10 Windows, system and process compressed memory & slow down the performance of Lightroom

I use Lightroom 6.6 (non - CC version) and for months, I have noticed the degradation in performance on my machine Windows 10 the more Lightroom runs. LR restarts solves the problem for a while, but anywhere from minutes to an hour, Lightroom performance down to the level where it becomes unusable.

Finally, I think I found a reproducible indicator in the Task Manager which may lead to the reason for this - it seems to be linked to the process "System and compressed memory" which is new for Windows 10. Maybe it's a coincidence, it could be the correlation instead of causation - but that's what I want to know.

When I start Lightroom and edit some pictures, everything seems normal in the Task Manager:

17-07-2016 00-59-41.png

Lightroom uses about 6 GB of memory, which is OK, as I 24GO of RAM in my machine. The mentioned system and compressed memory process currently maintains that a low profile with the use of memory 204 MB and Lightroom performs well at this point.

Some pictures later, however, things start to get worse:

17-07-2016 01-09-15.png

The system and compressed memory process increases its memory footprint and Lightroom memory footprint decreases. At this point, I think Lightroom is already slower - but this could be just imagination. It isn't so bad so I can be sure that it really is.

But a few minutes and retouching of photos later, system and compressed memory past Lightroom in the memory usage and which are how things always become really bad:

17-07-2016 01-37-54.png

System and compressed memory draws a memory more and more away from Lightroom, and meanwhile, Lightrooms performance is killed. As I understand the system and memory tablet, it's intent is to compress the memory instead of disk paging-, but it seems he has high performance here and there of the implications would not even be necessary to page or compress memory because there were a lot:

17-07-2016 01-38-08.png

Perhaps a Windows problem, may be a Lightroom problem - chances are, it's a combination of the two. With 24 GB RAM and Lightroom be gourmet applications in memory just running, this should not occur or cause problems. I use other applications in memory such as Visual Studio, or sometimes first - this does not occur when you use this application.

I can't believe I'm the only one knows than that on Windows 10 - yet I have not found much about it online, just a few remarks on this subject in some support threads here and there, but no solution.

So-, here is my question d ' others have experienced this too? Someone was able to get this under control? It's really frustrating relaunch Lightroom every 30 to 60 minutes to get a good performance.

Thanks for the tips

b.

There is a leak memory known in Lightroom 6.6. You might want to try to go back to Lightroom 6.5.1 and see if the problem goes away. See How do I restore a previous version of Lightroom? The Lightroom Queen and where it says Lightroom 6.1.1 you insert Lightroom 6.5.1

Tags: Photoshop Lightroom

Similar Questions

  • Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

    Can I use an SDXC (512MB) card as a drive hard primary (such as startup HD with El Capitan) on my iMac 5 K - end 2015? It will slow down the performance of the iMac?

    I did it with a 32GB SDHC UHS - I Transcend

    I do not recommend under OS X from such media, but it works very well. I was preparing for my review of the CPHA Yosemite and did not want to mess with the internal drive of OS X.

  • Why adobe flash player slows down the performance of the browser all?

    I rememeber more there are problems with the plugin flash player in Mozilla's Firefox browser, causing the plugin to crash: Adobe Flash plugin has crashed - prevent it from happening again. Firefox help

    After a recent update (17,0,0,134) he almost never crash, but it slows down all browsers performance until she finally released the following video. The majority of all the news sites use flash player

    to launch its "commercial. And there are several boxes with advertisements, for example: www.lrytas.lt

    And while I'm listening to music via youtube and on the other tab reading news on this site, when the music clip ends and the browser begins to load another clip of music,.

    then the job of the Navigator everything is paralyzed - I can not write a text, can't scroll down, do not click on a link. This is because the system is busy while loading YouTube next clip.

    Mouse marker becomes in a circle around rotation indicating the loading procedure (firefox does not). And it takes time - up to 10-15 seconds to launch the new video. Then sudenly my actions is executed after such a break - my text is typed.

    My scroll down and maybe link is pressed. All this procedure slowdown is annoying. It wastes a lot of time. I opened the Task Manager and I see that Firefox takes 900,000 or 1300.000 K memory. My OS is Windows 7.

