Similar Questions

• QuickTime player converted the video AVCHD in BDMV file and now I can't see it

  My QuickTime Player converted my video card SD of AVCHD in BDMV files and now I can't see it on my computer as the BDMV file opens with QuickTime Player, any other application.  Help, please!  Thank you!!

  VLC can play BDMV on a Mac files.

  

• Software Adobe reader could not open 'example.pdf' because it is not a file type supported or because the file has been damaged...

  Software Adobe reader could not open 'example.pdf' because it is not a file type supported or because the file has been damaged... I act not I have a problem with the 11.0.0.379 version that I have used before and I think that this problem of due before 11.0.9 version and is on the later version, including the "Adobe reader DC" the workaround that I opened the PDF file of the file in Notepad and delete the text in the top starting by <? XML 1.0 encoding and save. This fixes the problem on small files, but it does not work in larger files... How should I solve this?

  If you generate files with anything before % PDF, these files are faulty. It is never allowed, but player used to tolerate it for compatibility with an obscure format Mac.

• CS4 won't open the files to an external hard drive. "not supported format or corrupted file?

  Hello

  I'm having a certain hard using first but the passage between different computers.

  So I created a project on another computer, in which I put the video files that are located on my hard drive (external). I saved the project on the same hard disk. Realization of my project, I noticed that creates the first "preview files" in a separate card.

  I got a new computer in which I put the 2 GB of ram necessary for myself so I could work at home. BUT when I connected my HD on my computer and tried to open the project, the computer said one of the preview files were missing. No big surprise, so I'm going and find the file. Click on it, but then it says:

  "not supported format or corrupted file", which is absolutely B * llshit because the Prime Minister created the file itself?

  In addition, all media, I imported in the left part of the screen of the user (not sure what you call) IS 'off CONNECTION '. It gets weird, because when I try to find the media using FIND in first, not all the files SHOW UP?

  Im getting quite nervous, because I need it to work hard enough

  Maybe its helpful to mention that my new computer is a complete novice blown [no internet connection, does not sound again: I just installed Service Pack 2] and maybe I'm missing some drivers?

  Please, please help me I'm wasting enough it actually...

  Thank you

  Jef

  Jef,

  Open the CS4. Create a new project and when you get the sequence settings screen, are selectable AVCHD, HDV, and XDCAM presets?

  If this isn't the case, you are using the trial version, or your full version has been restored to the status of the trial. The trial does not support anything MPEG, even when encapsulated in AVI format.

  If you have the full version which is returned to the status of first instance, follow these steps:

  1. disable

  2 uninstall

  3. run the Script own CS4

  4 reboot

  5. Repeat steps 3 and 4

  6. Repeat steps 3 and 4

  7 install

  8 activate

  9. turn to update to 4.2.1

• Unable to access Mac files when running in Windows.

  Applied Bootcamp, running El Capitan and Windows on MacBook Pro 9.2 10.  Fine.  This is all OK.   But...

  I want to access my files of Notes from the Mac side.   I can get to the Notes.app in the Applications folder when running in Windows.  I understand that I can read Mac files in Windows.

  I can't get to the actual Notes files indicated in the content of the Note.app folder in the Mac partition.  (Running in Windows 10.)

  Can someone help me with this please?

  Missing Manual instructions ok, so far, but are not real files to open.  ???

  Thank you, Mark

  Windows cannot write to the readers of Mac format.

• Lightroom 5.7.1 supports d7200 Nikon raw files

  Lightroom 5.7.1 supports d7200 Nikon raw files

  N ° you must be at least Lightroom 6.0. Or, you can use the free DNG Converter.

• Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged.

  Several files have been created and they are on my desk. When I try and open the files I have Adobe Reader could not open 'hs_err_pid14036.log' because it is not a type of file supported or because the file has been damaged. What can I do?

  It seems to me that your system file associations are out of step and must be properly configured.

  First, you will need to know what to use to open these files. Then you can Google how to set the file associations for any operating system you have and go and put them in the correct application.

  As to why they are generated, not sure, but not something from Adobe.

