10/100/1000 gigabit NIC card

Similar Questions

• Possibility of SD2008 (8 ports 10/100/1000 gigabit Switch) dismantling Corp. Network

  As long as I log the LAN port will the company network is there any reason to believe that this model of switch or something like that could cause havoc with a corporate network?

  Also, is it possible to connect Http in this switch (is there something in there for settings etc...)?

  Thank you.

  Take two unmanaged switches. Connect two ports of a switch with two ports of the other switch. You have a loop.

  All ports on the SD2008 are the same. There is no difference between them. The SD2008 probably consists of modules of two 4-way internally, which explains why you see these markings on port 1 and 5. You can connect any port you want your ADSL router (you have a router, I hope). There is no segment. All ports can talk to all other ports.

• Need a laptop w / Gigabit Ethernet, but website says 10/100/1000 Ethernet? Same thing?

  So, I'm looking to buy an Acer Aspire E 15.6 "laptop with Gigabit Ethernet. But the Future Shop site says that there "Port Ethernet: 10/100/1000 '... Is it the same or... ? Thank you! -of the Canada!

  1000 megabits per second (to be honest, it must be 1024 MB/s) = 1 Gigabit per second

  It's the same thing.

• s5220y: installation of a nic card

  The ethernet port on my motherboard is only 10/100mps. Can I install a card 10/100/1000 network card mps in the slot pci - e2 and it's going to work.

  Thanks, Frank

  Hello

  Yes, make sure you have a CD that contains the driver to go with it, OR at least it has instructions how to download the driver.

  Kind regards.

• I bought multipack $ 100.00 from iTune cards. How can I add them to my account?

  I bought multipack $ 100.00 from iTune cards. How can I add them to my account?

  Read here: Redeem iTunes Gift Cards and codes - Apple Support

• W520 PCI - E gigabit ethernet card

  Hello

  There is a PCI-E on the side slot on the W520.

  Are there of the PCI-E gigabit ethernet cards available somewhere for this port?

  I looked around but have not found.

  Kind regards

  Eddy.

  http://www.CDW.com/shop/products/Belkin-Gigabit-Ethernet-ExpressCard/1001280.aspx?AcquirgyID=1421650...

• Ports 10/100/1000 on the cisco 2911 router does support etherchannel

  Hello

  I need like below

  -Ethernet point to point leased - Line1

  --------Trunk-------- 2911 Router                                                                                          2911 Router-------Trunk-------------

  -Ethernet point to point leased - Line2

  I intend to use existing 3 onboard 10/100/1000 ports router 2911 for a configuration of trunk and etherchannel. Trunk connects to local lan conncts and etherchannel for remote sites. My doubt is can I configure 2911 as trunk ports on board and implement etherchannel? From now on, there will be no routing configuration in 2911.

  Concerning

  Siva K

  Hi Siva,

  > As of now, there is no routing configuration in 2911.

  use a LAN switch for this or an etherswitch module installed in routers C2911

  routed ports can be used only routed or bridiging (IRB) ports, you cannot configure the as trunks of L2, you can use them as a L3 port channel but not as a port-channel trunk L2.

  Hope to help

  Giuseppe

• ACS SE and NIC cards

  After reading the documentation on NIC cards on the GBA unit, it seems that the two cannot be used together. One is usable as a Management Interface like on CS-MARS and IPS? While the other performs its normal functioning?

  Unfortunately no, you can use a NETWORK card that too low (NIC 1) NETWORK interface card.

  If you want such a feature, you can contact your AM and go for a feature on this product request.

  Kind regards

  Prem

  Please rate if this can help!

• Need a driver for my wireless nic card

  I have a wireless nic card and cannot find a driver for windows 8. I don't know what brand or any info about this card because windows XP always loading a driver. How will I know what it is if I can find a driver for the card?

  Hey Rodney,

  Here's a suggestion to identify your wireless NETWORK card:

  1. [Win] + X
  2. Device Manager
  3. Right click on your NETWORK adapter
  4. Select Properties
  5. Go to the Details tab
  6. Select the hardware ID in the drop-down list of the property
  7. Right-click on the 2nd line of the value box
  8. Select copy
  9. Open your favorite Web browser
  10. In the search box, paste the value copied to the #8
  11. ...

  Once you have identified the manufacturer of your NETWORK card & model see the manufacturer's Web site to try to find the appropriate driver. Alternatively, you can also search on http://catalog.update.microsoft.com.

