1 single device unable to access Internet from my WRT54g replaced e1000
I'm having a problem with 1 laptop as I installed my Cisco e1000. Here's my setup.
Cable modem-> BEFSR81 vs3-> E1000.
The BEFSR81 serves all my LAN wired connections and using DHCP. The E1000 is connected to a LAN to LAN connection (such as Internet to connect to the LAN does not work for all devices).
The E1000 has disabled DHCP (I turned it off to try to solve this problem).
All wireless devices get a good lease DHCP the BEFSR81. I am actually posting this from my laptop to work using a wireless connection between the e1000.
Work machine connection information:
Ethernet card 2 wireless network connection:
The connection-specific DNS suffix. : nc.rr.com
... Description: Intel Centrino Advanced-N 6200
AGN
Physical address.... : 00-23-14-D0-F1-28
DHCP active...: Yes
Autoconfiguration enabled...: Yes
IP address...: 192.168.1.104
... Subnet mask: 255.255.255.0.
... Default gateway. : 192.168.1.1.
DHCP server...: 192.168.1.1.
DNS servers...: 209.18.47.61
209.18.47.62
Lease obtained...: Friday, March 4, 2011 08:41:32
End of the lease...: Saturday, March 5, 2011 08:41:32
Non-working machine gets the same information, sauf.107 as the final byte in the IP. However, it may not:
(1) ping to gateway (router wired), partially once outside, partially inaccessible Destination address.
(2) ping any IP on wireless local area network - get the unavailable destination host.
I deleted and then recreated the network connection several times - the Setup is exactly the same Windows is concerned on both devices.
Until I get really pissed on a smash, the new router with non-working laptop wireless, anyone have any suggestions? Thanks in advance for reading/tent to help.
Have solved it after talking with support from Cisco. Apparently, the driver supplied with Windows Vista Atheros 5007 wireless card had problem with WPA2 encryption. I updated the driver from the site Web of the manufacturer of the PC and boom, I'm back online. My previous router was WPA, so I didn't know it was a problem.
Tags: Linksys Routers
Similar Questions
-
Unable to access internet from the Windows client on the Linux host
Host: Arch Linux, x 86-64, kernel 4.1.6
I installed VMWare Workstation 12 on my Linux host and the installation seems to complete without any errors. However, during the compilation of the modules of the core, a few warnings (which I think are safe to ingnore appeared).
sudo modconfig vmware - console - install-all
[sudo] password for ffhaddad:
Stopping VMware services:
Demon of authentication makes VMware
VM communication interface socket family is
Virtual machine communication interface is
Virtual machine monitor makes
File system is blocking
do: enter the directory "/ tmp/modconfig-cR61EP/vmmon-only '.
Using the kernel build system.
/ sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'
CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driverLog.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/driver.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/linux/hostif.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/memtrack.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/apic.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/vmx86.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/task.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/cpuid.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/hashFunc.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/comport.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/common/phystrack.o
CC [M] /tmp/modconfig-cR61EP/vmmon-only/vmcore/moduleloop.o
/tmp/modconfig-cR61EP/vmmon-only/Linux/driver.c:1285:1: warning: always_inline function might not be inlinable [-Wattributes]
LinuxDriverSyncReadTSCs(uint64 *delta) / / OUT: max - min TSC TSC
^
LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.o
Construction modules, step 2.
MODPOST modules 1
CC /tmp/modconfig-cR61EP/vmmon-only/vmmon.mod.o
LD [M] /tmp/modconfig-cR61EP/vmmon-only/vmmon.ko
make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'
/ sbin/make - ch. $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = postgeneration
make [1]: entering directory ' / tmp/modconfig-cR61EP/vmmon-only '.
make [1]: 'postgeneration' is up-to-date.
make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.
CP f vmmon.ko. /... vmmon.o
make: leaving directory ' / tmp/modconfig-cR61EP/vmmon-only '.
make: entering directory ' / tmp/modconfig-cR61EP/vmnet-only»
Using the kernel build system.