• Hi, I'm working on a Prezi and insert files .swf animation complex. Prezi no longer support this type of file. Does anyone know of a work around?

  Hi, I'm working on a Prezi and insert files .swf animation complex. Prezi no longer support this type of file. Does anyone know of a work around?

  You should probably post to a forum of prezi or ask the prezi support.

• Does Photoshop elements 13 support d610 nikon raw files?

  Does Photoshop elements 13 support d610 Nikon raw files?

  Hi lhanswer,

  Yes, Nikon D610 is supported in PSE 13

  Camera Raw plugin | Supported devices

  http://kb2.Adobe.com/CPS/408/kb408941.html

  Kind regards
  Sandeep

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Cannot open InDesign Mac files on pc

  I am trying to open certain InDesign files made on a mac on my pc, but it does not work.

  I have the latest version of InDesign on my PC.

  We tried:

  Open mac files as they are.

  Resave the mac as the former format of indesign files, then open them on PC

  Export from mac to IDML files and open these files on the pc.

  Open the file on my pc as a "copy".

  Nothing works.

  I get the message:

  Either the file does not exist, you may not, or the file may be in use by another application.

  With a deadline for this project very soon so really need to solve this problem. Any ideas out there?

  I don't know what's the mac version of original for this. And it will take some time to find out.

  I see this somewhere? It would make a difference?

  Use this: http://forums.adobe.com/thread/934429

  Yes, it makes a difference. First of all, my script checks if it is indeed an InDesign file. If this is the case, it indicates which version of the file has been created with (and recent versions of the script also usefully tell you this as that means for you, that is, whether or not you can open it with your version of inDesign).

  Also check out: nothing strange in the name of the file? Don't assume - Remove the name of the original file and type in something reasonable. There are a lot of strange symbols of Mac that can have hooked a ride along.

  If this does not work: either send the file somewhere for us to watch (preferred), or open it in a hex editor and show us the first two bytes. To allow us to check what it is.

• No support for CM1415 Mac scan

  I have a Color LaserJet Pro CM1415fnw MFP (product CE862A) that worked very well until very recently, but analysis not now.  It prints very well now, as always, without any problem.

  I have an iMac using OS 10.6.8 with a Wi - Fi connection.  Because I can print it, it doesn't seem to be a wireless problem.

  A few days ago the system downloaded an HP upgrade any (I wasn't paying attention).  I don't know if it's related, but now I can't scan.

  When I click SCAN or select it from the file menu, a box pops up saying 'opening session scan... ". "and disappears after a few seconds.  Sometimes a diagnosis appears: "Unable to log on to the device."

  The System Profiler from the printer says it is not scanning or fax support, no scanning application, but gives a UUID scanner (whatever it is).  The driver version is 10.4.

  Turning the computer and the printer did not help.

  Hi jweswig,

  If you have HP FF SW previously installed before moving to Mountain Lion I suggest to uninstall the HP software and then download and installed the new HP FF SW for your device in Mountain Lion.

  To uninstall HP software start the application to uninstall HP in the folder Applications/Hewlett-Packard. Then restart the Mac and empty the trash. I also recommend to repair disk permissions. Open disk utility in the Applications/Utilities folder. Choose the volume with an operating system installed and first aid tab, click on repair disk permissions.

  It is complete download and install the software from the following link: HP LaserJet Pro series complete Software Solution and pilot

  Make sure that the HP installation wizard can complete successfully.

• The difficulty to transfer pilot since Mac files to PC

  I'm having a problem transferring files from Mac to PC driver. I'll start by highlighting how I got on this problem.

