10 32-bit Windows uses only 3 GB of RAM, despite a higher setting in VMware

Similar Questions

• Hi, when I connect to my Wired XBOX 360 controller to my PC the guide button flashes once and there is no answer. I use 32 bit Windows 7, Dual core 2 GB Ram DDR2

  Hi, when I connect to my Wired XBOX 360 controller to my PC the guide button flashes once and there is no answer. I use 32 bit Windows 7, Dual core 2 GB Ram DDR2

  Hi JamBoard,

  It is possible, that you need to install the drivers for the controller.  You can get them from here:

  http://www.Microsoft.com/hardware/en-us/p/Xbox-360-controller-for-Windows#support

  However, if it's not too hot, it could be a real hardware problem.

  Thank you!

• After Effects using only 1% of the RAM

  Dear Adobe,

  My after effects uses only 1% of my ram 32 GB can I know how to increase this, I allocated 8 GB for other application

  Why my application showing.

  Please inform as soon as possible.

  Kind regards

  Knani

  

  

  Perhaps because it doesn't do anything?   When he starts using 32gigs of RAM to display the 'about' dialog that is at this time, you should start to worry.

• SpeedGrade CC 2014.2 build 8.2x51 reading smoothing / jerky 4K with GPU R9 295 x 2 - it uses only 2 GB of RAM (8.1 Windows 64-bit), Mac OS - same problem

  Hello, guys

  I have following configuration:

  I7-5960 x 4.3 GHz

  32 GB DDR4 RAM

  ATI 295 x 2 8 GB (Gpusniffer.exe watch 3072 MB on each unit of Hawaii)

  Samsung XP941 Ultra M.2 (> 1000 Mb/s)

  Some 850 Pro SSD for H.264 4 k source

  Latest version of Speedgrade CC 16/02/2015 (DUAL MONITOR SETUP - 2560 x 1440 for Interface and 4096 x 2160 for previewing)

  I work with a lot of short 10-15 seconds 4 K 4096 x 2160 24 fps H.264 clips of Panasonic GH4. Import their first CC as some stabilization warp, cut them, save the project and opened in Speedgrade CC all are fantastic smooth in first CC.

  Speedgrade - a simple color - exhibition, some keyframes and simple scoring correction for certain substances. I use the GPU acceleration for sure have lots of 4096 x 2160 4K 24 fps. But it is not flexible and smooth after that a correction is applied. Everything is jerky and freezes the first seconds, when I press 'PLAY'. I used resources, the Manager monitor tasks (Winodws 8.1 64-bit) and Afterburner. And there's what I discovered:

  • Afterburner shows the use of mono-GPU (as we know it for playback only 1 GPU used) the same amount as in first. SpeedGrade CC use 2, 5 GB of VRAM. Also, if I use one zero effect - accelerating gpu, like "transform", for example, imported first, I get "not enough GPU resources" message in Speedgrade. Afterburner shows, CC Speedgrade tried to use more, and then Max 3GB available VRAM during that time. So I turn off these effects, before you open a project in Speedgrade.
  • CPU is low (15%) use, perhaps a little lower, then in the first CC
  • Disc - 3-10%, H.264 is weak on this subject
  • RAM! -is the problem. I have been authorized to use the 29 GB of RAM for Adobe apps. Speedgrade CC use no more then 2-3 GB according to the the Task Manager (for most 2 GB) and 8.1 Windows resource monitor 64-bit Pro. After I finished with the color correction, a project open in first DC, work with lumteri on smooth and! First CC use 9 to 10 GB of RAM to play the same music video in full resolution smoothly!

  
  

  I already reinstalled everything, including drivers for the GPU, 8.1 for Windows and Adobe CC even result.

  MacBook Pro 15 retina end 2013 with i7-4960HQ/16 GB of RAM/Geforce 750 m UPDATE!

  Under Mac Os Yosemite 10.10.2 - same situation here. First CC use 5 GB (of 11 GB of available) 4096 x 2160 Prores 422 HQ and is usable, smooth with a few drops of frame.

  SpeedGrade CC uses 2.5 GB RAM of 4096 x 2160 and it is impossible to use plenty of 4096 x 2160. Only 1/2 resolution of overview is smooth and usable on the screen of the laptop. 4096 x 2160 externally connected through Thunderbolt monitor, it's a lot rougher, I think it's hard for 750 m with 2 GB of VRAM.

  UPDATE! Previous version (CC 2014) of first CC and CC Speedgrade Windows 8.1 64-bit - even situation.

  
  

  What do you think?

  
  

  My opinion - Speedgrade CC is not optimized for 4K resolution. First CC is good for 4K.

  BTW, for more information, latest AMD catalyst driver 14.12 omega has a problem with my R9 295 x 2 and engine reading Mercury (MPE) OpenCL - just black with sound screen, when I turn on the GPU acceleration. So I use the previous version of 14.9. With 14.12 GPUsniffer.exe found a device with 4 GB of VRAM GPU and a GPU with 3 GB of VRAM (normally obligatorily 3 + 3 GB 295 x 2 Dual GPU radeon chip).

