100 Pro and Pro Premium matte paper

Pro-100 printer, Windows 7 and Canon Photo Paper Pro Premium matte paper. No matter how I try to set up this combination, I get nowhere. First the printer tells me that I have to use the manual of food, OK I've put that to the top. then he tells me that I can't use Photo Paper Pro Matte in the 8.5 X 11 (letter size) and give me several sizes to use, with a 8.5 x 11, but it will not be printed. I had the same problem, I try to print size 13 X 19 inches. Any ideas?

Thanks in advance

If you use Matt paper Premium, you must select the Fine Art paper option that must be printed from the manual feeder.

Tags: Canon Printer

Similar Questions

  • Profile of Pro - 1 for "Photo paper Premium Matte"

    Just got a Pro-1 and a few packets of Canon "Photo Paper Pro Premium, Matt" were included in the agreement. Installed everything, say the instructions with the paper "select"Photo Paper Pro Premium"" Matt for the media Type setting, but I don't have this profile. Here are the profiles I see installed in CC of Photoshop, Photoshop CS 4 and 5 of Lightroom:

    Canon PRO - 1 v1-1 new 2/3 Fine Art Paper Photo Rag
    Canon PRO - 1 v1-1 new 2/3 Fine Art Museum Etching
    Canon PRO - 1 v1-1 new 2 other Fine Art paper 1
    Canon PRO - 1 v1-1 new 2 other Fine Art Paper 2
    Canon PRO - 1 v1-1 new 1/2 other glossy paper
    Canon PRO-1 v1-1 new 1/2/3 Photo Paper Plus Glossy & gold
    Canon PRO - 1 v1-1 new 4 Photo Paper Plus Glossy & Gold
    Canon PRO-1 v1-1 new 1/2/3 Photo Paper Plus Glossy II N
    Canon PRO - 1 v1-1 new 4 Photo Paper Plus Glossy II N
    Canon PRO - 1 v1-1 new luster paper Photo 1/2/3
    Luster paper Photo Canon PRO-1 v1-1 new 4
    Canon PRO - 1 v1-1 new 2/3 paper Photo Mat
    Canon PRO - 1 v1-1 new 1/2/3 Photo Paper Pro Platinum
    Canon PRO - 1 v1-1 new 1/2/3 Photo Paper Plus Glossy
    Canon PRO-1 v1-1 new 4 Photo Paper Plus semi-Gloss

    I don't think that generic matte photo paper is the right profile.

    I thought that maybe I needed to plug Print Studio Pro installed, but that was of no help. And trying to use Print Studio Pro has been no help, he opened but just sitting and cycled in CS4 and Lightroom, never reached a point where I could do something with it. It is never installed in Photoshop CC.

    The Canon site search not found me an for this article standalone ICC profile. What Miss me? Thank you.

    Hi Evildad,

    Photo paper Premium matte paper can be selected in the printer driver.  To do this, please follow these steps:

    1. click on start and then Control Panel.

    2. click on printers.

    3 right-click the PIXMA Pro-1 and click Printing Preferences.

    4. click on the main tab.

    5. next to media Type, please click on the dropdown menu, point to fine arts papers and click on Photo Paper Premium Matte Pro.

    6. click on apply and then OK.

    If you continue to have difficulties, please contact our support group by using the following link:

    http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  • Why my PRO - 100 black-and-white prints have a color tint?

    I print out on the printer PIXMA Pro-100 and sometimes, for no apparent reason (?), my black and white prints have a color tint (generally a "reddish brown"), then when printing to new... same settings print, same... the same impression will be fine, neutral with no tint at all.

    No idea why?

    Also (perhaps related?) I do not understand why Photo-Cyan and Magenta cartridges are exhausted when I'm NOT print color, but only black and white.  Am I missing something?  When you set up for printing, I always make sure that the 'Black and white photography' feature is selected in settings dialog "Quick Installation".  This ensures not only the black and gray inks are used as long as I'm not "toning"?  In other words... ONLY black and gray inks are used, if not the impression that is supposed to be a black and white printing neutral? Yet once... I missed something?

    FOR INFO:

    I print on Canon Pro radiance papers and more glossy.

