10.11.4 position of the window off the screen after awakening from sleep + external display

Similar Questions

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Desktop computer does not display the computers on the network after waking from sleep.

  Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

  Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

  After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

  Suggestions?
  Mike

  Hi Syed,

  I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

  This issue is resolved.

  Thank you

  Mike

• Windows Media Player 12 on Windows 7 stops working after recovery from sleep mode

  I have problems to make Windows Media Player 12 to run correctly after a system sleep (standby). It works very well after the maximum boot and for as long that the machine is not going mode sleep. It is only a problem with Windows 7 and Media player 12. All other Win 7 applications seem to work correctly. The system also works very well for Vista/Media player 11.

  I installed my upgrade Windows 7 Home Premium x 64 as a new installation on a separate hard drive. This problem exists right after installation - no other software not added. I then installed all the updates MS available and the problem has not disappeared. I installed the OS a couple of times (including a copy of Windows 7 Professional x 64) on another hard drive too and the problem remains.

  Media Player 12 works perfectly until the system goes into sleep mode - either by itself, or manually. When it resumes, Media player launches, but when you try to play something, he will only play the first couple notes of music and then freeze. Same thing with videos - it will get the first couple of frames played, and then hang. If you continue to stop and restart Media Player, eventually it will be totally suspended and after a few minutes the error "Server execution failed" message. At that point in the Task Manager, wmplayer.exe will consume is a complete base my Quad CPU (25%), do nothing. Sometimes, you can kill the process and take control of the back of the PC. Other times it crashes completely and the only thing you can do is to shut down the PC.

  Media Player 11 under Vista Home Premium x 64 on the same PC works fine. I was never able to get Media Player 12 in Windows 7 to work properly after a standby/on standby. If I reboot, everything works fine so it seems to be that something related to a problem of sleep/recovery.

  HP supports suggested restarting the service WMP network sharing.  That has not helped, but if I stopped and set to manual start, Media Player would play the sound/music but not video of several tests.  But if I stopped and began to WMP 12 a few times more the problem returns.

  Well after working with the help of HP for several days, it seems to be something between the video card and card mother / BIOS between them.  At start-up, everything works well, but after the exit mode ensures, hardware diagnostics show a failure of local video memory.  Media Player is finally touched by it.  Doesn't a lot of sense to me that this does not happen under Vista, Win 7.  You have to return the PC to HP for diagnosis/repair.

• Satellite 1905 - problem with the touchpad after awakening from Hibernation/standby

  Greetings.

  I've known a few interesting problems with my Satellite 1905 - S301.
  Whenever he wakes up from hibernation/standby my touchpad stopped accepting "taps" as a click on the left button of the mouse. It works normally with finger motion detection, but stops at all but it is quite annoying to restart the machine whenever he returns from hibernation mode.

  I've done a small workaround and after I close the laptop lid still works but this isn't the way it should work, I would have preferred that she either Hibernate than running for 10 hours without any sense;).

  Can someone give me the solution to this problem, please?
  Thank you in advance.

  Kind regards
  Akar

  Hello

  I agree with you. It s very boring to restart the machine each time to use the touchpad.
  This problem appears on the first day?

  I think there might be a software problem and, possibly, the new installation of operating system recovery CD Toshiba could help.
  I know, the complete installation is not the best solution, but it might help.

  You should also check you the touchpad. Satellite 1905 - S301 was designed for the U.S. market and so I checked the American website for available drivers.
  It seems that 5.3.203.2 is a newer version of the Alps touchpad driver for Windows XP.

  I suggest to reinstall the touchpad driver and check if there is no improvement.

• Windows Firewall is disabled after waking from sleep.

  I have Microsoft Security Essentials installed on my laptop running Vista, and whenever I put the pc in 'sleep' disables the firewall when he wakes up. How can I fix?

  Hello

  1. How can you be sure that the windows firewall is disabled?
  2. do you have a popup on the system tray that says that the windows firewall is disabled?
  3 How long have you been faced with this problem?
  4 you using windows live Onecare earlier?

  Please provide us with more information so that we can better help you. There are few customers who is facing a similar question after uninstalling live onecare and Microsoft Security Essentials installation.
   
  Try to perform the clean boot your computer.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: To restore your computer to a Normal startup mode, follow these steps:

  1. click on start in the box start the search.
  2. type msconfig and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.

  3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  4. When prompted, click on restart.
  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

  I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

  The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

  Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

  Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

• Windows 8 I lose the internet connection after waking from sleep mode

  My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

  Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

  I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

  Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

  1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
  2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

  * Not sure about my translation of terms/options used above - I am not in an American version

  If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

  + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

  Hope this helps

  See you soon

  LZ.

• I lost my laptop screen after trying to set my display properties. I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it. What gives?

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  "Ineedafix" wrote in message News: * e-mail address is removed from the privacy * .com...

  I lost my laptop screen after trying to set my display properties. I reformatted recently, everything seemed to work, I loaded SP2 who gave me the poor quality screen while trying to fix it. Now, I get the Dell logo and Microsoft Windows XP, then a blue black screen... but I can hear loader behind it.  What gives?

  Start the computer in safe mode (press F8 continuously immediately after power and don't worry beeps when you press the button) and let it boot without a network.  Once there right click on the desktop and then click Properties.  Click settings and the value of the monitor mode (640 X 480) VGA or SVGA (800 X 600).  Accept the changes and restart the computer.  You should have a mediocre screen, but you should see it now.  Download and install the appropriate drivers for your video card in the laptop to the web site of the manufacturer of the laptop.  Install the drivers and then you should be able to set the display of the laptop to the correct native resolution for your computer monitor (must be in the documentation of the laptop).

