100 M175nw MFP Color LaserJet printing problem

When I print a page, there is a separate area on the printed page that looks like a plastic clip or other object blocking the toner onto the paper. It does in black and color.  I want to know if it is likely to beinside the cartridge toner or some other problem before replacing the cartridge. It is fairly constant in the location on the page.   I printed a blank page with lid open and the image was all black except for the object that resembles a plastic clip. It is about 1 inch long on each side and U-shaped. It looks like a big plastic clip.  The plate is clean and nothing on the glass.

I disassembled the printer and found a piece of paper stuck on the drum. That's what I suspected, but didn't know if it was a piece of plastic or paper.  She was part of a score of postum old and sticky to fix on the drum.  He is currently working.  Thank you

Tags: HP Printers

Similar Questions

  • 100 M175nw MFP Color LaserJet: Try to install the HP software, msg stuck like "Check 'HP LaserJet SW OSX Mavericks'..." »

    I am trying to install the complete package HP for my page printer (http://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-100-color-mfp-m175/4208157/model/420...).  Successfully, I downloaded the software and double-clicked.  The installation program launches and said verification ' HP LaserJet SW OSX Mavericks '... and he's here.  The progress bar is not updated; It is just there for ever.

    I have the printer physically connected via the USB port.  I would like to configure to work via WiFi, and I want to be able to use the features of the scanner, as I have in the past through Windows.

    Hi @Loroki,

    Thank you for joining the HP Forums!

    I appreciate that you try to install your printer HP LaserJet 100 Color MFP M175nw on Mac OS X 10.11 El Capitan. And I'm happy to help you!

    To confirm that the hardware of the printer is functional, you are able to print a configuration report? Print a Configuration report.

    In the meantime, please, try the procedure described in this guide, printer not found during Network Driver Setup (OS X)and let me know the results!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this guide helps!

  • Where can I find drivers OSC Lion (10.7) + HP software for my new pro 100 M175nw MFP Color Laserjet?

    HP support article says they should be available for down load an Apple software up to date, but when I load down and try to install I get a message that they are not compatible with 10.7. I can get the printer to woirk well as AirPrint but want to print on my wired network and also to use the scanner on the network.

    Hi, download and install the Lion full feature software below:

    http://FTP.HP.com/pub/softlib/software12/COL41269/kJ-100566-1/HP_Lion_LJ_SW_v12.13.26.dmg

    After completing the installation, make sure to install HP was last updated by clicking the Apple icon, then click on software update and make sure to select any update HP available.

    Kind regards

    Shlomi

  • LJ 100 M175nw MFP color image deformation

    I have images distorted on paper. I scanned one for you.

    Do I suppouse to replace ImageDrumDrumTitle 126 (CE314A)?

    What do you think?

    Thank you.

    Sorry for my English.

    The case is solved!

    Problem was in the piece of paper stuck inside the right side of the printer Image Drum.

    So, I take it out when out the Image drum.

    Thanks, Gemini02, for your attention!

  • M277dw MFP: color laserjet pro problems of m277dw mfp with access LAN on Mac OX El Capitan

    Impression on the local network with MAC OS causes problems with intermittend. Somethimes it works, often if you use after the first impression of another pc or lap top no printing is possible. Sometimes the errormessage "oder impression was not accepted" takes place. The same problem exists with the option of analysis.

    If the printer is connected via an Ethernet cable, then:

    1. On the printer, click Setup.
    2. Click on network settings.
    3. Click on restore by default.
    4. Turn the printer off and on again.

    Please let me know if this can help with your network issues.

  • Helps with the size of the paper M1176n MFP HP laserjet printer/scanner color

    I've just set up my new printer - HP MFP M1176n color laserjet printer/scanner.  I am based in the European Union and we use paper A4 - but for some reason, it seems to be the impression in a format suitable for American paper size.  Can anyone suggest how to change that?  It's almost as if she makes the smaller document to fit on what would be the American paper size.  But I use A4, and so there is a gap at the bottom of the page?  Thank you, S

    @Simon2014

    Did you enter M176n instead of M1176n?

    Click on the HP Printer Wizard and select game Preferences. The HP Print Wizard should be present if you have installed the full features of printer software and driver.

