1073807346 error occurred at the VISA write to rsspecan_core_write.vi

Possible reasons:

VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

I use a USB port for connection of GPIB to a Rohde Schwarz FSV30 of Windows 7 spectrum Analizer.

My program works 100% in LabView, but the problem comes when I compiled the program into an executable.

I have already installed runtime NI VISA 5.0.1 and it still does not work.

I also installed the drivers of 2.73 OR-488. 2 for the GPIB unit.

Any ideas?

I thought about what it (finally), it works now!

After adding the screws needed for the project you should also go to the executable properties-> Source files and then select all the files to be "Always included" on the right side.

Thanks for you help Jürgen

Tags: NI Software

Similar Questions

  • How can I send a GET command (Group execute Trigger) with the "VISA write VI"?

    I have an old Type of Yokogawa (1981) 2553 (DC voltage current Standard) with a GPIB and an Agilent converter USB to GPIB interface. So I write my orders using the "VISA write VI. According to the manual, I send the GET command after the other commands. How can I do this?  I tried to use the GPIB VI, instead of VISAS, but I always got the error 7: "NOR-488: Interface GPIB not found '...

    You cannot use the low-level GPIB functions because you are an Agilent controller. The low-level functions are only for the OR.

    Visa application, use the trigger to make visa.

  • Error: "an error occurred saving the file because it could not be created" during the recording of digitized file

    Original title: I'm not able to save the scan through my HP Officejet 6210 all-in-one.

    I get this error message: an error occurred saving the file because it could not be created. What should I do? I used to be able to save documents in the form of files .pdf until recently when my computer has been infected by a virus, and someone helped clean up remotely.

    Hi ameerlakhani,
     
    Try to save the scanned in a different file format and check if it helps fix the problem.
    Follow the steps in this article and check if it helps.
     
    If this is not enough, post your request in the support forum HP for assistance.
    Visit the following link to do the same thing:
  • Material up to date Assistant, MTP device an error occurred during the installation of the device

    I have a problem installing the driver for my mp3 player. I get this message after I try and install "" there was a problem installing this device: MTP device, is an error occurred during the installation of the device the specified service does not exist as an installed service. "" Even if I uninstall and re install the driver, I still get the same message. What could be the cause of this error message?

    My operating system is Windows XP home

    Original title: update Hardwre Assistant

    Hi D.L.B1,

    • What is the brand and the model number of the MP3 player?
    • Other USB devices are connected to the computer works well?

    You try to manually add the MP3 player to the computer and check if it can help solve you the problem and if the MP3 player is detected.

    You can access the link below and follow the steps in the article to manually add the material to the computer.  When adding the verification of the material if it appears two devices one by one for device MTP and other USB Mass Storage Device. If it shows both, select the USB mass storage device from the list and try to install it and check if that helps.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/app_start_hardware_wizard.mspx?mfr=true

    If the problem persists and you cannot install the MP3 player, you can contact the manufacturer of MP3 and check if you need to make changes to install it and if they have the latest drivers to install.

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error occurred during the installation of the Unit Trust Mini card reader

    I'm not able to install confidence 0908-2005-4324 - EN - 15298 - Mini Card CR reader - 1350p.

    The error message is: 'cannot install this hardware; There was a problem installing this hardware: Generic USB SD Reader USB Device; An error occurred during the installation of the appliance; One of the filters installed for this device is invalid". Should which driver I?

    I have already made contact with the card reader support team, but they couldn't tell me which driver was necessary.

    Thank you for your help.

    Hello D G C,.

