105-no supported device detected wireless broadband? I still got my card "Broadband"?

Similar Questions

• No device detected wireless network

  I installed Win 7 NSB my HP Pavilian dv8 and I get "no device detected wireless network" when I try to connect to the internet.

  Whaat shuold do?

  Hello:

  Please first install the chipset driver and restart:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-76994-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  Then for the devices you listed:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-87682-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75391-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-92370-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-76187-1&cc=us&DLC=en&LC=en

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-75414-1&CC=US&DLC=en&LC=en&os=4063&Product=4150052&sw_lang=

  Paul

• Unknown device detected during the insertion of the SD card on a Dell computer.

  Original title: ACKNOWLEGMENT of CARD MEMORY

  IS THERE A FILE THAT SHOWS MEMORY CARDS. I HAVE BEEN USING 2 DIFFERENT MEMORY CARDS FROM SANDISK FOR A WORK OF PHOTO NIKON D 7000. RECENTLY, I RECEIVED A PROMPT THAT A STRANGER (MEMORY CARD) DEVICE HAD BEEN DETECTED AND NOW WINDOWS DOWNLOAD TO TAKE PICTURES WILL NOT ACKNOWLEDGE RECEIPT OF SANDISK CARDS. I CAN STILL DOWN LOAD DIRECTLY FROM THE CAMERA THROUGH A USB CABLE. WHEN I TRY TO INSERT A MEMORY CARD DIRECTLY INTO MY DELL DOES NOT EVEN APPEAR.

  O / S: VISTA VERSION 6.0 SERVICE PACK 2
  Br: VERSION 9.0.810.16421IC UPDATE VERSION 9.0.2 KB2559049

  Hi Willy,.

  You can try these steps and see if it helps.

  Step 1:

  You can try reinstalling the SD card and see if it helps.

  a. Click Start, type devmgmt.msc and press to enter.

  b. Locate the device name in the list of Bus USB controllers.

  c. If you see the item on to the SD card, right-click on it and click on uninstall.

  d. restart the computer and check if that helps.

  Step 2:

  You can also format the SD card and see if it helps.

  You can make a backup of the data and format the SD card.

  For more information on the 'formatting of disks and readers' visit this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/formatting-disks-and-drives

  Hope this information is useful.

• My laptop cannot detect wireless networks after using the Windows Update service. Technical support, very desperate need.

  I tried the direct technical support, but it seemed to have cut. Given that I can no longer connect to the internet on my laptop, I'm with my playstation browser and painfully by typing with the controller.

  My probllem.
  I have an ASUS Intel Core i3 - 2350M CPU @ 2.30 GHZ running Windows 7 home premium. I've selected "Windows Update" in the start menu and proceeded to download and install all updates. Once the updates have been installed, my laptop couldn't detect wireless networks which means that I can't connect to my router and have lost the internet.
  Device Manager indicates 802.11n Wireless LAN Card is working properly.
  Windows did create a restore point before installing the updates, but everytime I try a restore I get the following message
  "System Restore has failed. Your computer's system files and settings were not changed
  Details
  System Restore could not access a file. This is probably because an antivirus program is running on the computer. Temporarily disable your antivirus program and restart System Restore.
  An unspecified error occurred during the restoration of the system (0x80070005)"
  "I disabled anti Virus AVG and COMODO firewall only to receive the same message, and it now appears that the restore point disappeared as if by magic, saying system restore ' no. restore points were created.
  Updating installed Windows the following
  Microsoft .NET Framework 4.5 1 4.5.50938
  Microsoft Office Home and Business 2010...
  Service Pack 2 for Microsoft Office 2010...
  Microsoft driver (keyboard) 21/04/2009
  Microsoft driver (mouse) 21/04/2009
  Driver Microsoft (System) of 21/06/2009...
  Microsoft driver (System) 21/06/2006
  Driver Microsoft (System) of 21/06/2006...
  RALink Technology, Corp. (Net) 02/04/2013 pilot
  Update for Microsoft Windows
  Update for
  Update for
  Well when the restore point was present he says that these things will be deleted that's where I got the list, but as I said the restoration failed and disappeared.
  I have reset my router but my laptop doesn't detect a network and there are usually 10 in the region and it shows nothing. My router is fine, as I use it now with my playstation.
  Please I really need help, how do I get my laptop to detect the wireless network. If someone could give me a few steps to do, please.

  Most laptops have a switch that turns the wifi radio on or off.  Often, it is a combination of the Fn key and one of the F keys.  It may be a physical switch somewhere on the laptop.  See your manual for details.

  If this isn't the problem...