    Under 'Options - color management', I selected:

    (color management) Photoshop Elements handles colors

    (image area) Adobe RGB (1998)

    (the printer profile) Canon PRO-100 1/2 Luster Photo Paper Pro

    (rendering mode) Perceptual

    The most important thing is the paper you choose to print on.  Find this first release. Any Epson printer which uses UltraChrome K3 inks will do a better job with B & W as a Pro-(anything).  But Epson suffers from obstruction more far do, Canon Pro-100 problems.

    If you print a lot is not too big of a problem, but if you print once a week or once a month to forget it.  Go with Canon that clogged very rarely, if ever.

    Try to find the right paper.  It will make everything better.  Call the Red River or Canson and ask them to recommend a book.  Red River will work with you and they know the Pro - 100 inside and outside.

  • I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

    I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Office Jet Pro 8000 print quality is poor on glossy or matte paper.

    My printer is 2 years old.  Glossy is the verticals a (drum lines?) and greased and never heals.  On matte paper, it is dull and lack of color.  I tried a lot of papers.  Is this a problem of printer or paper?  If it's a problem of paper what paper should I use?  I need to print photos for my work to show to customers within a short period of time.

    About the default settings, can you go to print and the following information:

    Default paper Type/media type:

    Default paper size/media format:

    Print quality (Normal/best/best):

    Normally, if you do not specify at least the type of paper, the printer thinks it's printing on plain paper. The delivery of the ink is different for each different type of media.

    Try to adjust this setting and see if printing comes out better. If it (the problem) you can make a shipped printer scheduled for these parameters, so that whenever you print on paper (insert type/manufacturer of paper here), you can use the preset for auto-set the driver accordingly.

  • OfficeJet Pro 7740: Office Jet Pro 7740 Recgonition paper tray

    I have tray 2 load paper 11 x 17 and using the touch screen says printer 11 x 17 is loaded in tray 2.

    Tray 2 is not the set HP Preferences dialogue box in paper source Options paper '.  When I try to print using the printer Auto Select on paper 11 x 17 source I ger an error message on the touch screen that the incorrect paper size is loaded in Tray 1.

    I can copy 11 x 17 paper tray 2 tray 2 by selecting from the menu on the touch screen

    Running scan doctor or the restart has not solved the problem

    Thanks for your help

    Hello

    Thank you for using the HP Forums.

    The resource relevant next will show you how to put in tray 2 by default and with the good paper sizes:

    HP 8740 stand (installation and using the 2nd status bar)

    HP Officejet Pro 8730/8740: Install and use a bin by default to 'copy '.

    Let us know if this helps!

  • HP Officejet Pro 8615: Additional paper trays

    What is the difference between paper trays A8Z70A ad CN548A?

    What one do need me for my HP Officejet Pro 8615 and at what price, please?

    Hello

    HP Officejet Pro 861 x use only printers: Accessories HP Officejet Pro 250 sheets paper A8Z70Atray. You can buy:

    http://www.Amazon.com/250-sheet-tray-for-OfficeJet-Pro/DP/B00JERFGI6

    The CN548A Board is for 860 * series of printers.

    Kind regards.

  • Office jet Pro Premium 8600: print 2 sides

    I use a Macbook Pro OS X 10,11.3.  I also have on my computer Microsoft Office for Mac.  My printer (Office jet Pro Premium 8600) allows a 2 sided printing except if I try to print something from Microsoft Word.  When I try to print with Word, for 2-sided printing option does not appear.

    How can I make 2 sides print with Word?

    Hi @John52387,

    Thank you for your participation in the Forums of HP Support! I'd be happy to help you print 2 sides of the word. I suspect that you may need to select printing 2 sides in another program, and then save these settings as a preset impression. Once you have created this new preset, you can select the preset when you print from Word.

    Although the following Apple article says OS X Yosemite in the title, the instructions also apply to El Capitan: Save your settings to print to use later.

    Thank you. If you need more assistance let me know and I will gladly do whatever I can to help.

    If this resolves the issue, please click Accept as Solution button below to help others find what worked for you.

  • DMP 4400 G RS 232 connection with Cisco LCD 100 PRO 40N

    Hello world

    I know this question has been asked a little before, but I still have trouble affecting the DMM to control Cisco LCD 100 PRO 40N (Samsung) via the RS232 DMP connection!

