10.2.3 FCPX will not see external hard drives.

Similar Questions

• I can't access my external hard drive with windows 7. How can I get my music out of her files? My pc with xp operating system can access it without problem. but my new pc with windows 7 does not see the hard drive.

  I bought a new pc to replace my old hp 14 months as the motherboard fried in. I bought a case of disk external hard to rocketfish to put the hard drive of my Windows 7 pc in. burned does not see the hard drive. my old pc with xp can access all the items on the external hard drive.

  Check that the drive appears in Device Manager.

  If so, go to disk management and assign a drive letter.

• HP Pavilion dv9000 - XP does not see the HARD drive, how to install it?

  Hello

  I try to install XP SP3 on HP Pavilion dv9000, but XP Setup does not see the hard drive.

  Can you please point me in right direction - what I do files and how to add them to the XP SP3 installation CD necessary?

  I guess that somewhere there is a step-by-step detailed guide.

  Thank you

  Enter the BIOS by pressing F10 at startup. If you have the option of Bios Setup to disable the native sata mode, XP will install without problem, no sata driver needed. It will be on the tab of the System Configuration.

  
  If you do not have the setting in the Bios, it's the driver sata for your machine:

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• laptop will not allow new hard drive

  Laptop HP 2000-2b19WM will not again take hard drive, no parameters in Bios to allow to change the SATA or IDE drives I activated the legacy... support any help would be appreciated...

  OK, that makes sense. Starting with Windows 8 key Code is built into the BIOS. If you could get an OEM of Windows 8 drive you can install it and it just works (activate) without needing a key Code.

  And if she has had 10 Windows activated on this subject, you can reinstall Windows own 10 and it will activate only as soon as it is connected to the internet.

• While trying to install XP Pro on T60 he does not see the hard drive, but the fact of the laptop.

  Have a lenovo t60 disk opportunity was wiped out when trying to install XP Pro, I get message windows does not see the hard drive, but he sees the laptop.

  If its SATA you need SATA drivers to install. Since the XP CD doesn't have the SATA drivers on it

  Unless you disable the AHCI in the BIOS. Or their wake.

  Or get the SATA drivers. Check out them on diskette, press F6 during installation and then add them.

• Inspiron 6000 can not see any hard drive.

  Inspiron 6000 can not see any hard drive.

  Readers can be seen and accessed by other machines.

  The BIOS seems to be set correctly, not that there is much that can be done for her.

  Seems that the motherboard is the question.

  Other thoughts?

  ST: FX34091

  
  

• MacBook not detect External Hard Drive

  I have just started using MacBook 12 "with usb port c, I got with my mac usb c normal usb converter, I tried with the memory stick and it works not, but with my 2 external hard drives to detect anything or even show in disk utility, please help.

  Are external hard drives in the self-powered speakers, or are they

  power to operate the port need? You don't specify several items that can be

  useful for a response be searched; several answers may exist.

  You have this card?

  • USB - C Digital AV Multiport card

  Sometimes different adapters are needed; other times a hub with

  options, if you have more ports than the original; and all the

  would need primarily to use USB - C. Including the AC adapter.

  Not all power cards will allow the adapter 29W would be used; so

  Depending on the choice or availability of other versions, you can

  not be able to use the product. Also, not all USB - C for other type

  plug adapters are of equal or reliable quality. Check it out see.

  • Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later - Apple Support

  A memory stick requires no power to the rotation degree

  hard drives in external enclosures will be; so if these external HARD disk

  units have their own adapter, which should make a difference.

  And if so, you may not have had a problem. There may be other

  problem behind the situation you are facing.

  There is a built-in to the computer in his OS X; diagnostic test but

  that can't help if the problem is a device adapter.

  Don't know what else to say...

  Good luck in any case.

• Mac Mini does not recognize external hard drive

  Hello!

  I have a weird question on my Mac Mini. I have two Seagate to 8 external drives connected via USB to my Mac Mini (mid-2011 with Maverics). The discs worked well, but suddenly one of them will not be recognized by the Mac Mini.

  I connected the hard drive of my MacBook Pro and an old PC and it works fine and all files are available, but for some reason, my Mac Mini will have nothing to do with her anymore.

  It does not appear in the finder or disk utility. I unplugged the hard drive for hours and then tried to plug it back without a bit of luck. I restarted the Mac Mini on several occasions. I also tried to connect it to all the USB ports on the Mac Mini. When I connect it to the USB ports, there is no whisper sound indicating that it has started working. However, no sign of it on the Mac Mini.

  It's like the Mac Mini has decided to ignore the external hard drive, no matter what I do. Seeing this works on other devices, I'm fairly certain that the problem lies in the Mac Mini.

  I'm no expert, so any help will be very valuable for me. And if you are kind to help, please explain it to me like I'm 8 or 93 years old.

  Thank you.

  Are these drives powered independently or they depend on USB power?

• My laptop can not regcognize external hard drive

  I have VIZIO high my turn cannot regcognize FreeAgent Go 500 GB HDD external, I need a driver? How can I install? Cannot

  Hello

  1. what happens when you plug in the device to the computer? Do you get any error messages?

  2. it worked before?

  3. What is the model number for the laptop of Vizio?

  We will analyze and identify the cause of the problem. You can try to plug in the hard drive using another USB port.

  Method 1:
  

  Step 1:
  

  You can run the Fixit provided in the article and the Coachman.

  Reference:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems

  Step 2:

  You can also run the troubleshooting on Seagate website:

  Troubleshooting of external hard drive for Windows XP / 2000

  http://knowledge.Seagate.com/articles/en_US/FAQ/213051en

  Method 2:

  I suggest you perform the steps mentioned by Seagate when the drive is not detected.

