100 GB Vista full boot need to merge with the E drive.

I have vista, my startup diskc: disk is full Iwant to merge the e drive?

100 GB full Vista, 1 disk boot hard need to merge with the E drive part.  HOW?

Hello

What is the size of the E:Drive?

E: drive may be the recovery disk to reinstall the OS, if there is between 5-15GBs.

Do not touch, except to make the recovery of the disks.

Here is the info on the recovery disks >

Your recovery Partition was photographed on your hard drive during the production of your computer by the manufacturer for all of these reasons.

1. to reinstall Vista from in the case of a failure of the system, based on individuals or the keys at startup.

F10 or Alt + F10 or F11 are a couple of different manufacturers use sequences.

You will need to ask your manufacturer for proper sequence.

2. to make the recovery disks on if your drive hard breaks down, so that you can then reinstall the operating system on a new hard drive.

Also ask them how to make records.

Your D: or E: drive of recovery should not be used for backups, defragmented, etc..

There are backups on an external hard drive.

To resolve the problems that have arisen with the recovery D: Partition, you will need to contact the manufacturer of your computer to remove all that has been added to it.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

If E: is not the recovery disc, with disc of Vista management you must use all the space of the E: drive, doesn't not part of the E:.

See if this applies to your situation.

Save all data on E: > E: remove > and then extend C: into the now unallocated space where E: was.

"How delete and extend a Partition with Vista disk management"

http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

You can use these methods to get space on your C: drive:

http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

http://www.Piriform.com/CCleaner

Do NOT use the part of the registry of CCleaner.

See you soon.

Tags: Windows

Similar Questions

  • How to create the new library of Photos to iCloud without it merging with the former?

    I started my iCPL in January 2015. It is now 104 Gb/8000 photos. In a year I need to upgrade my plan of storage iCloud.

    So I think I would make the existing one a regular photo library, and start a new photo library iCloud.

    If I start a new library now and make the iCPL, merge it with the existing iCPL. I want to replace the existing in iCloud.

    I could do (I think): -.

    1. make the existing a non-iCPL and rename it.

    2. create a new lib Photos and make the library system iCloud.

    3. the new library (empty) will download and merge with the former in iCloud, so it contains now 8000 photos of the original lib.

    4. delete all the 8000 photos in the new.

    5. start put new photos in the photo library now empty iCloud.

    Is there a better way? I do it too difficult?

    I can see what I've described above taking a long time to settle on all devices, even if I can avoid 30 day waiting by removing the deleted record recently.

    Thank you

    You use "Optimize Mac Storage" on your Mac? Then, you will need to make sure that all the photos to download to your Mac before you copy your current library corresponding to your backup disk and start deleting iCloud.  Is there enough free storage on your Mac to do this?

    I would also like to than my thin iCloud library. My iCloud library has only my favorite photos of many years, I want on all my devices as well as the most recent photos that I'm still trying. Because the iCloud library must be the library system, only in iCloud library photos are available in the media for other applications browser, so I keep all the photos here that I can use in other applications.

    What I do to save bandwidth and download time is to have two libraries:

    1. A large library where I keep all the photos I want to keep - it's my photo archives. This library is on an external drive that is supported by Time Machine and is currently still an Aperture library.
    2. A smaller library iCloud in my pictures folder.

    I import new photos first to the iCloud library, remove all the bad moves that do not need archiving, then I export the originals at the library of the archives.

    And then I start editing the photos in the library to iCloud and learn by removing and keeping only the best photos.

  • I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    1. did you remove Bootcamp using disk utility?

    2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

  • HP Color LaserJet CP2025n Prin: I need to download the older driver because a program does not work with the new driver

    Where can I find the olderdriver that I can use windows 64 bits 10,

    because a program does not with the new driver.

    The year may be 2014 or almost.

