#1 Slot memory read not

Similar Questions

• Update problem/Slot memory does not

  I have a HP Pavilion G7-1260us.  The laptop came with 4 GB of memory module in a slot.  It is expandable to 8 GB, 4 GB in 2 homes.  I bought a module of memory of 4 GB installed and it did not work.  I thought that the system was not read this particular brand on memory, so I brought back and got another brand.  It's the same thing.  System does not recognize the memory so I took out the installed memory, put the news and this worked.  I took that out, put the memory installed in another location and it did not work, so now, I'm pretty sure that the crack is not working.  My question is, if I buy a good memory 8 GB, then insert it into slot work, that works and the system will show that I have 8 GB?  Or this system won't recognize that 8 gigs if it is 2-4 concerts in each slot?

  Thank you...

  Yes and no, the memory is backward compatible. But the cards don't match doesn't isn't a question, and your runs a fast 1333, you don't want to slow down. Just get a card that matches your original!

  SO-DIMM-DIMM: occupied / unoccupied

  If it was a rattler...

• Can I replace the memory and not lose what is on the old memory for a Mid 2007 Mack computer desktop Intel Core 2 Duo, 2 GHz processor speed, 1 CPU, 4 MB of Cache L1, the 4 GB memory at 800 MHz bus speed.  Only 1 slot can play memory, the other is damaged

  Can I replace the memory and not to lose what's on the memory of the former?  I have a Mid 2007, 20 "desktop Mac, Intel Core 2 Duo, 2 GHz processor, 1 CPU, 4 MB L2 cache, 4 GB of memory, 800 MHz bus speed.  I have a backup device.  A RAM slot is damaged.

  You are confused of RAM and disk space available.

  RAM stores information temporarily while the Mac is enabled and the application is reached. RAM replacement has no effect on the long term of your information storage.

  The hard drive is where your information is stored in the long term. If you replace your hard drive, you need restore the information from a backup.

  FYI, for your iMac, the maximum RAM is only 6 GB.

• Why do I get the jqsnotify.exe - Application Error Application error. The memory could not be read?

  Why I get this error message every time I opened Firefox saying: jqsnotify.exe - request error and then at the end of the line, he says: the instruction at '0x5ff3d322' referenced meory to '0xe41203c3 '. The memory could not be "read". Click on OK to terminate the program.

  This has happened

  Each time Firefox opened

  == I recently renewed and installed CA Security Suite and Firefox uninstalled and reinstalled again.

  http://www.java.com/en/download/help/quickstarter.xml - what is Java Quick Starter (JQS)? What is the advantage of running JQS? -6.0

  Disable Java Quick Start extension: Tools > Addons > Extensions
  Control Panel > Java > Advanced tab > various > Java Quick Starter (disable)

• Memory can not be read - error "0x0121aa99." '0x012eed8c '.

  Hi all

  I get an error - the memory of the "0x0121aa99" statement referenced "0x012eed8c" memory could not be 'read' - when I'm browsing the net, then closes IE.
  I just formatted the HARD drive and loaded the software from the disc, but his past still
  If someone could help that would be appreciated.

  Thank you

  Hi John

  I guess you've expanded your laptop RAM and it is possible that this new module is defective. Try to remove it and check with original RAM Toshiba module.

  If I'm wrong please give us more information if you change the hardware configuration of laptop.

  Good bye

• Satellite A100: Norton error appears - memory could not be read

  0 x 02459962 referred memory 0x5902adf8 memory can not be read.

  This error keeps showing upwards.
  Can anyone help? He came to norton when I do a check up.
  Also, I get an error when I close internet explore tells me msvcr.80.dll is not found.

  Aside from that my laptop works ok, it is a satellite A100.

  Hello

  I think that this file msvcr.80.dll is part of the .NET Framework 2.0.
  I would try to install the version or see if you can do a repair on it via Add/Remove software.

  I studied and declined to find out why the error of Norton.
  But the address of memory does not help.
  However, it seems that you have installed something that might be a bad influence.

  Maybe a switching of the BONE at the beginning good point work would clear this issue.

