1050 all-in-One printer - J410: unused ink for awhile
Hello everyone,
I use 22xl ink cartridges.
I have not used it for a few months.
Now, it does not print at all, although both cartridges indicate almost full (it looks like the dried ink or almost).
I get no error when printing.
So is it possible that I can restore State cartridge?
Thank you
Salah
Hi salah.
Do not use the cartridges several months likely to cause print quality problems and think about cloggs due the ink dries.
You can try to perform a cleaning Cycle and check if this may help:
- Open the software HP Deskjet 1050 from your PC.
- Click the estimated ink levels.
- Open the Services tab.
- Click clean print head and follow the instructions on the screen, do not forget to complete the level 2 as well and see if that can help you.
Note: If there is no partial improvement after a cycle it worth the extra cycle and check if that can help you.
HP 22XL mentiioning, is the number of correct cartridge that you reference? the Deskjet 1050 printer uses the HP 122 / 122XL cartridges, not 22 like you mentioned.
If you have the correct cartridges and you see no improvement, try to replace with new ink cartridges we as no use for such a long period can get dried ink.
Kind regards
Shlomi
Tags: HP Printers
Similar Questions
-
How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?
Hello JoshSimon ,
Welcome to the HP Forums.
I see that you have a problem with the printer printing before you print a test page.
If you turn off the printer at the end of the day, please do not. Turn the printer on/off will result in printing a test page. If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.
Once a print job is sent to the printer it then wake up and do the task at hand.
In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.
See you soon,.
-
Photosmart C7280 All in One Printer, Error Message - ink system failure
Hi, I have above named printer with an ink system 0xc18a0406 failure Error Message.
The Printerhead cannot be taken out for cleaning, because there is no leverage. Please can you help me?
Thank you, Cynthia
This might help you:
-
At first, it was just a problem with do not print from the computer. Error messages had to do with the failure of the print head or do not find print head, etc.. After going through several different controls online, download the scans, etc., it does not at all, print showing an error message "ink system failure". I tried to remove and reinsert the 4 printheads (black 932, 933 colors) and turning market and check the caps and unplug the power. Since this is a wireless network, I can't unplug the USB. It was the OK signal. Now, with this error message, I don't see the home screen printer controls. It just says: put it on and then contact HP. Help, please. Very frustrated (it didn't happen all at once - a first he wouldn't print from the computer sometimes, other times.)
Wildrat58,
If you get ink system failure and you've been through the steps that are listed in the article above the printer may require troubleshooting. You can reach support - 800-474-6836. If you do not live in the United States / Canada region please click the link below to get help from your region number. http://www.hp.com/cgi-bin/hpsupport/index.pl - for the maintenance options.
Good luck!
-
DeskJet 1050 All in one J410: how to get the manual for Deskjet 1050 All in one series J410
How can I get the manual? Thanks for your help!
You got it out of the memory of your computer (C), but try to get out of the internet! In any case, thanks for your help.
-
I tried to scan and I am not able to. Screen says refer to device documentation to troubleshoot. I pulled out my software CD to install since I recently moved computers and CD is not usable for this version of windows.
How do I download so I can scan? Printing is fine...
Hello
Thank you for using the HP forum.
You can try painting WIA scanning:
Thank you.
-
After the upgrade of Windows 10, I need to set up my HP printer so work functions. I've looked everywhere but can't find my CD for my Deskjet 1050 all-in-One J410 series printer. I have everything, including my FedEx slip sent to me with my current address. I have the serial and FPU n # also and will give this info if necessary. I just want my printer works properly. Is there anyway that I can do it without my CD? To use an old term of chess, I'm just a 'wood' push, but you people are masters and experts, so can someone there help me, please?
Hello
Kindly click on the following link to install the driver.
I work for HP.
Say 'Thank you' by clicking on the star of congratulations in the post helped you.
Please indicate the position that solved your problem as "acceptable Solution".
-
Windows xp is compatible with hp deskjet1050 all-in-one printer?
Windows xp is compatible with hp deskjet 1050 all-in-one printer?
Must be compatible, you can consult the HP web site to be certain that you have the most recent driver for your version of Windows.,.
-
HP Deskjet 1050 all-in-one: cannot parse with the new 1050
I've been scanning with Adobe Acrobat 8 Professional and a Lexmark printer all-in-one.
Printhead from the printer become blocked, and fixing was too expensive, so I bought this HP printer. Installed and it is lacking. It prints and copies fine.
When I tried to scan, Acrobat knew HP was there and he tried the Lexmark. When I plugged on the Lexmark, he systematically planted everything I tried.
The only change is the new printer. Somehow its installation has made it impossible for me to analyze each device.
I'm at my wit's end. Help, please.
Thank you
Bob
Hi Bob,
Acrobat Professional 8 are supported Twain compatible devices, while the HP printer do not support Apple ICA applications.
