1053 error Code Print spooler could not start

Similar Questions

• Acrobat downloads and passes by the installation process but the stalls at the end sentence "the print spooler could not start" someone told all solutions?

  Acrobat downloads and seems to go through the installation process but the stalls at the end by saying that "the print spooler could not start".

  All this experience and give me advice?

  Hi johnt46100749,

  Please try the solution mentioned in this KB doc https://helpx.adobe.com/creative-suite/kb/error-1920-service-print-spooler.html .

  Kind regards

  Nicos

• Print spooler does not start error 1053

  I have Windows 7 64 bit and the printer has always worked fine until a week ago.  I now have a pop-up message that says "I need to select a printer.  And if I need to install a printer, click Add printer, or find... ».  I click on the printer to find and it is empty.

  I searched the forum for Microsoft and tried the following solutions:

  -I went to Services, checked to see if the CPP is automatic and works.  This is the case.  Then I checked Spoolvs and it is also automatic but not running.  I click on 'Start', but I get an error message 1053 "service did not demand launch or timely control.

  -Command prompt to check all corrupted files.  The results are all ok.

  -Network > the sharing advanced setting > under home or work > under homegroup connections, I ticked the box "user accounts and passwords.  then restart.  The printer has worked for only 2 tests.

  -Leva 'Windows Update' and nothing is needed.

  -A ran a virus scan and everything is fine.

  -Wanted "Event Viewer" > error > Printing Service, the results only with error 2114 «print spooler could not share Canon ink jet with the name of the shared resource in ink jet Canon...» ».

  Hello

  It is not irreparable, but it takes a bit of knowledge. Try the methods that to
  once. As I said seek help from a family member, a friend or a real computer store.

  If you start up and down if you think you can perform these tasks
  even if you don't understand them.

  Make a Restore Point before you start, you can return to where you were like that
  If necessary. (Although to be honest, a serious mistake made by those who is unlikely even if you)
  make a mistake).

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Print spooler does not start

  I have problems printing due to the fact that the print spooler does not start even after restart pc & try manually in the services, there he gives me error 1053. It is configured to start automatically in the print spooler box, so I don't know.

  Hi Wobblesmf,

  Welcome to Microsoft Community where you can find all the answers related to Windows.

  According to the description, it seems that the print spooler does not start.

  However, we need more information about the issue to help you better.

  Please help me to answer these questions.

  1. what version of Windows are you using?

  2 have had any changes made to the computer before the question?

  Visit the link for the operating system that you use:

  http://Windows.Microsoft.com/en-us/Windows/which-operating-system

  I have this link which should guide you in the right direction.

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Note: The steps mentioned in the link is for Windows 7. You can change the version of the operating system in the same link by clicking on the button beside Windows 7 drop-down and select the one that you use.

  Using the windows-related issues feel free to post on Microsoft Community.

• error code 80080005 'Windows could not search for new updates"

  error code 80080005 'Windows could not search for new updates"

  What operating system?

  http://support.Microsoft.com/kb/910337
  This error message is similar to the error message "error 5: access is denied." To resolve this problem, follow the steps described in the section "error 5: access is denied."

  This error indicates that access for FOREST permissions have been modified. To repair these access permissions, use one of the following methods, depending on the operating system.

  Windows XP

  1. Click Start, click run, type cmd, and then click OK.
  2. Type the following command and press ENTER:
     SC tisb strands D: (A; CCLCSWRPWPDTLOCRRC; SELLERS) (A; CCDCLCSWRPWPDTLOCRSDRCWDWO; (BA) (A; CCLCSWLOCRRC; AU) (A; CCLCSWRPWPDTLOCRRC; CENTRAL UNIT)
  3. Click Start, click run, type services.msc and click OK.
  4. Double-click on Background Intelligent Transfer Service.
  5. On the general tab, click Start.

  TaurArian [MVP] 2005-2010 - Update Services

• Spoolsv.exe - local print spooler does not start

  Dear all

  My local print spooler will not start. After a recent Windows update all my devices when removed, which was a printer. I run the malware and anti spyware software on my PC, remove no matter what malware/spyware, but I can not yet install the printer I have.

  The message I get is "Windows cannot add a printer. The spools of local printer service is not running. Please restart the spooler or restart the machine. I tried to restart the spooler but this does not work, I get an error 1068. I rebooted the machine several times; all to nothing does not. The 'service' shows 2 HTTP and RPC dependencies. My understanding is that the only dependency should be the PRC, but I can't change the file. Short to restore PC to factory settings and start all over again, I'm lost. Is there anything else I can try before taking this reconstruction?

  Your

  Doug

  At a prompt (run as administrator), run the following:

  dependent on the spooler of sc config = RPCSS

  Note the space between = and RPCSS.

