100 M175nw MFP Color LaserJet: Try to install the HP software, msg stuck like "Check 'HP LaserJet SW OSX Mavericks'..." »

Similar Questions

• Where can I find drivers OSC Lion (10.7) + HP software for my new pro 100 M175nw MFP Color Laserjet?

  HP support article says they should be available for down load an Apple software up to date, but when I load down and try to install I get a message that they are not compatible with 10.7. I can get the printer to woirk well as AirPrint but want to print on my wired network and also to use the scanner on the network.

  Hi, download and install the Lion full feature software below:

  http://FTP.HP.com/pub/softlib/software12/COL41269/kJ-100566-1/HP_Lion_LJ_SW_v12.13.26.dmg

  After completing the installation, make sure to install HP was last updated by clicking the Apple icon, then click on software update and make sure to select any update HP available.

  Kind regards

  Shlomi

• 100 M175nw MFP Color LaserJet printing problem

  When I print a page, there is a separate area on the printed page that looks like a plastic clip or other object blocking the toner onto the paper. It does in black and color.  I want to know if it is likely to beinside the cartridge toner or some other problem before replacing the cartridge. It is fairly constant in the location on the page.   I printed a blank page with lid open and the image was all black except for the object that resembles a plastic clip. It is about 1 inch long on each side and U-shaped. It looks like a big plastic clip.  The plate is clean and nothing on the glass.

  I disassembled the printer and found a piece of paper stuck on the drum. That's what I suspected, but didn't know if it was a piece of plastic or paper.  She was part of a score of postum old and sticky to fix on the drum.  He is currently working.  Thank you

• whenever I try to install the new software on my computer goes to a blue screen and stop making

  Original title: HELP!

  whenever I try to install the new software on my computer goes to a blue screen and stop making

  Hello

  It takes a lot more information

  What operating system

  etc.

  read this

  How to ask a question

  http://support.Microsoft.com/kb/555375

  -What you trying to do?
  -Why are you trying to do?
  -Do you try already, why and what was the outcome of your actions?
  -What was the exact error message you received?
  -How long have you been experiencing this problem?
  -Have you searched the relevant forum/newsgroup archives?
  -Have you tried all the tools or KB articles or other resources?
  -Have you recently installed or uninstalled any hardware or software?
  -What changes have been made to the system between the time where everything has worked, and when you noticed the problem?

• When you try to install the printer software, I get a VC80. Error CRT

  Error messages

  When you try to load the software for the HP Deskjet F4400 I just bought, I got an error message of Microsoft VC80. CRT, processor Architecture = "x 86", the key public token = "If c8b3b9a1e18e3b", version = "8.0.50727.91" type = "win 32", does that mean? I am not computer savvy and I have no idea how to fix. We receive many messages of error with this computer I don't know how to fix.

  Computer HP laptop Pavilion Entertainment PC model dv2 - 1028ca

  Hello

  Follow these steps:

  
  Step 1: download and install: Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

  
  Step 2: browse the location c:\windows\winsxs folder and rename the folder winsxs to winsxs.old.

• Try to install the fax software Toktumi on win xp pro 64-bit

  Error title bar - biinst.exe point of entry not found - the procedure entry point - Wow64DisableWow64FsRedirection could not be located in the DLlibrary.

  We have ideas?

  Thanks - Doug

  Hi Doug,.

  Follow these methods.

  Method 1: Install the application as an administrator.

  HOW TO: Use the RUN AS command to start a program as an administrator in Windows XP

  http://support.Microsoft.com/kb/305780

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

• "To install the software, you must log on as a member of the Administrators group" when you try to install the printer software

  Original title: Installation software error

  I am trying to install a wireless printer Canon on my new laptop Dell with Windows 8 but I get error: to install the software, you must log on as a member of the Administrators group.  I'm naïve - I'm the only person who uses this laptop and have used the one and the only password for the connection.

  Solution... for me at least:

  (First of all, copy the installer to a flash drive)  I use Windows 7 Enterprise and have tried many combinations to run the installation program. The bit end who works is to restart the computer, connect to the machine as an administrator or another local user on the computer that is part of the local Administrators group, THEN Rclick Installer and run as administrator.

• LJ 100 M175nw MFP color image deformation

  I have images distorted on paper. I scanned one for you.

  Do I suppouse to replace ImageDrumDrumTitle 126 (CE314A)?

  What do you think?

  Thank you.

  Sorry for my English.

  The case is solved!

  Problem was in the piece of paper stuck inside the right side of the printer Image Drum.

  So, I take it out when out the Image drum.

  Thanks, Gemini02, for your attention!

• HP Officejet Pro 8610: Try to install the full software concludes printer, but the IP address is the address of the router, not the printer

  I tried several times to remove printer, uninstall the drivers, reboot, reset the printer to the factory, etc. without success.  I even went into the registry and deleted the printer reference as much as I could.