  What is the brand and model of your router?  Almost all wifi routers also have at least one Ethernet port, you can connect your computer to the router with an Ethernet cable and download the right driver for your http://www.asus.com/support wireless card
  Have you tried to "Roll back driver" in the "Driver" tab of your adapter wifi 'properties' in Device Manager?  At the very least, determine which version of the driver is installed, and compare that to the current version on the asus support site.

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Microsoft Mouse and keyboard Center recognizes not Microsoft Wireless Notebook Optical Mouse 3000 says no device detected

  Original title: Microsoft Mouse and keyboard Center does not recognize my Microsoft Wireless Notebook Optical Mouse 3000'

  My Microsoft Wireless Notebook Optical Mouse 3000 works fine but when I click on it in the devices section and printers on Panel, Microsoft Mouse and keyboard Center does not recognize. It displays the text "No Device detected". Here is a screenshot of what I see:

  

  Hi faignard,

  Thanks for the reply. It is regrettable that uninstall the existing mouse device manager drivers did not help to solve the problem.

  I suggest that you go to the program and features under programs installed and check if there are any associated with IntelliPoint software or any software application related to the mouse installed. In the affirmative, please go ahead and uninstall them and then try to install the driver software IntelliPoint 8.2 in compatibility mode as stated in my previous post dated 22 December 2014. See the following link on how to uninstall program:

  http://Windows.Microsoft.com/en-us/Windows-8/uninstall-change-program

  Please answer us on the State of the question to help you further.

• DETECT HDCP content encrypted or non - HDCP supporting devices

  I want to detect non HDCP support devices and warn users that it is not supported and move to a lower quality stream (non-HDCP).

  Is there a way of in OSMF to detect if the content was encrypted with output Protection, and can you detect what level of protection has been added (NO_PROTECTION, NO_PLAYBACK, etc.)?

  Found the answer to this question:

  To load the metadata and listening to DRM errors via the drmManager, you can detect what types of content HDCP can be played correctly on the device of users.

• No supported device has been detected

  I have the first elements 14 running on Windows 10 PC.  I have a Canon Vixia HV30 connected via Firewire, which recognizes the operating system.   I had problems to download videos of this unit with 11 elements not, but I do not get one "no supported device found" when you use the video importer now that I updated to 14 items.

  FireWire support has been removed in version 13 and on.

  You can read more details and one had alternative suggested here:

  https://helpx.Adobe.com/premiere-elements/KB/removed-features-formats-elements.html

• Satellite C660D-10W - 02 wireless broadband does not connect

  Hello.

  I bought a new computer toshiba laptop, its called a Satellite C660D series Satellite C660D - 10W.
  Then I installed the modem 02 top wireless broadband.
  He showed a shortcut for 02broadband on the left side of the desktop.
  So far everything was going perfectly.

  But... then when I double click on the shortcut of 02broadband, 02broadband logo comes as usual, he shows his support for about 30 seconds, but then it says that it cannot detect or unable to connect! I disconnected and then reconnected to broad band several times, but it just keeps saying the same thing.
  There are 3 other laptops in the House and the 02 broadband installed and immediately connected on each of them.

  One of the laptops was just bought 2 hours ago and it installed and connected to broadband right now.
  This laptop from toshibsa is the only one the 02broadband connects not with, but it installs perfectly down to it.
  Its very weird and makes me absolutely nuts.

  Is there anyone else that happened and could it please help?

  Thank you
  brand

  Hello

  There is no module 3G inside the Satellite C660D-10W.
  Did you find the 3G module in Device Manager?
  I guess that you will not find everything and that's why you cannot use the software installed

  This is the reason why it does not work

• 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Trying to help a friend with their laptop!  It's a Lenovo R61i laptop model A 8932, 54, around the age of 16 months.  WIN/XP SP3 is the only OS.  He was working on this wireless network until they are gone on vacation and tried to connect to public wireless networks! Their daughter portable computer continues to operate properly with this wireless network, and it also shows the neighborhood wireless networks as well.  The R61i has a built-in 'Pro\wireless Intel 3945ABG Network ' wireless wireless adapter.

  Connectivity and internet access works very well through the ethernet port.

  Here's what I've done so far:

  He has Norton AV.  I made sure that it was up to date and then ran a full system scan.  It was clean.

  Any help will be appreciated, and I WILL ANSWER about the results!

  Windows Update ran (after I got it work - see below) for all critical updates.

  Fact a "repair" on the wireless connection with these results:

  • Wireless networks detected
  • No wireless networks were found in range
  • Windows could not finish repairing the problem because it is impossible to perform the following action: connect to the wireless network

  That when the laptop is 5 feet of the wireless router.  It is a Dlink
  Updated the driver from Lenovo web site by the support of the Intel boards:

  • former pilot was 11.1.1.11
  • new driver is 12.4.0.21 with a date of 04/03/2009

  Went into the BIOS and reset the BIOS to its original, saved and reloaded settings.