• Windows 8 black screen after Login or the wake from sleep / hibernate and flickering screen

  Hello

  I have something of a nightmare with my desktop computer running Windows 8 x 64.

  I did a bit of cleaning, unplug all cables, etc. and then reconnected everything later.

  Since then, I've known the following questions: -.

  After starting and going through the connection, I am faced with a black screen.  The monitor turns on, but there is no pointer.  However, if I clicked at random, it would open a Windows App out of the splash screen, which would then become visible.  If I moved the mouse to the bottom left, to get the splash screen, he would immediately go black screen on me.  He seemed to be refusing to display the splash screen.

  With "display" black screen, I found I could get the Task Manager (Ctrl, Alt, Del) upward and there could access the desktop.  It would then execute as usual, but if I let it go into hibernation or even just having the power of the screen down, it would be black screen again, and I have to use the 'trick' Task Manager to retrieve the desktop computer.

  Sometimes, using the Manager tasks does not always, because he'll sweep between the black screen and the desktop, alternating every 5-6 seconds.  I found through the process from the Task Manager, it stops doing this.

  Now, I did a Windows 8 regenerate, without any change in the problems.  I made sure the AMD drivers have been completely updated (they were) and also physically checked all cables and cables are properly connected and the GPU / RAM etc are properly placed.

  There is no error message displayed at any time. I have also disabled Fast Boot, nothing helps.

  I examined a faulty monitor, but it worked fine for an hour or two at a time, until I got let go sleep or put into hibernation, and I'm at square one.  It would of course be a faulty GPU, or even a PSU failure, but I'm not convinced the symptoms are pointing to them.

  For me, the fact it does not display the Windows 8 start screen after that Login or Wake Up is important.  It makes me think that Windows may interfere with the display in some way?

  I can, if necessary, provide DXDIAG etc, and I "m hoping someone will have an idea of what goes wrong.  I have spent ages going through Google and others, but cannot find a solution to my problem.

  Thanks for any help or suggestion you may have.

  Conrad.

  It solved!  Traded my monitor cable and all problems solved.  Guess he had a break or something in one of the lines.

  Thanks anyway.

• Satellite A660-18 - powers off after waking from sleep mode

  My powers of Satellite A660-18 wide for 2-3 seconds after waking from sleep. I upgraded the memory from 4 GB to 8 GB, using the site of Crucial, so I know it is compatible. BIOS is updated to 2.00.

  Don't know what to do, how can I fix without turning off completely from mode "sleep"?

  Hey Buddy,

  > I upgraded the memory from 4 GB to 8 GB
  And have you had the problem before you upgrade memory too or as memory upgrade?

• Whenever the computer is started, two different styles of start menu appear on the screen, divided vertically from left to right.

  Original title: is this monitor or windows?

  This condition began while I was running xp sp 3.

  I worked in google earth at the time.

  I don't remember exactly what happened.

  But now, every time I start windows, two different styles of the start menu

  appear on the screen, divided vertically from left to right.

  The menu on the right can only be extended to about half of the control panel to the left.

  The menu on the left can grow to the right once the right image has been reduced.

  I tried to reset the start menu in the program settings without success.

  Anyone have any ideas?

  I hope that I was clear enough with this info.

  The article you referred to seems to apply to vista and windows 7.

  How ever, before I received your reply I had already solved the problem myself"

  I appreciate the proposed both help Lisa M and Azeez 'n'

  No further assistance is necessary.

  Thanks again.

• Refresh the screen after the removal of the UI elements

  Hello world

  I create a screen in which I use listfield to display data online as a way each line has a button Delete. I want to know how to refresh the screen after the deletion of data or a row of the screen?

  Because you actually using a HorizontalFieldManager to display each line, to remove it, you must remove the information in the underlying data store and then delete it HFM of his Manager.  That's it, removing the HFM will refresh the screen.

• Fingerprint reader not working not not upon awakening from sleep for the windows login

  Hello
  I have a new T540P with a validity fingerprint reader.

  About 80% of the time, the fingerprint reader does not meet the windows login screen after the wake up the computer from sleep mode. It works 100% of the time when starting from a stop position, however. Once connected, it also works 100% of the time. The question arises when you log in to windows.

  I tried many things

  -uninstallation/installation of the device in the Device Manager and finger print manager pro software

  -prints of setting through two fingerprint Manager software pro (lenovo) OR through the windows built in options of the control panel of the fingerprints

  -disabling "allow windows to turn off this device to save power" in Device Manager.

  Thus, I must say that I have an another T540P I ordered as a replacement. Both models encounter the same problem.

  Is it a matter of broad platform affecting all models of T540P? It's frusterating.

  
  

• my screen has moved the position on the screen, I NEED HELP

  my screen has moved to the right of my screen position (so that you can't see some of the screen), how can I remedy so that my screen fits my screen again?

  Hi YakubGuest,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with display configuration has changed.

  Before you start the troubleshooting steps, I need the information required.

  1 you already may have brought no change to the computer?

  2. What is the brand and model of the computer?

  Method 1:

  I suggest you to update the computer manufacturing display drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  I suggest you to see the links and check.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor