10 iOS and ios 10.0.2. Always give service problems.
Since ios 10.0.0 came out my phone started acting weird until I could update. Then the update made my telephone service say up to the search for a few weeks now. I have restored, downgraded, updated updated again iOS 10.0.2, reset all settings, reset settings network, restore, rebooted and even changed my sim card. My service is returned temporarily for an hour and that's all. Att says I should talk to a store of authorized local apple (not really apple) and also told me that there is nothing they can do. I was told that I should talk to someone at apple and see if it can be fixed or just replace my phone (which is not something I can afford right now).
Help, please
Hey there, c_thibeaux. Welcome to the communities of Apple Support!
It seems that your iPhone iOS 10.0.2 6 is looking for service and you are unable to connect to your AT & T business network. Have you tried a litany of troubleshooting steps, and I would suggest a more.
How to back up your iPhone, iPad and iPod touch --before troubleshooting a device, I always recommend a new backup to protect your personal information. It is preferable "to have" one to the 'need' to a backup.
Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - this step will completely erase hard drive and remaining needs through iTunes on a Mac or PC to your iPhone. The first time, select "set up as a new iPhone. Once you return to your home screen, you should be able to see if you connect to their service. If everything works as it should, use the "restore from backup" link in the section «Get help» If it is not, under the same article, "Contact Apple Support".
I hope this helps!
Tags: iPhone
Similar Questions
-
Cannot access Pathname you have the appropriate permissions. Cannot download updates gives error code 643 and error code 5. Always gives access denied. You do not have the appropriate permissions. I am the administrator. Change all the complete control. Any other suggestions? Possible virus?
Hello
You are unable to download the updates?
Try the following steps to resolve the problem:
Method 1: Temporarily disable any security (including firewalls) software and check if the problem persists.
Check out these links:
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-offhttp://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
If disabling the security software solves the problem, then contact the manufacturer of the specific security software to fix the problem.
Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable
your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are
connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.Method 2:
See the article mentioned below and run the Fixit diagnostic tool to fix the error 643.You receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates:
http://support.Microsoft.com/kb/958052
Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I bought two Lightroom... One for Mac and one for Windows but Mac gives me problem... it happened in judgment and now it won't open upwards - and how that I associate my Mac purchase at a monthly payment as my Windows plan? Its a plan of photography by Adobe (including lightroom and photoshop)
Hi Robertc70810949,
It is a digression of your technical question, but you haven't purchased two separate subscriptions for creative cloud? You are probably aware of this, but just in case you're not, a single Plan of creative photography cloud allows installation and activation on two computers. These computers can be two Macs, two windows, or one of each. See Adobe Creative Cloud FAQ for more information. Of course, you can have another reason to buy multiple subscriptions, but I wanted to clarify in case you can save yourself a little money.
Kind regards
Del
-
I m using windows 7 ultimate service pack 1
Restore the Type Associations by default Windows 7 file Extension:
http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.htmlChange the programs that Windows uses by default:
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
Open default programs by clicking the Start button, click default programs.
Associate a type of file or Protocol with a program / scroll down the list until you find
your (.xxx) file extension you want to associate with your application.There is also the Microsoft Fix it Solution Center
http://support.Microsoft.com/FixItAlso: Microsoft Fix it Solution Center
http://support.Microsoft.com/GP/cp_fixit_main/en-us#TAB8In the list on the left, click on the "Windows" tab and then on the right road to the bottom of the list until see you if your problem is listed.
J W Stuart: http://www.pagestart.com
-
My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space
Hello
You want to know is explained here: https://www.apple.com/support/iphone/backup/
If you want to delete the backups that are currently clogging up your iCloud-storage space, use this: iCloud: delete a backup device iOS to iCloud
-
Is IOS 9.3.2 update cause any problem on my phone?
Is IOS 9.3.2 update cause any problem on my phone?
What are all the specs is added to this update.
My phone looked up crash when you receive an incoming call. This happens twice in the day.
Can you please send back with your answer to all these questions.
No problem causes update for devices, updates are made to overcome bugs and Yes, it is good to update your device to the latest version.
The specifications are bug fixes and improves the security of your iphone.
After updating your device works very well, otherwise ping - me and clarify the problem.
-
Equium A20 fell and the screen turns off always
Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.
I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand
Anyone with the solution?
Thanks in advance...
Hello
> but as soon as windows load screen is black. I can t understand
This means that the display output has accidentally changed to an external.Have you checked if something would be visible on the second external monitor?
Select this check box.In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.
-
My phone has a gray spot and he goes but he always comes back and my phone is bulging commandeLorsque I try to push to vertical lines appear so I can't push
Is that an iPhone 5? If so, you may have a battery of swelling which pushes the screen and that may have caused damage to the screen.
-
problem iPhone 5s load is reduced to
My iPhone 5 s a problem that the accusation itself decreases without using the phone, I changed the battery it is always the same and I put it in airplane mode it's always the same problem how to solve this help please?
Please help me anyone
-
An Application incompatible mobile partners and detected but does not always
Acknowledge troubleshooting see the report are fix the incompatible program-Mobile Partner (broadband pilot-Huawei E1552) but still does not resolve the application respective icon still showed her suffer from inconsistent failure. Please help. TQVM
Hello
1. what operating system do you use?
2. what exactly do you mean by ' Application Incompatible mobile partners and detected but does not always '?
3. What is the exact problem you are facing the computer?
Provide more information on the issue to you help again.
You can also visit the link of the article of Microsoft that will guide you on how to ask questions below.
Suggestions for a question on the help forums
-
I'm trying to get my spell checker in Windows Vista to work, but it does not check my work. I put several spelled words and it always gives me a "Spell Check Complete" message
It can cause that. Their our dew case, where you can smell bad words and spell check don't pick them up. It wood help if their was also a check for two grammar...
Just an example... :-) Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/
-
My watermark came before I did the recent update on CC 2015, always when I would export to PhotoShelter. Now, the watermark does not appear. I asked PhotoShelter for help and they said they have heard about other problems. How can I solve this? Nothing has changed on my computer. Thank you.
Sharon Cameron
Hi sharonc,
Have you tried to reinstall the plugin Photoshelter for Lightroom CC newer version 2015.
See the below for the upgrade to the latest Version
Let us know if that helps.
Kind regards
~ Mohit
-
I bought a single image, and after downloading my image always has the watermark please help.
Please follow the following steps
-
I downloaded and installed the camera Raw 8.8 and ORF files that will always open in Lightroom 5.7. The files were made using the new Olympus E - M5 II, who is on the list of supported devices. When I run Lightroom and check the on the screen, it says it's Lightroom version 5.7, but Camera Raw 8.7 despite my having upgraded to 8.8. I use a MacBook Pro with OS 10.7.5 Please advise on how to import and use ORF files in Lightroom.
The files were made using the new Olympus E - M5 II, who is on the list of supported devices.
Yes, this camera is supported by Camera Raw 8.8.
Camera Raw plugin | Supported devices
However, the required 'Version of Lightroom Minimum' column is empty. Lightroom does not yet support it.
Like the so-called Warunicorn, Lightroom does not use the Camera Raw using Photoshop plugin. It uses its own Raw conversion engine so you have to wait for an update of Lightroom separate for this camera edit Raw files in Lightroom. Or use the DNG Converter and work with the DNG in Lightroom.
-
The title explains little. I installed Master Collection CS5.5 as a full version, but After Effects and Adobe Media Encoder are still missing to the protected content. I rebooted and updated and restarted again. I installed as a trial and then entered the serial number later, and I also tried to use the serial number during installation. It seems that no matter what combination I try, I can't get MPEG2 if poster in the list to export.
I just spoke with one of the software engineers, and he said that this could be the problem:
If an exporter plugin ever to load, then After Effects try to load it again. It is possible that MPEG-2 exporters could not load a moment and then marked in this way.
I recommend quiting After Effects, remove this entire directory and then restart After Effects:
/Users/ /Library/Preferences/Adobe/After effects/10.5 (No, this directory is not deleted during the uninstallation, unless explicitly say you to remove preferences, so it may have been left in your previous attempts to uninstall and reinstall.)
Maybe you are looking for
-
How to attach a picture to the default email
How to attach a picture to the default email
-
How to read the table of string returned by the DLL
I developed DLLS in labview that takes 2 input parameters as a string and returns an array of strings in return. How can I read back this array returned strings in labview? I tried to return a string and I can't able to read. But how to read a table?
-
Dell Wireless 1705 - more another question Intel 5300
Anyone know who makes the Dell Wireless 1705 map? I was not able to card information or if it is Atheros, Broadcomm, or other... I ask because I got a laptop with a wireless card making failed and Dell has been VERY slow to replace (note side...) I c
-
Hello dear experts and users, I hope someone can help me. I can't open the kit list on the homepage of the APF-Server (CSA_MC) of any client. I see the message "error: address xxx is not allowed access to the Cisco Security Agent kit list.» My soluti
-
I have 2 887 routers with fixed DSL interface and public ip addresses. I can access the internet behind these routers and remote control can configure them via telnet Local IP of Router 1 is 10.10.10.1 and Router 2 is 192.168.50.252 I'm having diffic