  This removes any dependencies on the spooler and restore the default RPCSS dependence.

  One of the problems with viruses and malware is that there is no real way to know what exactly it is they changed on your system, the more benign virus may be easy to remove but never pests morphing and a constant flow of new pests pushed one never knows how a machine is compromised.  After the withdrawal of an infection, you should always ask yourself if you can really trust the machine, if you don't know if the answer is no, the only course of action is to flatten and rebuild the machine.   Disk imaging/cloning utilities are perfect for this, they can help you get your machine running in a minimum of time and upward.

  John

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Error message "a program could not start. Please try again"when I try to send Remote Assistance invitation.

  original title: Remote Assistance does not work

  Win XP PRO SP3

  Question #1:

  When you try to send an invitation to support remote I get an error message "a program could not start. Please try again. »

  This error pops up before even the invitation is created, so the problem is with the creation of the invitation and not with problems of subsequent connection between the computers. The invitation is never created. This happens on several computers I own or maintain.

  The event log records all errors when this happens.

  I searched for hours all over the Internet and a lot of people seem to have this problem. Some it is resolved, for the most part, they needed to start a service, but the cause of their problem is not the same as mine.

  After restarting the computer, sometimes the invitation creation works fine.

  Other DIY suggests when the problem appears it can be corrected by running the command 'sessmgr-service' in a command line window. After executing this line it seems that the problem is resolved.

  What I find disconcerting is that Sessmgr.exe is the service Remote Desktop Help Session Manager that was already running, but for some unknown reason runs this line made work again right. I'll have to experiment more.

  Is it possible to debug and fix this?

  Question #2:

  When I can finally send an invitation it will work on the local network but not on the Internet. I can't connect to the Internet.

  I'm looking at the structure and the content of the invitation to http://msdn.microsoft.com/en-us/library/cc240167(v=prot.10).aspx
  In the example given here, as in the generated invitations in my experiences, the invitation contains only the LAN IP addresses (with port number) but no global address.
  RCTICKET =... 192.168.1.65:3389; Jeff: 3389

  How the computer expert is supposed to understand the global address to which it should connect is a mystery to me.

  How can I get Remote Assistance to work on the Internet?

  Hello

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Windows error recovery. Windows could not start... _

  My Dell laptop I have from 10th July indicates the following:

  Windows error recovery

  Windows could not start.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, chose to start windows normall7

  Start the reboot system (recommended)

  Start Windows normally

  The two options to return to the same screen.

  I tried the menu under the F keys, but all options listed do not seem to do anything.  I talked to Dell who ran a diagnostic test on the portable equipment and everything was ok.  They wanted then £70 the issue above which I am unhappy that have not had the laptop for a year yet!

  I would be very grateful if you could help!

  Thank you

  Mark

  Hello mtb123,

  1. have you tried the steps suggested by Srinivas R in the previous post to make a startup on your computer repair using the Windows installation disc?

  2. you remember what changes you made to the computer before you start this error?

  I suggest that you access the system recovery options using a Windows Vista installation disc and do a startup repair and if this fails, you can do a restore of the system from the Windows recovery environment.

  You can see the previous post of Srinivas R to verify the information on the system restore.

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Error message - "this application could not start because the side-by-side - configuration - is incorrect, when you access programs."

  Hello

  Any help step by step to address this issue would be welcome

  On a Fujitsu laptop running Vista and MS office 2010, when I try to access word, excel, or one of the other programs, I get the following error message - "this application could not start because the configuration - side by side - is incorrect." see the applications for more information event log"

  Thank you in anticipation

  Hi BackrowSteve,

  1. did you of recent changes on the computer?

  Method 1:

  If you are facing the issue only with the Office programs, you can read the following article and check if that helps:

  http://blogs.technet.com/b/AppV/archive/2010/06/10/solution-possible-side-by-side-error-when-sequencing-Office-2010-on-Windows-Vista.aspx

  Method 2:

  If not, then you can uninstall all existing versions of Microsoft Visual C++ Redistributable Package and install the latest version of Microsoft Visual C++ 2010 redistributable and check if it helps.

  Step 1: To uninstall the package:

  a. open programs and features.

  b. in the list, find the Package redistributable Microsoft Visual C++ and click on it.

  c. click on uninstall at the top of the list.

  Step 2: Download and install the latest package depending on the version of Windows Vista, you use and see if it helps.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  Hope this information is useful.

• Windows 7 printer spooler does not start

  just my printer spooler does not start in Windows 7.  I received a message that the spooler wasn't running when I tried to use it today.  I used the printer for a few days. "net start spooler" fails from the administrator command prompt.  I checked that the CPP is running.

  I installed SP 1 yesterday with success, but I went back to the restore point, but still, the spooler does not start.