/ sbin/make - C lib/modules/4.1.6-1-ARCH/build/include/... SUBDIRS = $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = modules
make [1]: Entering directory ' / usr/lib/modules/4.1.6-1-ARCH/build'
CC [M] /tmp/modconfig-cR61EP/vmnet-only/driver.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/hub.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/userif.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/netif.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/bridge.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac_compat.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/procfs.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/smac.o
CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetEvent.o
In file included from include/linux/pci.h:35:0,
of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.
from /tmp/modconfig-cR61EP/vmnet-only/netif.c:43:
include/Linux/pci_ids.h:2251:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,
of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.
from /tmp/modconfig-cR61EP/vmnet-only/netif.c:42:
/tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: Note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
CC [M] /tmp/modconfig-cR61EP/vmnet-only/vnetUserListener.o
In file included from tmp/modconfig-cR61EP/vmnet-only/net.h:38:0,
of tmp/modconfig-cR61EP/vmnet-only/vnetInt.h:26.
from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:52:
/tmp/modconfig-cR61EP/vmnet-only/vm_device_version.h:56:0: warning: 'PCI_VENDOR_ID_VMWARE' redefined
#define PCI_VENDOR_ID_VMWARE 0x15AD
^
In file included from include/linux/pci.h:35:0,
of tmp/modconfig-cR61EP/vmnet-only/compat_netdevice.h:27.
from /tmp/modconfig-cR61EP/vmnet-only/bridge.c:51:
include/Linux/pci_ids.h:2251:0: Note: this is the location of the previous definition
#define PCI_VENDOR_ID_VMWARE 0x15ad
^
LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.o
Construction modules, step 2.
MODPOST modules 1
CC /tmp/modconfig-cR61EP/vmnet-only/vmnet.mod.o
LD [M] /tmp/modconfig-cR61EP/vmnet-only/vmnet.ko
make [1]: leaving directory ' / usr/lib/modules/4.1.6-1-ARCH/build'
/ sbin/make - ch. $PWD SRCROOT = $PWD. \
MODULEBUILDDIR = postgeneration
make [1]: entering directory ' / tmp/modconfig-cR61EP/vmnet-only.
make [1]: 'postgeneration' is up-to-date.
make [1]: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.
CP f vmnet.ko. /... vmnet.o
make: leaving directory ' / tmp/modconfig-cR61EP/vmnet-only.
Starting VMware services:
Virtual machine monitor makes
Virtual machine communication interface is
VM communication interface socket family is
File system is blocking
Virtual Ethernet is
Demon of authentication makes VMware
Available shared memory is
When I type lsmod | grep vm, I see the module running:
57344 13 vmnet
When I type: status vmware.service, I get:
VMware.service - demon of VMware
Load: loaded (/ usr/lib/systemd/system/vmware.service; activated; seller preset: disabled)
Active: active (left) from the sea 2015-08-26 14:45:22 PDT; 1 h 14 min ago
Process: departure from ExecStart=/etc/init.d/vmware 323 (= released, the status code = 0/SUCCESS)
Main PID: 323 (code = released, State = 0/SUCCESS)
CGroup: /system.slice/vmware.service
August 26 at 14:46:21 silverstone vmnet-dhcpd [718]: 00 DHCPDISCOVER: 0C: 29:05:cc:e2 via vmnet8
August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPOFFER on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8
August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPREQUEST for 00 172.16.156.128: 0C: 29:05:cc:e2.... se8
August 26 at 14:46:22 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8
August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPINFORM for 00 172.16.156.128: 0C: 29:05:cc:e2 v..et8
August 26 at 14:46:27 silverstone vmnet-dhcpd [718]: DHCPACK on 172.16.156.128 at 00: 0C: 29:05:cc:e2 via vmnet8
August 26 at 14:52:31 silverstone vmnetBridge [589]: stop bridge eno1 to virtual network 0.