    Thank you for your message.  As seen HERE, no drivers are needed for your device.  Are you able to get use all USB devices on your computer?  We must refine if the problem is with a USB port or the Generic USB driver on your computer or a problem card reader.  Please let us know so that we can help to solve this problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message during the installation of the sound card: an error occurred during the installation of the device__ "e/s operation was abandoned because of a thread exit or an application request." _

    Hello
    I can't update the audio driver on my PC. When you try to install the driver (new sound card), I get the following message is displayed:
    There was a problem installing this hardware:
     
    An error occurred during the installation of the device
    "The IO operation has been abandoned due to a thread exit or an application request."
    The driver worked fine on this computer until a month ago. I think it's more a problem of Windows installation as a driver issue, but I do not know where to go from here. Any suggestions?
    Thank you
    I tried to install the sound card on different PCI expansion slots. I get the same message trying to install a USB sound card. The sound properties in the control panel are classified outside (non-active)

    Hello Smachbub,

    Thank you for your message.  Let's try one or two different things.  Please follow step by step.
    1. we will try to completely remove the previous sound card driver, then reinstall.
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Click on Device Manager.
    Click the (+) sign next to "sound, video and game controllers".
    Below, you should see your audio card, right click and select "Properties".
    Select the 'Drivers' tab and click 'uninstall '.
    After uninstalling the driver, reboot and go to your computer manufacture or website of the manufacturer of the sound card and download/install the latest driver for your device.
    If problems persist, try this same process as a new profile.
    2. to create a new profile:
    Click 'Start' > right click on 'My computer' > select 'manage '.
    Double-click 'Users and groups' > select 'users '.
    In the right pane, right click and select 'add a new user '.
    Fill in the appropriate information, and then select 'create '.
    The new user must be added, right click on the new user and select "Properties".
    Select the tab "member of ' and click on 'Add '.
    Type Administrators and click on "check names".
    Once the name is entered correctly, click 'OK '.
    Log off your computer and connect with the new credentials.  Then try removing and reinstalling the driver.
    Please let us know if it did or did not help to solve your problem.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • Microsoft Fixit error "an error occurred during the download of one or more components and cannot run the Troubleshooter"

    Original title: cannot run FixIt.

    With the help of Vista Home Premium, sp2, 32-bit on Toshiba Satalite A135

    I tried for days to find a solution for the reason why I can't run software 'MR FIXIT' or "MICROSOFT FIXIT" auto diagnostic I downloaded several versions of the software and saved, but when I try to launch it I stopped.  The following message appears: "toubleshooting cannot continue b/c an error has occurred."  An error occurred during the download of one or more components and cannot run the troubleshooter. »
    These versions I've tried lately:
    microsoftfixit. Program.installuninstall.RNP.84258196752136210.7.1.Run
    microsoftfixit. Program.installuninstall.Run
    microsoftfixit. WinSecurity.fisc.8425861308153696.4.1.Run
    microsoftfixit. Wu.FISC.8425861308153696.4.2.run
    852581157233326805.5.1.run
    I don't know if the problem is related, but I was also impossible to install the download: security for microsoft .net 1.1 SP1 framework update... (kb2656353).  I tried to install this download since January of 2012.  The reason why I tried to use the auto diagnostic software should fix my problem of installation of the security update.  I remember somewhere along the way, getting the error message that some files were corrupt.  Your help would be greatly appreciated.

    Hello

    Are able to run fix it?

    You can also post your query in Microsoft solve this forum. Please visit the link below to find a community that will support what ask you:

    http://social.Microsoft.com/forums/is/fixitcenter/threads

  • Error occurs during the installation of the update.

    I am running Windows Vista and am trying to install an Itunes + Quicktime update. I check the box to the left of the selection and click INSTALL. It passes through the part of the DOWNLOAD process, where a download bar downstairs is green. Then all of a sudden, an error and it says:

    "An error occurred during the installation of the updates. If the problem persists, choose Tools > download only and try to install manually. »

    I'm going to uninstall Itunes to try and reinstall, but when I click on uninstall on the Control Panel, another error occurs.

    "Another program is installed. Please wait until the installation is completed and try to reinstall this software. »

    Im not to install anything well. Help, please

    Hello TXMADELATINO,

    I recommend that you download the Windows Installer Cleanup tool. Click here to download the utility. You can use the utility to remove installation information for programs that were installed by using Windows Installer. Remember that Windows Installer CleanUp Utility does not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall on.