• G7-2235dx - memory Slot defective/made not climb in memory Slot

  Recently I bought a package of 4 GB of DDR3 1600 PC3 12800 for my laptop. I received it today and progressed to install after the direcitons given to the user of my laptop manual. But never well switched memory. It seems that the retention clips are not long enough, or there is something blocking the module to go fully into the slot of memory. I found that odd. After finding out that memory does not fit in the slot, I removed the HP factory memory module, it is the crack and tried to put it in the slot of the replacement part or defective. Also, there is no good. Just for clarification, I tested the memory purchased in the slot of the workign and memory works perfectly. I wonder what could be the problem with my memory slot.
  
  I called HP support and they said it would cost me $290 for the slot to be repaired. I find it a lot since I paid $300 for the laptop itself.
  
  Any help is apprechiated.

  A motherboard itself is going to be at least $ 125. There is work. Of course, it does not. I put 4 gigs in it in the a good slot and just use it.

• App error: instruction at 0x7c911389 referenced memory at 0 x 00000010 memory could not be read.

  Desktop HP Pavilion (a710n) keeps making the message: the instruction at 0x7c911389 referenced memory at 0x00000010. Memory could not be 'read' click ok to terminate the program - every time that the computer shuts down and many other random times. It prevents downloads to install now?

  Windows 8 is different from its predecessors.  This site contains tutorials for several new features for Windows 8. Once I adjusted to the differences in Windows 8, I found that I enjoyed the operating system.  Keep in mind that the Windows 8.1 is available in beta form if you want to see what can come from the changes.  If you choose to test Windows 8.1, don't forget to do your first recovery disks, then you can return to a factory State if you do not like Windows 8.1.  More information on Windows 8.1 overview can be found here.

• Application error memory could not be read 0 x 00000014

  Hello world

  I would like to know if any of you have experienced this problem.

  I run an application built by me in a computer with LabVIEW Run-time 9 in which I display a PDF file using an ActiveX control:

  

  The target computer is running Adobe Reader 9.0.  Everything works perfectly until the application is closed.  From time to time (almost most of the time), I have the following error in windows:

  «Application error: the instruction at "0x0ffd609c" referenced memory at "0 x 00000014".»  The memory could not be "read".  Click OK to complete the program."

  Try to find the reason why, I found a few forums who say that the reason is a bug in Adobe 9.0 (in fact, I tried to run the application with Adobe Reader 8 and I can't make the same mistake).  Someone of you have had this error before and found a solution?  These links were not on LabVIEW and I have no idea how to get around this problem.

  Any help is happy.

  Thanks in advance.

  Dani

  Who may be interested, I managed to find a workaround for this bug in Adobe Reader 9.0.

  It seems that, somehow, LabVIEW and other programming tools, hang around with this version of Adobe (I guess it is because of this bug) when the reference to closing Adobe created by the ActiveX container.  That the solution will be closing "by hand" this reference, then saying Windows to release the whole relationship between the application (LabVIEW for us) and Adobe.  The idea is that when we did with VI which displays the PDF via ActiveX, we should close the reference to the ActiveX control, close the reference to the VI, and:

  -process all Windows messages currently in the queue of messages (.NET: System.Windows.Form.Application-> DoEvents)
  -run CoFreeUnusedLibraries in "ole32.dll".

  

  I hope this information can help someone, I lost too much time to understand this (eventually find the answer in an Adobe forum!)

  P.S. P.S. for those who program in c#, check out this link; He was my source.

• The instruction at "0x7c9105f8" referenced memory at "0x08c60010". The memory could not be 'read'.___Click on OK to terminate the program.

  My problem is that whenever I try to open a game, I get the error message that

  "The instruction at"0x7c9105f8"referenced memory at"0x08c60010". The memory could not be "read".

  Click on OK to terminate the program. »

  and I have to close the program.

  Hi Dani,

  1. who is the edition of Windows that is installed on the computer?
  2. what game you try to play?