August 26 14:52:34 silverstone vmnet-dhcpd [695]: select: interrupted system call
August 26 14:52:34 silverstone vmnet-dhcpd [695]: get out.
August 26 14:52:34 silverstone vmnet-dhcpd [718]: select: interrupted system call
Note: Some lines were ellipsized, use-l to show in its entirety.
All this leads to the issue of not being able to access the internet from within my Windows guest. I can ping the host computer, but I can't access the internet. I'm not sure of what could be the problem.
I pulled up to the parameters of the virtual machine window (Ctrl + D), selected network adapter in the list of devices and changed the ball from NAT to bridged. After you save the settings, I booted the machine virtual Windows has detected a new network adapter, and after you configure it, I am able to access the internet.
-
Unable to access internet from my computer after I installed virtual box on the same host
Hello
I have vmware workstation 6.5 works very well. I recently installed oracle VM.
After you have installed virtual box on wmware my internet has stopped working. network adapter showing the error.
can someone give me the solution.
see you soon
Select the LAN wireless - n DW1501... VMnet0 adapter in the virtual network Editor.
-
Unable to access Internet Explorer under two of the five profiles on the same computer
I have 5 profiles set up on my computer, one for each Member of the family. When I try to access Internet Explorer or Word in two of the profiles I am unable to run the command. Both applications work as they always have under the other three profiles. I double click on
and 'Open with' dialog box appears with "Recommended programs." The only option in this area is "Internet Explorer". I select the option and click on , but I find myself in a continuous loop with the "Open with" dialog box When I finally click I get an another dialog asking me to save or run "ssvagent.exe." I am able to cancel out, but I can't even open either application. If I select I can open the document in word, but I can't access Word from the options menu or the shortcut I used last year. I ran a virus scan today and 5 cases have been detected and removed. I ran the scan under 5 profiles, but now I can't access BitDefender (my virus scan) under either of the two affected profiles. Please notify. Henry Hello
Try scanning from the utilities included in the link, how to get rid of malware and let us know what happens.
How to get rid of malware.
Concerning
Anthony. -
Unable to access Internet Explorer 9 using Windows Vista, Service Pack 2
I use Vista, Internet 9, desktop pc, cannot connect to Internet Explorer, get the message "Internet Explorer cannot display the webpage." I click on diagnose connection problems and he says: "Windows cannot find any problems with the network connection on this computer." Using Netgear and router. All the lights are on, all connections are secure. Two of them have reset several times that I care to mention. I access internet using my wireless laptop or directly related. Lower right of the screen on the task bar, it shows double computer and Internet Explorer icons. When I click it, it brings up the network and sharing, and it shows the lines between desktop computer, network 2 (home network) and the Internet. But I can not connect to internet at all of this office. I could, until what I deleted temporary files, run MS Security Essentials, then defraged. Help, please! I am in desperate need! :-(
Thank you
Hello
Method 1:
Use the Internet Explorer (No Add-ons) mode, and check if it helps:Method 2:
I also suggest you to consult the Knowledge Base article and check if it helps:
http://support.Microsoft.com/kb/956196Method 3:
Check if you are able to ping Web sites. You can try the following steps:
a. click on the Windows "Start" button, then select the 'Run' utility in the start menu.b. Enter the following command in the field 'Open', then click 'OK ':
cmdCommand prompt opens in a separate window.
c. Type "ping" followed by the URL of the Web site, you are trying to ping. You must leave a space between the 'ping' and the URL.
For example, ping Yahoo.com, enter the following command:
Ping www.yahoo.com
d. apply the command by pressing the key "Enter" on the keyboard. You should see the information on statistics for the address ping IP is entered, including the number of packets sent, received or lost.
If there is no packet lost, your Internet connection is working normally. However, if there are packages that are lost, you may have a problem with your Internet connection.
-
BlackBerry Smartphones unable to access Internet in WiFi hotspots such as Starbucks
Ok. I've scoured the forums here and almost everywhere possible on the net with over some luck to find an answer for almost a month. I am currently on the cards by Fido. I bought a BB curve about a month ago because I was told that it has built in WiFi.