  Yes

  So, finally, Speedgrade CC works 95% smooth time with 4096 * 2160 H.264. But it was necessary to turn off all effects in first Pro CC. Nothing new. I found a few discussions on this fact, but after that I spent some time with experiences.

  Stabilizer Warp even alone is enough to make Speedgrade CC really agitated. 'Transform' effect simply blocks Speedgrade CC with "GPU resources.

  Each effect uses some VRAM (for Warp stabilizer 200-300 MB). After you have disabled all effects had load VRAM under/near 2 GB for the little clip 4096 * 2160.

  First CC flies simply with unique x 290 or 295 x 2 (which is the only x 290 during playback). Even 3GB VRAM available software Adobe CC.

  PS Macbook Pro retina 15 "with Geforce 750 M 2 GB VRAM would work smoothly with Prores to half a preview/playback resolution - 2048 * 1080. CC CC SpeedGrade or Premiere Pro with 1/2.

• Windows 7 on Netbook Dell - memory-2 GB (1 GB usable) - why should I use only 1 GB of RAM? How can I make all 2 GB usable?

  I have a Dell Inspiron Mini 10v Netbook. It came with 1 GB of RAM and Windows 7 starter. Took me to upgrade to Windows 7 Ultimate and it's much better. Given that the memory was only 1 GB I installed a 2GB chip instead. The BIOS of the computer/is happy with it, but Windows 7 will use only 1 GB of it.

  Resource monitor scored the extra 1 GB has "reserved equipment." They have no reserved before the addition of the extra RAM.
  I want to use all my memory! Help!

  Hi pcstan

  I would like to know what version of the operating system are you using? It is 32-bit or 64-bit?
  You can try the following methods: -.
  1. change setting memory remapping in BIOS. This setting can have different names, look at the motherboard or computer manual.
  2. run msconfig.exe. Under Startup go to advanced options and change your maximum memory available.
  This can help you
  Concerning

  Vipul Taneja. http://www.vipultaneja.com

• Satellite A200-21dts: 64-bit Windows recognizes only 3 GB instead of 4 GB of RAM

  Hello!

  I have an A200 21 T with windows 7 (ultimate * 64) install.
  My problem is that windows takes only 3 GB! How to 'use' the ram?

  Hello

  Please, read here:

  http://APS2.toshiba-tro.de/KB0/TSB82022E0000R01.htm

  As an addition:

  Go safety start-Control Panel of configuration-system-configuration-boot system Administrative Tools - Advanced options
  Make sure the maximum memory of the option is not checked. If it is checked, uncheck, press on apply, Ok and restart.

• T500 running Vista Business 32-bit SP1 uses only 2.5 GB to 4 GB of RAM available

  People

  Computer > Properties dialog box has 4 GB of RAM (and then I saw two 2 GB cards in my opinion) but the physical memory Task Manager reports only 2.5 GB (2519 MB to be exact).

  Any ideas?

  Concerning

  Simon

  PS Ce is just one of 10 other problems with this new T500.

  32 bit OS sees about 3 GB of ram, regardless of how much you have physically installed. In addition your ATI GPU use hypermemory preallocated himself up to 0.5 GB of ram for use of vram.

  The only cure for your dilemma is to get a 64 bit OS.

• I want to install 64-bit Windows using the recovery procedure

  I brought a L series today and I just turn it on.

  I need help to set up 64-bit windows. I chose 64-bit but on the next screen, it says factory default software for recovering or erase the hard drive, including all data and were leaving.

  Which one to choose?

  The first, of course.
  You want to have recovery settings (factory).

• Satellite Pro A60 - Windows XP shows / use only a part of RAM available

  Hello guys!

  I am facing strange problems with one of my two A60s. I just upgraded two of them with 1024 MB of RAM the same. One works perfectly, but the other will show me only 410 MBs in Windows. The BIOS indicates the correct size. I changed the RAM from one to the other, but this strange error is always present. The version of the BIOS has been updated to 1.90 and has Windows XP SP2.

  Do you have any suggestions or ideas? Is there an easy way to put the management of RAM in Windows?

  Thank you in advance!

  Ralf

  It s very strange.
  I found that an additional Satellite Pro A60 info has been delivered with a different hardware configuration.
  Some A60 Pro comes with an internal memory of 512 MB and others with only 256 MB internal memory.
  In addition, the internal memory modules cannot be deleted and there is only one slot for memory upgrade.

  But I put t know why the OS shows only 410 MB

  Oh, I forgot to mention that the graphics card, also use the part of the main memory and, therefore, the operating system of shared memory could indicates a value of different memory.

