11.1.1.4.0 - inline popup: disabling the default undo action...

Similar Questions

• Disable the default ISAKMP policy?

  Y at - there no way to disable or change the default ISAKMP policy?  I created the number 20 of the police, which is used in a VPN site-to site in vain for a quarterly PCI analysis the results come back in due to stage successful 1 authentication with encryption DES/DH768.  I reproduce these results with the help of ike-scan with explicit parameters OF/DH768.

  This is a 2600 router and I just upgraded to 12.4 IOS (23) because I came across (http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html) Cisco documentation which says that 12.4 (20) introduced the "no crypto isakmp default policy" - but I do not see this command still available to me.  Here are the results of sh crypto isakmp policy:

  Priority protection suite 20

  encryption algorithm: three key triple a

  hash algorithm: Secure Hash Standard

  authentication method: pre-shared Key

  Diffie-Hellman group: #2 (1024 bits)

  lifetime: 86400 seconds, no volume limit

  Default protection suite

  encryption algorithm: - Data Encryption STANDARD (56-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: Rivest-Shamir-Adleman Signature

  Diffie-Hellman group: #1 (768 bits)

  lifetime: 86400 seconds, no volume limit

  Any help would be greatly appreciated!

  Hello Anthony,.

  I saw the link you provided.  It seems that this command was introduced in12.4 (20), T... note the T.  This indicates that it is only in the T-train train or technology and only seen in some other 12.4 T code or the train from 15.x newert.

  You say that your router is runnign 12.4 (23) implicitly code Mainline (M).

  The last T code for 2600 seems to be a 12.4 (15) T, so it does seem that you can enable this feature in order to disable the default policies.  It also seems that the 2600 series retired as no new code is released March 27, 2010.

  http://www.Cisco.com/en/us/products/HW/routers/ps259/prod_eol_notices_list.html

  Looks like you can be out of luck and may need to look for in buying a newer model router to get the newest software support and the ability to disable the default isakmp suite.

  Of course, it is noted that while they can establish a session ISKMP, however, they will really be authenticated by the router in message MM 5 as most people use internal cases for certificates on the VPN.

  I hope this helps.

  Kind regards

  Craig

• How to disable the default ISAKMP on Cisco 2800 router policy

  I'll have a check point asking me to disable or delete the policy by default ISAKMP on my router. I tried to do, but I got an error that the command is not supported as below:

  

  If this is not possible on my router that has a version of IOS:

  

  So, is it possible to upgrade my router IOS to the latest version to solve this problem, which is:

  "c2800nm-advsecurityk9 - mz.151 - 4.M6.

  If that does not solve my problem, I have an official document from CISCO, which on my router, which is not supported "Disabling the default ISAKMP policy.

  I would really appreciate your reply guys.

  Thanks in advance,

  Hi Ebrahim,

  Version 15.1 (4) M6 supported by the command "no default crypto isakmp policy."

  Before you run 'no default crypto isakmp policy. "

  :

  Router #sh cry default isakmp policy

  IKE default policy

  Default priority protection suite 65507

  encryption algorithm: AES - Advanced Encryption Standard (128-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: Rivest-Shamir-Adleman Signature

  Diffie-Hellman group: #5 (1536 bit)

  lifetime: 86400 seconds, no volume limit

  Default priority protection suite 65508

  encryption algorithm: AES - Advanced Encryption Standard (128-bit keys).

  hash algorithm: Secure Hash Standard

  authentication method: pre-shared Key

  Diffie-Hellman group: #5 (1536 bit)

  lifetime: 86400 seconds, no volume limit

  .

  .

  .skipped output

  After:

  Router (config) #no cry isakmp policy default

  default router #sh policy cry isakmp

  Router #sh crying political isa

  World IKE policy

  *****

  If you are upgrading, you should be ale to delete default isakmp policy.

  Thank you

  Shakur

• How to disable the default e-mail account?

