10 and windows vista OS

Hello, I have recently taken a hard drive on a computer running windows 10 and have plugged into another computer running windows vista in addition to the hard drive already there, so I wanted to know if its possible to run both on different hard drives? Thank you!

It may be legally against the terms of the license to transplant like that, depending on how you acquired or purchased Windows, it can only be allowed to use on the original computer.

However technically speaking, you can put the two drives on the same computer and when you turn on the computer just press any button it uses to stop booting (you can see a message like "Press F6 now for boot device" for example).  This is the way you choose use this disk to boot from a Windows Vista-based computer, like yours on a legacy BIOS as the genre.  So, the short answer is to check the manual and see what key must be pressed during startup order to boot from.

Tags: Windows

Similar Questions

  • Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system?

    Firefox 4.0 is now compatible with the browser ZoneAlarm 1.5.260.0 and Windows Vista Home Premium, 64-bit Service Pack 2 system? Earlier when checking for updates it had compatibility problems. These issues have been resolved for me operation secure with Firefox 4.0?

    According to the guru on the ZoneAlarm user forum, Firefox 4 and other new browsers won't be compatible with the new version of ZoneAlarm, releasing. See:

    "You must update the following plugin:

    • Adobe PDF plugin for Firefox and Netscape 8.2.6
    1. Check your plugin versions on one of the following links:

    2. Update of Adobe Reader (PDF plugin):
      • Within your existing Adobe (If you have already installed) drive:

        • Open the Adobe Reader program in your list of programs
        • Click Help > check for updates
        • Follow the instructions to update
        • If this method works for you, go to the section "download full installer ' below and go to"after the installation"below
      • Download the full installer (If you have NOT installed Adobe Reader):
      • After installation, launch Firefox and recheck your version.
  • Manually download the update for Windows Server 2008 and Windows Vista platform

    Where can I manually download and install Update for Windows Server 2008 and Windows Vista platform?

    I have a machine that requires this update for installation of PowerPivot for Excel 2010, but the Windows updates are usually hunted in the world by our headquarters and I can not run it manually.

    Platform for Windows Server 2008 and Windows Vista updates are only available via Windows Update (or WSUS, in your case). Contact your IT Department. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Problem to create the Internet connection sharing between Windows XP and Windows Vista.

    Original title: Internet connection sharing between Windows XP and Windows Vista.

    Hello

    Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

    Thank you

    FG-man

    I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

    Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

    If you go this route, you need to set a static ip address for the office,

    Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

    Hope that this helped good luck

  • Avira Antivir is compatible with Windows 7 and Windows Vista?

    Avira Antivir is compatible with Windows 7 and Windows Vista? I have ECS MOTHER card and 1 GB of DDR2 Ram, 160 Gb HDD.

    I have not tried on Windows 7 yet, but yes, it is certainly compatible with Vista. Steve Hebert - MVP Microsoft Internet Explorer

  • I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

    I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

    Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

    Virtual private networks have little to do with the domains or working groups.

    I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

    In my opinion, the best way to share a printer is to use a printer connected to the network

  • I have avg free 2011 and windows vista - do I need a firewall or I have a?

    original title: firewall

    Hello

    I have avg free 2011 and windows vista - do I need a firewall or I have a?

    If I need a free Zone Alarm would be correct?

    Thank you

    Chris

    Windows comes with a cleverly named Windows Firewall Firewall and AVG has its own firewall, I'm pretty sure. If you are fine as is.

  • Windows 7 and Windows Vista

    I'm trying to understand the differences in security of Windows 7 and Windows Vista. I am also generally try to understand how Windows 7 is Vista. If anyone has any information they can give me, I would appreicate it.

    At a deep level, Windows 7 is almost identical to Windows Vista, but with minor tuning and adjustments.  You can see how they are in the version numbers:

    Windows Vista is 6.0 internally

    Windows 7 is 6.1 internally (just a tiny 0.1 updated)

    As an example of the update minor: both use UAC, but Windows 7 student autonomous tasks the most initiated by UI so you don't have to confirm as often.

    This forum is for home consumers, to talk further about the security, you can visit our forums for it professionals to http://forums.technet.microsoft.com.

  • Resource monitor shows Windows 7 and Windows Vista running different programs

    I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

    This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

    http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

  • Blue Screen Driver IRQL blue screen of death Windows 7 Ultimate edition and Windows Vista

    original title: BSOD Driver IRQL blue screen of death Windows 7 ultimate and Windows Vista

    I get the BSOD, and they are different every time.

    I had originally Windows Vista on my pc (HP m8300f) and it worked fine for 3 years until last month, I started to have these BSOD.

    So I thought a new clean install of Windows 7 Ultimate would solve the problem. Well, I was very happy to get the new operating system installed, but a few hours later that darn BSOD appeared and im now distraught.

    What is my RAM? My drivers? My hard drives?

    Computer IM but I'm certainly some type of technology. I have basic computer knowledge and that's all.

    You can download minidump files and find the information system here in this zip file http://www.sendspace.com/file/mfx420

    This issue is very very irritating and has ruined a lot of my work.

    Well up to now (18 hours) my computer has not had the BSOD and what I did is that I removed 1 GB of ram for my motherboard. Their were two sticks of 512 MB. I took them both. Now, I have 2 GB of ram running in my system and had not had a BSOD or an error after you have done this.

    What is the problem with my ram? I now have 2 sticks of RAM on my motherboard and both are 1 GB each stick. What is the mix n match that causes a problem all of a sudden? My computer came with this stock of installation. I also noticed the ram I got were the brand Samsung and the other on my motherboard are another brand.

    Well idk I hope it was my problem. We'll see.

  • during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

    during installation I get Lightroom and windows vista no error in charge, but im running windows 7? What should I do?

