1050 Deckjet

Similar Questions

• 12.5.1.21 iTunes has stopped working. APPCRASH on Windows 7. WebKit.dll 7602.1050.4.5 error

  iTunes64Setup - 12.4.3.1 worked very well and no problems on Windows 7.

  After the update iTunes6464Setup - 12.5.1.21 or iTunes64Setup - 12.5.1.21, APPCRASH arrived.

  Get 2 x "iTunes has stopped working" and the messages to "Close the program" when you try to view the store / App Store or view account.

  Possible only "close program"...

  Tried to uninstall ALL Apple software (with deletion of all files) and reinstall again but still the same error!

  All software average iTunes to Apple, Apple Software Update, Apple Mobile Device Support, iCloud, Hello, Apple Application Support (32-bit and 64-bit).

  Checked the event viewer:

  1. error message:

  Name of the failing application: iTunes.exe, version: 12.5.1.21, time stamp: 0x57cfb09f

  Name of the failed module: WebKit.dll, version: 7602.1050.4.5, time stamp: 0x57c11f7f

  Exception code: 0xc0000005

  Offset: 0x004f0e09

  ID of the process failing: 0xcc4

  Start time of application vulnerabilities: 0x01d218b3194e2f01

  The failing application path: C:\Program Files\iTunes\iTunes.exe

  Path of the failing module: C:\Program Files (x 86) \Common Files\Apple\Apple Application Support\WebKit.dll

  Report ID: 68f80588-84a6-11e6-8df8-4851b741621f

  2. Windows Error Reporting

  Fault of type 1024926102, bucket 25

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: iTunes.exe

  P2: 12.5.1.21

  P3: 57cfb09f

  P4: WebKit.dll

  P5: 7602.1050.4.5

  P6: 57c11f7f

  P7: c0000005

  P8: 004f0e09

  P9:

  P10:

  Hello, follow the instructions If you see 7 error (error Windows 193) when you try to install iTunes for Windows - Apple Support

• hp deskjet 1050 printer, no paper feeding. not find a jam

  I have a HP 1050 printer/scanner/copier.

  I have not made any changes to it and do not see an error message, but when I try to print, it seems that the book seeks to pass through and it will remain partially but then stops.  Watched is stuck, I don't see anything. The scanner works fine so I know that the connection is ok.

  Any ideas would be greatly appreciated!

  Thank you

  New pb1031 Hi

  Thanks for the reply back with the operating system.

  This article will get you detail the steps on how to approach the troubleshooting of this problem;

  http://support.HP.com/us-en/document/c02061020

  Also after the steps in the article, let's run this utility HP print and scan the doctor, download and run this tool of diagnoses and solves many printing, scanning and connectivity issues.

  Updated with all the mistakes that the tool can be found or if you still need help so that I will try my best to help you.

  I hope this helps!

  RobertoR

  ▼

• Satellite Pro P100 - display 1440 x 900 upgraded to 1680 x 1050

  Hello

  I have a defective Panel in my Satellite Pro P100. Model No.: PSPAHE - 001001GR.
  Currently, it is a sign of Lp171wx2 with a resolution of 1440 x 900.

  I can change it for this Panel: LP171W02 with a resolution of 1680 x 1050?
  Will it recognize kind of Plug-and-Play? Better resolution and running as before. Or does not recommend or not even possible?

  Thank you very much in advance,
  Schwieger

  Hello

  I think he can.
  I know that the different models of Satellite P100 were equipped with two type of poster:
  17.1 inch, WXGA + (1, 440 x 900), color TFT display high brightness of amorphous silicon.
  17.1 inch WSXGA + (1 680 x 1 050), color TFT display high brightness of amorphous silicon.

  I m not very good if you could use the LP171W02, but the laptop would certainly deal a 17.1 inches, TFT WSXGA + (1, 680 x 1 050).
  You can also order a compatible part of a Toshiba ASP in your country.

• Tecra S3: Driver needed to activate the resolution to 1680 x 1050 on external monitor

  I am looking for a driver for Windows XP that supports an external monitor to 1680 x 1050 on a Tecra S3.
  So far with the Toshiba drivers I can only use 1440 x 900.
  The monitor can be detected through its resolution.

  Is it possible to use two different external monitors?

  Thanks in advance!

  Hello

  1. There is no official driver of Toshiba or Nvidia with this resolution.
  I tested the driver 165.01 http://www.laptopvideo2go.com/drivers with the external resolution 1680 x 1050 and it works very well.
  Download the driver and updated the inf file.

  2. even if you are using the docker, there is no way to use two external monitors connected VGA and DVI simultaneously. This is not supported.
  Only of external solutions with a separate adapter grafics provide (for example Toshiba Dynadock, a usb solution). But from my point of view, all are not very satisfactory.