    You can change the printing options in Windows to change the paper size by default for the metric equivalent.

    be sure that you save the changes to the default paper size to A4.

    I have a HP HP Envy 120 loan which is an American model. It was provided to me for free by HP to allow me to help answer questions printer.

    I live in the European Union and use A4 paper.

  • m276nw: have a Color LaserJet printer use / print on Photo paper?

    Hello HP support.

    Although you notice that I have a few questions, since the store representative say yes to everything and barely even know the answer.

    My Question is I have a lot I mean a lot almost 1,000 sheets of paper Photo HP since a few year and decade back wasa good sale and just discovered recently hidden in my HP demo day I presented.

    * Anyway would like to know if I can use this paper HP Photo in my m276nw?

    Also HP Color LaserJet printer normally manage and work with HP Media products so if I buy another printer in which I am looking around for another AIO hope to do everything.

    I have Premium, matte, bright & Brochure paper Glossy Photo - HP makes a lot of types of Photo paper I could use them?  Since then, he does not say Laser or inkjet on the box.

    Sure I'll reach out incase I have an another question

    Thank you

    www.iOSGenius.com

    Hello

    It supports papers photo as indicated:

    http://support.HP.com/au-en/document/c03315988

    But given that the documents are old, the quality can not very well. HP produces special photo paper for Laser printers.

    Kind regards.

  • M177fw MFP: Color Laserjet MFP M177fw Pro do not leave the page logo star HP & energy and go to the home page

    I have a HP Color Laserjet Pro M177fw MFP multifunction printer.  When I power on, I get the HP & Energy Star logos on the touch screen of the printer, but then it crashes and the screen lights up.  My MacBook Pro will see the printer (I'm wired to it via a USB cable) and it will start to print, but crashes at halfway trhrough sending data from the computer to the printer.  Is there a way to reset the printer to its default settings (first anniversary)?

    Hi Audiomic,

    I can provide some measures that could help solve the problem.

    1. try to reset the printer. Powered on, unplug the power cord from the back of the printer, then wait 60 seconds. Reconnect the power cord to the printer and turn it back on the power. Wait for the printer to initialize.

    2. If the problem persists, try to download and install the latest version of the software package. The most recent update is 20160525.  You can find the update here. Click Download and follow the instructions to install the update via the USB port.

    3. If the update does not work, I recommend this HP forum thread going and asking that the support agent send you instructions to perform a NVRAM reset.

    This last step is the only way I know to do a factory reset if the screen is frozen.

  • MFP HP laserjet printing 1536dnf keeps

    Hi Admin,

    I currently work as a level entry COMPUTER Support, and I have a problem with the HP laserjet 1536dnf MFP that I can't give the time to understand why.

    Here's what I have:

    System: WXP Pro SP2 v2002

    Material: MFP HP laserjet 1536dnf

    Device Manager driver: scanner HP LJ M1530 series ; Driver date: November 16, 2009

    MFP HP laserjet 1536dnf print keeps JZJZL () and various random characters garbled, I can only print if I turn it on and restart.

    Another question: is there a way to stop all that is printing to the HP Toolbox.

    Thank you..

    I am sorry, for a very late response.

    I've already solved the problem and the scenario is like this. There was old installed printers and some PC print it to the old printer, having the same IP address, HP Laserjet MFP receives and print it with the characters of gaarbled.

  • Transfer Kit HP color laserjet 5550dn problem

    When I recently replaced my image transfer kit on my desktop HP color laserjet 5550dn printer, I had a slight problem.  The left hook that contains the transfer kit is stuck in vertical position instead of at an angle of 45 degrees outward.  How should I do?

    Kind regards.

    Take a screwdrver a gently down to the "open" position.

    Kind regards

    SD-86

    I work for HP

  • Color laserjet - printing even if a cartridge is low color strength?

    Have a color laserjet (CM1415fnw) multifunciton. I get the warning that my Cyan cartridge is low and must be replaced. I get this message for some time, but yesterday the printer "decided" that it would be only print in black. I'm assuming that the firmware of the printer forces black only print when a color cartridge is too weak to "notice" the printer. Is there a way to defeat/override it?