I have no problem connecting to my wireless home network. Weather, that I secure it or not secure. I have no problem connecting to any open or secured wireless network. When I have a problem is when I go to places like Starbucks where there a login screen. So, I'm unable to connect at all.
Search for networks, it finds the network. I select the network. Then, he said that it is connected. So I'll try to go on the internet and it gives me just a blank white screen. Now I find that my BlackBerry is just a useless paperweight because mainly I got to use in Starbucks coffee shops, since that is where I am much of the time.
I tried to go to bell.ca and see if I could access it like this (as I read somewhere to try this), still no luck. My question is, why would I be said that it has built in wifi, if it only works on some networks? It is able to be used on networks that have a login screen or is not able to? And there at - it something I am doing wrong? It shows the name of bell's access point when it says connected. And I made sure that I put it in wireless mode. I had other devices (Palm Pilot) who had no problems to connect. What is the built in wifi point if it does not work on all wifi networks?
Ultimately what I want to know, is how to get my BlackBerry to bring up the pages of connection of these "hot spots"? Weather in Starbucks, libraries, other cafés etc. ?
I can't guarantee that it will work, but it is worth trying. After you open your browser to connect to a wifi hotspot, press the BB Menu key and select Options and choose the Configuration of the browser. Then, with the browser setting, try to set it to "Hotspot browser."
Who help me? Otherwise, let me know and I'll see if I can get my Storm2 to connect to Starbucks or other hotspot later today.
-
Hello
I have recently installed Windows 2000 on my laptop. HP wireless Assistant is showing as 'Wifi enabled' but when I try to access the internet, it does not work. The icon network that enabled watch with a mark of Red Cross.
Uninstalled and reinstalled latest drivers from Web site map. Look for the option "SSID" in properties fo the card but unable to see this option.
Help, please...
Thank you
Avinash B
Hello:
See if this package of driver/software for W2K works...
-
Ping works but the browser unable to access internet etc.
XP on an EeePC the Internet book.I can't ping network addresses, but I am unable to use IE or Firefox to access pages on the internet. I use Avast Antivirus; It will be impossible to update. I suspect that windows update no longer works, but I have not tried.I ran msert.exe and windows-kb890830 - v4.0.exe in safe mode, no virus no indicated, but when I run them in normal mode both suspend the computer while checking wmplayer.exe.
Any suggestions?Hello
If I undestand you well, you can run this command ping: ping www.yahoo.com, no problem, but when you're using any browser, you cannot access the web page www.yahoo.com, can you?
First you can try - full reset TCP and Winsock by this command line command - click on Start - run and write CMD , click OK. Then write this command:
netsh winsock reset
netsh int ip reset log.txt
LC
-
Unidentified network
I have a network not identified on my computer is blocking internet access. How can I remove it?
Hi Bonita Bornstein,
1. did you of recent changes on the computer?
2. what happens when you try to connect to the internet?
3. do you have security software installed on the computer?
Method 1
I suggest you temporary disable the security software on the computer and check if it helps.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2
If the previous step fails then I suggest that you check the State of the network adapter on the computer using cheque and the Device Manager if it helps.
How to manage devices in Windows XP
-
OTP-S3200 unable to access internet
You just bought a S3200 (finally join in on the crowd BluRay). Player works fine. I have an extension cable network which is connected to my big TV and it works fine. Wireless works very well with my laptop. The S3200 says that the network is ok (wired or wireless) but does not have access to the internet. Bought this for Netflix on an old internet TV is a must.
Please do not update the firmware - I don't have access to the internet :/
All that I'm missing?
Hello ljohnsaw, welcome to the community! Thank you for your message.
If the Internet connection setting appears as being down, but the setting of the router's wireless network is OK, follow a few steps to troubleshoot your device:
-
Problems with NAT? Can't access internet from inside the network?