• Win7 64 bit & Tecra A6 - only 2.99 GB RAM is shown as usable

  Right, I have installed Windows 7 64 bit on my Tecra A6 and most seem OK.

  I have a request and here I have 4 GB memory installed and Windows indicates 4 GB in system properties. However, it's showing only 2.99 GB as usable.
  I thought that the 64-bit versions could use more than that! Or, what I need to do something like a bios upgrade?

  Shaun

  Hello

  Toshiba technical support:

  * There are several conditions to use all 4 GB memory on a laptop computer that has 4 GB of memory installed *.

  The chipset must support 8 GB of address space.
  Intel PM965 and GM965 chipsets and newer or AMD64 CPU could process up to 8 GB.
  for example, the family of chipsets Intel 945 endured only upwards of 4 GB address space.

  The CPU must support instruction set 64 - bit mode (Intel? EM64T or AMD64).
  For Intel CPU, it could be checked on the Intel Web site: http://processorfinder.intel.com/

  The BIOS must support the memory remapping feature.
  The newer BIOS versions are supporting this feature.

  A 64 bit version of the Windows operating system. Note: All the above mentioned conditions must be met to use all 4 GB memory on a laptop.

  Your laptop motherboard supports up to 4 GB, Windows 64-bit installed. Perhaps, you must update the Bios.

  And 1 thing, in the configuration of the system (administration tools), go to start, click on advanced, uncheck (if indicated) maximum memory

• operating system uses only not 4 GB ram

  I have Windows XP Professional installed on my pc, my bios says I have 4 GB or memory installed and usable. Where as my when I get into the operating system itself it only said that I have 2.0 GB used. My bios is up to date, I have other PCs that allow all of the 4 GB be used on the operating system, so I'm not sure why this one gives me the penalty.  Any ideas that would help?

  -asus a8n32-sli mobo
  -4 GB of ram ddr pc3200 400 MHz
  -geforce 8500 gt graphics card
  -amd 64 3800 +.

  Hello

  1. which version of the service pack is installed on your computer?

  2. don't you make changes to the computer until the problem occurred?

  The RAM reported by the System Properties dialog box and the system information tool is less than expected in Windows Vista or in Windows XP Service Pack 2 or later: http://support.microsoft.com/kb/888137/en-us

  Hope this information is useful.

• NB100 - OS uses only 500 MB of RAM - 1 GB memory total

  I spent the NB100 to 1 GB memory, but I have seen that the OS never exceeds 500 MB despite the use of many resources.
  The CPU very quickly gets to 100% and work becomes very slow.
  On my other computers open the same amount of firefox windows are for example the memory usage much more.
  I think there are some limits to memory max usage in applications and I wanted to ask you if there is a way to combat it.

  Another problem is that the system monitor display completely different values than the high command and I was wondering what is the right. I downloaded several other system monitors and all gave them the same results as the system monitor. Contrary to what I wrote above, the top shows a nearly 100% memory usage, but him amount by the application has not changed (again below 500 MB). I wonder where the other 500 MB above, referring to the.

  Thank you
  Tomer

  Where do you read the memory usage?

  In the task-> Commit Charge Manager?

• CS 5.5 uses only 22% of my ram, but 100% of the CPU

  Hello

  I wonder why the ram usage is so low compared to the CPU in AE cs 5.5? I check the stats background when rendering that happens and it is said that 22% of my ram is used. Even to the end, only 22%.

  That being said, people here are recommending tons of ram, such as 32 GB +, but why? If this is the case? Maybe my computer needs more complex effects such as the production of grain?

  Thank you!

  The number reported at the bottom of the request for use of the RAM is only the amount used by the foreground application. It has nothing to do with how much is used by the instance of After Effects context or assistance process.

• 4 GB RAM only 3.46 GB RAM usable 8 64-bit Windows

  Hi, I have a laptop of 64-bit windows 8 with 4 GB of ram but my system has only 3.46 GB usable. At the moment I have 2 GB of ram in my laptop because I make more and now it says I have only 1.46 GB of usable ram. Any help?

  CBD

  Others Go 0.54 is normal and probably shared video RAM.  I suspect that you are not interpret correctly because they are different from those of win 7 or before.

  You can have 1.46 usable but perhaps up to half of the fast cache ram anticipating your actions.

  If you are looking for this because you feel that your machine is slow is not the problem.

• What is the diff between a 32 and 64 bit, Windows version.

  Original title: is win 7 has also a 32 and 64 bit...

  1. What is the diff between a 32 and 64 bit, Windows version.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...

  3 - is the application and games from 32-bit to 64-bit media...

  1. What is the diff between a 32 and 64 bit, Windows version.
  32-bit Windows uses 32-bit programs. 64-bit Windows uses 32 and 64-bit programs.

  2.i have a computer laptop 64 bit. so I install win 7 32 bit...
  Only if you opt for a multiboot configuration.

  3 - is the application and games from 32-bit to 64-bit media...
  Yes.