    I have the same problem as any computer, I use so I don't think it's a driver or configuration problem. I tried to adjust the warning on the printer at 5% level, but that did not help. I don't change anything else in the printer menu. Is there a setting that forces black (grey levels) that printing on the printer. Maybe somehow he has set wrong? I have disabled the function of levels of grey in my computers to the printer driver is configured to print in color.

    I do very little color printing and I really don't like if the colors are not "perfect". Also, I'm the 'warning - replace cartridge' on my black cartridge for about two months before the print quality has declined to the point that I needed to replace the black cartridge. In other words, the 'warning' seems premature. I'm sure that it allows to sell HP cartridges, but it would be nice if the printer let me decide when to replace and not forcing me to black printing only.

    Finally, I tried turning the printer and the computer power. Also, I took the cartridges, shook the and them reinserted. It did not help. The printer refuses to print in color.

    Thank you

    -Simon

    Clarice says:

    A hope you don't ask me that!

    Looked in the manual for your machine and haven't seen a thing to help. I suspect, like most printers that print in color, your model must all have cartridges in and properly functioning seized wil even attempt to print. (There are a few inkjet printers which print mode "backup", using one of the two cartridges).

    Sorry no better news for you, but feel free to check the manual in case I missed something. This thing is huge!

    Mary-

    Thank you!!! Eureka... it worked. Thanks for your suggestion to look more closely to the guide to the printer.

    Page 21 (see page 20 - system configuration Menu) there is an element called "very low." Go to "Color cartridges" and set this item to "Continue". Forces of printing color no matter how little the cartridges. (The system default is 'Black Print' which I'm sure that HP help sell more cartridges color long before they needed to be replaced.)

    This saved me at least a few hundred dollars in the purchase of new color cartridges until I really need them! Thank you very much.

    -Simon

  • Color HP Color Laserjet 2500 problem

    Helloo!

    I have a problem with my HP Color Laserjet 2500. I use Windows 7 Professional 32 bit computer. Installed the driver from the hp support, because the CD that came with the printer, is only for XP / 2000/me etc. I've tried both, the driver PC5 and PC6, still the same problem.

    I can print, but I have a problem and a few questions.

    Problem: Sometimes it only prints yellow, sometimes only magneta. Sometimes, it combines blue and magneta and black and yellow on the leaves. And sometimes, it prints all colors. I could tell that almoust 50% of the time, it prints normally. When it doesn't, it prints as I have highest desicribed, in all the different possibilities, sometimes does not print Yellow not, magneta, blue or black. Sometimes it does not print two colors, rearly prints only 1 color and even more rearly (happened about 2 - 3 times) it does not print anything. He has for years a problem since I have it connected to the computer with Win7, but initially, it worked great. Then sometimes he screwed 1 document for a moment, then 2, then 3 in a week. But now it has little more than 50% of the documents that it messes up.

    ABOVE 1: it seems that when I choose printing preferences in the computer, it displays a different language, I think it is Arab! Written from right to left. How can I change this?

    Qouestion 2: I can't find my product serial number. When I print the configuration page, it says printer serial number: CNHDD06356, but when I post in the HP Chat Support, it gives me error. What am I supposed to do?

    If solve you my problem, I buy you a beer when we meet!

    PS. what I tried:

    Cold reset.

    Different drivers.

    New wireless USB from the printer to the computer.

    All cartridges have more than 40% of ink in them. Black 44, 97, 76 and yellow magneta 97% cyan.

    Imaging drum is practically new, shows 93%.

    Clean the printer inside.

    Added a little WD40 on the moving parts.

    Now, I hope you can help me...

    Hello again!

    I SOLVED IT!

    Who has ever, when the function will have the same problem, here is how I fixed it (sorry for my English not so good):

    I googeled a little more and found a topic in a forum:

    http://www.fixyourownprinter.com/forums/printer/68382

    http://www.fixyourownprinter.com/forums/printer/63372#1

    And then I saw a video here:

    https://www.YouTube.com/watch?v=9BoxmagIjhg

    What I did:

    Taken apart from the printer. All the plastic covers. I think that I had to only take 2 screws, at HEC, blankets. I not only took down of it where you put the paper in the coverage, I have has no need of.