  Checked the Device Manager.  Everything looks OK, no yellow or red devices

  Remove the network card and let Windows re - create.

  Disabled and enabled the network card

  Check the event logs.  The only entrance is on the system log.  I don't know if this event log entry is significant or not, but it's here:

  Source: NETw5x32, zero category, event 7036.
  The service entered the \DEVICE\{78E5EBB6-A194-4E9F-A840-E05CC39A5823} State.

  0000: 00 00 08 00 02 00 62 00
  0008: 00 00 00 00 7 c 00 40 1 b
  0010: 00 00 00 00 00 00 00 00
  0018: 00 00 00 00 00 00 00 00
  0020: 00 00 00 00 00 00 00 00
  0028: 57 44 52 56 00 00 00 e7

  I have not yet tried it raise in "Safe Mode with networking".

  I would add that "Windows Update" was also not working. Graduation: A few updates have not been installed.  Error code 0 x 41. I had going in downloading and installing the latest version of Windows Installer 3.1, version 3.1.4001.5512

  Do not think that there is a relationship between these two issues, but stranger things have happened.

  The laptop has a 3-year extended warranty and I'm about to throw it in the face of Lenovo as a hardware error.  The thing that blows my mind is 'Detected wireless networks' followed by 'no wireless networks were found in range ".

  Hi Shawn

  Thank you for your help.  Here is the final solution to this problem.

  The "clean boot" you suggested worked as described, but it had no effect of awareness of wireless networks.  Ditto to start in "Safe Mode with network.  We took the laptop to Office Depot; They basically ran the same tests that I did, with the same results.  Their technology has managed to get it to connect to Wireless store by manually setting, but it would not show under 'view available networks '.  He suggested that we call their 800 support number.  The only novelty with that phone support guy came was to "Ping 127.0.0.1" which I don't think inherent in the wireless somehow.  He wanted me to call Comcast to check the internet connection.  Under the principle of "do not create a new problem while you're working on a problem", I resisted to go here as two other computers work fine on this connection from Comcast.

  We finally opted for a full charge of Windows.  This included a blue key on the laptop at boot to bring up "Rescue and recovery", then by specifying 'Restore my hard drive to the original factory condition' and "don't save all files" - we have previously saved the contents of "My Documents" on a USB key.  This charge really don't take as much time as I thought he might; only about an hour.  Most importantly - WIRELESS NETWORKS APPEAR NOW; and connect as it should!  We had to apply SP3 as reloading he brought back to SP2 status.

  I guess the lesson here is that sometimes he just reload Windows is the shortest possible solution to some of these mysterious problems.

  I had a hard time to convince me it was a hardware problem, when the system detects wireless networks but are simply not them!

  Thanks again for your help.

  Bruce Butler (np560)

• Windows Vista does not work with modem wireless broadband

  I saw no answer to this problem.  Can anyone help?

  Windows Vista on my DELL laptop at home does not work with my new NETGEAR modem wireless broadband 3 G.  The modem appears in the list of networks, I just errors like: unable to connect, cannot diagnose,... Both devices work perfectly well together when connected by cable but not wireless.  Interestingly, my laptop work, also a DELL but runing Windows XP, works very well with the NETGEAR modem.

  Summary:
  Vista / Netgear wired - work
  Vista / Netgear wireless - does not work
  XP / Netgear wireless - work

  I went through the NETGEAR troubleshooting guide, doing everything from changing the types of security to manually enter the MAC address of the laptop.  I ran to the ground with the NETGEAR support engineers, and they said check with Microsoft.  I am convinced that it has something to do with Vista.  Any ideas?

  Hi jhandcc,

  Please provide the complete error message you receive.

  Step 1: You can follow the steps described in the article below

  Error message when you try to automatically connect to a wireless access point that uses authentication of network shared in Windows Vista: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/948180

   

  If the problem persists,

  Step 2: Download and install the latest service pack for windows vista on the computer

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791/

   

  Reference:

  You cannot connect to a wireless network on a Windows Vista-based computer

  http://support.Microsoft.com/kb/935222

   

  For more information, see the link below

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My office wireless icon is x'd - cannot detect wireless networks.

  My computer screen suddenly went black this evening - the monitor was still, the fans were still humming, but it was totally insensitive.

  I forced a stop, and when I rebooted the computer, my wireless icon has been x'd out. My computer cannot detect wireless networks (there are a half-dozen or more in my building). I tried a good stop and restart, but the problem was still there.