    Your Timo

    @tisalmet

    Thanks for the reply with the details,

    You can activate the Device Manager to view hidden devices by following the steps mentioned below:

    To work around this behavior and display devices when you click Show hidden devices:

    1. Click Start, point to programs, point to Accessories, and then click command prompt.
    2. At a command prompt, type the following command and press ENTER:

      Set devmgr_show_nonpresent_devices = 1

    3. Type the following command a command prompt and press ENTER:

      Start devmgmt.msc

    4. Troubleshoot the devices and drivers in Device Manager.

    For more details: click here

    Uninstall all software and drivers for printers:

    When you need to uninstall a driver completely, the best and safest method is to use the uninstaller of the device (if it has one). If you have added the device to your system with a Setup program (as is the case with most of the graphics card and sound card drivers, for example), you can uninstall it as you would any other program.

    1. Click Start, type uninstall program, and then press enter.
    2. In the uninstall window, which appears, scroll through the list and find your device or drivers. Double-click the entry to start the uninstall process.

    Sometimes devices will not have an uninstall program or the uninstall program will not appear in the list. In these cases, you can use Device Manager to remove the driver completely.

    1. Click Start, type Device Managerand press enter.
    2. Find and double click on the category of the device you want to uninstall (for example, the graphic card would be listed under display card) driver.
    3. Right click on the device, and then click Uninstall.
    4. Windows prompts you to confirm the removal of the device. Click OK to remove the driver.
    5. Once the uninstall is complete, restart your computer as soon as possible.

    Once the above steps are done, click here to download the full software features for your printer and follow the Setup process to start to use your printer again.

    I would like to know if these measures worked for you.  If they did, it's great!  Give us some reinforcements by clicking on the solution and laurels, buttons that help and others see that we have the answers!
    Good luck.

  • Used to boot Windows - does not recognize the hard drive

    Hello. I had my computer laptop vostro dell for 5 years, and I've never had a problem. A few weeks ago, I was starting, and I got the blue screen of death. I had the same thing when I rebooted. I bought a SATA dock for recover my files, so I could format it and start from scratch. However, the dock does not detect my HARD drive, although I hear the disc running. I tried to connect a Dell Latitude docking station to transfer the files, but the Latitude does not recognize my HDD ether. Vostro runs XP Home Edition and Zorin OS, Latitude anime XP Pro. HHD in question is a 120 GB Western Digital Scorpio for drinking devices. Help, please.

    You boot from the disk and choose "Try without Unbuntu and change to your computer"?. Honestly, it looks that you have installed. In addition, using raid with Windows Xp support?

    If you have chosen to 'Try' Unbuntu I recommend now you run chkdsk /r from the recovery console. The problem is not with the hard drive probably, but with the file system.

    Download WIndows Xp Recovery Console from HERE. Save the file to your desktop. You will need to burn the iso image to a blank cd using the same way you did to the image ISO of Unbuntu ImgBurn. Although the instructions below refer to a Windows disk, the disk from the Recovery Console that you create will do the same.

    1. Insert the Windows XP CD in your CD-ROM drive and restart your computer. If you are prompted, select any options needed to start (boot) on the CD.
      
    2. when the text portion of Setup begins, follow the prompts. Select the repair or recovery option by pressing R.
      
    3. If you have a dual-boot or multiboot system, select the installation that you want to access from the Recovery Console.
      
    4. When you are prompted, type the administrator password. If you have not set a password for the account admin simply press on enter
      
    5. at the command prompt, type chkdsk/r > press ENTER. (Note: there is a space between the slash and the letter k).
      
    6. at the end of the output of scan type > press ENTER.
      
    7 restart your computer.

  • Can I upgrade my computer Windows Vista 32 bit to 64 bit with the specs of my computer?

    Here's a question. I want to upgrade my pc to a 32-bit - 64-bit, 120-750 hdd hard drive and the RAM to 4gbs. is it possible for a 32-bit processor, 512 MB RAM oringally vista home 120hdd?

    original title: everything just curious...