• 600-1050 HP Touchsmart All in: upgrading ram touchsmart 600

  I bought a

  Memory RAM-DDR3-1333 8 GB [2x4gb] Upgrade Kit for

  to upgrade my HP Touchsmart 600-1050 all-in-one.

  However, he had not worked and shows only a black screen after the installation.

  The discription is

  Memory 4GB DDR3 - 1333 PC3 - 10600 Non - ECC Unbuffered 204 pin 1.5V = 9 CL

  Then after, I bought another

  8GB (4GBx2) DDR3 1600 MT/s Kit (PC3 - 12800) CL11 SODIMM Notebook Memory Modules CT2KIT51264BF160B / CT2CP51264BF160B to amaozn.com

  It has the same problem.

  Those who are not compitable with my computer?

  If so, let me know a compitable memory set for upgrade.

  Yes, that would be true, but that model is an all-in-one computer, it is not flexible for the replacement of the Board of Directors, as a regular desktop would be. You probably only have the option of a Board.

• 600-1050 replacement hard drive

  I have a 600-1050 Touchsmart and replace the hard drive with a larger capacity.

  I saw messages for other models imply that the max that they support 1 TB, but found no specific to the Touchsmart 600-1050 post

  What is the largest hard drive controller drive support?

  Can't find any update of the BIOS on the support site.

  (planning on installing fresh Windows 8.1)

  Thank you

  You should have no problem with hard drives up to 2 TB... Readers from over 2.2 to be unusable by your computer.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Satellite Pro A120: How to set a resolution of 1440 x 900 or 1680 x 1050 on external monitor

  Hello

  I'm considering buying an external to use with my Satellite Pro A120 monitor. The laptop has a Mobile Intel 945GM chipset and it doesn't seem as if I can choose the resolution that I would need a widescreen (1440 x 900 or 1680 x 1050), with its menu of graphic properties.

  Is it possible to put one of these resolutions so that I could use an external display, or is simply not an option?

  The drivers supplied with the monitor would be likely to help him?

  Hello Thom

  Unfortunately when you have factory settings you probably won't be able to use these resolutions. I put t know if it's because of preinstalled driver or limitation technique graphics card.

  You can try to install the driver from the manufacturer of the graphics card and see if it will work (Intel or ATI). Just testing everything.

  If you have the time to read this interesting topic http://www.laptopvideo2go.com/forum/index.php?showtopic=9243

• cartridge HP 61 (recharging)? Deskjet 1050 /HP, series J410, discharge printer/scanner

  I bought a hp deskjet 1050 (J410 series) printer/scanner, about 3-4 weeks ago, at Future Shop for $29.99. I used all of the ink in the black cartridge 61 hp, called a local outlet for a large company to fill cartridge and I was told that they could fill up again. They did it.
  
  Now the printer/scanner is displaying the attached message and refuses to print.

  

  What is the opposite of "green"? HP did not hear the words "reduce, reuse and recycle '?
  
  HP is really so short-sighted that they hired printers and cartridges design engineers so that the printer does not work after using the ink in the cartridge?
  
  A new hp deskjet 1050 printer/scanner costs $29.99 at Future Shop. A black hp 61 cartridge costs $19.99. They really matter to the printer go in a landfill after using ink? I used to think product hp product - quality since I bought my first calculator hp 21 more than 35 years ago.
  
  I tried to get rid of the warning (with the 'Close' button disabled) by starting the Task Manager and end the task. but the printer still does not print. Do you know another solution to workaround?

  At this point, I think again the printer & shopping for a better alternative.

  Thank you.

  I would say that if the message comes up again just to say 'no '.   While HP does not fill, they try to crack down on counterfeiting, which sells reloaded cartridges / reman as genuine HP.

  BTW, instead of charging probably taken your cartridge used once and you gave another replacement.  If you had gotten back your printer cartridge would have recognized and do not show this message.  I suggest that contact you the restring a replacement if cleaning the contacts of the cartridge as shown below (for a different series, but the same principle) does not solve the problem.

  On a related note, I gave once a printer at the local high school.  Some time later I received a call from the teacher that he was not working properly.  They had replaced the #57 with a charged cartridge that had the wrong color in yellow (green now).  We got a replacement and had one of the missing colors.  Finally, the third replacement worked.  I asked why they bought refills and the teacher said they were less expensive.  I asked if they have 1/3 of the price...  You get what you pay for.

  BTW, I do not work for HP or represent them, I'm just a volunteer on this forum.

• Cannot set external LCD 1080 x 1050 resolution - Satellite Pro M40

  Hello

  I just bought a Samsung LCD 226BW screen and my Satellite Pro M40 (PSM46E) makes me crazy. First of all, I could put the display driver in 1080 x 1050, but suddenly dissappeared option. I reinstalled the display driver, but no luck. He even got to the point of despair that I reinstalled the computer laptop everything, but it still does not work.

  I tried to download the display driver for the ATI Radeon XPress 200 M series the Web of ATI site, but it did not support my graphics card.

