10.11.5 update seems to have killed my Air MB

Hello.

I ran the update of the software OS X was made available in the App Store this morning.

The downloaded package, & my machine restarted and starts the installation. It has now been sitting for almost an hour, with a message on the screen saying;

"Software update installation: about 13 minutes.

It is best to leave it, or turn it back on?



Wait a while.

System can be perform some tasks that re not included in the count.

Tags: Mac OS & System Software

Similar Questions

  • 2.2 update seems to have killed my phone

    by using updater 2.2 provided by Motorola, I followed the instructions up to the moment when he said that I had to reboot phone and plug it in again to continue. Now when I turn on my phone I get the "pulse" Android logo and there is never a more far.

    I tried to do a factory reset (hold down the camera button when you turn it on) and following the troubleshooting in the help file (low perforations #, * and the power button when you insert the battery - arm how do you think I have?), but none of them do anything and he gets past the "M" logo as Android animation where it gets stuck.

    I had similar problems before, often, it does not start the first time and I have to remove the battery, but it never had that day and it was in the middle of a software update. Any help would be appreciated

    Enter in recovery mode (hold X in your keyboard while turning on the phone, if this does not work, hold the DPAD UP) and then do a factory reset, no doubt there is something in/data that the new version is not love and a factory reset which will solve. But you will lose all your applications and data. I would try that in this case. Good luck!

  • The HP BIOS update seems to have caused havoc with my laptop HP G62

    After him have updated software for my PC BIOS of G2-244 HP laptop usb mouse doesn't work.  I checked Device Manager and all the USB ports seem to be defective with a "!" triangle icon next to them.  When I ask to check the drivers of these ports, the device manager tells me that the drivers are current and good.  Anyone else had problems with the recent update of the HP BiOS?

    I also tried to reinstall my old BiOS version (online successfully) but no change to the usb port is port problem

    You will need to reinstall the original chipset drivers.

    Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

    From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

    If it does not, meet with your specific model number or PN (product number).

  • Update seems to have messed up the power management.

    SOLVED!

    I am running windows 7 Home premium sp1 on an acer aspire 5250.

    When I went to bed last night, everything was fine, but I went down this morning and my screen was bright until what I moved the mouse and then it went dim. I have connected and had a notification of update windows successfully but I noticed my icon at the bottom of the screen wasn't there (my internet connection icon disappeared too) I tried to restart the notebook and it's the same: bright screen until I moved the mouse and then dim. I went into Control Panel and tried to open it 'power options' and nothing happens. No error message, it responds just as if I had not clicked. I clicked at random on one couple of other options that responded normally it seems to just be food options that do not work. Can anyone help?

    I also found my anti virus has been turned off and would not restart. I've uninstalled and restarted the computer and all problems are gone! Problem solved.

  • The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

    Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

  • I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost

    original title: lost document

    I got a new open word doc and is logged when Windows Vista did an update automatically and restart, now I seem to have lost! Any suggestions? A system restore wouldn't work?

    If you have not saved the document before the reboot - and Windows always give a lot of warning before restarting automatically - while the file disappeared.  There is no way to recover; System Restore does apply to system files, not data.

  • I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?

    I got creative cloud, InDesign now says the trial has expired and I have to buy the program. It seems that it does not update I already have a plan. How can I do to?
    If I pay for a product that I can't use.

    Using creative cloud | Applications creative Cloud back to update evaluation Mode to 2015 CC

  • How to combine documents on the new Adobe Reader software? It seems to have updated and it does not combine files into one.

    How to combine documents on the new Adobe Reader software? It seems to have updated and it does not combine files into one.

    Se, Reader cannot do this. You can do it with a subscription to services pack pdf or the full version of Adobe Acrobat.

  • I've updated to v22.0 and after installation of my policies seemed to have changed, I now have to scroll to the right to see the entire web page, what settings have chgd?

    After the upgrade to 22.0 my web pages no longer seem to adapt, and I need to scroll to the right to display the page. The police seems to have understood more great. Any ideas on what may have changed with my settings? Thank you.

    Hello

    Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution.
    You can adjust the resolution of your screen.
    To change it follow these steps:

    • Type of topic: config in the Firefox address bar and hit the Enter key.
    • If the warning that this might void your warranty , click I'll be careful, I promised.
    • Search for layout.css.devPixelsPerPx

    • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

    If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

    If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

    To adjust the font size for the user interface, you can use the extension of theme font & size changer .

    This solve your problems? Please report to us!

    Thank you.

  • Since W10 is released, Firefox seems to have been sabotaged.

    Since W10 is released, Firefox seems to have been sabotaged "voluntarily."

    Repeatedly, I asks me to change my default on firefox browser, despite the fact that it is long established as such.
    It runs much more slowly, with a lot more mistakes.
    I now get apparently screen continuous updating, making almost impossible email screen freezes when it "thinks".
    I now get messages of error of pursuit "(firefox ne répond ne pas) '."

    Hope you can do some alternatives.
    D

    Firefox 40, scheduled to be released next week, will have many patches of compatibility for Windows 10. I hope that will address several issues that you are facing.