  A little more than a week, I noticed that my computer (custom integrated PC, plug posted below) sleep disorders. So, I have looked into the problem and figured out after a few days, that the problem was my Realtek HD Audio Driver, which allowed me to talk through a microphone headset everything at stake. I figured this out by removing the driver of my computer; the computer went to sleep in itself very well after that.
  Unfortunately, in the process, I also deleted my driver network card ethernet as well. If I'm unable to connect my computer to the internet to download the drivers.
  I bought a USB flash drive and tried to transfer the files via a Macbook Pro, but it does not work. What should I do to properly transfer the files that I need a Macbook Pro on my PC?
  Type of computer Desktop PC/computer
  System manufacturer/model number Custom build
  OS  Windows 7 Edition Home Premium x 64
  CPU ASUS V P8Z77 - LK
  Motherboard Intel Z77 HDMI SATA 6 Gb/s USB 3.0 ATX Intel Mboard w / UEFI B
  Memory KIngston Hyperx 8 GB RAM
  Graphics card EVGA GTX 660

  Update your system Spec

  Hard drives M4 crucial ct128m4ssd2cca 2.5 "128 GB SATA III MLC int. SSD Samsung Spinpoint hard drive internal
  Antivirus Microsoft
  Browser Chrome

  First of all, when I open the file in the disk D:\ (my flash drive) I get this message: "this file has no program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel. »

  The file you tried to open when you got this message?

  You have not explained what you've downloaded or what to install application you tried to run.  The driver files for your motherboard of Asus P8Z77 V LK (no CPU) are here--> http://www.asus.com/Motherboards/P8Z77V_LK/#support

  For Windows 7 64-bit, there are 4 files related to the LAN.  I don't know which one of them could have downloaded and I don't know which one is the right one for your system.  Two of them seem to be simply different versions (V7.61.612.2012 and V7.52.203.2012).  Among these, I would choose 7.61.  The other two seem to be different versions of a Realtek Ethernet Utility, but it is not clear what it is if, in fact, that's what they are.

  If I were you, I'd do the following:

  1. Use the DVD media supplied with your motherboard.  May not have the latest drivers, but it should have all the necessary and it has the advantage of using an advanced graphical interface and also automatically detects your installed hardware.  See page 4-1 on your card User Guide mother.
  2. If you do not have the DVD media, ask Asus which driver you use.  Give them the serial number and the model number of your motherboard.
  3. If you can not get anywhere with options 1 or 2, download the following files in the category LAN http://www.asus.com/Motherboards/P8Z77V_LK/#supportVersion 5.796 & 7.61 (19.2 MB) and Version 2.0.2.1 (9.17 MB)
  4. Extract the files from the big zip file (right-click > extract all)
  5. I grant you that Asus has made things very non-intuitive.  I assume that you have opened the folder named "Realtek_LAN_V5796_V761_XPWin7\Realtek_LAN_V5796_V761_XPWin7\LAN" and clicked on "AsusSetup.exe" - since that doesn't seem to work for you, open the folder following down: WIN7, where you will find another copy of "AsusSetup.exe" as well as a file named setup.exe simply.  Try the first one and then the other.
  6. If still no joy, you return to #2 Asus will have to help.

• BlackBerry Smartphones get photo off Blackberry for Mac files

  How can I transfer files from photo of my Blackberry Pearl memory to the memory card?  Settings changed without my noticing it and unfortunately the files stored in the device.  I don't have a messaging service and wonder if there are methods to get the pictures.  I have a Mac with Leopard and it does not appear there is a way to use the search function to get to anything on the Blackberry. And Pocketsynch do not synchronize all multimedia files.

  You need to go to your media icon,... .once here, press your menu button and select Explorer.  You will see and option to explore the device memory or Media Card.  Go to the memory of the device and navigate to your pictures folder.  Once you select a photo, press the Menu key, then select move.  Then you get and the option to switch to the media (file photo) card.

  You can also use your Media Manager which is a feat that is provided by the Office Manager.  This will allow you to move between the device and the memory card support pix multiple files at once...

  I hope that helped!

• Download Raw on MAC files

  Impossible to download or find access to the plugin to allow download of raw files.  Adobe has no value for me without this feature.  Where is the download for my MAC?

  The Nikon D7100 was first supported in camera Raw 7.4 which is compatible with the CS6 and later versions.

  http://helpx.Adobe.com/Creative-Suite/KB/camera-raw-plug-supported-cameras.html

  In Photoshop, click Help > updates to update Camera Raw.

  Once updated, check the installed version of Camera Raw: Photoshop > Plug-ins > Camera Raw. It should report version 8.3.

  If this is not the case, download Camera Raw http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh 8.3 and install it manually.