I was intrigued with this problem for a few days now. I'm stuck on what could be the issue. The problem is that I can ping my router, G0/0 and G0/1, to the internet. However, since the switch and my PC, I can not ping Internet. I'm sure that everything is configured correctly, but here is my setup for the switch and the router:
Router 1:
version 15.1
no service button
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 *.
!
No aaa new-model
!
no location network-clock-participate 3
!
dot11 syslog
no ip source route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC105013BA
username * secret privilege 15 5 *.
!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.1 IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
the IP 192.168.0.1 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 115
GLBP 100 preempt
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.1
network 192.168.0.1 0.0.0.0 area 1
192.168.254.1 network 0.0.0.0 area 0
!
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
Synchronous recording
local connection
line to 0
line vty 0
local connection
entry ssh transport
output transport ssh
line vty 1 4
opening of session
transport of entry all
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Router 2:
version 15.1
horodateurs service debug datetime msec
Log service timestamps datetime msec
encryption password service
!
hostname LAN_Router_2
!
boot-start-marker
boot-end-marker
!
!
! card order type necessary for slot 1
Monitor logging warnings
enable secret 5 *.
!
No aaa new-model
!
clock timezone CST - 5 0
!
dot11 syslog
IP source-route
!
IP cef
!
!
!
!
domain IP MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
No ipv6 cef
!
Authenticated MultiLink bundle-name Panel
!
!
!
!
type of parameter-card inspect global
Select a dropped packet newspapers
!
voice-card 0
!
!
!
!
!
!
!
Crypto pki token removal timeout default 0
!
!
!
!
license udi pid CISCO3845-MB sn FOC1411592J
username * secret 5 *.!
redundancy
!
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
!
!
!
!
!
!
interface Loopback0
192.168.254.2 the IP 255.255.255.255
!
interface GigabitEthernet0/0
DHCP IP address
penetration of the IP stream
stream IP output
NAT outside IP
IP virtual-reassembly in
automatic duplex
automatic speed
media type rj45
!
interface GigabitEthernet0/1
IP 192.168.0.2 255.255.255.248
penetration of the IP stream
stream IP output
IP nat inside
IP virtual-reassembly in
GLBP 100 ip 192.168.0.4
priority GLBP 100 110
automatic duplex
automatic speed
media type rj45
!
ospf Router 5
router ID - 192.168.254.2
network 192.168.0.2 0.0.0.0 area 1
0.0.0.0 network 192.168.254.2 area 0
!
Default IP gateway 192.168.0.1
IP forward-Protocol ND
no ip address of the http server
no ip http secure server
!
!
IP nat inside source list 10 interface GigabitEthernet0/0 overload
IP route 0.0.0.0 0.0.0.0 dhcp
!
SSH extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
denyip a session
!
access-list 10 permit 192.168.94.32 0.0.0.15 connect
access-list 10 permit 192.168.17.0 connect 0.0.0.7
access-list 10 permit 192.168.52.0 connect 0.0.0.7
access-list 10 permit 192.168.0.0 0.0.0.7 connect
access-list 10 deny any newspaper
!
!
!
!
!
!
control plan
!
!
!
!
profile MGCP default
!
!
!
!
!
connection of the banner ^ C
W A R N I N GTHIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 360
exec-timeout 360 0
7 password *.
Synchronous recording
local connection
line to 0
opening of session
line vty 0 4
SSH access class in
Synchronous recording
local connection
entry ssh transport
output transport ssh
!
Scheduler allocate 20000 1000
NTP 198.60.73.8 Server
NTP 13.85.70.43 Server
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Switch:
version 12.2
no service button
tcp KeepAlive-component snap-in service
a tcp-KeepAlive-quick service
horodateurs service debug uptime
Log service timestamps uptime
encryption password service
!
hostname LAN_Switch
!
boot-start-marker
boot-end-marker
!
!
username * secret privilege 15 5 *.
!
!
!