  Does anyone have a suggestion for what do I do? Thanks in advance!

  Best regards
  André

  Hello

  Did you receive a CD driver or software with your external monitor?
  I read in this forum that a lot of users received this CD and was able to activate this resolution of the screen.

  I think that the monitor manufacturers provide some .ini files which contain the information on the external resolution. This file must be replaced!

  But have you tested the graphics driver on the www.omegadrivers.net site?
  Check if these pilots will help you activate this screen resolution!

  Good luck

• Portege M400: Is it possible to use the resolution 1400 x 1050 on external monitor?

  The Portege M400 SXVGA (i.e. 1400 x 1050) can support 1400 x 1050 via analog / external monitor? I ask this question because I can't do! Most importantly, he is happy to provide, even if the monitor is a TFT 1400 x 1050 screen is 1280 x 1024.

  I downloaded the latest Intel drivers and screen drivers, and although the o/s reports screen as being happy to show 1400 x 1024, it is not an option when selecting the resolutions.

  Is this a known issue?
  It is corrected using digital?
  Am I stupid?

  Hello

  I'm not 100% sure but I think that that it will not support a higher resolution. In my opinion, it is according to the performance of the graphics card and the resolutions supported and not according to the used port.

• Portege M400: Resolution 1680 x 1050 on external screen is not available?

  Hi people,

  I just installed a Portege M400 with an external monitor from other manufacturers. This optimal resolution of the monitor is 1680 x 1050. I installed the latest Intel drivers available on the web site of toshiba with manufacturing monitor drivers. I can't get this combination in its optimal resolution. Can anyone of you help me with this problem please?

  One thing you need to know: the monitor works perfectly on another laptop... so it has nothing to do with the monitor itself...

  Thanks in advance...

  Hi Steve

  I think that you are not able to use this resolution because it s is not available in the properties of the graphics card.
  To my knowledge, doesn t graphics card driver supports different resolutions. Some of the resolutions are disabled or are not in the graphics card driver.

  Some users have solved this problem by using a different graphics driver, but this is only possible on models with the nVidia or ATI graphics cards.
  Unfortunately, I think that there is nothing to do.

• Tecra A10 - 14Q - no external screen 1680 x 1050 resolution

  Hello

  I want to use the native resolution of 1680 x 1050 on my Tecra A10 (analog) external port. I can't get this to work - the display shows "out of range" (?) - very strange.
  The best resolution that works is 1400 x 1050. When we look at the possible resolution of construction in the Intel G45 Chipset graphics, it goes up to 1920 x 1200 and more. So it must be possible...

  You use the most recent driver, tested on 3 screens (Samsung, Benq, HP). I think out of reach of the means that there is a signal from the port, but not at the right frequency. Specifications of the pilot at this resolution say 60 Hz, which is the norm.

  Can anyone help? Is there a tool to tweak the display settings for the graphical interface Chipset Intel G45 (like ATI)?

  Your B.

  > The best resolution that works is 1400 x 1050. When we look at the possible resolution of construction in the Intel G45 Chipset graphics, it goes up to 1920 x 1200 and more. It must be possible

  First of all not all resolutions are available and taken in charge by a graphics chip or a graphics card driver!

  In order to use such a resolution, both parties (the graphics chip and graphics driver) should support, but if one of the parties would not support the resolution of your favorite, then you won't be abele, use it!
  That is a fact.

  I recommend that you check the manual of the user that was preinstalled on your laptop
  You can find the emanations of the resolutions available and supported.

• How to open my HP Touchsmart 320-1050 to check the fan

  My Touchsmart 320-1050 is 18 months old and there is two weeks the fan started to have really strong.  Looks like the engine of a plane is racing upwards for takeoff. How can I open the back to see if the fan is dusty or has to be replaced.  We live in a rural area and dirt with a lot of dust.

  Thank you

  Shirley

  Hi Shirley09,

  Really sorry. You can go there.

  http://support.HP.com/us-en/document/c01657439

  I would like to know how this happens.

  Thank you

• Tecra S5 - no support display 1680 x 1050 under Win XP

  Hello

  I have a Tecra S5 with NVIDIA Quadro NVS 130 M, 512 MB. The driver version is 6.14.11.5692.
  And monitor external en Samsung SyncMaster 2232BW.

  Using Win Vista as an operating system, I can set the resolution to 1680 x 1050 for the external monitor.
  But I pass on Win XP and now I don't have to choose the resolution 1680 x 1050 for the Samsung monitor.

  Can you help me on this?

  Have you installed the latest display for Windows XP driver?
  On the Toshiba website version 6.14.11.5692 for Windows XP is the newest (even in Vista).
  http://EU.computers.Toshiba-Europe.com

  The external monitor is recognized as a Plug & Play monitor?
  You can also test pilots of the manufacturing. There is a driver available for Windows XP.