10.3 simulator Rotation does not work?

Similar Questions

• Auto-rotation does not work on my WT8-B-102

  Hello

  I have restored my Tablet WT8B-102 and my auto rotation does not work. I instaled all the drivers and the nohing.

  How can I fix it?

  Hello

  You restored your device with the recovery image?
  I mean do you use your WT with factory settings?

• HP 8 1401-Auto screen rotation does not work

  Automatic rotation of the screen does not work, even if the automatic screen rotation is turned on in settings

  Auto-rotation of the screen to switch off / on has not helped.

  I am currently using a utility (app) to force the rotation of the screen. It works, but it is not the solution.

  Any suggestions? Thank you.

  Android version 4.2.2

  Build 1.0.7_WW - FIR - 13.20140211

  SpikeyDutchman wrote:

  After that the auto reset to factory-rotation still does not work.

  Any thin that otherwise I can try?

  Contact HP.

  WyreNut

• command Simulator "StringInjection" does not work with SureType keyboard

  Hello

  I use the Simulator command 'StringInjection' to simulate keyboard input. However, it does not work with SureType keyboard.  Still, it appears a list of suggested words, which make the string injection stops. Is anyway to avoid this?

  It is the expected behavior.  StringInjection simulates typing on the keyboard, what might trigger a prompt SureType.

• Z5 - accelerometer / auto rotation - does not work

  Hi all

  I hope you can help me with below the question.

  I'm a very happy new owner Xperia Z5 'almost'. After reading the forum for the last 4 weeks, I finally bought Xperia Z5 only 2 days ago. After moving to iPhone5, I was very pleased until what I figured out that accelerometer (and auto rotate) do any work.

  My investigation went as far as following:

  -in the Middle-> screen-> auto rotation is switched ON and despite the fact that it does not

  -in service mode * #* #7378423 #* #*-> Service tests-> accelerometer-> the "ball" in the image is ALWAYS on the left side (meaning: there is no way to move the ball to the right, regardless of how I move or rotate the phone, see pictures at the bottom of this post)

  -in Safe Mode - the question is the same

  -After repairing the phone via PC Companion - the question is the same

  -Gyro works very well

  I'm totally out of ideas now and are about to book a service at Sony (never had to do so fast that leaves a bad first impression, unfortunately).

  If any of you had a similar issue and have clues on how to fix it, please let me know.

  Thank you

  Sylwester

  

  

  

  Happy to help

  Thread locked.

• Simulator of does not work in my laptop

  I have a problem: Simulator works does not in my laptop
  My laptop: HP elitebook 8460 p, core i5 2540, hard drive 500G, 4 GB ram, graphics intel hd 3000
  Status:
  Hyper-V... OK, free ram 2.5 G
  -Graphic support open GL 3

  Video:
  https://www.YouTube.com/watch?v=1DdrhGCkeVI

  Does show that as soon as it starts or what is done to access this screen.  What host operating system are you running?  You can try to re - install the Simulator?

• Simulator FMS does not work saying needed D3DRM.dll

  Original title: needed D3DRM.dll

  I installed a program, simulater FMS, which must have D3DRM.dll installed in order to operate. I am using Windows 7 and have service pack 1 installed also I Direct X 11 also I thought they contained that file dll but I cant find it.  How to get it and put it in the program?  Thanks in advance... highvolts

  Thank you Manu, in response to questions 3:

  1. it is not a Microsoft Simulator, is a FMS
  2. He never worked on my computer because he needed the D3DRM.dll file in order to operate.
  3. the recent change of software added this simulator on my computer.
  Thank you for your answer, but since I downloaded the file from the FMS web site and installed in the simulation software, which now works fine, I won't need extra help.  Thank you again for your quick response... Michael

• Wacom Art Pen barrel rotation does not work

  Guys,

  I am under Photoshop CS3. I recently got a Wacom Cintiq 22HD touch with a Pen Art. The Art Pen meant to give me this 6th rotation (rotation of Cannon). But when I tried, it does not turn one of my custom brushes.

  Do you guys know what happens?

  Thank you.

  Shaun

  im not sure 100%... but I think you need version cs6 or newer.

• Simulator of does not work :(

  Hello guys.

  I'm so confused at this moment I want to jump off a bridge! If it is not development Winddows 8 store that gives me grey hair, it is the development of Blackberry...

  in any case, I have Java plugin, BlackBerry 2.0.0 for Eclipse Indigo on my machine and downloaded the Blackberry 6.0.0.723 Simulator (9300). I installed the Simulator and see all Blackberry stuff on my computer. The Simulator works on its own, but when I try to run my application through it - the system throws an error indicating that the jvm.dll file is not found. He's here. I even went up to copy the jvm.dll in System32 file and use Regsvr32 to register.

  Still nothing works

  My application is done, and I'd love to watch it just at least once before submitting an application riddled with bugs in the world of Blackberry.

  What should I do?

  I uninstalled and reinstalled the Simulator 5 times today (and millions of other times last week) and nothing.

  Any help would be appreciated.

  I'm glad you are looking for!

  I'm not going to be a lot of help, but one thought more.

