10 windows on Satellite L50D-B-15Z - brightness control question

Similar Questions

• Installation of Windows on Satellite L50D-C-12Z 10

  I had a L50D-C-12Z, laptop

  How to install windows 10 usb?

  In my opinion, you should check if your notebook is supported for Win10 at first and after doing the automatic update of the installation.

  You want to install version Win10 clean, right? Have you checked if all the drivers, tools and utilities are available for your laptop model?

• Satellite L50D-B-15Z problem with cooling system

  Hi, I have a laptop about a year ago. And for 5 months, I have a problem with the fans. Out and the following message is displayed:

  WARNING: A problem with the cooling system has been detected. Please turn off the power immediately and return it for service.

  The strange thing is that the first time that is spent stopped working a week, then a month and finally stopped working until 3 months there now will not start.
  I have even the implied warranty of the product, but I didn't think to send because it takes virtually every week for classes. I can use it, but if I perform actions that require superior performance as playing the games or download several videos at the same time to start warming up, getting the message and if continuous closed finally down.
  What should I do and how can I solve the problem?

  Sorry if I do not quite understand. I do not speak English.

  There may be dust stuck in the heat sink.
  using compressed air to blow dust through the vent.

• Brightness control question

  Hello. I use windows pro 8.1 on my hp pavilion dv6 7040tx replacement of windows 7 Home premium. When win 7, it was good except the thing that my system was a little slow to start and stop on time. But as I installed windows 8.1, my KEYS in ORDER of BRIGHTNESS f2 & f3 ARE NOT WORKING... I tried all the possible solutions, recommended by microsoft, but my problem is still there. Brightness is too high and I am not able to low that it down. Please help me as soon as possible... or send a link of any driver if necessary to be installed.

  Hello:

  You probably W8.1 graphics drivers.

  First install the Intel HD graphics driver and restart.

  https://downloadcenter.Intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207%20(64-bit) * & DownloadType = drivers

  Then, install the Nvidia graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127819-1&cc=us&DLC=en&LC=en&OS=4158&product=5363031&sw_lang=

• MY DELL INSPIRON 15 3521 BRIGHTNESS CONTROL QUESTION

  When I bought my DELL 3521 a few weeks ago, that came with OS Ubuntu, I remember the brightness of the screen is adjustable using the Fn keys (F4 / F5).

  Since I installed Win7 a few days back the brightness of the screen remain very dull (maybe the lowest setting), that doesn't bother me for my day to day work. But for my photo and graphic work, this intensity is far from satisfactory.

  I have checked the internet on it and seen a lot of you also share the same experience. I did almost all of the advice given in it and since there was no improvement, I downloaded all the drivers on the official DELL site for Win7 and install.  Then something happened, it's now, I could see the brightness and the volume of the control on-screen icons or symbols.  Incindentally control of its (speaker) works very well (Fn/F10/F11/F12), while the screen brightness indication appears without any response to the keys (in fact, it indicates the maximum brightness in the scale, and when I try to reduce the scale reduced by point/scale and rest and not move any further).  However, there is no change in the brightness of the screen, which as I have already said, is low.

  I have not yet decided to contact the dealer on this issue which might be a small question perhaps, that I am lying to reconcile with yet.

  I don't know how to solve this problem. Is this a technical problem or a manufacturing defect? Could someone help me please. Must be very grateful.

  Concerning

  Gehan Wijesinghe / Sri Lanka

  Hi Gehan Wijesinghe,

  Please go to the screen of the BIOS by pressing F2 permanently at the start to the top and do ensure that the behavior of the FN key is defined on multimedia. (See the image below)

  Also download the quick adjustment of the link below.

  http://Dell.to/143006V

  

• Satellite C70D-B-307 - brightness keys stopped working after migration Windows 10

  The brightness keys have stopped working after migration Windows 8.1 to Windows 10 (Satellite C70D-B-307).

  How did solve you this?

• Card problems WiFi - Satellite-L50d-c-12z

  Hello everyone, I recently bought this beautiful model of portable Satellite L50D-c-12z. I have a problem with the original wireless card because it is of poor quality and I decided to replace it with a better. I bought an intel 7265ngw BN. After having mounted the laptop detects the bluetooth and it works fine, but the wireless part does not work and gives me error device cannot start. (Code 10). who can tell me whether or not this wireless card is compatible with my laptop? Thanks in advance

  I have 8.1 windows x 64

  Intel adapters may have compatibility problems. You may have more luck with a Realtek or Atheros card.