    I searched and read every post on this forum, ('Samsung_MDC_RS232_Protocol_Ver - 21.pdf' & rs232.tx_hex =) tried but not vain.

    We have DMS VmWare demo (signs & Cast 5.2, Show and part 5.2) and 4400G with firmware 5.2.

    Also, I connected the series RS232 9 pin female to female that came with the TV on the DPM 4400 G and in the port RS232 TV, configured the DMP in the Task tab view control forward as you can see in the picture to set and define the type of TV for Cisco 40N and Power ON and another task for the display OFF. What I'm doing wrong here!

    Any input will be greatly appreciated!

    You must first activate rs232 on the DMP.  For Cisco views, use the system task called "RS-232: control supported, non-DMTech poster.  This will cause the DMP restart.  Once it has restarted, you should then be able to use the rs232 codes or the built in display of DMM controls.  I tested on the same Cisco display with cable included as has managed to turn the screen off and back on orders of DMM.

  • LCD-100-Pro-40N using as an external display

    Hello. I have installed CTS1300 and using LCD-100-Pro-40N as an external display.

    When I use previously third LCD (NEC LCD), I used DVI to HDMI cable between the telepresence and external display.

    LCD-100-Pro-40N must also DVI to HDMI Cable? Or HDMI to HDMI cable available since both are Cisco brand?

    Both cables may work, but Cisco recommends DVI-HDMI cable between codec and an external display.

    See you soon,.

    Hard

  • I can't activate acrobat pro premium design with production premium cs5 cs4 installed

    I can't activate acrobat pro premium design with production premium cs5 cs4 installed

    The error is

    need more product activation.

    Adobe Acrobat has been installed as part of a suite. in order for adobe acrobat, please start another component of this suite such as adobe photoshop

    I don't want to reinstall all CS4 CS5 is already installed. I want to just install and activate Acrobat 9 Pro

    I was able to activate this by installing Dreamweaver CS4. I hope that the components of the CS4 (e.g. bridge) will not interfere with the CS5 installed components previously.

    The problem is apparently solved.

  • New Pixma iP8720 set up.and printed a b & w gray on matte paper.

    Hello. I just set up my new Pixma iP8720 and make a first impression just to see if it worked. Of PS Elements, I printed a photo b & w/grey scale on Matt paper (not Canon). It seems OK, except there is a tint of cyan to it. Can I do to fix this?

    Thank you, Russell

    Well, I thought about it. Instead of selecting "matte paper" in the dropdown menu, I selected "other photo book" and unchecked "gray scale". I printed a color printing and a tonic b & w and a not b & w and they all came out great. No cyan shades! Printing b & w untoned looks pretty hot to it with this paper (Matt of 61lb Office Depot) black/brown background that I wanted in the first place. Just to see, I printed the untoned b & w once again, but with "matte paper" checked and he lost the tone b & b for a neutral look cooler. Both are acceptable. Thanks again.

  • Reference Dell backup and restore (Premium Edition) 1.7.5.63

    Since upgrading my software Dell backup and restore to version 1.7.5.63, I now have problems to make it past the "Dell backup and recovery Please Wait" screen.

    I'm not leaving this option to run for more than 8 hours, but found that this process is not always successful. The only way I could find to block this process to run is to click on the? at the top right of the screen, then select "activity log". At this time, I clicked on the home button to take back me to the Dell Backup and Recovery Premium Edition home page and close the application. However, when I tried to re - open the application again, it brings back me to the screen "Dell backup and recovery Please Wait".

    To solve this problem, I tried to restore from a previous backup I made of the Dell Backup and Recovery application but it failed miserably and corrupted my hard drive and operating system (Windows 8.1). So the only way I could get back to who had to go back to my backup bootable disks that I created when I arrived to my laptop Dell Latitude E6530.

    Then I had re-installed all the 100 + updates of Windows for upgrade to Windows Pro 8.1 by the Windows store. From there, I upgraded my software "Dell backup and restore (Premium Edition)" at 1.7.5.63 and had the same problem again.