  You say that you have installed the Simulator for all users - in which case I don't think it is and must be in

  C:\Users\Hannesthegreat\...

  I suggest you install in a specific directory, ensuring that there are no spaces in the directory string and see if that helps.

• GPS location works Simulator, but does not work in the device

  Hi all,

  I have problem with GPS location.

  I have the button through which I can get the latitude and longitude in Simulator via LocationProvider class.

  His work very well in the Simulator, but giving is not the result in the unit.

  I use Storm 9530 devices and curve 8830.

  Thank you

  Valter

  Thanks for your support,

  Finally, I found my location.

  The steps are:

  As a first step BBDeveloper mentioned

  Options of-> advanced-> GPS Options

  Now,.

  Start the application maps

  Select Menu-> start the GPS Navigation

  or

  Find the location-> where I am

  It will activate the GPS.

  Thank you and best regards,

  Valter

• Solved: Webservice Playbook call does not work

  I developed an application Webworks, loosely based on the thread "how I would call a Webservice" and it works very well in the development environment, great in a Blackberry Torch, which is great in the playbook Simulator, but does not work when it is deployed Live from a playbook.  The compilation seems fine.  Find the looks to deploy, the bar is signed without error.  Life should be good!

  The web service is sitting on a server in-house, available on our company intranet, but not the internet.  We use BES.  When I fill the Playbook, I can use the browser open to see the webservice.  The torch, which I'm thrilled to the can run the application very well.  When I run the application on the playbook, however, I get nothing.

  Y at - it an option of setting or configuration I need to use to make this work?  I think that if it works in the Simulator, and if I can get to the site via the browser open, I'd be OK.

  Any help would be greatly appreciated!

  UPDATE: Stipid programmer thing... I had to adjust the white list.  For some reason, the Simulator did not care, but the real instrument don't!

  Yes, adding the item fixed the problem.

  It is a web service that is hosted on an internal server.  The server IP address is 10.x.x.x, so it is not reachable from the internet.  We do not currently have VPN.  I did some checking, and it seems that it is able to reach the server via WiFi.  I had assumed that he was using the bridge.

  It is unfortunate that the WiFi is the only option, because as soon as I leave the building, I have more access to my internal data stores.  It is good to hear that it's something that you're talking, but dissappointing is not available yet.

  Thank you.

• Portege M200: Rotation utility does not work with the new driver

  Hello

  I have a Portege M200 with the Gforce 5200Go. Since the last officially available graphics driver is the 46,44 I changed the 93.71 and installed. But the Rotation Utility does not work with this driver.

  When I use the driver nv for the rotation of the screen the tabletpen's is more synchronized: move the tabletpen left results in movement of the mouse to the top etc.

  Anyone any ideas?

  Hello

  You must use the page of the Toshiba driver graphics driver and not the original on the graphics card manufacturing site

• Tecra M7: ESC/Rotation button does not work

  There is "ESC" key on the screen of the control panel (lower left corner). The other function of the button is to turn the screen if you hold for more than 1 sec (depending on the image and the manual).

  This should be handy in tablet mode. Unfortunately, the rotation function does not work for me. The button itself works because flight' does what it says. I don't mean to redefine 'escape' to 'spin', but there is not even this option.

  Someone has / had similar problem?

  Hello

  This ESC/Rotation button works in the same way as the ESC key when struck or changes the orientation of the screen when pressed for more then second. That s right!

  Have you read the additional information in the user manual? I found some nice info in succession the orientation of the screen section.
  You can change the orientation of the screen on three different ways and one in this way is the use of the key ESC/Rotation!

  When Toshiba Rotation utility and Toshiba accelerometer utilities are run, the changes in the orientation of the top and bottom of the screen is automatically recognized by pressing ESC/Rotation for more than a second.

  So remember that the two utilities are run correctly!

  Best regards

• I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  I just dug my copy of train simulator, and it does not work on Windows 7 64-bit. Ideas please

  Thank you very much for all your suggestions. "Iwent with."

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs may not be able to run in Windows 7.

  and it worked.

  did anyone tried the version updated? I read some rather disappointing reveiws.

  Once again my kind thanks for all your suggestions

• Microsoft sidewinder gamepad 2 does not work on the Combat Flight Simulator WW11 and Europe series

  Original title: I have the Combat Flight Simulator WW11 and Europe series. My microsoft sidewinder gamepad 2 does not work on my XP and my Windows 7 computer. The joystick works on CFS2 Pacific. Help, please.

  I have a HP Pavilion p6717c with a radion HD 6900 graphics card. With windows 7 home

  Hello

  1. don't you make changes to the computer until the problem occurred?

  2. you get any error message?

  I suggest you to see link below and check if it helps.

  You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer: http://support.microsoft.com/kb/294672

  How to fix game controllers in Microsoft games: http://support.microsoft.com/kb/831361

  Items of Combat Flight Simulator: http://support.microsoft.com/combatflightsimfaq

  Also I suggest you to send your request in the below link.

  http://www.Microsoft.com/games/en-us/community/pages/forums.aspx

  Hope this information is useful.