• Satellite C50 - A - Minimum brightness is too bright

  Hello

  I have a C50 - A with Windows 8 Satellite and refused to the brightness of the screen down to the lowest setting by using the usual methods (Control Panel and the quick keys).

  Although it is on the lowest setting, it is still much too clear to me.
  I don't want a theme of different windows, just a reduction more luminosity.

  I could turn my old laptop much lower.
  Any ideas?

  > Although it is on the lowest setting, it is still much too clear to me.
  > I don't want a theme of different windows, just a reduction more luminosity.

  Different types of views supports the properties of different brightness.
  This screen TFT color fire side CCFL supports 8 levels of measured in NIT brightness (Nit is the standard luminance unit)

  _Brightness NIT_
  level8 203-225
  communautaire7 119-149
  Level6 69-96
  Level5 53-75
  Level4 41-56
  Level3 32-46
  Level2 26-40
  Level1 22-32

  I assume that you have already set the brightness to level 1 (22 32 nit) well, it's the level as low as possible

• Satellite L50D-B-12W does not recognize the Integrated GPU

  Hello

  I recently bought a laptop Satellite L50D-B-12W.

  The laptop comes from Italy and im from Spain, but the stock windows installed from the factory was in English.
  I change windows stocks for a Spanish 8.1 for Windows Pro 64-bit and the problem starts here.

  This medication works well, except the built-in graphics card.
  The laptop tells me what the model is AMD APU A6-6310 with graphic AMD Radeon R4 card.

  Initially I download graphics drivers web support AMD APU.
  I installed and recognizes the cpu but not the graphics card (remaining with the VGA in Windows standard) for videos HD plays with cuts and slowly.

  Then I download the autopilots downloand shape AMD and the program downloads the APU A6 drivers but the problem is the same.

  I try with Windows 7 64 bit also, but I can't seem to recognize the integrated graphics card.

  Please, can someone help me?
  What are the correct drivers I need to download?

  Hello

  The Satellite L50D-B-12W was not equipped with a dedicated (external) graphics chip
  The L50D-B-12W Satellite was equipped with rolande A6-6310 AMD processor supporting internal graphic unit Radeon R4. This GPU is just a part of the AMD CPUS.
  The graphics AMD compatible driver is already listed on the page of the Toshiba UE driver under:

  -Laptop
  -Satellite
  -Satellite L series
  -L50D-B satellite
  -PSKULE
  -8.1 Windows

• ISO: Driver for Satellite L50D - B - 160 PSKULE Page

  Hello

  I'm desperate searching for the driver, including Windows 7 page, for the model called

  "Satellite L50D-B-160 / PSKULE-02L03QGR.

  I bought 3 days ago, pre-installed with windows 8.
  and on which I have now installed Windows 7 on to as I woould need drivers for Windows 7.

  Nowhere on the Toshibas pilot pages I can't find exactly this model, for some reason any.

  Is there another similar model, which is listed in the database of driver/support download where
  I use the drivers?

  Or better, does anyone have the link for the driver/download page for this model?

  Thank you very much.

  All the drivers for your model mobile, you can find on Toshiba download page http://www.toshiba.eu/innovation/dow...ivers_bios.jsp

  

• Low Wi - Fi signal to the new Satellite-L50D-B - 14 p

  Recently I bought laptop Toshiba Satellite L50D-B - 14 p and the wifi signal is very very low.

  It's always around 2 to 5 bars and maintains signal lossing completely several times per hour.

  So I select disconnect and reconnect again.
  My previous Toshiba laptop was in the same place in the House and were always five bars and laptop Fujitsu Siemens of my husband is 0.5 m and has also five bars all the time. So there can be no question of router.

  The laptop came with the latest drivers. However I have wifi drivers uninstalled and reinstalled one on the site, released in mid-2014. And still the same problem.

  I checked for power management and power options all wireless adapter power saving mode is set to "maximum performance".

  I have 8.1 Windows which is preinstalled.

  What should I do?
  How to solve this problem?

  Thank you.

  > I checked for power management and power options all wireless adapter power saving mode is set to "maximum performance".

  Did you put the maximum performance of WiFi in the power station you use?
  Y at - it another using the battery power and power supply?

  In addition I recommend you to go to the Device Manager? WiFi card? Properties? Advanced tab.
  Here you can see the different possibilities such as change the Wlan standard, but also WiFi channels.

  Please don't be mad at me but different Wlan modules support different standards and sometimes it can happen that the router Wlan and Wlan module/card don t work properly because of Wlan channels and settings (WPA/WPA2 AES, TKIP) encryption standards.