    I just had to go to the directory "Win Support files" and open the implementation file. Now it's working.

  • 5200 801 and Windows Vista

    I do not know how to test Windows Vista, let alone on a 5200-801 satellite, but I have some problems with the Toshiba Utilities. Including non of them work.

    The current problems, none of the function buttons work (IE monitor, shortened brightness wireless keyboard, display hotkey etc.)

    The buttons on the front panel for control of the media are not functional.

    The console does not allow the setting of the system (IE front backlight always on etc.) properties

    The SFP does not work as the Toshiba Synaptics driver is not compatible and later synaptics drivers will not work with the application of YPP.

    and most of the importantley, the suite of power management does not work and when you try to manually open you get a stateing error 'access to this program is restricted by group policy.

    Now admitted that she, most of them are minor problems, the only one I want to be fixed is the power manager, so I can control the monitor brightness again (it is set by default to mid level at the moment) but if anyone has a work around these issues (or better yet, plans to update following utilities toshiba I would like to know.

    Thanks in advance

    John Walker

    Hello

    As far as I know the Satellite 5200 is about 2 years old. At this time, all the tools and utilities are designed to operate correctly with delivered Windows Xp OS. As you know Windows vista for now is just a trial version and not the official market. It makes sense, than the old tools and uses can t work properly and is not a type of problem.

    I put t think that Toshiba will create any type of updates for older models.

  • Satellite Pro 6000 and Windows Vista

    I bought a Satellite Pro 6000 and I want to put Windows Vista on it. I did an Upgrade Advisor and I was told that this graphics card will not work. Is this true?

    Thanks, Nick

    I'm afraid that's true. Satellite Pro 6000 is old enough for laptop and it will not supported in Vista. Install Windows XP Home edition and enjoy your life.

  • Package of added value and Windows Vista 64-bit on Satellite P200

    Hello, recently I changed Windows version of 32-bit to 64-bit. Everything works perfectly except PPV.

    When I try to install it, it produces an error message that says:

    ID_ERR_NOTINSTALLTVALZ_MESSAGE

    I found in some old discussions that I should update my bios, so I downloaded most recent bios, and when I tried to update, the pop-up message that I already have this version.

    I did some research and I found some drivers for the 64-bit version - [link to driver | http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 746 & selSho rtMod = null & language = 13 & selOS = 27 & selType = all & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 61866 & DISO = 27 & driverLanguage = 13]
    and in the statement, he said that I should
    "It's only the driver of value added package for 64-bit computers. Installation instructions: 1. unzip the zip-> 2. Right-click on the "TVALZ_O.INI" file-> 3. After a right-click on the file, choose "Install" from the context menu. »
    But when I do that there is an error message that says that this INF file selected does not support this method of installation.
    I tried to install it in safe mode, but the error is the same.

    Maybe I should put these drivers in a specific location? If Yes, where?
    Who can I install everything first? VAP installation for 32 bit, then driver for 64-bit? Or maybe the other way around?

    If someone could write me a clear instruction how step by step, I would be really grateful.

    My system: Windows Vista 64-bit Ultimate with SP1
    My Notebook: P200 series

    Best regards, Paul of the Poland.

    Hmm, I wonder about this sentence
    > I've done some research and I found some drivers for the 64 bit version

    What is your laptop model number? Have you chosen the right Toshiba VAP for the right notebook series?

    If you have chosen the correct drivers (for the right notebook series) then try to copy the extracted files in the folder of Toshiba Value Package added to programs-> Toshiba-> Toshiba Value added Package.

    Then try to run the ini file as described on the page of the European driver Toshiba.

  • Tecra M5 and Windows Vista?

    We will be able to run windows vista on new Tecra M5?

    Hello

    Firstly, Windows vista is not official on the market, and the Toshiba doesn't support any beta version.
    In this case you can try to install your beta version, but there is no drivers for this operating system at this time. I read that Microsoft plans to release the Vista operating system in 2007.
    Well, you can try to install, but you will get all the drivers.
    I will also try to install a Beta version on another laptop, but he needs about 8 GB of HARD drive.

  • Satellite A300 - Help Support and Windows Vista does not work

    Hello

    I have a Satellite A300 that had Windows Vista Home Basic pre-installed.
    When I click on the Windows Vista Help and support help windows appear, but an error message box pops up that says page Web is no longer valid.
    The Help window opens blank with the mode circle cursor.

    How should I do?
    Thank you.

    When you open help and Support your laptop is connected to the Internet?
    If this is not the case, try to open it with an Internet connection.

Maybe you are looking for

  • Will download any new messages suddenly although I kinda

    Thunderbird has always worked until two days when all of a sudden, it downloads all new messages, even if she pretends to be downloding. I wait endlessly and nothing happens. When I check my real email from the server, in fact, there are new and impo

  • Question of Terctra A3x with battery

    Hey guys,. Recently, I reformatted my tosh and is went on the installation of al the pieces and parts but the battery has not been picked up correctly despite me install the chipset utility. I couldn't find any reference to the driver of the battery

  • How to access the Bios Menu in Ideapad u510?

    How do I enter menu of startup in lenovo u510? I tried all the options (Fn + F2, 12 + Fn, Fn + 10, ESC) also connected an external keyboard, but could not access it. Help, please!

  • Why is the thumbnail preview in the taskbar tasks not updated?

    I noticed when I hover over a minimized in the taskbar, window that the vignette does not update. For example, if I reduce the thumbnail Windows Media Player does not display the actual film that plays, instead it shows a still image.

  • get the 641 and 80070641 error code during the installation of Windows updates

    Original title : not able to have windows updates installed on the pc have vista and get code error 641 and 80070641 - what it means and how can I solve this problem please? Not able to install updates windows for my pc with the vista system. I keep