  Hello all, thanks to you I downloaded K9 & it works fine - TY much. The only problem I have is that I get now 2 sets of emails, 1 of K9 & one of the default email application. I know it should be easy to do, but I do not know how to turn it off.

  Help, please.

  Ty

  Kind regards

  JIm

  JIm

  You cannot disable the default Gmail account.  It is obligatory on the phone.  However, you can turn off notifications in the Gmail app.  That should eliminate the second notification.  Open the Gmail app and press Menu-> settings and uncheck the box to mail notifications.  This should take care of your problem.  I hope this helps.

• disable the default title window tab order?

  I have a popup that extends from the window of the title. I want to disable the tab order in the component. When I tried accessibilityEnabled = 'false' tabEnabled = 'false' nothing has worked.

  RAS that I'm trying to do is, to implement my custom component tab by capturing the keyboard events and make setFocus() on the next compoennt n of the table which requires the update. How would I do that?

  You should be able to get the FocusEvent.KEY_FOCUS_CHANGE event

  installation of a listener in the capture phase and call preventDefault() on the

  event.

• Right click menu disabled the default channels

  I created a right click menu with some Menu items. When I entered this event as well as my default items menu items appear as copy the data, description and mouthpiece smooth updates.

  The question is how to disable this default items

  If you want to completely remove the items in the list, you can create your own custom menu.  Select custom on the drop down menu, as shown below and recreate your menu.

  

• Disable the default function of the button 'Back' for Android.

  Hello!

  I tried SO MANY methods to PREVENT the default function of the previous button in Android, but without success

  It is one of the codes that I have used without success:

  stage.addEventListener (KeyboardEvent.KEY_UP, optionsKey, false, 0, true);

  function optionsKey(ke:KeyboardEvent):void
  {

  If (ke.keyCode is Keyboard.BACK)
  {

  ke.preventDefault ();
  ke.stopImmediatePropagation ();

  Make my own code below...

  }

  }

  I use Flash Cs6 , 3.2 Air for Android , testing on LG Google nexus 4.

  When I use the flash Simulator, it works great! Means the back button, let the App back to the previous step (as I expect to do)

  But after I publish the apk (picture format: Auto, auto orientation, rendering mode: GPU), as soon as I press RETURN, it minimizes my app!

  (means that when I press the back button on my phone, the application to reduce to the minimum (not close!) to the bottom. when I reactivate / click on it, I see the app is actually passed a stage (I programmed and planned), but I just CANT STOP the default MITIGATIONaction /by disabling my application after pressing the back button.)

  Anyone has any fileFla'I can see it in ACTION Please?

  Because I used several several codes and no luck yet

  Thanks and looking forward for your any kind of help...

  Post edited by: Pouradam

  I had my own answer with myself!

  in the code above. KEY_UP should be replaced. KEY_DOWN.

  simple!

• How to show popup on the filedownload button action

  Hi Experts,
  
  Work on jdev 11.1.1.3.0, ADF BC with rich faces.
  
  I need in my application as I need to display the pop-up window and at the same time need to download the file. as the selected lines in the table I have validation on each line, if the validation failed lines I need to show in the popup to the user as I have rows of validation success also these lines I need to generate a file and I want to download.
  
  I have written logic on the command button that has fileDownload, logical remaining here works very well except the popup display. can someone tell me how to solve this problem.
  
  Published by: user5802014 on August 19, 2010 17:57

  Hello

  I must admit that I did not sample myself. However, in your JavaScript code, I see 1 problem

  you have the following line in the script

  actionEvent.forceFullSubmit ();

  This causes a shipment of full page and a page refresh, which prevents the opening of popup

  Frank

• Disable the default wireless on Acer Aspire 5741

  I have an Acer Aspire 5741-5698 running Windows 7.  I never want to connect to wireless internet.  I want to only rarely connect with a wired connection.  I can disconnect the wireless by pressing Fn + F3, but I never see a "Launch Manager".  The problem is when I turned off the computer and turn it back on, it by default, a wireless connection.  I went to manage networks wireless in Control Panel and manually selected connect to my home network.  It does not work.  How can I stop to automatically connect wireless?

