1080 p 60 fps video stutters when played on television

Similar Questions

• 24 fps video does not play in the source CS5.5 without jerky movement monitor

  Problem: 24 fps video does not play in the monitor source CS5.5 without jerky movement. 30 frame will play well. I took the same shot 24 fps, using the same exact configuration settings and it played in my CS5.0. No problem. I have them side by side and checked to make sure everything was EXACLTY the same. The 24 frames per second call played smoothly in the monitor source CS5.0 Panel. Can someone tell me what the solution might be to get the CS5.5 play smoothly? When I visited on the timeline in CS5.5 he played smoothly on the timeline. Puzzled.

  > nikon d7000

  This is probably the cause.

  See for a workaround:

  http://helpx.Adobe.com/Premiere-Pro/KB/Nikon-D7000-footage-stutters-playback.html

• Each song st-st-stutters when played in Media Player

  In the last days, all the songs played in Media Player (11) has been stuttering for a few secondsexactly 20 seconds before the end of the song and there a few seconds of pause between tracks where before it would run smoothly between tracks. It is not some stuff in my library, it happens to titles played via the internet, so, although the songs played on a CD through Media Player are not affected.

  I checked the driver and codec updates, I ran a cleaner registry (recommended somewhere on this site) and I drove back two points, all without success to restore. The last restore point was on a date prior to the boot problem. I spent several hours trying to resolve this irritating glitch today and my head is striking.

  Of course, the only thing I could not do is to uninstall and reinstall Media Player because the system won't let me!

  Please help before I have to use iTunes as my default player.

  In the last days, all the songs played in Media Player (11) has been stuttering for a few secondsexactly 20 seconds before the end of the song and there a few seconds of pause between tracks where before it would run smoothly between tracks. It is not some stuff in my library, it happens to titles played via the internet, so, although the songs played on a CD through Media Player are not affected.

  I checked the driver and codec updates, I ran a cleaner registry (recommended somewhere on this site) and I drove back two points, all without success to restore. The last restore point was on a date prior to the boot problem. I spent several hours trying to resolve this irritating glitch today and my head is striking.

  Of course, the only thing I could not do is to uninstall and reinstall Media Player because the system won't let me!

  Please help before I have to use iTunes as my default player.

  ============================
  The following article might be
  worth a visit:

  Windows Vista-
  How can I stop my music to jump
  or breaking up when I play it?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Video distortion when playing DVDs on Windows Media Player 12

  I have indserted a Comercial de DVD in my DVD player to play a movie on Windows Media Player 12.  When the video came out, it was thousands of multi-colored square blocks.  I tried receting on WMP options, in the case where I changed a setting trying to do something.  I checked in WMC as well and it does the same thing.  I checked several discs defferent.  I checked the updates.  I even ran several viruses, spyware and Root kit scanning with luck now.  I scanned my registry to find errors.  I'm out of ideas.  Can someone help me please?

  I discovered that a major alteration in the partition of OEM software was interfearing with the functioning of Windows 7.  So I reinstalled windows 7 delete all partitions on the disk.  This not only corrected this problem, but 98% of the other problems I had with Windows 7 and its components.  Although the internal DVD player has partially failed and did not read something more then a bootable disc (which I am happy that it works always in that my external DVD writer is not recognized as a drive bootable BACK), my external drive is now able to read everything properly in Windows 7 and I can now use any program including WMP to play all DVD discs or any other disc I need to read.

• 4 long minutes, 1080 p, 30 fps video with gigabytes 38

  This is the first time that I use After Effects, I use it to put a sound spectrum on a fixed image of a 4 minutes song, I did. the resoloution is 1920 x 1080 and the frame rate is 30. the video resumes gigabytes 38 when recording in an avi file. I'm never going to be able to download something big to youtube with my crappy internet. 38 gigabytes is normal for videos like this?

  .

