10.6.8 Mac crashed, does not now recognize LaserJet 2600n
My office iMac crashed. (!!) The data has been retrieved and the disc repaired & reformatted. Then the data has been moved.
I was installing software original & so far, everything is well except that I have a problem with the HP Laserjet 2600n printer.
I used the installation program that was on the original disc and received the message "Successful Installation". Then I tried to print something, but the 2600n is not being found by any software.
There are 2 HP folders in the folder utilities: "Hewlett-Packard" and "Configuration of the HP EWS device" - but the last modification in 2010 and seem to be a scanner. No devices are evidence in the HP Device Configuration or uninstall anyway. Otherwise, I find no HP folder.
So what to do now? (There is a firmware to http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=446154&p.... What is a driver? Should I download it?)
It is a FW update for your printer. Print a configuration page and see what FW datecode is on it. If this corresponds to one located on hp.com then you already have the FW update. If it does not, then you need to update. It is one of the reasons that the Mac isn't the 2600n printing.
Another suggestion would be to use the .dmg file that is posted on hp.com for this printer instead of the Conference on disarmament.
This is the page for this printer:
Tags: HP Printers
Similar Questions
-
I tried to update OSX 10.5.6 to leopard 10.6.3 and was not working due to a disk error but now my mac book does not, as the starting system, but after a few secons it will turn off itself, what should I do? Thank you very much!
You probably should have updated to 10.5.8 first.
Installation or update of Snow Leopard:
http://manuals.info.Apple.com/en_US/Snow_Leopard_Installation_Instructions.PDF
-
my mac book does not light and I get three beeps while it tries to start
my mac book does not light and I get three beeps while it tries to start
Three beeps is almost always a problem of memory RAM.
-
Until I upgraded to Windowsw 7, Firefox used to take me directly to my Yahoo site. Why he does not now? I used to really love Firefox, but I'm completely frustrated just trying to get the answer to this question. Maybe I should just ask, "How do we uninstall it? But I would like to be able to use Firefox like I did before. Thank you
[email protected]Hi peggkel,
You say that you just want to change your homepage to Yahoo? Do not worry, it is quite easy! You should take a look at the Knowledge Base How to set the home pagearticle.
If this does not work, you should look at article unsaved Preferences.
Hope this helps!
-
new music from iTunes is easily downloaded from our iPhones on our macs, but does not appear on our computers portable regular windows. What can we do?
Activate the automatic downloads. Download your past - purchases of Apple Support.
TT2
-
Widget does not now with the new Muse update from today
Hello!
My widget I bought MuseGrid "Lite and iFrame generator of widgets.
Does not now with the new Muse update from today?
So what to do?
Many widgets from third party that reached deep into the code generated by Muse may not work with the changes that were necessary for the delicate design. You will need to contact the source of the widget for more information about an update of the widget version.
-
I upgraded my Mac and does not contain a disk drive. I have creative cloud 5 on my old computer and I want to put it on my new computer. How can I do this?
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a link to access a page to download the Adobe programs if you do not have a disk or drive
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
- and also read https://forums.adobe.com/thread/1146459
-
I need to install my suite creative adobe on a new MAC, which does not CD.
Clues
- Is the serial number of your CS6 for Windows or Mac? If Windows, then you need to apply for a swap of platform get a Mac for CS6 serial number.
- If you already have a Mac CS6 serial number then download CS6 of
http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html
-
My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
In addition,
When you insert a CD or a DVD, Windows Vista may not recognize the disc
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
Change of privilege HD now Mac Mail does not open
Couple of questions, self-inflicted:
I changed the privilege HD read-only for everyone no access and then click on "apply to the included items. I released on bail after a few minutes, change my mind with a reboot. I now get the re-boot, the pop-up "library should be rebuilt to open applications. I keep having to enter my PW for this.
In addition, Mac Mail now does not open. It is a big problem and I don't know where to start.
I repair permissions. Is there an easy way to return to the previous default permissions and privilege by default to make things work as they were before?
Can you make a different Get Info and change everyone else read-only?
First try and see if that fixes the Mail. If this is not the case, here are a few ideas more troubleshooting.
Try a reboot.
Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.
Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.
Isolate a problem by using a different user account
If the problem is still there, try to start safe mode using your usual account. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.
-
I'm going crazy trying to find an answer to this question! My external hard drive has shown in the past but not now shows in disk utility. My OS is X El Capitan.
I tried to turn off my computer then unplug my external hard drive waiting for 30 seconds back on my computer and plug my hard drive with no joy.
I hope someone can help.
Hi willy of San Jacinto.
I understand that your external hard drive is no longer seen by your computer. I know it's important to have a good backup location, and for that to work, I am so happy to provide assistance with this.