  The Network Diagnostics tool told me to check the router, so I did--but all other devices in the House are connected very well. I thought it would be a malware, so I ran a MalwareBytes scan, which turned up nothing. Then I reinstalled the drivers from the card WLAN - no luck there.

  System Restore has not solved the problem. ipconfig says "media state: disconnected ' for my WIFI adapter, but I don't know how to fix this. In the devices, the Broadcom WLAN card Manager, he says "this device is functioning correctly.

  I work from home, so it is important that I can access my wireless. Help, please!

  Hello

  I imagine the inconvenience that you are experiencing.

  1. What is the brand and model of the computer network adapter?

  2. This error message with him modeling icon?

  3. do you have a code error message when you try to connect to the internet?

  Here are some steps you can follow to resolve the problem:

  Step 1:

  Check if the network adapter is enabled, if not, please go ahead and enable the network adapter. Please follow the steps:

  a. open network connections by clicking the Start button, then Control Panel. In the search box, type adapterand then, under center network and sharing, click view network connections.

  b. right click on the network card and do one of the following:

  -To disable the network adapter, click disable. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  -To enable the network adapter, click Activate. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, please see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/enable-or-disable-a-network-adapter

  Step 2:

  Try to reset the TCP/IP settings:

  Reference:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357/en-us

  Step 3:

  Flush the DNS and request a new IP address of your ISP server by following these steps.a. Click Start
  b. click on run
  (c) in the Run dialog box type cmd.exe and click OK
  d. in the command prompt, type the following.e. ENTER after each new line.
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew
  output

  See also:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Cannot detect wireless around my laptop

  My windows 7 cannot detect wireless connection, not to mention I had turn it on wireless. And when I want to use the AD HOC as the host network to connect another pc to share files, it didn't work. Windows could not set up the Ad Hoc. What should I do to fix this?

  Thank you
  Leila pamungkas

  Hi Leila,

  What is the brand and model of the computer?

  This problem occurs because the Windows operating system does not automatically recover when a WPA2 ad hoc network connection times out. A time-out may occur if one of the following conditions is true:

  • Windows Vista or Windows 7 detects no activity.
  • There is a charge of busy network traffic.
  • Network device drivers are outdated.

  Method 1:

  Run the network troubleshooter, and update the driver wireless on the manufacturer's Web site.

  Reference:

  Wireless and wired network problems

  Method 2: You can perform the steps described in the article and check out them.

  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to" " "»

  http://support.Microsoft.com/kb/946481/en-us

  See also:

  Set up a computer-to-computer (ad hoc) network

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Hope this information helps. Response with status so that we can help you.

• Up.exe, KERNELBASE.dll APPCRASH Set, installing wireless broadband

  Problem event name: APPCRASH

  Application name: Set up.exe_unknown
  Application version: 0.0.0.0
  Application timestamp: 4b1ae3c6
  Fault module name: KERNELBASE.dll
  Fault module version: 6.1.7600.16385
  Fault module timestamp: 4a5bdaae
  Exception code: e06d7363
  Exception offset: 00009617
  OS version: 6.1.7600.2.0.0.768.2
  Locale ID: 1033
  Additional information 1 = 0a9e
  additional information 2 = 0a9e372d3b4ad19135b953a78882e789
  I tried to connect my wireless broadband to the other computer.
  and it is not working properly.
  and when I connect it again to my office, blue screen goes out
  then stop.
  a few tips or advise pls... tnx!

  Hi Mike mabana,.

  Welcome to the community Microsoft and thanks for posting the question.

  According to the description provided, looks that you can not install wide wireless on your desktop.

  He would be grateful if you can answer this question in order to help you further.

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

   

  Method 1:

  I suggest that disconnect you all external devices except the mouse and keyboard and then perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

   

   

  Method 2:

  
  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Wireless broadband gateway WBG-1200 Toshiba has

  Hello

  I have this router, but could not find updates the firmware for it on the Web from Toshiba site? Is there anything (I think it's a discontinued product)?

  The reason I ask is because the device has stopped working since my ISP changed my ADSL connection to the ADSL service BT instead of the normal ADSL Max.
  This device should work with ADSL Max? Do I need to change the settings to make it work?

  Thank you.

  Hi gloomdog,

  Looking at the [get | http://uk.computers.toshiba-europe.com/Contents/Toshiba_teg/EU/Others/Generic/TEG_Gateway_1200_Specs.pdf |] WBG-1200 has Wireless Broadband Gateway
  ] to this router, it seems it should be compatible with ADSL max. I couldn't find any firmware updates online, but would suggest you reset the router and let automatically pick the BT wholesale's ISP configuration. If this does not work, I would try to access the router configuration page and check the connection with your ISP settings.

  Good luck

  Paul2008.