    In any case to have a fix for this or tell me how I can raise an incident with Dell, because this is so ignorant and frustrating.

    If I uninstall my Dell Backup and recovery software (Premium Edition) and reinstall the version found in http://www.dellbackupandrecovery.com/en-us/Index.html , but the last time I did, it installed the basic edition and not the Premium edition.

    All right enough the last time I had problems with my Dell backup and recovery (Premium Edition) software, it seems to settle on the other updated after a few months, but I don't don't want really to go back to an earlier backup with an older version of the recovery (Premium Edition) software and backup Dell.

    Any help or advice, you would be extremely grateful.

    I'm shocked that Dell is detrimental to Windows backup in Windows 7 Professional.  Your comments here persuade me not to pay for the premium edition.  Various people on other internet research said Dell had a great program backup, 6 months ago, but weakened while it is able to sell a version Premium, also hobble the program backup Windows.  You might try a free backup software like Comodo as I suspect that you can not use the Windows backup which makes a backup with files image.  It was a very simple approach that Dell seems to have stuck in their new versions of Windows 7 Professional.  I restarted my computer because of this kind of game.  Since I bought it at Costco, I have 90 days to return it.  I also started watching a series of online backups.  Carbonite seems terribly clutter my computer, and while highly recommended, it is slow, slow, slow.  I am CrashPlan that seems to work much much much faster.  Both of these are paid services.  CrashPlan has a lot of versatility to accommodate beginners to evolve into something much more powerful.  They have free versions for recording to hard drives and other computers.  The online version has Unlimited storage, much versatility, without the limits other plans have, and it's only 4-6 dollars per month, depending on the current sales and payment terms.

  • Printing problems using the new premium photo paper more HP

    Unable to get the recent HP Premium Plus photo paper to print in my Photosmart always reliable 4780... tried to print using today our new of OfficeJet Pro 8600 and it would print in it either. This paper feels very different to me, and it seems that the paper is too smooth to be taken over by the printer. Ideas?

    Followed by all your links-made all tests... printed on several types of different paper... refine results... Put the new HP Premium Plus paper in... same old problem nor my 4780 or the new 8600 will feed this scum thru.

    Thanks anyway...

    Diana

  • Uninstall the trial version of CS6 design and web premium

    Hi all

    So, I downloaded CS6 design and web premium trial using the PDF reader. I downloaded from a different drive. Problem is that when I try to read a pdf file of the trial version blocking it. I need to uninstall the trial version and has read and understand how problem is it looks like he wants to uninstall all my programs CS6. I n ' want to happen then, it will uninstall my paid for CS6 programs if I do this? If so how can I get rid of this thing without him taking my programs with it. I have a Mac Pro that I bought and the programs were on it when I got it this is why I bought it. I don't have the disks if there were.

    Thank you

    You shouldn't have CS6 to read a PDF file.  Adobe Reader should suffice for that.  What about uninstallation is you should be able to select the individual application for removal, no matter what it is.

Maybe you are looking for

  • guys, anyone?

    Guys, it is advisable to use low-power mode even if it is not yet on 20%? What will happen then?

  • Adobe flash 14 (latest version) crashes every time in Firefox 30.0

    I have updated Firefox 28 to 30 in Firefox today. Anywhere requiring Adobe Flash will not work. No Youtube or same Speakeasy. Just the dreaded "Flash plugin crashed" notification. Everything has worked in 28 and add - it manager says my plugin is up

  • The CD/DVD drive does not work. When I put a disk in it just spits it not.

    Whenever I try to play a disc it just guard turn off. I looked back to see if the drive was working and he says he is. Well, then why are there no info on the disc at all? It won't even keep the disc inside it will push it over and over again. Please

  • Unable to boot Windows Vista past the Windows Error Recovery

    original title: girl in trouble Hello, my daughter has a DELL studio with Vista Home Premium 32 bit SP1, the problem is that it will not pass the Windows error recovery 'window' repair statup display a message "Startup Repair cannot repair this compu

  • HP C410a printer scan issues

    I have a HP C410a printer all-in-one.  I desperately need to scan documents on my computer.  When I try to scan from the printer, I get an error message that says: "problem of Scan.  Try to start the scan of the computer.  The problem is I do not hav