No aaa new-model
clock timezone CST - 6
1 supply ws-c3750-24ts switch
mtu 1500 routing system
IP routing
IP - domain name MyTestLab.com
8.8.8.8 IP name-server
IP-server names 8.8.4.4
!
!
!
!
!
!
!
!
!
spanning tree mode rapid pvst
spanning tree logging
spanning tree extend id-system
!
internal allocation policy of VLAN ascendant
!
property intellectual ssh time 60
property intellectual ssh authentication-2 retries
property intellectual ssh event logging
property intellectual ssh version 2
!
!
interface Loopback0
192.168.254.5 the IP 255.255.255.255
!
interface FastEthernet1/0/1
switchport access vlan 17
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/2
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/3
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/4
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/5
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/6
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/7
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/8
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/9
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/10
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/11
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/12
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/13
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/14
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/15
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/16
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/17
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/18
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/19
Description # PC #.
switchport access vlan 10
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/20
Description # X_BOX #.
switchport access vlan 666
switchport mode access
Shutdown
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/21
switchport access vlan 94
switchport mode access
spanning tree portfast
spanning tree enable bpduguard
!
interface FastEthernet1/0/22
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/23
switchport access vlan 5
switchport mode access
!
interface FastEthernet1/0/24
switchport access vlan 5
switchport mode access
!
GigabitEthernet1/0/1 interface
switchport access vlan 666
Shutdown
!
interface GigabitEthernet1/0/2
switchport access vlan 666
Shutdown
!
interface Vlan1
no ip address
Shutdown
!
interface Vlan5
IP 192.168.0.5 255.255.255.248
!
interface Vlan10
address 192.168.10.2 255.255.255.0
!
interface Vlan17
IP 192.168.17.17 255.255.255.248
!
interface Vlan52
IP 192.168.52.1 255.255.255.248
!
interface Vlan94
IP 192.168.94.33 255.255.255.240
!
ospf Router 5
router ID - 192.168.254.5
Log-adjacency-changes
network 192.168.0.5 0.0.0.0 area 1
network 192.168.10.2 0.0.0.0 area 2
network 192.168.17.17 0.0.0.0 area 2
network 192.168.52.1 0.0.0.0 area 2
network 192.168.94.33 0.0.0.0 area 2
0.0.0.0 network 192.168.254.5 area 0
!
IP classless
IP route 0.0.0.0 0.0.0.0 192.168.0.4 permanent
no ip address of the http server
no ip http secure server
!
!
SSH_IN extended IP access list
permit tcp host 192.168.52.2 any eq 22 log
permit tcp 192.168.10.0 0.0.0.255 any eq 22 log
permit tcp host 192.168.17.18 any eq 22 log
any eq 22 host tcp 192.168.0.1 newspaper permit
permit tcp host 192.168.0.2 any eq 22 log
permit tcp host 192.168.0.3 any eq 22 log
permit tcp host 192.168.0.5 any eq 22 log
deny ip any any newspaper
!
!
connection of the banner ^ C
W A R N I N G
THIS IS A PRIVATE COMPUTER SYSTEM.
This computer system, including all related equipment, network devices
(specifically including Internet access), are provided only for
authorized used.
All computer systems may be monitored for all lawful, including purpose
to ensure that their use is authorized, for management of the system, to
facilitate protection against unauthorized access, and to verify security
survival and operational security procedures.
Monitoring includes active attacks by authorized personnel and their
entities to test or verify the security of the system. During the surveillance,.
information may be examined, recorded, copied and used for authorized
purposes.
All information, including personal information, placed on or sent over
This system may be monitored. Uses of this system, authorized or
unauthorized, constitutes consent to monitoring of this system.
Unauthorized use may subject you to criminal prosecution. Evidence of
any unauthorized use collected during monitoring may be used for
administrative, criminal or other adverse action. Use of this system
constitutes a consent to monitoring for these purposes.
^ C
!
Line con 0
session-timeout 60
exec-timeout 60 0
Synchronous recording
local connection
line vty 0
access-class SSH_IN in
local connection
line vty 1 4
access-class SSH_IN in
opening of session
line vty 5 15
access-class SSH_IN in
opening of session
!