  Go to the device, click Manager right on the wireless, then click on disable. When you want to use the wireless go back and click Activate.

• How to disable the message "Treatment Action..."

  Hello
  
  Is there a way to disable 'Action transformed' message... it appears after a treatment action...
  
  Thanks in advance

  Hello
  In the part of the page. Uncheck 'include the success of process message. "

  I hope this help you.

  Good bye
  Robert L

• HP Pavilion Notebook Gaming -: how to disable the default f key functions

  Hello, I'm a gamer so I need to use the f keys in some games, BUT I can't use the f in game because it reduce my mess of brightness with my sound and much more.

  so, how can I change the f keys, reach the deafult option, I have to press the fn key AND the f key?

  Thank you very much!

  Hello

  It can start pretty quickly

  Try the next method.

  Hold the left SHIFT key you click Shutdown to temporarily prevent hybrid boot.

  Let off the laptop computer for 10 seconds.

  Start by typing esc button permanently as soon as you press the power button (do not wait for the prompt) and see if it will access the start menu - if that is the case, select f10 to open the Bios Menu.

  Kind regards

  DP - K

• I want to disable the default e-mail account in outlook 2003 so I'm prompted to select an account before sending a message.

  I use outlook 2003 as my email on XP client. I have 7 settings of accounts (me, wife and children, junk etc.). WE are simply not enough disciplined to do not forget to change the account every time we want to send a mail so that I find myself sending stuff that my wife if I set the default to her and she sends me stuff if we put in place for me. Is there a way to eliminate the fault and get Outlook to ask which account use?

  Hi Palcouk,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  . Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to disable the default action with ButtonField

  Hello

  Here's what I get "my custom action" when you click on a button:

  FieldChangeListener listener = new FieldChangeListener() {}
  ' Public Sub fieldChanged (field field, int context) {}
  my custom action
  };
  };
  ButtonField myButtonField = new ButtonField ("Test button");
  Add (myButtonField);
  myButtonField.setChangeListener (listener);

  But when I click on the button shows a list of 3-point default choice. How can I disbale this list?

  Thank you.

  Something like that...

  ButtonField myButtonField = new ButtonField (button "Test", ButtonField.CONSUME_CLICK);

• Disable the window "program does not.

  I have a problem for Windows 7 running a previous custom program.  I have a touch screen program that is running in a public space.  When the user quickly touch the screen more quickly that the program can meet a "x program has stopped responding" window opens. The user is then given the option to wait (good choice) or end of program (bad choice).  Is there a way to disable this popup, disable the option "end of program" or automatically choose the option 'wait '?

  Thank you!

  If she's not here, he's just going with the default value of 5 seconds.  You can create this value and set it to your liking.  Right click on a box blank and choose "new / string value.  Call it as 'HungAppTimeout '.  Double-click it, and then set it to the length you prefer.  It is in milliseconds, so if you want to wait 30 seconds before considering an application to be hung, set to 30000.

• How can I disable the "Awesome Bar" altogether. I don't want any of this feature.

  I WANT an address bar. I DON'T WANT an "Awesome Bar". In previous versions of FF, I was able to NOT SEARCH from the address bar. Now [FF 24 vs FF 17] I can not disable this rather undesirable behavior.

  I solved the problem...
  There was misconduct 'key' left by installing and removing a toolbar for the search engine. The tag has been removed from "subject: config ', and the behavior of the browser scheduled is back. It would appear that perhaps some of the 'key' tags have been renamed since my last version - which may explain why the wandering behavior began with an update of the browser.

  EDIT: BTW - the 'nothing' parameter should be set a monitoring framework that is not able to be changed by any other means. It must be set to replace all other behaviors. Moreover, it would be nice to have a Visual sense that obtained research is implemented off - by activating / disabling the default text in a "white" address bar of "search or enter the address" of "enter the address / search off»