    Hello

    Check with your system manufacturer (manufacturer of motherboard for custom systems) to see if your computer
    can run Windows 7. If so check to see if it can run 64-bit which has higher minimum
    requirements than 32-bit. Finally check to see if the hardware upgrades that you make will be
    work in this computer. Don't forget if you spend a lot of money on upgrades, you may have
    but could a new computer for the same price. And then you'd have two systems.

    Windows 7 system requirements
    http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

    32-bit and 64-bit Windows: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

    64-bit support
    http://www.Microsoft.com/Windows/Windows-7/features/64-bit-support.aspx

    Run the Upgrade Advisor, and check with the center of compatibility for your key features. Also
    some system manufacturers have the online help and information for the upgrade to Windows 7.

    Windows 7 Upgrade Advisor - run this http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

    Also check the Compatibility Center
    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

    To see if you can run XP, Vista, or Windows 7 64-BIT, you will need to check with the system
    manufacturer if it is 64-bit capable. Are there drivers 64-bit for all devices? To run 64-bit you
    need 64-bit drivers (and the system must be able to run this version of Windows 64-bit).

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

    I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Mick Murphy - Microsoft partner

  • Question about merging with the function of the background

    Hello, I was wondering if someone can tell me when it is useful to use the fusion with the function of the background.  I see nothing in the documentation on the subject. It seems to me that you can make your changes on the master slide, and you would not need the feature.  If I'm misunderstanding please let me know, thanks.

    Hello

    Is not safe to be comprehensive here, just my ideas. If you merge objects with the background on a master slide, you can save on the size of the file, because the background is an image, compared to several objects. You will not be able to edit these objects more. Also the slide background will always be behind any object. For slides model objects you can have them either on top, where they sit on top of the stack, or not. If you have objects of time during the rest of the project, they will always be on top of the slide background, but if you slide model objects, they'll be on top of the object of time during the rest of the project, unless you put that one always on top. You can disable to show slides on normal leaves model objects, separately from the power off from the slide background. Some of my ideas. For objects that I still want to be with the background, I'd prefer to merge. For objects that do not always, I will keep the separately and it is of course always the case for the button of interactive form that you cannot merge with the background (which is just an image, non-interactive).

    Lilybiri

  • Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

    I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

    I don't know which driver download for this problem.
    If anyone can help it will be much appreciated. I am running windows Vista x 86.

    Hope helped photos

    Hello

    The first error message said nothing; He only says that something is wrong on the HARD drive.
    Why you n t pres the button Don t ask me once again this problem?
    It seems the message again using this option?

    On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

    On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

    Check it!

  • Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

    Dear Sir

    Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD ID

    I am in a field & I'll migrate with a domain name.
    EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.
    data servers are also migrating with the new domain.
    is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.
    Kind regards
    Chauvet J.

    Hello

    The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

    http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • I can't uninstall microsoft silverlight. I get the message that I need to check with the installer of the hotfix package.

    Original title: microsoft difficulty 50747

    I can't uninstall microsoft silverlight. I get the message that I need to check with the installer of the hotfix package. Pls help!

    Hello

    Because the problem is related to Silverlight, I suggest you post this question in the Microsoft Silverlight forum.

    http://forums.Silverlight.NET/forums/

  • Satellite P300-150: Boot xp-vista & only 3 GB of memory with the xp

    Hello

    I have a Satellite P300-150 and I have two problems:

    (1) I install XP in my second partition and I can't boot to vista, I can start only for XP

    (2) I have install Windows XP Pro SP2, but Windows only shows 3 GB

    Thank you
    Fotis

    Hello

    > 1) I install XP in my second partition and I can't boot to vista, I can start only for XP
    The problem is known to me I installed the XP too on my laptop and after installing XP, I was not able to start the Vista because XP destroyed the Vista boot Manger!

    If you need now a Microsoft Vista DVD original (not Toshiba DVD recovery) and you should boot from the Vista DVD. This allows to repair the Vista Boot Manager.
    Then, you will be able to boot into the Vista operating system. Then, install the free tool called EasyBCD.
    This tool allows you to change the Vista Boot Manager and add the XP operating system to the Boot Manager.