  Last but not least, there could be a problem with the WLan antenna... of course it would be a worst case and this must be checked by an authorized service provider.

• Satellite L50D - no boot device please don't restart

  Hello

  I'm trying to fix my parents laptop: it's a Satellite L50D-B - 14 p. It shows the error "No. Bootable Device please restart System" at startup. So far, I tried disabling "secure boot" and by replacing the boot mode 'boot CSM', without success.

  I can see in the settings of the BIOS that the HARD drive is still recognized, is not dead. I don't have the installation diskettes.

  Any advice on what to try next would be greatly appreciated.

  Thank you.

  Any ideas on how I can proceed?

  Is the fact that the HARD drive can still be seen in the BIOS, means that it is not dead? At the MS DOS command prompt, I typed in C: and it found nothing - it gives me to think that the hard drive may indeed be dead?

  I also ran a program of removal of data from a bootable CD. He managed to acknowledge that the HARD drive has existed and acknowledged that he had 932 GB. However, it said 0 bytes were free (which is odd).

  Any ideas would be appreciated.

  Thank you.

• Satellite L50D-C - marketing questions

  I've had my Toshiba Satellite L50D-C since October 19, 2015 and almost day 1, I had problems turning on the laptop in standby mode. I press the power button and the led lights as the num snaps and caps lock lights up. The power light stays on as the num snaps but the light caps lock turns off, then I wait and wait and nothing happens. I found that if I hold down the button for a few seconds, the laptop turns off and then I am able to restart.

  I asked questions about the place of purchase and they told me that I have to remove the battery and press the Start button at least 10 seconds, effectively discharging the power as in a flash said me and then I should find the computer laptop mode voltage standby.

  I did and it works very well for a few days then the same problems of returns, again, the '' solution '' and there I go again.

  While this solves my problem, for a few days, I find it very strange that it is a necessary step should be taken. My husband also has a Toshiba Satellite, although a year or more so than mine, and he has never had this problem.

  Is this normal? .. Can it be solved?... under warranty? .. What should I do? .

  Thanks to anyone who can help me.

  Lainie

  Hello

  I have exactly the same problem, but also find that even after changing my power settings the laptop will cut itself in hibernation/sleep after a period of inactivity. I have to then press the power button, nothing happens except the power light is on, then I have to press the power button for about 5 seconds and then turn it back on again... It's such a pain... I hope someone can help answer these questions on how to fix soon :-(

• Satellite L50D-C-18J - two modules of RAM but single track only

  Hi all

  A few days ago I got the Toshiba Satellite L50D-C-18J with A10 - 8700P AMD processor.

  Factory 1 with 8 GB (DDR3L 1600 MHz) memory module are installed. According to various tools (AIDA64, HWInfo64, CPU - Z), the memory will operate at 668 MHz, that is to say 1333 MHz mode.

  The free memory slot I have with another 8 GB DDR3L held at 1600 MHz (with the same memory timings, but other manufacturers). The Bank will continue to operate only in single channel mode and not in dual channel mode. The A10 CPU should support.

  I have installed the latest version of the BIOS.

  We have an idea of how I have the dual-channel mode and can set the frequency of the memory? In the BIOS, there is unfortunately almost no parameter or someone has the same laptop model and with it dual-channel mode is running?

  Thanks and greetings

  Mario

  Hello. Another manufacturer is not a problem.
  You should check the following:
  (1) make sure that the two RAM modules operating at 1.35v. Search the Internet, what should be the supply voltage of the RAM you have installed. If this does not work at 1.35v then that's the problem.
  (2) whether these RAM modules supports ECC. If one of your RAM supports ECC and the other is not, that's the problem.

• Satellite L50D-B - 16 M back to factory default?

  Hello

  Is there an easy way to put the Satellite L50D-B - 16 M to its parameters by default without having to go through the process of making recovery discs and all that?

  There is more imporant on this file, I am looking for a simple way to back to its default settings. (The old trick with the pressing 0 while turning it doesn't seem to work).

  Thank you!

  The old trick with the pressing 0 while turning it doesn't seem to work

  By pressing the 0 key, began the recovery of HARD drive partition recovery.

  You could also turn on the computer, press and hold the "F12" key while the Toshiba logo appears.
  Then you should see the start menu and the last option called HDD recovery should also allow you to start the HARD drive recovery process...

  But this only works if the HARD drive has not been changed and the recovery files are always available.