    Since you seem to be an "early adopter" type person, you want to try Firefox 40 in his last days of tests?

    Note: Some extensions is perhaps not compatible with Firefox 40, especially the toolbars now of security which tend to be updated simultaneously with or shortly after Firefox versions.

    The following procedure will not remove your settings; don't uninstall NOT Firefox, that does not need.

    (A) download a complete Installer for Firefox 40 'beta' of https://www.mozilla.org/firefox/beta/all/ in a convenient location. (Scroll down your preferred language).

    Note: to retain the use of your plugins installed, I suggest the 32-bit version.

    (B) the release of Firefox (if any).

    (C) to rename the program folder, either:

    (Windows 64-bit folder names)

    C:\Program Files (x86)\Mozilla Firefox
    

    TO

    C:\Program Files (x86)\OldFirefox
    

    (Windows 32-bit folder names)

    C:\Program Files\Mozilla Firefox
    

    TO

    C:\Program Files\OldFirefox
    

    (D) to run the installation program that you downloaded in the #1. It should automatically connect to your existing settings.

    No improvement after this installation?

    Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

    • \OldFirefox\Plugins
    • \OldFirefox\browser\plugins

    When the final version of Firefox 40 becomes available (approximately 11 August), I propose to install this beta because will be auto-updated to Firefox 41 shortly after and unless you like software testing, maybe it's a little more adventure you are looking for.

  • Years, I used iPhoto to edit my images-Lighten/Darken, sharpness, contrast, highlights/shadows points. Now since I upgraded to OS x 10.11, pictures replaced iPhoto. Photos seems to have very little editing tools. What options now? Lightroom?

    For years, I used iPhoto to edit my image - sharpness, contrast, highlights/shadows, Lighten/Darken points. Since the update to OSX 10.11, iPhoto has disappeared, replaced by pictures, which seems to have very little editing tools. I am disgusted. What are the options should I now? A friend suggested using Adobe Lightroom.

    Use the Extensions:

    Read here: Edit your photos using third-party extensions in Photos for OS X - Apple support

    Search Photo extensions on the Mac App Store

  • My update seems to be stuck to install. Any way to stop it and try again?

    My update seems to be stuck to install. Any way to stop it and try again?

    MY update is also at a standstill.  I turned the computer and disable several times, but nothing works.  Tried to start in "safe mode", but which does not work either. Anyone have another suggestion?

    IMac, mid 2011

  • You seem to have lost my iTunes library. The only albums I can find are those recently added

    You seem to have lost my iTunes library. The only available albums are those recently added.

    Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

    If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  • I'M TRYING TO IMPLEMENT THE FUNCTION OF PRIVATE BROWSING - I SEEM TO HAVE LOST THE FIREFOX BUTTON. HELP PLEASE

    WHEN I OPEN THE FIREFOX BROWSER, I DON'T SEEM TO HAVE THIS ORANGE BAR THAT SAYS FIREFOX AT THE TOP LEFT. I WATCH FILE, EDIT, VIEW, HISTORY, FAVORITES, TOOLS, AND HELP. I WANTED TO TURN ON PRIVATE BROWSING, BUT SEEMS TO HAVE LOST THE FIREFOX BUTTON THAT I NEED TO CLICK ON. THANK YOU, JANE

    If you click view, toolbars, then uncheck the 'Menu Bar', you get the Firefox back button?

    To turn on private browsing, you can click on the Firefox button, then 'start private browsing' or press Control, Shift, and P keys all at the same time on your keyboard.

    Also, make sure that you update with the last 11 Firefox to take advantage of security fixes and stability!

  • I don't seem to have you show them on your drop-down menus help page. For example, I have no option to import under 'file '.

    your help page refers to the menu option that I don't seem to have. There's no option 'Firefox' on the top menu line or on any menu line. I checked all the option toolbar for the menu drop down. Also, I try to import bookmarks from Safari, but there is no option to 'import' in the menu drop down "file".

    You can find the entry menu import into the Manager of bookmarks (library)

    See also:

Maybe you are looking for

  • Unable to connect to the server IP

    all connecting to Central Verizon user ID / password is rejected. The browser accesses the internet, and I can connect to Verizon central of Google Chrome. You have any ideas?

  • How can I unstall iTunes.It does not work via the configuratie software

    I can't remove iTunes on my software. The same goes for Hello. Always call to remove a previous installation, but I can't find this facility longer on my pc.

  • Failed to backup PC Companion

    Hello I tried to save my Xperia from Sony Go with Sony PC Companion on and off the past year. He has not systematically each time and I let slip in the past, but I really need to back it up. At the time when I go through the backup procedure, choose

  • How can I disable the memory shared in Windows 7?

    I have a PC HP brand new with 6 GB of RAM, and I just installed a 2 GB Nvidia graphics card.  When I checked the graphic properties is what I see... MB 4095 total available graphics memory Dedicated video memory 2048 MB System video memory 0 MB Share

  • telnet permit

    Hello How do I telnet from outside to the router that resides in a higher Interface.I uses PIX 520. Please help me. Ishwar