    I close the process firefox.exe together and then it automatically closes the plugins. Then I open the browser again and he ask to retrieve automatically suspended sites, I agree with her and then she just opens again. And once again

    He works constantly for some time until it slows down the browser again. With several tabs more problems. In addition, the display of a video sometimes too late too. Some images are lost, as the system is already too late because

    loading procedure takes too many resources.

    A long time ago long flash player was better. But today, with increased again * substandard computers like iphones iPad you need to evolve the player such that he must play throughout, but its performance on different platforms

    This is not the same.

    Who is guilty - my PC, Firefox or the plugin? Or maybe that I am?

    In my view of cold, users actions cannot be ignored. Preference should be the user continuous control on a system load.

    From now on, everything works fine. No complains. I mean without everything turning off hardware acceleration. It's after a few windows or update firefox.

  • Slow down the performance/no answer

    Everything takes a very long time to open, and when you click on the taskbar, it says "not responding". do not save even Ctrl-alt-delete for about 30 seconds. There is always a rattling in the area when the computer is slow.

    This problem is solved only when we use eusing free registry cleaner once we turned on the computer. It seems that the computer is fine for the rest of the day, but the next time that us turn, it is incredibly slow and unresponsive.

    Thank you

    Adeline

    Everything takes a very long time to open, and when you click on the taskbar, it says "not responding". do not save even Ctrl-alt-delete for about 30 seconds. There is always a rattling in the area when the computer is slow.

    This problem is solved only when we use eusing free registry cleaner once we turned on the computer. It seems that the computer is fine for the rest of the day, but the next time that us turn, it is incredibly slow and unresponsive.

    Thank you

    Adeline

    scanning using the preforms

    http://www.Malwarebytes.org/

    http://www.systweak.com/AntiSpyware/

    http://www.free-AV.com/en/download/index.html

    Make sure your system is clean first. use ccleaner to get rid of junkfiles http://www.piriform.com/ccleaner/download

    preform disk cleanup and defragmentation in order to improve the performance of your system.

    do not use unistall programs u.

    Make sure your windows is uptodate and drivers work correctly and that they are as uptodate.

    Use http://www.javacoolsoftware.com/spywareblaster.html to protect your pc against spyware, adware etc and keep it uptodate then use firefox as your browser

    only use the block announcement more, no script and WOT for safer web browsing for firefox.

  • Slow down the performance of the system and unable to access My Documents

    Title: Looking for elements...

    I have a lot of files and folders in my My Documents folder and when I click on them, most often the status bar in Explorer says "search elements...". "and it will stay there for 30 seconds sometimes now. How can I get the browser to just display the files and folders in the folder that I'm looking all sweep and not try to determine what is in any or to display thumbnails etc.?

    Hello

    -How much memory is available on your computer?
    -How much free space is available on the C: drive?
    -You are aware of any changes made on the computer before this problem?
     
    This can happen only when there is less space on the hard disk, a lot of junk files, temporary files, unused programs and also bad sectors on the hard drive.
    So to improve the performance of the computer, I advise you to follow the steps from the link below and check if the problem persists.
    Maintenance tasks that improve performance

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     
    Hope this information helps.
  • Slow down the performance of office and viceo on W7 (SP1) computer to office

    Dragging windows on my desk late movement of the cursor. Videos play mode by stop-motion. I tried to install the updates, restart, disk defragmentation, etc, etc... Nothing seems to work. I use Office home and Student 2007 on a 64-bit desktop. Any ideas? Thank you.

    Hello

    See if this helps you improve performance.

    Search for malicious software with the FREE version of this program.

    This is the right link to download included.

    And does not accept the option "Pay for the version" trial installation

    Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

    http://www.Malwarebytes.org/products/malwarebytes_free

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can clean your hard drive using these two methods.

    "Delete files using Disk Cleanup"

    http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

    Using the free CCleaner program:

    http://www.Piriform.com/CCleaner

    In NO case use the registry cleaning Option in CCleaner

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    Make sure you have the latest updated drivers:

    Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    What are the other steps, which does not include some of the above:

    "Optimize Windows for better performance.

    http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

    "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    See you soon.

  • I have incountered some slow down the performance of my computer

    Dear Sir.