As a reference, you can find the following Adobe article:
Acrobat has ICA support on MAC 10.7 for now with Acrobat XI only
https://helpx.Adobe.com/Acrobat/KB/Troubleshoot-scanning-problems-Acrobat-8.html
You can scan using Capture of Image or the HP scanning application, then open / import the digitized in Adobe.
You can find specifications listed below, sweeping an available Twain compatible software interface only for Windows:
You can find measures to scan with your printer in the following link:
Kind regards
Shlomi
-
HP Officejet 6500 all-in-One Printer does not send scan and HP print and Scan doctor without help
HP Officejet 6500 all-in - One Printer does not scan for Windows 7 and HP Print and Scan doctor says 'not imaging' & send error message 8, [1.0,-2147221498)] - I reconnected my officejet drivers reinstalled, etc & nothing works. I looked for help & tried repeatedly, & am willing to renounce HP.
Hello
Thank you for using the HP Forums.
You can try this alternative solution to Scan:
HP extended Scan
FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi
Once it has downloaded and installed, go to start > all programs > HP > HP Scan extended > Run "HP Scan extended.
Let us know if it works.
-
All-in-one printer, Canon Fax L120
Just upgraded to Windows 7, which MUST be compatible with this printer. However the devices and printers, calls it "not specified" IE does not recognize it as a printer. Tried to update downloan Canon drivers but no joy. Any suggestions?
Just upgraded to Windows 7, which MUST be compatible with this printer.
Of course, Canon Fax L120 all-in-One Printer is compatible with Windows 7.
Windows 7 Compatibility Center: Canon Fax L120 all-in - One Printer
The drivers for your downloadable product here.
Try to uninstall the printer from printers and devices and then plug in your printer. Now as soon as you connect your printer try to install the drivers.
-
DeskJet 1050 - J410h: Installation 1050 A All in One Printer (J410h)
Recently, I upgraded my laptop Windows 7 630 to 10 Windows, but when I want to reinstall my printer 1050, show that my laptop is not already compatible on my printer. Kindly advice me on how I can re - install my printer again. Thanks and hoping for your immediate answer.
Marlon
Hello
Thank you for using the forum.
Please download and install the FULL features software to win 10 from this link:
Hope that helps!
-
Photosmart C7280 all in one printer keeps giving me expired ink cartridge warning
My Photosmart C7280 all in one printer Guard giving me expired ink cartridge warning. The cartridge has expired, but I want to continue to use it as it still has ink. Is it possible to turn off these warnings to be boring? I can't print until I have to recognize them!
@ CoolBreeze202 - I'm sorry that you are having this problem with the ink cartridges and the ink expiration error message. You can try to clean the contacts on the cartridge and the contacts inside the machine to ensure that built up on the parts are not the source of the error message. Pages 163 and 164 of the user manual will show a manual cleanup process.
I would also do a hard reset to the printer to try to clear the error message and return the printer to a known working state. No user settings are lost with a hard reset. Here is a link that will show you how to do a hard reset on this machine.
-
7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs
Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?
Hi @ohchango,
Welcome to the Forums of HP Support!
I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.
NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.
In order to help you, I'll need more information.
What operating system do you use?
Mac OS X: How to find which Mac OS X Version is on my computer?
Windows: How to find the Windows Edition and the Version on your computer.If you need assistance, please let me know the instructions above. I look forward to hear from you.
-
DeskJet 1050 all-in-one j410 for windows8 series driver
DeskJet 1050 all-in-one j410 for windows8 series driver
Hello
Please Download Full Feature software and drivers from following link:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4027465
Kind regards.
Maybe you are looking for
-
L450 RunDLL - error CustomEventMonitor.dll
I've done a few Lenovo updates through the center of solutions Lenovo abd now I get a DLL error at first run upwards. He says the following: There was a problem starting C:\ProgramData\Lenovo\iMController\Plugins\LenovoAudioPlugin\x86\CustomEventMoni
-
I have a C4780 into one connected wireless via airport to a Macbook. Lately I have partial impression of delays in printing, and paused in printing. I called HP and did all the things, the tech told me to do and it improved for a day. I tried onlin
-
Can I put a reminder on a line on a canvas print?
Can I put a reminder on a line on a canvas print? How can I do? A few examples? I want to click on the line and a sign to appear, but I don't know how this thing of a reminder for the line of code. My canvas: Test_2 = NewCtrl (panelHandle, CTRL_CANVA
-
Returns the selected table column header
I don't know there is probably a way to do this. But I have not yet found. I am building an application that will act as a sort of "universal" reports generator for a MySQL database tables. At startup, a drop-down list box is filled with the names o
-
I have Windows Vista on my computer and now I can't seem to find the toolbar
Windows Vista