    Once you use the Windows Cleanup tool, then download the latest version of iTunes 9.1 and then try and reinstall your iTunes.

    If it does not help, you should contact Apple for support.
    http://www.Apple.com/support/iTunes/

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Error 1935. An error occurred during the installation of "Microsoft.VC90.ALT".

    original title: Error 1935. An error occurred during the installation of "Microsoft.VC90.ALT, version =" 9.0 30729.4148 "", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32". See Help and Support for more information. HRESUT: 0X8007054F

    Cannot download avg free trial version. Keeps giving me an error message. Can you help me?

    Hi angelwinks.

    Follow the steps listed in the link below and check if that helps: Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version: http://support.microsoft.com/kb/970652

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • read error message "error occurred during the installation of assembly «Mircosoft.VC80.CRT, version ="8.0.50727.4053»»

    We had problems with our itunes and now my son bought an IPOD touch and when we tried to install it we get this error message - an error occurred during the installation of assembly ' Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32, publickey Token ="1fc8b3b9a1e18e3b", process or Architecture ="x 86". See Help and Support for more information. HRESULT:0 X 80070422.  I was on the phone with apples for 2 hours uninstalling and installing itunes and continues to get the same message until finally, they said it's a matter of microsoft and I have to go help.  What now?  What does this mean

    Hi nina,

    1. did you of recent changes on the computer?

    2 are you able to install other programs on the computer?

    See the link below, download them and install the update, try to install ITunes and check if it helps.

    Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=766a6af7-ec73-40ff-B072-9112bab119c2&displaylang=en#Filelist

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 1935. an error occurred during the installation of Assembly 'policy.8.0.Microsoft.VC80.CRT.version = "8.0.50727.163".Guy = "win32-policy" publicKeyToken = "1fc8b3b9a1c18c3b'.processorArchitecture-'x 86' ' _

    I use windows vista.  I can't install adobe reader, kept getting Error 1606.  I was directed to use Microsoft fixit and today a new error... Error 1935. an error occurred during the installation of Assembly 'policy.8.0.Microsoft.VC80.CRT.version = "8.0.50727.163".Guy = "win32-policy" publicKeyToken = "1fc8b3b9a1c18c3b'-.processorArchitecture 'x 86' '

    Hello

    ·        Who solve this are you referring to?

    ·        Where do you find this new Error 1935?

    I suggest you to check the below link.

    http://kb2.Adobe.com/CPS/403/kb403465.html

    I also suggest you follow the steps mentioned in the article the Error 1606.

    http://kb2.Adobe.com/CPS/402/kb402867.html

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Setup AVG 1935 error. an error occurred during the installation of Assembly 'microsoft. VC90. ATL, version = "9.0.30729.4148", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32".

    Original title: uninstall avast anti virus and then install AVG anti virus

    I received the following error message when trying to install AVG anti virus after removing the 5.0 version 4.8 and installation, then after you uninstall 5.0, I tried AVG anti virus.     Error 1935. an error occurred during the installation of Assembly 'microsoft. VC90. ATL, version = "9.0.30729.4148", publicKeyToken = "1fc8b3b9a1e18e3b" processorArchitecture = "x 86", type = "win32".  If anyone has encountered this before?

    Hello

    Before upgrade you to the next version of AVG you will need to disable the resident shield. See the article below for more information.
    3882 update AVG 9.0 from AVG 2011 fails with Error 1935
    http://www.Avg.com/ww-en/FAQ-print.Num-3882
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version

    Original title: cannot install Antivirus

    At the configuration stage, it displays Error 1935 in assmbley version Microsoft ATL = 9'0 30739 4148 publickeytoken = iec8b3ba1e18e3b Architexture-86, type = win32, result: ox800736fd process

    Maybe someone can help with this problem.

    Thank you

    Allan

    Hi ADR14,
     
    1. what anti-virus program you trying to install?
    2. you have any other antivirus program installed on your computer?
     
