me do a right click to change the name.

    When I right click, it just goes to the bookmark as if I used a left click. Right-click on the computer itself works, but is not trying to change anything in a toolbar.

    Any suggestions?

    Unchecking "use hardware acceleration" was the solution for me. I can not right click on these bookmarks now.

    Thank you!

Maybe you are looking for