NTP 198.60.73.8 Server
Event Manager environment suspend_ports_config flash: / susp_ports.dat
Event Manager environment suspend_ports_days 7
Event Manager user Directorystrategie "flash: / policies /.
Event manager session cli username "stw".
political event manager sl_suspend_ports.tcl
political event manager tm_suspend_ports.tcl
SaveRunConfig event manager applet
cron cron-event timer entry ' 0 0 * * ".
command action 1.0 cli 'enable '.
cli 2.0 action command "RAM".Well, I totally forgot the keyword "log" and NAT:
Cisco IOS NAT support ACLs with a keyword "log"?
A. When you configure Cisco IOS NAT translation dynamic NAT, an ACL is used to identify the packages that can be translated. The current NAT architecture does not support the ACL with a keyword "log".
http://www.Cisco.com/c/en/us/support/docs/IP/network-address-translation...
If your problem is not the mask with joker, but the command "log"...
-
Has worked with the provider of the ISP for 3 hours and determined with the computer problem. Has been able to access the internet using a desktop computer and excluded the modem as the culprit. Literally arrived the day after. Connection status shows connected with limited access, but IE says something quite different. We have tried to ping from modem to... command prompt has failed with code State 1231. Help.
Hello
It's a Broadcom adapter. My problem has been resolved. I uninstalled AVAST and everything has worked fine since then. There was a recent update (3 days) for AVAST. I have since past haved to another product.
-
Service Pack 3 problems
Recently downloaded service pack 3 and cannot get into Internet Explorer 8 as 'Data Protection' will not allow. Anyone know how to fix this?
Hi Courtney,
· Are you referring to Data Execution Prevention (DEP)?
If so, check if turn off DEP support. To do this, follow these steps.
a. click Start, click run, type sysdm.cpland then click OK.
b. on the tab Advanced , under performance, click settings.
c. on the Data Execution Prevention tab, use one of the following procedures:
· Select the check box next to the program that you want to turn off DEP for and then click OK.
· If the program is not in the list, click Add. Navigate to the folder Program Files , search for the executable file of the program (it will have the .exe extension) and then click Open.
For more information on DEP, see the following article.
-
It's the only message I get for Hotmail:
Hotmail
Hotmail is temporarily unavailable, but it should be available again in a few moments.
Have you tried 4 different computers to enter HOTMAIL... all with the same result.
Someone at - it suggestions?
Richard
Hi Richard1010,
As you use Windows Live Hotmail, I recommend you contact Hotmail for assistance support.
For more information, please visit: Windows Live Hotmail: main problems and Support information
Hope the helps of information.
-
Unable to access internet via a wireless connection
original title; Wireless cannot be used. Only the adapter! Help someone
someone help me please my wireless can't be used but only my adapter can be used my laptop is aspire 4741g
On many models, there is a hardware switch - check that it has not set to the OFF"" position.
Maybe you are looking for
-
Toll free customer support number
Toll free customer support number
-
HP 1350 printer peripheral will not stay in offline mode. Problems with the Wi - Fi driver
Hi I have a Dell desktop with printer HP 1500 computer. After printing several documents, the printer has gone offline. Troubleshooting indicates the problem with the Wi - Fi driver. The printer is connected to the computer makes a Wi - Fi connect
-
HP touchsmart tm2 laptop: DST short hard drive failed
Because my laptop was not start (only a blank screen to come), I ran the advanced diagnostic by pressing F2 while bootung. After you run the disk hard test the short DST failed with the ID PLVLWC-4G24HG-XD6VSG-60TP03 failure. The laptop is out of wa
-
When I right click on 'my images' it says "email with yahoo." He said then that yahoo is not my mail server and I want to change. I don't. I got my computer 'cleaned' to Office Depot. If they did not cause this problem or well microsoft. Can I s
-
Logo help and support on the office just stop working. How do you get it working again