  The system acts as the spooler is missing.

  How can I solve this problem?

  Thank you

  Jim

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Locate bridge end RPC Mapper in the list. Check that he started and that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Repeat the procedure for DCom server process Launcher.

  It is always sensitive in this situation to achieve a malware check.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/
  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:
  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

  Currently, this is a good combination that seems to detect more malware, but it can miss the malware as all security software can do.

• error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone please tell me how to proceed? __

  error code (-3212) itunes could not connect to the store, make sure your network connection is active and try again. Can someone tell me please how to do this?

  Hi vivasiousv,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  See the links in the Apple Web site and try the steps mentioned below.

  http://discussions.Apple.com/message.jspa?MessageID=6096760

  http://discussions.Apple.com/message.jspa?MessageID=8436848

  For additional support post your query in the Apple discussion.

  http://discussions.Apple.com/category.jspa?categoryID=150

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Out of nowhere I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  I nowhere hand, I get this error message "the application could not start properly (0xc000001g). Click OK ot close the application. "I have uninstalled and reinstalled several times.

  Hi Kingsberry and almathof,

  Please refer to this thread: Re: Premiere Pro 2015 won't open after the recent update

  Thank you

  Regalo

• Printer spooler will not start error 1053

  Hello

  I got a Lexmark X 4550 printer installed on my Windows 7 x 64 inspiron for a few months now. Steeplechase the printer would not print that's never happened before. When I went to devices it says there was a problem with the printer and she needed troubleshooting. The store could not find a solution. I found a few fixes suggested online and you have tried without success. However, I discover that the printer spooler has been arrested. When I tried to restart services it came with an error that says: -.

  Windows cannot start the service on the local computer printer spooler

  Error 1053: The service did not demand launch or timely control.

  I checked that it is configured to run automatically, and when I checked the dependencies that I discovered that the remote procedure call was arrested and the manual value. I have reset automatically and it started successfully. This did not however fix the printer spooler error.

  I uninstalled the lexmark software and tried to delete the printer driver - this has not helped either.

  I also tried the following: -.

  Open a command prompt window

  the control key;
  dependent on the spooler of sc config = RPCSS

  Restart the print spooler

  This did not help also.

  I tried the list in the folder of the coil of compensation, but there's nothing in it.

  I totally ideas, suggestions on how to fix this? I think that Windows had a fix for this problem on XP and Vista, but I can't find one for windows 7. Any help would be greatly appreciated.

  James (and all those who have contributed so far),

  I found this offer on the Microsoft Answers site forum.  It's by a guy named encro.

  Let me know if it works, I don't have access to a printer for the moment.  I'd be more interested in your results, whether it is successful or not.

  The solution: get the spooler to start!

  This seems to be a very common problem on Windows 7, caused by a recent update 'Important' within the late March/early April. I found the fix for this while working on a clients machine and noticed something abnormal in that the print spooler was not actually the print spooler it is why it wouldn't start. Now that our team have set about 20 machines using this process, I'm confident enough, that this is workaround until a future WSUS update corrects this correctly. It's still speculation at this point because log files have not really brought to this day a lot of troubleshooting help this and it can be not linked to a KB from Windows Update.

  I'm still trying to determine the real Windows Update update that caused the problem to inform Microsoft of bug but the problem goes something like this:

  Determine if this is the case on your computer.

  Verify the existence of spoolsv.exe.org and spoolsv.exe in %windir%\system32 (C:\Windows\System32)

  If both exist then it is likely the following problem.

  Compare the spoolsv.exe file size
  
  Sometimes the real spoolsv.exe is called spoolsv.exe.org [545KB] and instead of spoolsv.exe place will actually be a file 41KO posing as the print spooler. I guess the system saved the original spooler at a given time and accidentally replaced it with something else. Spoolsv.exe should be the file 545KO at this point.

  Correction of the problem

  Step 1: Spoolsv.exe and rename it spoolsv.bak

  Step 2: Spoolsv.exe.org and rename spoolsv.exe

  Rename spoolsv.exe.org here is a bit more tricky because it requires to change the property file from TrustedInstaller to the administrator group and giving the full group write permissions for the file. Without doubt, this has security implications, it is recommended to restore the permissions once the file is renamed.

  By changing the property of the file from TrustedInstaller to administrator then activation full of change to the administrator group, you can exchange files by the name change and correct this problem.

  I usually and rename spoolsv.exe spoolsv.bak and then rename spoolsv.exe.org to become the real spoolsv.exe.

  Step 3:

  Start the print spooler via Services (services.msc) or at the command prompt by using net start spooler.

  Moment<3 from="" the="" spooler="" and="" a="" major="" headache="" for="" many="" people="" finally="" fixed="">