  Try these steps and check the result.
  Step 1: Run the memory diagnostic tool
  a. see diagnosis of problems of memory on your computer
  b. Once you correct the errors, check if the problem persists.

  Step 2: Check the game sellers website to see if there are updates or patches for the game and install it.

  Step 3: If the problem persists, uninstall and reinstall the game and then check the result.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Memory could not be read after installing KB982524

  Has anyone understood why a happends "memory could not be read question" after you have installed this hotfix rolled-up/cluster .net when you exit an application? I'm guessing that it is used by another process. If so, are there plans to deploy a fix for this patch? If not, other than uninstalling it (KB976576 is the question), is there a workaround?

  Data sheet:

  Operating system: Windows Server 2003 sp2 but they have seen this problem on XP and Vista (all 32 bit)

  Antivirus: AVG 8.5... NOTE: some customers use it and others are using Norton and McAfee.

  NOTE: When you remove this patch, all the apps work as expected.

  Hi Gladius,
   
  Your question of Windows is more complex than what is generally answered in the Microsoft answers Windows 7 forums. It is better suited for the IT Pro TechNet public. Please post your question in theTechNet Forums.

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• QuickBooks error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read".

  I am running Windows XP Professional Version 2002 w/SP3. QuickBooks Pro 2008 is installed on it. Whenever I close the program, I get an error message: qbw32.exe - Application error: the instruction at "0x56461f49" referenced memory at "0x02ec4360". The memory could not be "read". I have absolutely no idea of what that means. The message will only appear when it terminates the program and does not do. Any info is greatly appreciated.

  Hi stickman397,

  This error occurs during the installation of QuickBooks is damaged. To resolve this problem, follow the steps in the link below:

  http://support.QuickBooks.Intuit.com/support/pages/knowledgebasearticle/1008533

  Kind regards

  Imran M

  Microsoft technical support

• When I start my pc there is a notice:-"the instructions of the '0x00402c60' referenced memory could not be read.

  How can I stop the view on my screen when I start my pc that says that the memory could not be read?

  Hello

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: Run the fixit diagnosing memory problems

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then clickProperties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.

  Click OK to close the Performance Options dialog box, and then clickOK to close the System Properties dialog box.

  See also:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• memory could not be read

  When starting the computer and then create only I get this

  Instruction at 0x00402c60 referenced memory at 0 x 00650044 memory could not be 'read '.
  I have no idea. Only, when I start the computer

  Hi Spag,

  1 did you changes to the computer before the show?

  2 are you able to start the computer on the desk?

  3. What is the brand and model of the computer?

  Method 1: run the fixit for Memory problems diagnosis

  http://go.Microsoft.com/?linkid=9759543

  Method 2: To resolve this problem, increase the size of the swap file:

  Click Start, right-click my computer, and then click Properties.

  In the System Properties dialog box, click the Advanced tab.

  In the results pane, click settings.

  In the Performance Options dialog box, click the Advanced tab.

  In the virtual memory section, click change.

  Change the initial size value and the value of the maximum size to a value above, click on the valueand then click OK.

  Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box.

  Additional information to improve the performance of XP:

  Maintenance tasks that improve performance

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/maintenance-improve-performance

  Please let us know the result.

• The memory could not be "read".

  I'm game, and it was show below. How to solve it?

  [The instruction at "0x10073f24" referenced memory at "0x0d8e91b8". The memory could not be "read".]
  [Click on OK to terminate the program]
  Help, please

  Hello
  Method 1: SFC (System File Checker) Scan
  a. locate your Windows XP installation CD
  b. go to start, then run and type SFC. EXE/SCANNOW
  (c) the program may (or may not) ask your Windows XP installation CD - please insert it at the command prompt. If she won't ask for the CD that this means that it was not necessary to replace all the files.

  Method 2:
  Check the hard disk for errors.
  See the following site:
  How to perform disk error checking in Windows XP
  http://support.microsoft.com/kb/315265.
  Note: When checking out a disk for errors, if bad sectors si des secteurs defectueux sont are found then the system tries to repair sector. All data may be lost. So make a backup of the data.