    I bought a loptop Vio since I put on the updated incountered a slowing performance and once I click on the application it takes several seconds to respond. that our my personal problen now my loptop, could you please send me a solution and how can the normal setting

    Best regards

    Eduardo Indenerio

    Hi Eduardo,

    1. not this problem occurs when you run a specific program or out of order?

    2. are you referring to Windows update? Have set you it as "Never update" mode?

    3. do you get an error message?

    4. What is the antivirus installed on the computer program?

    You can run the Fixit described in the article:

    Reference:

    Difficulty of Windows system performance slow computer problems

    http://support.Microsoft.com/mats/slow_windows_performance

    Also see the steps mentioned in the article:

    Reference:

    Optimize Windows 7 for better performance

    http://Windows.Microsoft.com/en-in/Windows7/optimize-Windows-7-for-better-performance

    Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

    Hope this information helps. Provide more information so that we can help you.

  • Slow down the performance of the internet in general.

    PERFORMANCE OF THE INTERNET IN GENERAL

    Please comment on the following: A RESPONSE to MY QUESTION WAS: "the thing that affects the performance of the Internet is the line speed you use."  The answer refers to the DSL, or ROADRUNNER, or WI - FI and other Internet services?  But, of course, there are known factors that can slow down your browsing habits: more than a running program; reading information while listening to music, too, on the same PC; not enough space on the hard drive; possible viral infection, classic disk cleanup, but also occasional Defrag, etc.  Thank you very much.

    Hello

    The type of Internet connection that you use is the most important factor in determining the speed of your connection. The most common three ways to connect to the Internet at home are dial-up, DSL and cable. If you have the choice, cable is usually the fastest, but DSL and cable are faster than dial-up.

    See: http://windows.microsoft.com/en-US/windows-vista/Why-is-my-Internet-connection-so-slow

    http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

  • Windows 7 Pro 64 bit and slow down the performance of the system

    Its week Tuesday I had to buy a new motherboard for my computer as a (ASUS M5A97 THE R2.0) upgrade from my old Board that was used at the time. At present, I suffer from these setbacks and problems that I don't understand completely at all on the right, or what reasons is causing my system to the right way to work. From this moment everything that I know, is installed correctly with all the appropriate drivers (x 64) are also installed for the chipset on the map, the video card (XFX Radeon HD 6770) as well and nothing else that needed to be installed at the time because the operating system running the version of Windows 7 Pro 64 bit. The problem that I'm facing here is that for some reason, my system is now slowly in response to any kind of program or an application (either Internet Explorer, Windows Update). I have flashed the BIOS and there now the most recent version, and the system is upgraded to SP1. Any ideas?

    Good so I found the problem. It was real HARD drive I had in my system. After you told me to do what you had posted, I started thinking and wanted to try a theory. I connect a spare hard drive I had in another computer, I like a build up of hobby. It's only 200 GB, but still more than enough. Anyway, when about and installed the operating system on it and of course I could tell a MAJOR DIFFERENCE in the overall performance!

    The original HARD drive that is a Western Digital 500 GB took more than 2 1/2 hours to install completely; the Seagate 200 GB took only 20 minutes! In addition, I have much better overall system stability. So for now I'll stick with the smaller drive, until I can get a HARD drive more be my main in my system.

  • Slow down the Performance Fix - no Format & gt; Order of police games!

    In the technical Note published recently to deal with the slow performance of RoboHelp, instructions refer to a Format > font sets command. In MY version of RH7, this command is not available. Is it possible to transform this so I can delete unnecessary fonts?

    Nevermind, I found it. Apparently, you will need to have your cursor in the content of a file before this command becomes visible.

    Deal with this issue a non-issue.

    In the technical Note published recently to deal with the slow performance of RoboHelp, instructions refer to a Format > font sets command. In MY version of RH7, this command is not available. Is it possible to transform this so I can delete unnecessary fonts?

    Nevermind, I found it. Apparently, you will need to have your cursor in the content of a file before this command becomes visible.

    Deal with this issue a non-issue.

  • I have Windows XP and my PC gets slower and slower

    I have Windows XP and my PC gets slower and slower

    Well, if you have a slow computer experience, it is a serious performance problem.