  Please note I know how to connect the wireless printer and did successfully to the router with IP 192.168.1.108.   The problem is that the installer will search for a printer on the network and detects the 8610, but it appears with the IP address 192.168.1.1, which, of course, fails to install correctly.

  How can I get the dialog box to see the printer with the CORRECT IP ADDRESS?

  Well, I gave up trying to connect wireless and connected the printer with an ethernet cable.    Re-installed software that went much smoother, but still showed printer with IP router when you try to add it.   I chose "other devices" and is manually entered IP ethernet.

  Everything works now, including scanning.

  I think that the new router (for satellite internet) blocking a port that is required to complete the driver installation.   I had to add a switch to have an additional ethernet port to connect the printer.

  It was NOT a good experience.   I had a lot of practice of deleting, downloading, installation, configuration of the HP printer again and again well, therefore perhaps not all a lost cause.

• Try to install the printer software, but it says cannot find Serscan.sys

  I'm trying to get an HP printer to work.  The software will not end because it cannot fine Serscan.sys.  As far as I know all my service modules are underway.  How can I get Serscan installed?

  I have no more drive.  I'm sol?

  I'm not clear on the problem now. If you can find Drivers.cab in the c:\Windows\Driver Cache\i386 folder, then you should be able to look inside the it with something like WinZip or WinRAR and extract the SerScan.sys file on a location that can reach the installation of HP.

  By the articles in the Microsoft Knowledge Base, I know that there are two legitimate versions of SerScan.sys, one for XP SP2 (ver. 5.1.2600.3029) and the other for XP SP3 (ver. 5.1.2600.5612). You need the right version for your own XP, so getting the Drivers.cab file on your own machine is the best method.

• When I try to install the flash software does not let me log

  do not let me connect when it starts to install

  If you are on a Mac and you see a dialog like this:

  

  Enter your computer username and password, not your information from Adobe.

  If this isn't the issue, let us know more about what you are trying to do will help us better solve the problems. What is your operating system? When you say you are trying to install Flash, you average Adobe Flash Player or Adobe Flash (Adobe animate) and what version?

• I just bought a Logitech Web c110 camera and every time I try to install the installer crashes. Also, I was making the blue screens with different messages on them.

  Original title: how to find missing or corrupt files on windows xp pro

  I just bought a webcam logitech c110 and whenever I try to install the installer breaks down and I was doing the blue screens with different messages on them... How to scan for missing or corrupted files?  My brother-in-law has built this computer for me and I did not all disks for windows xp pro. system that is on it

  Hello

  1. you receive an error message while trying to install the webcam? If so, then post back the exact error message.
  2 are you able to install any other software?

  Try to capture the error message on blue screen and after return the exact error message. This could help us help you better.

  Step 1: Try to install the webcam software in clean boot state and check.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Error code: 0 x 800700002, does not have support for the installation package ' Vista SP2 MBR Update, installing the Zune software for windows phone 7

  Original title: could not find the media to the installation package ' update of Vista SP2 MBR

  I need to install the Zune software to my windows phone 7 and I get this error message: cannot find media for error code installation package 'Vista SP2 Update MBR' 0 x 800700002. Please tell us what to do.

  Hi PamelaMaassen,

  You can read the following article and check if it helps:

  A required component cannot be installed when you try to install the Zune software

  http://support.Microsoft.com/kb/944938

  If you're still having problems, then post your query in the connection of support Zune for more assistance:

  http://answers.Microsoft.com/en-us/Zune.aspx#tab=1

  Hope this information is useful.

• When you try to install the HP Laserjet 1300 printer error there is a problem installing this hardware.

  Original title: HP Laserjet 1300 Windows XP, SP3 error installation

  When you try to install the HP Laserjet 1300 printer, I get the following error message and the process stops and restores.

  CANNOT INSTALL THIS HARDWARE

  There was a problem installing this hardware

  HP Laserjet 1300 PCL 6

  An error occurred during the installation of the device.

  The specified Module could not be found.

  I have used the original printer installation cd, bought a new cd from HP and downloaded the drivers directly from the HP Web site and I get the same error.  The record show error install printer on each attempt of events. Can anyone help?  Thank you

  Hello

  You are able to install other programs?

   

  Method 1: See the following article:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02073861&LC=en&cc=us&product=3795406

   

  Method 2: view the following steps and see if that helps.

  (a) disconnect the printer

  (b) uninstall the software and drivers on the computer

  (c) plug the printer back

  (d) allow the Hardware Wizard search for drivers

  e) if it does not, it asks you to install the source for the drivers, the installation driver CD and install the drivers and see if that helps.

• I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me?

  I try to install the Kodak ESP C310 printer, but it is said that a firewall is not blocking the installation. Can you help me? I use windows XP. I tried port 5353 and this is what allows to Hello.

  You can check this article, but it's about Firefox itself do not have access.

  http://KB.mozillazine.org/firewalls

  Could you give the exact wording and punctuation of the message and try Googling yourself - when google you do not without importance and punctuation, words of group who are always together as original in quotation marks or hyphens message that google will look for these words together in that order.