-1074396080 color plans 'invalid image type' extract

Similar Questions

• IMAQ resample invalid image type

  Hello

  I'm rewriting an old non-versatile version of a VI. I don't have much experience but I have the old VI as a kind of model for what I do. It's weird, but even if I try to do things exactly the same way, they do not work.

  I acquire an image high resolution camera (IMAQ to acquire) which is too large (1280 x 1024). I want to resample (IMAQ resample) at 256x320px.

  I get the error message: error-1074396080 occurred in the type of IMAQ image resample not valid.

  The probe I put to read of the Src of the Image shows the image correctly and tells me that it is a 16-bit unsigned image. This should be a valid image type, right?

  Dennis

  Deneck wrote:

  I get the error message: error-1074396080 occurred in the type of IMAQ image resample not valid.

  The probe I put to read of the Src of the Image shows the image correctly and tells me that it is a 16-bit unsigned image. This should be a valid image type, right?

  No, not right. IMAQ resample does not support the type of U16 (at least until VDM2011). See help.

  Convert your image to I16 (if possible) before resampling.

  Andrey.

• invalid image type imaqdx

  Hello

  I hope that someone help me find the error in my VI. I'm changing the optical tracking workflow capability. Instead of part of the reading of a file, so I want to collect the camera recording.

  You will find attached the VI.

  Thanks for your help.

  Hello

  Your problem is the distribution of a bad image. It works:

  

  Your code is quite messy...

  In any case, I had an old example that I've modified, you may find it useful (tying for Labview 2010).

  Run the program, select the keypoints (hold ctrl + left click for multiple). When you select keypoints, add them (via the 'Add' button) and the execution of the main loop with "continue...". ', take care that the object of interest is not moving (you can reprogram it at your leisure).

  I hope this helps.

  Best regards

  K

• Invalid Image - AVI file type + monkey plan color extract + threshold

  Hello

  I don't have a lot of experience on LabVIEW so far... This may be the reason why I'm faced with the following problem.

  I would like to open an AVI file and turn to get that information. That's why I tried a 'easy' step by opening the file, view, by modifying the file (single color plane Extraction) and showing that one too, after that the avi image enters the threshold function and appears as well.

  I use LV10. And when I run the vi 1074396080 error occurs (invalid Image Type). I tried to use different avi files but it still does not work. What Miss me?

  Thanks for your help!

  My vi:

  

  and the error:

  

  Use IMAQ create for you another image buffer to save an image.  Give it the name in levels of gray or something like that.  Connect the output of IMAQ Create at the Dst Image IMAQ ExtractSingleColorPlane entrance.

  Use IMAQ create for you a third image buffer to save an image.  Give him the binary name or something like that.  Wire out of the IMAQ create the Dst Image IMAQ threshold entry.

  You can put the screws to create IMAQ on the diagram outside the loop, just below the existing IMAQ create.

  Bruce

• color to grayscale image

  can someone help me please.

  I am stuck on this problem.

  I have this program that would analyze and draw the overlay 'crosshair '.

  but I'm getting errror when working with color images.

  IMAQ game geometric pattern 2
  Invalid image type.

  

  I get an error "invalid model" when I tried your model. I have created a new. Try if it works.

• The color in printed images is not match the colors on the screen

  I've recently updated to an iMac, retina 5K and the colors in the printed images do not match the colors of the image on the screen. I use CS6 and the screenshot below shows that, in the window of the print settings CS6 image does not match the image of origin either, the original image on the left.  I've updated all print drivers, and the images are also too green/faded when I print them, or download them on Animoto or Mpixpro.  We tried a Spyder calibration system, and that did not help.  For now, I have to make a folder separate with "twisted" images that have increased the saturation and Communists to give them a normal appearance.  Does anyone else have this problem?

  

  Unless you have a current color profile for the display you are using and you have calibrated the printer for the specific of ink and paper that you are using, its not surprising there are differences. Without a color managed workflow screen and software have no information on what the printer can produce.

  The range Spyder products are not up to the task.

  The normal options for managing your color workflow are:

  1. using the X-Rite i1 photo system,

  2. purchase of a custom profile for your type of printer, paper and ink, done by a specialist in color management

  3 - Send your files to a professional lab that is capable of producing quality work.

• How to determine the image type in IMAQdx

  You can use the property IMAQ node to determine the image type when creating images.  However, when I try with IMAQdx I get 0 bits per pixel and I do not see a type as for IMAQ image.  I am creating 8-bit images when my camera is color.  How can I determine the image type of the camera file?