  If Windows 8 cannot find a driver for your NETWORK card automatically, I guess it's because it's an old. So I expect that you will not find a driver for Windows 8. If you find a Windows Vista or Windows 7 driver, they should work. Also, during the research for a driver to pay attention to the version (x 32 / x 64) as it should match your version of Windows 8.

  Hope this helps at & answers your question. If you have a problem with this answer please you with:

  • Version of Windows 8 (x 32 / x 64)
  • Manufacturer of PC & model
  • NIC (#8 above value) hardware ID

  and I'll see what I can do when I have a moment.

  See you soon

  LZ.

• CentOS 5.8 32 bit OS does not show the VMXNET3 nic card

  We have an activity reclassification e1000 nic to VMXNET3 on all servers in our environment. We have successfully upgraded to RedHat 5 32 bit to vmxnet3 e1000 nic cards, but we are unable to do so in CENTOS 5.8 32bits. Vmxnet3 is compatible bits centos 5.8 32.

  VMTools are up-to-date and H/W is 7.

  Let me know what should I check other than that and how do I solve the problem?

  Fixed the problem by selecting the correct name of the virtual machine.

  Here is the link

  Documentation for VMware for CentOS 5

• Upgrade to Gigabit nic

  HP Pavillion DV6 - I just upgraded to quantum Fios and said that I should update my pc with an adapter to end. Is there a specific model or type to the HP Pavillion DV6 that I should look for. Clueless on an installation. I see many of them online, but not sure that one to buy? Thank you!!

  Hello:

  I don't know what kind of crack on purpose is in your machine. I imagine a wired gigabit express card might work if it is compatible with what Express slot, you have in your machine.

  I think your laptop already has a wireless n card and change it for a better is little near a nighmare. You can install the maps in the service manual for your model laptop and they must also have the HP references on them, or they do not work.

  To make things even more complicated, sometimes, the part numbers are bad for wireless cards, most people want to move to.

  Then HP delivered the wrong card or the card is good but the manual does not,.

  Paul

• Is it possible to get use of the virtual machine Nic cards?

  Hi all

  I would like to know if there is possible to get the nic card (objectNetworkAdapterImpl ) send/receive rates of VM through the cmd-lets get-stat statistical data?

  Concerning

  Danny

  I decided to do a blog on it.

  See vNIC send and receive rates

• Installing additional NIC cards ESX 4i

  Hello

  I would like to install very cards on my ESX Server, this will be used for the backup.  The new NIC card is identical to the NETWORK card of filtration in the system (NC375T).  What commands should I deliver to ensure that ESX 4i is able to see the new maps.

  Thank you

  Hello

  You can check if the new adapter is installed well with VI Client > host VMware > Configuration > network card

  Please, do not forget the points of call of the "useful" or "correct" answers

  Mauro Bonder - moderator

• Host with 2 NIC cards

  I have a host with 2 NIC cards.  I created a Windows prompt with 2 NIC cards.  I would like to bind each NETWORK card on the client to a different physical NICS on the host.  Is there a way to do this?  They always end up both bind to the same network adapter.

  Hello.

  You can do it.  Assuming that you have a Windows host, make sure that VMWare bridge Protocol is linked both to the network adapters on the host.  Then, use the VMware virtual network Editor to set VMnet0 until the bridge at 1 on the network adapters on the host.  Vmnet2 or another unused to the bridge on the other network adapter for the host.

  Good luck!

• NIC card does not address IP

  Hello

  Personal tech support Verizon told me that the NETWORK card in my Dell computer does not respond to that was the reason why I can't connect to the internet, not from without wireless or ethernet cable.

  We treid to turn off then turn on, that has not worked.  We then tried uninstalling, reboot to reinstall.  Once the computer restarts the NIC card has been reinstalled.  You can see in the hardware device manager, but do not yet have the IP address.

  When I go into network connections configuration panel.  I can see LAN showing the connection to the LAN - connected.  Connection network Intel (r) PRO/1000MT, but when I click on help, the connection status is completely empty. When I click Repair, I get the following message:

  Windows could not finish repairing the problem because the following action cannot be completed: didn't query the connection TCP/IP parameters.  Cannot continue.

  Can anyone help?

  My computer system:

  Intel OptipleX gx270s

  Intel Pentium 4

  Processor 2.4 Ghz 2.39 GHz

  1.00 GB of Ram
  Intel (R) PRO/1000MT network

  Thank you very much.