    An unsuccessful installation of prerequisite Windows updates OR packages MSI custom could have on the faulty registry under HKEY_LOCAL_MACHINE\COMPONENTS keys
     
    Step 1:
     
    Uninstall any other antivirus program is installed on your computer, because that to avoid a conflict between two antivirus programs.
     
    Reference:

    Step 2:
    I suggest you visit the below Microsoft KB article provided and run the correction tool and see if the problem is resolved.
     
    Reference:
     
    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC90.ATL, version
    http://support.Microsoft.com/kb/970652 

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: An error occurred during the installation of the Assembly HRESULT: 0 x 80070002 during installation of iTunes 9.2.1

    Original title: iTunes error. Help, please? I'm desperate... (I posted this on Yahoo Answers, too, but I have received no help, so I go here)

    Hello

    I am trying to install iTunes 9.2.1 (for Vista 64-bit) on my laptop Vista x 64 bit. Whenever I have try and download it, however, it gives me this error: "an error occurred during the installation of assembly" Microsoft.VC80.CRT, version = "8.0.50727.4053", type = * win32 ", publicKeyToken ="1fc8b3b9a1e18e3b"," processorArchitecture ="x 86". See Help and Support for more information. ' HRESULT: 0 X 80070002.

    Here is a picture:

    http://i37.Tinypic.com/144brrp.jpg

    I tried to solve it using various methods like using 7 - zip, download Microsoft Visual c ++ 2005, etc., but they do not seem to work... I don't have iTunes on my PC yet, just setting up because the facility retains default. Can someone help me please? I'm desperate...

    Here are the links that I tried to do my iTunes to work:

    http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/thread/beeceb19-69cc-4044-94F0-591feec04626/

    http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/c1359ee5-e18d-4512-8BFF-890936db2810

    http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/f4dd5033-9bcb-4788-B100-5e98bd80f6bf

    Hello myducks,

    To answer your question about the SFC command, follow these steps:

    First of all, we run System File Checker to see if you have a corrupt file system.

    Click Start
    Open an elevated command prompt.

    To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
    If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
    At the command prompt, type the following command and press ENTER:

    SFC/scannow

    This will check for any violation of the integrity and repair any damaged operating system files.

    Then restart your system.

    Please see the article (KB) knowledge base if you find corrupted files:
    Article 929833 - how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    If you were able to successfully run the SFC, then run chkdsk:
    1 disable any security software before you attempt to upgrade or do a clean install.
    2. make sure that your computer is updated (devices and applications)
    3. disconnect all external devices before installing.
    4. check your hard disk for errors:
    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: chkdsk /f /r
    When you restart your system, your computer will be scanned for errors and will try to correct them.

    In this forum, we are unable to connect to your computer remotely to help solve your problem. However, if you feel you need more support, you may want to open a business of pension paid with Microsoft. I will include the support options below, so you can choose yourself.

    http://support.Microsoft.com/default.aspx?scid=fh;en-us; CNTACTMS

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • An error occurred during the installation of assembly__ ' Microsoft.VC90.CRT, version = "9.0.21022.8", publickeyToken = "1fc8b3b9a1e18e3b", _ processorArchitecture = "x 86", type is "win32".

    I am running Windows Home Premium x 64

    I received this error when you try to install software: an error occurred during the installation of Assembly
    "Microsoft.VC90.CRT, version ="9.0.21022.8", publickeyToken ="1fc8b3b9a1e18e3b"