  I bet you made without reading about compression and you just use the preset default LOSSLESS. Lossless will give you almost a movie file uncompressed will probably not playback in real time. You can use it to make a shippable product by using the Adobe Media encoder, but I suggest that you start here and read the section on rendering: Basic AE

• Cropping of the video when played on television

  I noticed that when I edit 1920X1080i film that video is displayed in the monitor window, I can see the whole picture. But when I've made and play from a Blu - ray disc, I noticed that the image is cropped. Especially noticed at the top. Even if it's probably cropped on all sides. Is a parameter when creating the disc or make video or is it a normal thing and I should adjust when I turn the raw images?

  No, it's a problem reading of readers ROS and TV. Then compensate during filming.

• dv4 1120us bodyguard stuttering when playing any kind of sounds

  I have a new dv41120us. I use media monkey as my Media Player. During playback of songs, it will start stuttering and cracking in the music on all the 5 min. I opened the Task Manager and saw that sometimes the processor worked up sometimes not. It happens on everthing that I play the sound out. Use also to dj via a device usb, same problem.  I saw this in all directions on the internet. Tried all the fixes, and including disabling aero switching to Classic view, updating the audio drivers and turn off the audio improvements, I found. I'm looking for a real that such solution that it is supposed to be my new computer to work for djing and obviously I can't have this stuttering all the time. If anyone has any suggestions or a real fix for the problem I would be very appreciated

  I had this problem on my new dv9927 (with external speakers or headphones).  Tried to update the drivers and all.  Then someone suggested to turn off the Wi - Fi adapter.  Who did it, and once more, the sound was pure.  It's a BroadCom adapter and I thought it was faulty, but since the fix for the problem, they published a pilot day and now its pure with a Wi - Fi on or off.

• Why my EOS 60 1080 30 fps video freeze and stall when changed in Final Cut Po?

  When editing from my EOS 60 1080 30 fps video on Final heart Pro 7.3 a stop on unwanted image appears at the end of each clip. The video is also difficult to play, often stalling after each change. Generally video is really the struggle against the program, even cleaning. I tried different Final Cut of the Codex and retired the Elgato Turbo video but the problem remains. Of course, there is some sort of sync problem, but I can't find or understand why it is there.

  Thank you

  Clark

  Here: http://www.usa.canon.com/cusa/consumer/products/cameras/slr_cameras/eos_60d#DriversAndSoftware

  Go to the driver & software, choose your version of MAC OS, choose software, download: EOS MOVIE Plugin-E1 for Final Cut Pro 1.4

  It has the manual inside I think. But you can install it, restart your final cut pro and edit your movie. See if it solves your problem. Let us know.

  PS: Here is the Asia of Canon's Quick Start Guide: http://gdlp01.c-wss.com/gds/7/0300004927/03/finalcutpro-plugin-e1-14-e-en.pdf

  Good luck.

• Should what predefined order I use when using videos of 1920 x 1080 29.97 fps xperia z5?

  Should what predefined order I use when using videos of 1920 x 1080 29.97 fps xperia z5?

  Someone has an idea?

  Must I provide additional information and if so what?

  Thank you!

  Hi Michel,.

  You may need to check this: FAQ: how to choose the right sequence settings?

  Kind regards

  Navdeep Pandey

• Yoga 2 Pro stutters when you play videos

  Hey guys,.

  I was wondering if anyone else has this probem stuttering when I look at videons on the yoga 2 pro? I configuring i5/256/8 GB of ram, but really, watch videos should not be a problem for the configuration even lower?

  Any help would be appreciated.

  It was just a normal 480 resolution on youtube video. He had nothing to do with the settings manager energy wasn't endurance mode, cause I just use my laptop under normal parameters. Actually, I found another thread where the guy had the same problem, and fixed it by increasing the size of virtual memory file / page. I followed his instructions, and it seemed to have done the trick. Interestingly, the virtual memory is supposed to be 1 or 1.5 times your ram, but my virtual memory file size / page is only 1 GB from my 8gbs of ram. Maybe it has something to do with the lozenges of limitation, who knows! The solution/thread I found is here: http://forums.lenovo.com/t5/Idea-Windows-based-Tablets-and/Yoga-2-Pro-HD-playback-freezes-other-appl... I hope this helps someone out there.