Read this article on troubleshooting USB devices:
OS X El Capitan: If a USB device does not work
If your computer is yet to see the hard drive after following these steps, it would be interesting to test this drive on another computer if available. If you continue to have problems, I suggest contacting the manufacturer of the hard disk on a hardware failure possible.
Thank you for using communities of Apple Support, cheers!
-
I was power off update of Firefox for a while because I knew some of my modules aren't compatible yet, and the main reason I use firefox is because of the multitude of modules. Finally today I decided to go and let it install. As soon as he returns to the top, it's completely different from the way I had my firefox. The buttons are all moved around, each tab has two Xs to close with the back button does not work, there is no way to scroll more tags do not take on the screen and for some reason the firefox button is not collapse in the main beam.
My session has not been restored, either, which really annoyed me, because I had a very high volume of open tabs. Right now I just want to come back, because I hate what happened, but I know that's not possible.
I'm sorry to hear that you have so many questions. What version of Firefox you used before?
The problem of double title bar has been identified as a problem with the extension of the tax Mix Plus but it does not affect everyone, there is an interaction with something else (not exactly what clear although Norton Toolbar has been mentioned in a thread).
There is a new version available that you can try. If Firefox is stable enough to do...
Firefox orange (or the Tools menu) button > Add ons > ' gear' icon > check updates
If your beta version does not update, you can try to install from the Add-ons site.
More generally, can I suggest disabling the extensions as much as you can live without for 24 hours and gradually reactivate? This should help isolate the interactions between them. As you know, you can do so here:
Firefox orange (or the Tools menu) button > addons > Extensions category
Finally, about your old session, if you have not closed Firefox, you could find a sessionstore.bak file in your profile folder that contains your old session. For easy access to this file, try
Help > troubleshooting information > "view file" button.
Grab a copy of this file and save it somewhere outside the folder because it is overwritten when you close Firefox. Had to run, but if find you one with a suitable date, a person can help you to restore.
-
Safari for Mac OS does not load certain pages
After upgrading to Mac OS on my Mac Mini (end of 2011), everything seems to work properly. I rebooted the Mini just to be on the safe side. Everything went well. It was Tuesday night.
Thursday morning, the first opportunity, I get to mess with it, I opened Safari, try to connect to my router Asus RT-N66U (with the latest firmware), but somehow Safari doesn't seem to like https, nor does it like .asp pages. Here is a screenshot of what's on my Mac Mini Safari:
I then decided to download Google Chrome. I installed (never had on this Mac Mini), but the page works perfectly and quickly.
I have reset everything I could on Safari, including clear them cache, clear history, tried the developer mode (no matter WHICH mode in there still gives the same results)... on the cable connections and wireless. Chrome works without a hitch, as Safari before Tuesday. Now, nothing...
... However some pages such as Google.com or Apple.com loading properly. I haven't checked if there are applets missing in the back or a dark rendering problem.
Any ideas how to solve this problem? (I'll use Chrome until it is.)
-
How to repair Mac Pro does not start
MY Mac Pro when they start up Logo right, Apple may see
Hi jorge, this is a topic of Apple Support on what to do if your Mac does not illuminate.
https://support.Apple.com/en-us/HT204267
If you have another Mac, you can try to boot in target disk Mode and make a backup of your files.
Share files between two computers with target - Apple Support disk mode
Then you can try following the advice of this user tip
.. Step by step to fix your Mac
Another possibility is trying to boot now the command option + keys r to your recovery volume. If it works, re - install OS X on the internet. https://support.Apple.com/en-us/HT201314
Maybe you are looking for
-
Is it possible to prevent the right click context menu of the combination of Stop/Reload?
Is it possible (subject: config tweak or something) to prevent the context menu of the combination of Stop/Reload? Screenshot of what I mean: http://picsend.net/images/873089StupidReloadSto.png
-
GPIB hangs - no way to disable it programmatically?
I have a test configuration with power, scope of tek, generator functions of agilent agilent and agilent multimeter, everything on gpib. I have the usb interface. My pc is xp, my program is c, very simple. It emits just ibwrt and ibread. It extends o
-
some emails go directly to the folder of the deleted items and not inbox
some emails directly go into the deleted items folder and never appear in the Inbox. This from an express friends outlook program. I have and use mail and Vista Edition windows Home premium
-
try to put a movie in windows movie maker
I made movies in movie maker before, but always with .jpg images. now I would like to add a video from my camera, but when we download on the computer, it downloads as a. MOV file, which cannot be open in apple QuickTime. How to convert the. MOV fil
-
I do not know what causes this error but I recently installed Norton Antivirus 2010 and received this message since then.