  

  Hi rammer,.

  IMAQdx exposes an attribute called "TypeOfImageInUse" that will give you the image type expected for the current settings of the camera. However, none of the functions that return an image IMAQdx will automatically convert the image to the format automatically, so you don't normally have to worry about this.

  I do not believe that the attribute is now directly exposed as his own property node, but you can use the CameraAttributes-> ActiveAttribute/ValueU32 those for questioning as any other attribute of dynamic camera.

  Eric

• Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is much too small.

  Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is far too small - the drawings are ok.

  Send to the printers tomorrow but pdf does not appear correctly! Any ideas? Please, I beg you!

  Please tell us

  -This page - is that he recorded in a graphic file? What type? If not, where is it?

  -How exactly do you send as PDF - what app do you use? and what are the measures?

• I get an error-invalid data type

  DECLARE
  CURSOR med_rec_cur
  IS
  SELECT *.
  OF temp_records_med;
  
  p_success NUMBER;
  strQuery VARCHAR2 (10000);
  v_count NUMBER;
  v_filename temp_records_med.filename%TYPE;
  
  TYPE med_rec_tab IS TABLE OF temp_records_med % ROWTYPE;
  
  ErrNum NUMBER;
  
  Slno_tab TYPE IS a TABLE OF VARCHAR2 (100);
  
  v_med_rec_tab med_rec_tab;
  dml_errors EXCEPTION;
  v_slno NUMBER;
  v_all_slno VARCHAR2 (1000);
  v_slno_tab slno_tab;
  tba_slno temp_records_med.slno%type;
  
  BEGIN
  OPEN med_rec_cur.
  
  LOOP
  BEGIN
  EXTRACTION med_rec_cur
  LOOSE COLLECTION v_med_rec_tab LIMIT 1000;
  
  FORALL I IN 1... v_med_rec_tab. COUNT SAVE EXCEPTIONS
  INSERT INTO meddetail
  VALUES v_med_rec_tab (i)
  RETURN slno BULK COLLECT INTO v_slno_tab;
  
  EXCEPTION
  WHEN dml_errors
  THEN
  v_all_slno: = ', '. To_char (v_all_slno);
  END;
  
  EXIT WHEN med_rec_cur % NOTFOUND;
  END LOOP;
  
  CLOSE Med_rec_cur;
  
  INSERT INTO BOSSDRAGON - INVALID DATA TYPE
  SELECT * FROM TEMP_RECORDS_MED WHERE SLNO NOT IN (SELECT tba_slno FROM)
  (TABLE (CAST (v_slno_tab AS slno_tab) tba_slno))) ;
  
  END;
  
  Published by: user8731258 on Sep 6, 2010 23:14

  Casting will not change the fact that you have a local collection type in a SQL statement, which is not allowed. You can create a stand-alone type with CREATE TYPE? Or use something like SYS. DBMS_DEBUG_VC2COLL that is already defined.

  You don't need a CAST explicitly in the TABLE expressions after around Oracle 8i.

• Version with ControlLogix - link cRIO (implicit messaging), "(Code 16 #0315) problem" connection request error: invalid segment type ""

  I have developed and delivered a system in Germany several years ago.  He worked then.  But the cRIO was damaged and replaced by a newer model, and does not now.  I suspect (and Support technical OR agree) it's a problem of software version, which could be solved with the NOT-MAX Software Installer.  But I do not have access to the system myself, and correspondence is slow and tedious.

  The original system was a cRIO-9073, developed with LabView 2009.  He used the implicit Messaging.  The ID of Instance, sizes, IP addresses, etc everything has worked very well.

  The current system is a cRIO-9074, with LabView DURATION 14.0 (I guess that LV 2014), Scan Engine 4.3, NI - Industrial Communications for Ethernet/IP 14.0.0, etc.  Programs FPGA and processor are responsible and seem to work in the cRIO.  The "EthernetIP Set Assembly Instance Data.vi' will return no error.  But the PLC just pointing out "(Code 16 #0315)" connection request error: invalid segment type "."  We looked at intellectual property (the mistake was different), sizes and body #s.

  The PLC doesn't have to all be modified.

  Anyone know if there is no problem of compatibility with LV-2014 and Ethernet/IP 14.0.0?  Or if there are all the other required packages?

  I am including the NOT-Max reports.