• Windows 7 Media Center - stuttering/video freezing while playing Internet TV

  I recently installed "clean" Windows 7 Edition Home Premium on XP MCE 2005.  I have serious problems with the video stuttering and freezing frequently during playback of the titles of Internet TV, for example, old episodes of Star Trek.  Results often loud squawk a Duke during freezing.  Sometimes it looks exactly like a CD does when he gets stuck on an imperfection and goes into a fast loop.  The irony is that I can read the exact same titles via Fancast, and have no performance problem either.  Stutter/freeze occurs only during playback via Internet TV in Media Center.

  My system is:
  Intel motherboard - tried two different BIOS D945PVS (according to newest and newest).
  Processor Pentium D 3.0 GHz
  3.0 GB RAM 667 MHz
  nVidia GeForce GT 220, 1 GB of VRAM, connected via HDMI for display in 1080 p (latest verified driver) (second video tried - card was first nVidia 210, 512 GB of VRAM)
  Installed at the Manitoba Intel Gigabit network reports, cable and adapter gigabit connection speed
  Three different tried sound options - Creative Soundblaster X - Fi Elite Pro; MB base IDT HD Codec; nVidia HD Audio, with video/HDMI card).

  I updated all the drivers and installed all Windows updates.  I could really use some help.  I did everything I can think of short of a repair upgrade/reinstall of the operating system.  Thank you, in advance, for your help.

  Well, finally solved the problem.  It turns out that lower level nVidia graphics card I tried (the 210 and GT220) couldn't handle Internet TV via Windows Media Center to the high resolution, I tried to use (1920 x 1080, in my case).  I pulled a map of greater chart end of one of my other computers (a nVidia 9800GT) and Internet TV has played without incident a few hours.  I don "t know where the dividing line is between inadequate and adequate performance GPU, but the GT220 (which I think is about equivalent to a 9400GT) did not work and the 9800GT has done.

  So, if you have a skip/stutter problem, either try a lower resolution or a more powerful card.

• Need help for export to 1080 p 60 fps into 14 components (the video is silent)

  I just bought 14 items two days before, so I'm incredibly at this news. In which case it is important, I run 64 bit Windows 10.

  So, I create a 3D animation in MMD (MikuMikuDance), a program of 3D animation to be animated music videos.

  Following another problem with MMD, if I want to make the animation to superior qualities, I need to make it into pieces - if it's 1080 p 60 fps, then the pieces is executives from 1999. Once it restores a 2000th image without taking a break, the program crashes. For the same reasons, I can't use the audio in the original clip, so I need to add it separately.

  So, I use editing programs to combine these pieces and audio into a single file, I can then save on my hard drive and download on various websites. That's what my edit looks like so:

  

  When I tried to export the file to MP4, I discovered that there is no integrated adjustment for export to 1080 p 60 fps; I could do 720 p 60 fps or 1080 p 30 fps, but 1080 p 60 fps was not an option. I decided to customize a setting for 1080 p 60 fps, but when I watched the videos, it was 1080 p 60 fps, but it is also completely silent, with no sound whatsoever. At first, I wondered if it was just a fluke and it made again. He was still silent. I restarted my computer, and left the computer alone while it has made, but he was still silent.

  A test, I used the setting for 1080 p 30 fps, and while it was not the quality I wanted, the audio worked well in this one. So, the problem - I guess - is with my fps setting custom 1080 p 60. If it works on an integrated framework, but not a customize one, then this is the only conclusion I can come to.