    processorArchitecture = "x 86", type = "win32".  See Help and Support for more information.
    I've done several hours of digging, but all I could find relating to this is for Vista, but that's what I could find:
    the Trusted Installer is running with a 3 (manual) setting in the registry
    I renamed my C:\Windows\SoftwareDistribution directory
    I run the installer by cleaning and painfully crossed the line-by-line entries and got rid of the old stuff that hanging on.
    I removed any installation of dot net I found and then ran the Win 7 Dot Net Fix Tool and then reinstalled 3.5 SP 1
    I uninstalled all the Visual C++ runtime components as well.  Now, when you try to reinstall the hours VC ++ Run, I get this momentum.
    I'm really tired.
    Here is the result of the dd_vcredistMSI7D41.txt file in my (severely truncated) temp directory
    [code]
    MSI (s) (D8:88) [04:09:01:577]: installation error (sxs): Please look in component based newspaper on maintenance located a-167844744ndir\logs\cbs\cbs.log for more diagnostic information.
    «Info 1935.An error occurred during the installation of assembly ' policy.9.0.Microsoft.VC90.ATL, version = "9.0.30729.1", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type = "win32-policy"" See Help and Support for more information. HRESULT: 0X8007054F. Assembly interface: IAssemblyCache, function: UninstallAssembly, component: {4E546509-41FF-349D-BF4B-CBED508E19E5}
    [/ code]
    I also see in the file:(severly truncated) C:\Windows\Logs\CBS.log
    [code]
    2010-04-02 04:09:01, error SXS Transact2 pending content detection failed with 0x8000ffff
    2010-04-02 04:09:01, info SXS uninstall Assembly: Microsoft.VC90.ATL, version = "9.0.30729.1", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32"
    2010-04-02 04:09:01, info SXS submitting uninstall transaction
    2010-04-02 04:09:01 00000242 awaiting CSI content of transaction information must be resolved, cannot start another transaction again
    2010-04-02 04:09:01, error CSI 00000243 (F) E_UNEXPECTED 29652 # of Windows::COM:CComponentStore:InternalTransact (...) [gle = 0x8000ffff]
    2010-04-02 04:09:01, error CSI [email protected]/4/2:09:09:01.518 (F) d:\w7rtm\base\wcp\componentstore\com\store.cpp(4389): error E_UNEXPECTED from function Windows::COM:CComponentStore:InternalTransact expression: ((HRESULT) 0x8000FFFFL)
    [/ code]
    Can someone please help with this?  I've seen messages like this all over the web, but nobody seems to know anything.  I pray that the Member States did.

    Hi Carl.P,

    SE for focus in the right direction, please provide the following information:

    (a) what program are you trying to install?

    (b) do you use the computer as an administrator?

    You can follow the steps mentioned in the link below that relates to a similar question

     

    Troubleshooting C/C++ Isolated Applications and Side - by - side Assemblies

    http://msdn.Microsoft.com/en-us/library/ms235342.aspx

    (Done mentioned steps refers to Windows vista, same procedure applies to windows 7)

    If the problem persists, please visit the link below to find a more appropriate community to help you solve the problem

    http://social.msdn.Microsoft.com/forums/en-us/categories

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Strange lines on Satellite C660 screen

    Hello I dropped my laptop Toshiba Satellite C660 and now half of the screen shows lines everywhere in different colors. My question is, if I replace the screen with a new one it will solve the problem. I found a screen that I think will fit. I'm real

  • Exchange optical drive with ssd - who to use for imac i8 caddy?

    I want to replace my optical drive with an SSD. I have an imac end of 2008 (model i8). No one knows exactly what optical Bay/caddy/box is needed for this task? This one will work? http://www.eBay.com/ITM/390605651415 Thank you very much! DN

  • X 230, Intel HD 4000, dock and three monitors, how?

    Hello I just got new X 230 (makes 12/12). It has intel HD 4000 and processor i7-3xxx-series. I also got dock (the usb3 support). I have foud some topics saying that x 230 would support 3 monitors, but how? I have 3 x full HD monitors, 2 of them is co

  • OS missing disk.

    I want my OS installed on my new hard drive but the drive anywhere to find, I have my serial number at hand. What do I do, my old hdd is already dead.

  • Can not find the drivers for pc

    HelloI recently installed windows 7 on my systemabove the windows 8 supplied with the machine, because I got so sick of windows 8. I am now having problems with drivers, I can't find for windows 7 because it came with 8 is installed. Also, I can not