    (> 2) I install Windows XP Pro SP2, but Windows only shows 3 GB
    I guess that your XP is a 32 bit OS and so he can see only 3.2 GB due to the limitation of the 32 bit OS.
    More details you can find on the Microsoft page

    Good bye

  • I have vista, want to move to 7 but need to save on the hard drive content; Please suggest how I rub off the coast of virus, evil & spy when recording off content before loading of 7... ?

    OS: Vista home prem

    h/w: Dell Studio w/Centrino core 2, 2 GHz, 4 GB ram

    I want to rub the data as I save to an external hard drive, and then reload the OS with 7.

    Don't know what to use as a scrub tool and how to perform the backup off with scub.

    Please notify

    Hello

    1. which version of Windows Vista is installed on your system?

    2. you try to upgrade from Windows Update?

    First of all, I suggest you perform a scan complete antivirus on your computer and make sure your computer is free from Virus or malware.

    Method 1: Run a virus scan

    I suggest to download the Microsoft security since the link Scanner and performs a search on your system. Check if the problem persists.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: Microsoft safety scanner ends ten days after downloading. To re - run a scan with the latest definitions of anti-malware, download and run Microsoft Safety Scanner again.

    Now you can transfer your files by using Windows Easy Transfer

    Method 2:

    Step 1:

    I suggest you to Windows easy transfer to download and install it to transfer files on a hard drive.

    http://www.Microsoft.com/download/en/details.aspx?ID=14179

    http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

    Step 2:

    Know if your PC can run Windows 7

    http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

    Step 3:

    To upgrade Windows Vista to Windows 7, follow the link below.

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7

    http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom

    Note: If your edition of Windows Vista can not be upgraded to the edition of Windows 7 that you want to use, you can always install Windows 7 using the custom to place installation option. However, the custom option keeps your files, programs or settings.

    It will be useful.

  • My Windows Vista HOME Premium stops when connecting with the text "Waiting."... "after SP2 re - INSTALL

    Hey guys that I need help, my pc stops at the logon screen, I reinstalled my SP2 and when I tried to enter this problem started, so what can I do?

    My screen says "Waiting."... "after 3 o 2 seconds, it turns off and after 2 seconds my screen goes black, after that the screen will appear again with the login screen saying"Waiting. "... »
    This problem only occurs when I try to enter in normal mode
    when im coming in "Safe Mode" the "Waiting...". "disappeared...
    Sorry for my bad English.

    Hello

    -Did you change your computer, after which the question began?

    If it starts on the desktop in safemode, I suspect involvement of conflict of software of third party causing the problem to occur. I would like you to put your computer in a clean boot State. Clean boot helps eliminate conflicts of third party software.
     
    Note: Follow step 7 to your computer as usual.

Maybe you are looking for

  • The latest version of Java is always a security risk?

    According to the link in the plugin manager defined as insecurity, it points to a bug reported nearly 4 years report and the status says it has been resolved. So if it's that old and marked as solved why he always class plugin not secure? I understan

  • Cannot find the app on my HP Officejet Pro 8500 a eFax

    Cannot find the app on my HP Deskjet Pro 8500 a eFax. For the eFax Webside only the eFax more and Pro services are available. The eFax free service not exisst more? See you soon Michael

  • kb2596615 causes ade to failure, error was 459: object or class does not support the set of events

    A couple of my users started getting our application error messages ade grown after you apply this update. Everything is well after its withdrawal. First mistake was 459: object or class does not support the set of events. Basically, no event has wor

  • CyberLink; Dvd9: Cannot sign in or register.

    When trying to connect / register a message happens;-"...". cannot access the web page you requested because your default browser is currently disabled. "How can I fix this little problem?  What is my default browser?

  • My windows vista installation get stuck

    Hello I have a new hard drive and need to install vista on it. I used recovery dvd of vista comes with my pc and install the get to the stage of completion, but it stuck there for like 20 minutes, and suddenly a black screen thereafter, a film of him