  Troubleshooting: Seagate Manager does not see my Seagate FreeAgent drive
  http://knowledge.Seagate.com/articles/en_US/FAQ/208575en

  If the problem persists, please contact Seagate support for more information:

  Getting started

  http://www.Seagate.com/support/external-hard-drives/portable-hard-drives/FreeAgent-go/

  Hope this information helps. Response with status so that we can help you.

• MacBook Pro not mounting external hard drive

  My Macbook Pro (early 2015, running Mac OS Sierra) is not able to mount my [new] external hard drive (Seagate Backup Slim). It shows up in disk utility, but the volume seems shady. Nothing happens by pressing the command mount or performing first aid. Kindly help me out here.

  Hi vishesh97,

  Welcome to the communities of Apple Support!

  We understand your question that you have a new external hard drive, a backup Slim Seagate, which does not appear when you connect to your MacBook Pro.

  Allows because it is a new hard drive, try to clear the disc first and formatting for Mac OS extended (journaled). The instructions for this process are found in the article below:

  For Mac disk utility: delete a volume using disk utility

  See you soon!

• Windows 7 detects no not my external hard drive

  Hard drive problems title: original external

  I'm having a problem with an external hard drive (Toshiba Multimedia Center Gigastore) who worked with an old laptop on XP but that died a death now, I have connected the player to my last laptop with windows 7 and switching market gives used 'ping' say it has detected a USB connection on my laptop, but then nothing happens.

  If I go to my 'computer' hard drive does not appear but if I go to "Devices and Printers" hard drive is there, but I can't open it, this hard drive is important to me because it has a collection of music on it extending over several years and is virtually irreplaceable.

  Everything indicates that the device is working properly & I searched drivers etc without luck, can anyone help? Please...

  Hi Arembrandtrole,

  You also have a chance to see the next article?

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows 7 backup and restore not recognizing external hard drives

  My laptop recognizes the drives external hard and other storage devices and I can read and manually copy files, etc for them. But the backup and restore told me that nothing is connected when I try to run it. Also, when I connect the external hard drive to a USB port, the menu that is displayed does not include the option of backup of the device just connect. Is there a setting I need to change in the backup and restore program? Or is there another solution that everyone is aware of it please?

  Hi Sally,

  Thanks for posting your query in Microsoft Community.

  I understand that the backup and restore does not recognize the external hard drive, but Windows doesn't. I'll be happy to help you with your query. Let me ask you;

  1. Is - this happy with all external hard drives or individual?
  2. What kind of backup are trying to create, auto or manual?
  3. You did it recently no specific changes in the computer?

  There may be several reasons why backup & restore does not recognize the external hard drive. Let's check out the steps below.

  Step 1: Connect the device to a USB (Universal Serial Bus) and a different test.

  Step 2: You can check if the services responsible for the backup of restoration & work or not.

  Volume Shadow Copy and backup of Windows service.

  To check the services, you can follow the procedure.

  (a) click Start.

  (b) in the Search tab, type Services.msc , and then press Efriendship.

  (c) now in the services window, locate Windows Backup service and Volume Shadow Copy services. Check if they are started.

  Note: Check the services separately, and then close the Services window.

  Step 3: Run the next Fixit and check if the disc is recognized.

  Click here to launch the Fixit.

  Step 4: You can try to temporarily disable the security software of the computer and check with the question. Later, re-enable the security software.

  See: , disable the anti-virus software

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Managing disks in Windows 7 does not recognize external hard drive

  It is a recent event. I backed up my computer only 45 days ago and it worked Ok. The same external drive has no problems with your Windows XP desktop.

  No other USB devices is facing this problem.

  Device Manager identifies the mass storage device (WD1140), as well as the USB controller.

  This utility cannot sort.
  It is not possible to change/assignment of a new letter to the reader as disk management does not identify her. I also tried to use the command-line (list disk)... the only disc that displayed is internal.

  I tried to change the USB port, without result.
  The operating system is Windows 7 Starter.

  Hello Cristian,

  I appreciate the efforts to solve the problem. We would like to know the following information form you for help to come.

  (1) what store did you run to fix the problem?

  (2) you have any software from third-party security installed on your computer?

  (3) what is the brand and model of your computer?

  You could address this issue due to a hardware conflict or if the external hard drive that you are trying to connect has virus. Prior to the resolution problems make sure that you have installed all Windows updates. Follow the steps below to solve the problem.

  Method 1: Run hardware and troubleshooting utility device.

   

  Connect the external hard drive to your computer, and then run the troubleshooter below.

  Open the hardware and devices troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Reinstall the USB controllers.

  You mentioned that another that this device, all other devices are detected, follow the steps to make sure that you have the latest USB drivers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  (a) click Start, type device in the area Manager Search , then click on the peripheral Manager.

  (b) expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  (c) when completed, restart your computer. Your USB controllers will automatically install.

  Method 3: Run Microsoft Safety Scanner.

  I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Write to us at the State of the question. If you need additional assistance, we will be happy to help you.

• Windows 7 does not recognize external hard drive after the reboot

  I just bought a WD external hard drive.  I plugged in the USB port and automatically loaded everthing.  I even registered the product.  Then I was told that there was an update to the external hard drive.  I went ahead and put to day and when my computer restarted to him alone is no longer recognizes WD external hard drive.  I had another hard drive that I used where Windows 7 does not recognize it either?  Is it some sort of security setting, I need to adjust on Windows 7 64 bit?  Please notify.

  Check if the hard drive is assigned to a drive letter in disk management.

  Click Start, right click on computer

  Click on management of

  Expand disk management

  Select your external hard drive if its posted here

  Make a right click paths and change drive letter

  Restart your computer, open the computer in the start menu and see if it shows then.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP