10 on an iMac bootcamped windows reinstallation?

Similar Questions

• How (re) - add Apple keyboard to Bootcamp (Windows 7)

  Hello, I've been running bootcamp windows 7 on iMac no problem for two years.  It was wired apple keyboard (w / numeric keypad).  Today it suddenly stopped working.  It does not show as one of the screen "devices."  I plugged on a MacBook, work very well.  so the problem doesn't seem to be the keyboard itself.  All devices plugged into USB work fine, it's not the USB ports.  Also tried to add the wireless keyboard that came with the iMac does not recognize.  Can anyone help?  Thank you.

  Hey there cl6120,

  Welcome to the communities of Apple Support!

  Let's take a moment and get the keyboard to work again, your Windows partition. I can imagine the challenge of computing without it! To ensure that your information is protected, it is always better to create a backup of the entire system. Find the steps detailed here:

  Use Time Machine to back up or restore your Mac

  Go ahead, this is an incredible resource that directs you to a resolution:

  Use your Windows with Boot Camp Apple keyboard

  More precisely...

  If your keyboard does not work

  When you use Bootcamp to install Windows on your Mac, it installs the Windows support software (drivers) that allow you to use the features of the Apple keyboards in Windows. If your keyboard works start from your Mac OS X but not of Windows, try to reinstall the Windows support software from the Boot Camp Assistant.

  See you soon!

• USB 2.0 does not work in bootcamp Windows 10

  Hello

  I try to use my USB 2.0 USB drive on my MBP 13.3 "in bootcamp Windows 10 and it does not appear in windows Explorer. The USB key is displayed in the device however Manager. I tried my hard drive that is USB 3.0 and it works fine, but the USB does not work. I have tried many different solutions and none seem to work including physical relocation and replacing the USB name i.e. H: U:. In disk management, the device is there but says "no media" below.

  Someone at - it suggestions as to how I can get the USB appear in Windows Explorer and access the files?

  Bravo to all the answers in advance.

  the device is considered that the format is not. In some cases shaped on the Mac in Fat32 or ExFat is not readable under Windows. Reformat the Windows Fat32 or ExFat Device Manager device, it will destroy the data and mount the drive. In turn the unit may become unusable which can occur over time.

• Difficulties Bootcamping Windows XP

  I just upgraded to a 1 TB HD on my Mac Mini early 2009. I had my previous HD, Bootcamped Windows XP, which is the only OS that runs an antique program I use to return to the top of my all as old Sharp Zaurus PDA. I want to maintain this capability, but my newly improved Mac Mini even will not accept the installation disk Windows XP Professional original, instead of this ejection after a minute or two without recognizing in the Finder. I would be very grateful for all of the useful ideas. Thank you.

  Just install xp in oracles free virtualbox virtualmachine, it's a world easier

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• I am a student with a MacBook Pro, and I need a Windows operating system to run software from the school. I can't afford a new ' puter, so I got to BootCamp Windows 7. Where can I get a copy?

  I am a student with a MacBook Pro, and I need a Windows operating system to run software from the school. I can't afford a new ' puter, so I got to BootCamp Windows 7. Where can I get a copy?

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Microsoft Windows 7 Ultimate - full version

  Full version - Microsoft Windows 7 Professional

  Microsoft Store:

  http://www.microsoftstore.com/store/msstore/list/parentCategoryID.44066700/CategoryID.60521000

  http://www.Microsoft.com/student/en-us/products/Windows/default.aspx

  If you're in College, you can also check your Campus for a greatly reduced copy Bookstore.

• Connect Samsung Galaxy S III to IMAC running Windows 7 32 bit, get the error saying Hardware ID missing

  Original title: IMAC running Windows 7 32 bit

  I'm running Windows 7 on an IMAC and I recently bought a Samsung Galaxy S III and I can't connect to Kies program I downloaded for Windows. I get an error saying Hardware ID lack of ideas?

  Tried everything, but it works on my laptop running Windows 7 and will work also on the IMAC when he is in the MAC MODE just do not, when I'm in Windows mode.

  Hi JayUSMCRET,

  Are you still facing the issue?

  If you need assistance, please post back we will be happy to help you.

• HP F4580 on Imac in bootcamp windows 7, settle "no usb support" works OK on the Mac side

  Trying to install my HP F4580, so I can print from the Windows partition on my iMac. Downloaded and executed the drvier utility but it does not say "Ce PC has no USB support. Considering that the printer works very well on the side of the Mac of the partition.

  Hello

  While installing the printer on Windows using Bootcamp can work, there is no guarantee...

  The OS installed in fact like a virtual envoirnment, which means that your Windows operating system uses your Mac OS USB drivers as the host, and not those intended for Windows windows.

  This is why it is not recognized by the software.

  You can find more information on the document below:

  http://support.HP.com/us-en/document/c00668796

• iMac 27 in bootcamp Windows 7 connected to an iMac 27 OS x running in Display Mode target

  The second iMac to just display mode acts as a mirror for the first Mac or is it a second doubling your horizontal resolution monitor? I want to drag the apps to a second screen when I do a Windows Dev work.

  target display mode do not work in windows

  a normal monitor connected to the thunderbolt port would allow you to extend the desktop on two monitors also in windows but it's my setup in OS x and windows7-8 - 8.1 - 10

• Bootcamp Windows - partition cannot be mounted

  Hey all,.

  I've been using Windows on my iMac (late 2012, Yosemite 10.10.5) without problem but today after I started MacOS Yosemite (to control simple file), cannot start again to return to Windows. Had no problem Bootcamp before... have not used to any advantage either 3rd disk utility. The only thing I have recently increased the Windows size 200 GB partition by decreasing the MacOS partition through disk utility (a month ago, no problem since then until today)

  1. Windows has disappeared from the startup disk

  

  2. disk utility shows disk0s4 gray and cannot be mounted. In addition, the correct partition size was 700 but here its listed as 500 GB GB (which was the old size before you increase it)

  

  3 when I try to restart with pressed ALT, Windows, but cannot restart, with a black screen showing "a disk error occurred.

  

  I'm not very familiar with techniques more. Only, I tried to install "Find" but cannot achieve anything with it.

  I tried your advice above and seems THAT NTFS is there...

  

  one last thing... when I try to check disk0s4, said "it should be repaired. When I hit repair; It says this:

  

  Need my Windows as soon as POSSIBLE, what more should I do?

  I don't have not upgraded to Sierra again. That I should? Or it will be even worse?

  I have tons of files on Windows that I need and unfortunately not supported for a while anywhere (sorry about that now).

  Help, please...

  stuff more to indicate...

  

  and I know if it's significant but cmd + s & ' fsck - fy "has not done anything other than check the Mac partition.

• Bootcamp Windows 10 question

  Hi all

  Stumbled upon a problem, try to install Windows 10 an end 2014 27' iMac w/retina education runs Yosemite 10.10.5. Bootcamp is V 5.1.4. 32 GB, 3.5 ghz Intel I5. Disk of 1 TB of Fusion. Before you try this, I read the guide of Bootcamp to install windows, but also a number of other tutorials and forum messages about potential problems. This research, I learned that for EDU edition you must change the name of the file from Win10_1607_Education_English_x64.iso to Win10_1607_English_x64.iso. Apparently to have the former name of the file may cause OS X to not recognize the ISO. That fact I started Bootcamp, waited while the software downloaded and created a bootable USB key and partitioned my drive giving Windows 70 GB of space. After that, I got the message that my computer is restarts. Upon restarting, I got the black screen with the blue Windows logo and a spinning loading animation. After a few minutes, a blue screen with a message "Windows has encountered and error with computer and must restart," or something similar. He was pretty quick, so maybe it's not word for Word, but it was not a helpful post in terms of saying something specific. When the computer reboots, I am sent directly to OS X, though a bit slower than normal. I tried to restart with the flash drive to see if the installer would start up, no dice. Try now the Option key at startup, the flash player is not available. Went into my settings to see if I could change my startup on Win disk install USB, no luck it no more.

  Now for the question: How can I get the Windows installation again? What I have to start the process, and if so, what should I use Bootcamp to delete the partition that was created? I have re-run Bootcamp and the only option that is checked is the partition and start and install/uninstall windows and delete the partition.

  Thanks for the help.

  Perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  If you use a USB drive, not a USB flash drive, you will have problems. It is recommended to use a 8-16 GB USB2 flash drive.

  If the installation program is located on a USB Flash drive, stop your Mac, connect the USB key, restart and hold down the alt/option key and select the Windows icon in the USB port. This installs Windows in BIOS mode. If you click the start EFI icon, it will install using the EFI mode (faster). You may need to change the partition from MBR to GPT using GPT Fdisk.

• bootcamp/windows issues

  Hi all

  I gave a chance of 5 apple support reps to answer this question and still cannot be resolved so I hope you guys can help.

  I'm on the last machine of iMac (21.5 inch, 4K retina display) with operating system up-to-date. I tried to install windows with the bootcamp assistant. I belong to users who need a USB drive connected to it.

  Machine made all the copy of the files of my ISO file that is on my local drive, but when it restarts to start installing windows, he went in a small window about 2 inches of width in the middle of the screen. I managed to make the first steps, including the seizure of the product code. When I got to the screen where it shows the installation discs for Windows, there is no bootcamp drive! I couldn't use the other readers had to cancel. Have made several times now and always after the round trip in a single volume on the computer (and therefore remove the drive bootcamp). And Yes, there was a training camp in car, as I could see it in disk utility, but with no data on this.

  Really grateful if someone could help me determine why the configuration screen becomes small, and also why he can't find my bootcamp drive. As training camp did things that I can't really find anything I have hurt.

  Thank you and rega

  any ideas on this guy? still having the same problem...

• (Bootcamp) Windows 10 becomes black and restarts on bootcamp

  After installation of Windows 10 on bootcamp and navigation just normally as any other people would, after 10-15 minutes my screen suddenly goes black and restarts...

  While it has been restarted, blue "windows" sautéed as usual and points to bicycle in a circle turns on for a few seconds and then it crashes, restarts again...

  At this point I keep restarting and then it comes to auto repair, that I then used Safe Mode to get in which worked but I could not do much with it because she persisted again after the reboot.

  Side note: I reinstalled windows bootcamp 10 a bunch of time trying to solve every single problem, why it worked... even searching it up on top of google... Still no hope...

  Help, please!

  Data sheet:

  iMac (21.5 inch, at the end of 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  Macintosh HD

  Intel Pro Iris 1536 MB

  El Capitan 10.11.5 running (15F34)

  Thank you

  Please see 10 crashing Windows, but don't know why. The question is usually associated with Windows Installer an invalid Intel GPU driver.

• BootCamp Windows 10 questions

  Hello

  I have a 27 "iMac late 2015, retina - 5 k, bought a few months ago and El Capitan (OS X 10.11.5) running

  I recently bought a 10 Windows in order to create a dual boot. Of course, as I write here, it did not work.

  I tried everything I could.

  First, using the key provided with the Win10 USB I created an ISO. I placed this ISO on another USB drive and follow the instructions in using BootCamp I would get an error in this direction: BootCamp does not install, there was not enough space to create a partition. -Obviously I have a lot of space.

  Secondly, I copied the ISO on my desktop and restarted the process. Same result.

  Thirdly, I downloaded an ISO Win10 of MS, placed on the desktop and restarted the process. In this way, BootCamp has been able to create a partition and the computer restarts and you are prompted to install windows. After inputing the windows product key, I chose the "BOOTCAMP", formatted drive (to be noted that the name has changed), selected it and after hitting "Next", I get an error something like this: we could not create a new partition or locate an existing one. For more information, see installation logs.

  Any suggestions?

  1. use the ISO downloaded from Microsoft. It should be an ISO only 64-bit. It cannot be mixed.

  2 put the ISO in the Documents folder and do not.

  3. disconnect the external storage and perform the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  4. run the wizard of BC and try to install Windows.

  5. Please visit https://help.apple.com/bootcamp/assistant/6.0/#/bcmp173b3bf2 for the detailed steps for your model. Your model does not use the USB for Windows installation, and does not support the creation of a Windows USB Installer. Do not change the file info.plist Bootcamp to create a workaround solution. It will cause other problems.

  Please see also

  Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Supportfor reference.

• Installation of Bootcamp Windows 10

  Greetings,

  I have a new 2015 end 5 k in 27 imac.  Try installing Windows 10 via bootcamp.  I bought a copy of windows version full House 10 usb.

  then followed the instructions on using 10 Windows on your Mac with Boot Camp - Apple Support and downloaded the ISO from https://www.microsoft.com/en-us/software-download/windows10ISO file

  leave the ISO on my hard drive I started bootcamp.  Everything seems to install fine after updating drivers.  And the Imac restarts.  Opens the Windows Installer, I choose English and enter my product key when asked.  That's where I met the problem.  The following dialog box shows a upgrade option (which it won't because it's my first installation of windows, the other option is the advanced and wants to tells me to select a hard drive to install but then no partition have the format correct. and he tells me the problem?)  I followed the link for the fix/reset PC, but it works more.

  Don't know what to try next... thoughts?

  Use BC Assistant, remove the current installation of W10. restart installation W10 and disconnect all network connections physically before you choose the partition to which the W10.

  See also 10 crashing Windows, but don't know why.