    There may be several reasons for the performance decline computer day after day, most common are the following:
    -Inadequate system or RAM, memory
    -Too many unnecessary things and fragmented in the computer files
    -Programs that run in the background and consuming system resources
    -Activity, virus, Spyware and Malware
    -Several Antivirus running in the system

    I guess if your computer worked well at the beginning means that you have good amount of system memory or RAM memory, but it is recommended to increase. Otherwise, you can do away with the increase in the virtual memory or paging file.
    Right click on my computer go Properties. In the System Properties window go to the Advanced tab.
    Now, click on the settings buttons in Performance. The Performance Options window click on the Advanced tab again and you will see the virtual memory down. Click on change. Now, you can keep it managed system or Custom. If you use the custom, then make sure that the initial size is 1.5 times the physical memory is actual and the maximum size is 3 x times.
    Then apply and close all windows and restart the computer, note any change in performance.

    To clean all the unwanted files just use the disk cleanup utility, it will clean up all unwanted computer junk files. Then you can go ahead and use Disk Defragmenter to defragment all the files fragmented in the c: Drive.

    Prevention of the execution of unwanted programs must be done with caution. Sometimes programs load automatically whenever the computer is turned on these programs to continue to run in the background and consume system resources. The best thing to do is to stop them from loading automatically. Click START and then click RUN. RUN window opens upward, in the type of window run msconfig, system configuration window opens. Click on the last tab that says startup. You will see the list and most of them will have a check. First of all to uncheck all the, then control selectively the most important like your Antivirus, Internet connection, modem, another important application driver tool that may be necessary. You can hardly but understand that those check must sound familiar to you. Apply and then restart the computer. When the computer restarts, you will see a prompt that saya that you have used the System Configuration utility. Simple uncheck the box at the bottom and click OK. Notice the change in system performance.

    If you run more thn an Antivirus, make sure you uninstall one. Since then, most of the antiviruses have a real-time scanner or resident shield that consumes some system resources, using several will cause more consumption of system resources. Subsequently, slow down the computer.

    If all of the above does little to improve the performance of the Virus issue might have to be declared. However, let me know and we'll do something if it's a virus problem.

  • I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

    I have osx imac 10.9.5 version and can't use iCloud told me to go to the yosmite should I do this and how do I know if I have enough memory and it won't slow down my computer

    If your iMac can run a newer operating system, it will not let you install. Where possible keep updated for better security.

  • My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files

    My Vista crashed and I've switched back to XP. Now I have 1mil more old files compressed that I can't get rid of and it slows down the computer. How can I get rid of these files.

    Hello

    1 are. what type of files?
    2. when they are stored?

    3. What is the size of these compressed files?

    Try to perform the clean boot on the computer and check if that helps.

    Reference:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    See the bottom of the articles that might help you resolve this problem.
    How to make a computer faster: 6 ways to speed up your PC
    http://www.Microsoft.com/atwork/maintenance/speed.aspx
    Slow PC? Optimize your computer for peak performance
    http://www.Microsoft.com/athome/Setup/optimize.aspx

  • Envy 17 3D: fan runs constantly and slows down the system

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Kelvin1 wrote:

    My HP ENVY 17 3D laptop fan runs constantly and slows down the system. I reduced some applications in the Task Manager and also cleaned the fan most of the time. But keeps the noise and the fan continues to run. Please what do I do?

    Means that your mouths and radiator has more than dust on them and the fan does not work correctly. You have to disassemble and clean the fan and vents to let him work again properly.

  • Performance - remove igdkmd64.sys monitor - its by slowing down the boot process

    Hello

    I am running windows 7 Home premium SP1 64-bit and the monitor above suggests that I try to delete the driver above because it slows down the startup / boot process

    Can someone please suggest easy steps to remove the same and if there are implications for the removal of the driver

    Hello

    What is there to process you followed to remove it... It's actually not a bad file... Its graphic driver Intel. Igdkmd64 sys is the Intel Graphics Kernel Mode Driver for Microsoft Windows 8, Windows 7, Windows Vista, and Windows XP 64 - bit operating systems.

    the igdkmd64.sys file could be the driver Intel Graphics. Have you tried to download the drivers directly from the Intel web site? If this is not the case, try using this link:

    http://www.Intel.com/p/en_US/support/detect

Maybe you are looking for