  Hi ZX81

  To help you 2009 application to work with the new cRIO, you must deploy it to the device. You must in order to deploy the cRIO, make sure it has the same versions of software that you used with the old cRIO.

  You can format the cRIO NI MAX and deploy the application of LV, 2009. However, if you do not have access to the cRIO or your client does not have the necessary software, you can deploy the application in another cRIO with software (cRIO same model and same modules as your client) and create a picture of it and send it to your customer so that it can deploy the cRIO even without the software on his computer. The following document explains how to do this.

  Utility of RAD

  WenR

• IMAQ CREATE, image type setting

  Hello

  I'll put my f031b Pro Guppy camera pixel format.

  It seems too long I put attributes with property nodes: pixelformat as Mono 16, no matter what I put in the "IMAQ create"--->"image type", I still get output 16-bit gray scale.

  Is this correct?  What can control when I change the image type to "IMAQ Create"?

  best,

  Wen

  If the image is passed directly to the Image to get VI of IMAQdx, the type is unimportant since it is converted by the driver when it fills with data. Only the border size is relevant.

• IMAQ Low pass filter failed with invalid image border.

  Hi Expert,

  I'm trying to use the imaqLowPass function. I expect that the input image would have been handled by the low pass filter.

  But it is a runtime error showed 'invalid image border.

  Can someone tell me what is happening?

  Problem solved.

  I add a border to the image.

  He must take care of the size of the border and the size of the filter.

• charge of Picasa folder with the message "invalid image."

  disaster

  Windows xp that I screwed up somehow on Picasa, and now I have a file that loads with the message "invalid image."  Is it possible that I can fix these photos

  Contact support Picasa.

• Invalid Image path

  Hello

  I started having a few problems icon with an existing working version of my application that has already been built and uploaded to Apple without problem. When I now build this, I get the following errors of two icon;

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  ITMS-90032 ERROR: "invalid Image - no image found at the location path listed under key"CFBundleIconFiles":"[email protected]"

  I managed to build and release this same .zip (expect a version and the version code change) in mid-August, but he now will no longer build. I have run back through aid and checked my path to icon, everything seems in order (and all the other icons are working / not to Miss).

  As follows, the referenced files in the config.xml file are different from those that Apple reported lack;

  < platform name ="ios" >

  <!-iPhone Spotlight and icon settings->
       < icon CBC = "res/icon/Icon-Small.png" width ="29" height ="29" />

       < icon CBC = "" res /icon[email protected] " " width ="58" height ="58" />

       < icon CBC = "" res /icon[email protected] " " width ="87" height ="87" />

  ...

  <!-IPad Pro->
  

       < icon CBC = "res/icon/Icon-167.png" width ="167" height ="167" />

  </ platform >

  I'm not referencing or other icon files Apple claim are missing for example; "[email protected]" and I can't that assume it is something BMPS incorrectly adds to my package when compiling?

  Note:

  I checked the build log and it seems to ignore my request for [email protected] one copy only the small and the small@2x:

  CopyPNGFile build/myapp.app/icon-small.png myapp/Resources/icons/icon-small.png

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser /project/myapp/Resources/icons/icon-small.png /project/build/myapp.app/icon-small.png

  CopyPNGFile build/myapp.app/ [email protected] myapp/resources/icons/[email protected]

  / Project CD

  /Applications/XCode.app/Contents/developer/usr/bin/copypng-Compresser/project/myapp/Resources/icons/[email protected] /project/build/myapp.app/ [email protected]

  Does anyone have any ideas or suggestions?

  See you soon.

  PS: PGB - app id is; 2244914

  Fixed - I was still building with an older version of Phonegap (5.4.1) for plugin compatibility and have increased now that 6.3.0, it includes such icons as expected.

  My guess is Apple now requires these files (from my generation) and Phonegap did not know what were these the 5.4.1 version.

  See you soon,.

• Several node Plugin - invalid attribute type: properties

  Hi all

  I have installation multi-user plugin. The workflow fails with the error "invalid attribute type: properties. One of the parameters on the flow of working remotely is a "Properties". It works fine without setting of type of properties. Y at - there no limitations on the types of parameters for multiple node plugin.

  Thank you

  Hello

  Looking at the source code of the plugin multi-Node, it seems that not all existing parameter types are supported, including Properties and the properties of table /. Not sure if this is the case of the design, or if it is an incomplete implementation / bug (it's probably the last).