  Here is a series of screenshots showing my custom setting:

  

  Because you can't see it all, the name of the preset is "MP4 - H264 1920 x 1080 p 60 fps 15Mbps Medium ' (I just changed pre-set at 60 fps 1080 p and reflects by changing the 30 in the title to 60; "I do not understand most of the title); and in case it is too small to see, the custom settings are:

  Resolution: 1920 x 1080

  Format: H.264

  Frame rate: 60

  Audio: MPEG, 160 kbps, 48 kHz, stereo

  Lasted: 3 minutes, 34.34 seconds

  Flow: 15 MB/s

  Now, here's the complete list of parameters for the screening:

  

  

  

  

  So, which-if whatever this is-am I hurt? Should I change the bitrate or something?

  Try to set your audio Dolby Digital instead.

  But a lot depends on a lot.

  I don't have "everything about the specs of the MMD video that you use in your project, but which could also be a factor in this problem."

  And so couldn't your video settings, personalized 1920x1080p60 MP4, which can not be in the capacity of the program.

  And no matter what video player you play your MP4 on. Unless you use a good versatile player like VLC Media Player, you don't hear no audio from your video could be due more to the media player as the audio file itself.

• Export of 1080/50i AVCHD to mpeg 1080/50i - video stutters

  When you export the sequence in mpeg format, 1080/50i video stutters to 2 to 3 points. So I exported 3 parts of the sequence: no video stutters. Then I create a new sequence based on the result of the 3 video, export clips complete sequences as well as the video stutters exported again in some places.

  Can anyone help?

  Tom

  I suggest that you download and install VLC media player, it's free

  While that installation uncheck options want to add to your internet explorer.

  Then play the movie with VLC and report back if you stutter

  Windows Media is notorious for replaying is not media files very well especially those of high data rates and PAL settings file (1080/50i)

  Col

• Choppy video export, DNxHD Codec 1080 p 24 fps

  Hi all

  having a problem exporting my video.  I tried a large number of parameters, but I'll give you a summary:

  in MPEG, h.264, audio keeps get synchronized.  In addition, appropriations twinkle pretty bad (I'm using a Photoshop file and it scrolling to the top of the screen with position keyframes)

  I also tried to export in Quicktime MOV format, using uncompressed YUV and DNxHD codec.  I have been using the project of 1080 p 24 fps downloadable predefined found here.  I got the software codec here.  When I export the video, it plays back very choppy in Quicktime 7 player.  Is this just a problem of Windows?  He would play smoothly on a Mac?

  Toshiba Satellite intel core i3 4 GB ram Edition on a 320 GB internal hard drive, backup on a 1 TB USB 2.0 external drive (edition was in fact run smoother when the source files are on the internal drive).

  images of canon rebel t3i 1080 p 23.98 FPS

  Any help is appreciated.  Thank you

  The biggest problem is that you're editing 1080 p 24, something which is not supported in Premiere Elements. You're very probably see interlacing issues.

  What project settings that you see in the release/project preferences?

  I would say that everything indicates that this plugin preset does not match your video source.

• Apple TV 4th gen: video stutters/buffers when bluetooth connected to headset Motorola SS9 - HD

  Nice day!  My new Apple TV 4th gen: video stutters/pads several times when connected in bluetooth for headset Motorola S9 - HD.  Normal play time before the start of the stuttering/buffering is about 15 seconds.  The headphone stops also in stuttering.  After that the buffer of spinning button stops, all goes back to normal until the next cycle.  This happens on all video activity of any source.  If I disconnect the headset in the bluetooth settings, everything is completely OK.  This is a brand new Apple TV 4, with the latest updates.  This stuttering also occurs when of the Air Airplaying of my iPad, or if playback purchased iTunes movies.

  The main reason for the purchase of this 4th Apple TV:

  1. availability of the App Store of Apple TV.

  2. ability to connect his bluetooth headset and ensure the privacy of the other

  3. the beautiful screensavers.

  4. menu main display and interface.

  5. Siri Remote.

  Others have run into this problem?  Is it known to be a workaround?

  Thank you very much for your time.

  Bill

  I wanted to add to my previous question that I tested the speed of the WiFi using my iPad Air in the same room with the Apple TV 4. Used SpeedOf.Me Lite and went up 23 Mbps download and shipping.

  Should have mentioned this in the original post.

  Bill