    Coverage where you put the color inside was tips. The cover communicates with the other gear, so you have to remove it. To remove it, there is this small black gear inside the printer. In the center of the gable, there is a buttonish thing, you'll have to push in the side, from the Center to the periphery to remove the sprocket and then you will be able to remove the plastic cover.

    Then I did as it is shown in the video:

    https://www.YouTube.com/watch?v=9BoxmagIjhg

    You will need to clean this thing "solenoid". I used a small knife to scrape two parts index. He was supposed to be a felt, but I don't have it anymore, and it is wat was caousing it.

    IMPORTANT: My feelings of the solenoid was cone so I replaced it with Ribbon. I cut a little drops out of an adhesive and clued/wrapped ribbon around the solenoid. It is recommended, however, that you idea a little felt back in there, but I didn't, so I used Ribbon.

    Then I put all the pieces together and it worked!

    You can not believe my happiness, when he began to print each document correctly. I had this problem for a while, and incredibly, it worked.

    If you have the same problem, I hope that this trick of yours will also solve.

  • LaserJet M1217nfw MFP: HP laserjet printer stop printing after the change of internet provider - solution: Reinstall...

    Hello

    my all-in-one HP laserjet has worked on my computer laptop windows 7, via a wifi connection, in the past;

    internet provider has recently changed, and since then, I can't install the printer so that it works continuously.

    After installation initial (via cable between laptop and printer), everything seems fine;

    I select "share with everyone".

    = > everything OK, everything prints, for two users.

    Problem:

    The next time myself or another user trying to print, just a few days later - nothing works anymore.

    NO error message;

    use of the printer is visible in the queue;

    printer is visible (and selected as the default printer) in "devices and printers" with a green check mark, but in light grey, as if idle.

    When (right) by clicking on "help", no error is found... but nothing prints, always.

    How can I avoid to do the reinstall whenever I want to print from my laptop?

    (Printing from my Tablet works great!)

    Would be very grateful for your help... Thanks in advance!

    Hi @KatLe ,

    I see that you have problems printing to different user accounts. I will definitely do my best to help you.

    I have provided a document for the definition of security permissions for printing to see if this will help.

    Can the administrator account on the computer printing, or were they also intermittent problems?

    Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

    What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

    If you need help, let me know.

    Good day!
    Thank you.

  • How to cold reset the printer Laserjet M175nw MFP Color 100?

    Try changing the settings wireless, but keeps on asking for a password that I don't remember.

    Printer works fine so hard connected to the network.  ePrint works very well.

    Just updated to the latest firmware available.

    I just need to change the wireless settings that I recently changed my password for wireless network.

    In addition, access to the menu is disabled from the control panel of the printer.

    So the only way that I can think of is to reset the printer and start the installation from the top.

    Thank you.

    Hello

    You must perform initialization of storage generally in order to remove the password configured in the fuly, any other reset will not erase this kind of configuration.

    In order to perform this reset, you should contact HP Support.

    You can get the details to contact HP by selecting your region and following technical support after purchase below:

    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    Kind regards

    Shlomi

  • Color laserjet 4600 - problem with one color (yellow) for the most part does not print

    Colors look purpleish when printing photos.  It turns out that this is a problem with yellow print.

    We tried to replace the yellow toner cartridge, and it was not fixed.

    PQ troubleshooting, the yellow page is empty except for a thin (16th of an inch) to 99% a horizontal line at the top of the page.

    In the configuration page, all the different areas that should have the yellow are mostly empty, with the exception of the same sort of thin horizontal line at the top of each of these areas.  After updating the firmware from 03.001.0 to 03.016.0: in addition to what is described on the configuration page, some of the fields in the configuration page that should be yellow, have a pale magenta and more this yellow line.

    Our technician came several times and has so far tried to replace the hvps, scanner laser, toner alignment and trainer kit Board.  Nothing has improved the question.  Then for the replacement is the regulator dc ($1000).

    Anyone here have an opinion on what could cause this problem?  It seems they are just throwing parts at home and we're about to tell them to give up.

    It wasn't the dc controller.  I figured out well out - somehow, there was a spring missing behind one of the speeds in the train of drum roll.

Maybe you are looking for