1142N radio configs to support older clients

Similar Questions

• Best free tool for rezising of partition which should support the client as a server operating system.

  Does anyone know about a free tool for other than DiskPart Disk Partition resizing? It should support the clients and servers OS.

  Hello JawadQazi,

  There are many free tools for the Partition of drive on the internet. Please search an internet. Some tools have free trials and others have a load for the tool. You will need to do research on who will provide a tool best suited to your needs.

  Thank you

  Marilyn

• Windows 7 x 64 support for Client VPN with SBL/PLAP

  Is it now or will it be a customer VPN Windows 7 x 64 support prior to logon Access Provider (PLAP) that replaces start them before logon (SBL)?  I understand that connect any client supports it, but the customer needs customer VPN (IPSec) rather than any connection (SSL) because of their current license on the SAA.  They have little license for SSL.

  It is possible with AnyConnect, however, there is currently no functionality SBL/PLAP for the traditional IPSec VPN on Windows 7 client. There is an improvement for this feature request, but it has not been applied and so I can't give you an idea on whether she will ever be supported, see CSCse47544.

  -heather

• An example of how Adobe treats older clients of long date...

  I've owned all versions of Photoshop since Photoshop 2. I need currently CS3 reinstalled on an old system to run a custom plugin that only works with the CS3 version. I own both CS3, CS3 Extended purchased online through Adobe and my account shows both the products and orders with soap operas.

  As CS3 is end of line, I used my archive installation to reinstall, but kept getting a red arrow at the end series fields at the entrance of my series. And no, I did a typo in no more. Then I contacted chat and was told that does not support Adobe CS3... I know that... I don't need support, I need my product activated. After finally getting to a supervisor, he said (with a bunch of useless nonsense because it was obvious that he never read the previous discussion of the other person):

  Atul: I apologize for the inconvenience. But I need this degrades to the next level to solve this problem. They contact you with the perfect resolution within 48-72 hours of work.

  T: M 3 days to fix a simple keycode... so exactly how is it supposed to take place... you even my details.

  Atul: M T contact you by registered e-mail address.

  M t: ok, so 3 days to take now in charge of adobe will contact me and I'll be able to use CS3?

  Atul: Yes

  If it was on May 25 and yesterday I went on chat where I went through another lengthy session on where yet another supervisor said he could email me the process that I had to use CS3. I get an email today but I was told that CS3 has been exceeded. But get this, he told me I was able to activate CS2 and gave me a link. I called the support Adobe, went thru the menu system that has no option for what I had, got a kid that reproduces the same drivel CS3 and I asked to speak to a supervisor of support that could handle my problem after carefully explaining as well as giving my file number. She me spent the long and after that listen to the same old drivel the supervisor finally told that he could not help me anyway as I need the customer service not tech support. So I asked him kindly pass me on the good people as I had already spent more than 5 hours on this. He passed me along and once more I went through more than canned food drive asking me the same info I have already handed over to others and has been in my two cats and once more I asked a supervisor. This controller then began through the canned drivel and I stopped him and told him to send me. She said I should use the support for my problem as the customer service could not help. Do I need to go further with the bunch of useless garbage that Adobe rat hole call support? What do you think people?

  This person then wanted to make a screen sharing, but as I am a developer of the plugin under NDA with my company that does not happen. However, as a photographer for 35 years, developer of the PS and PS plugin Professor, I simply asked what he needed to do on a screen sharing. I explained that I had tried to install it on Mac 2 and 3 systems of windows with various operating systems, and whenever I entered my series I want to get the exact same on all 4 systems... the red X.

  Needless to say, that I tried to stifle Adobe, not the people for their support, because they can only dish of what they can, but the management without value that makes this a completely unnecessary method of dealing with his client.

  Enough rant, she came down to my chest and so you all know what a bunch of nonsense they can process. I know it isn't an activation server for end of line products, but Adobe can activate manually.

  MT

  MT review your account more closely, I see that you have two Photoshop CS3 serial numbers that come from a special event of the T4 in 2008.  In addition, I found that you have a serial number valid upgrade for Photoshop CS3 on Windows which ends in 6504.

  Since you have a upgrade serial number, you will be asked to enter the serial number of eligible products during the installation process.  If you need to download a new copy of Photoshop CS3 installation files, they are available to Download Adobe Creative Suite 3 products...

  I also found that you had 2 serial number Photoshop CS5 beta registered under your account.  In the future I recommend you make purchases of Adobe software from Adobe directly.  This will ensure that the license that was purchased is the license you've been waiting for.

• VMware View 4.5 supported Thin Clients

  Does anyone know if VMware maintains a list of clients from different vendors that support view 4.5? If this isn't the case, I would be happy to hear what you use thin clients.

  Thank you!

  There was once a pdf version, but it is now part of the HCL

  http://www.VMware.com/support/pubs/view_pubs.html

• JDeveloper 11.1.2.1.0 cannot change the config of the subversion client

  I would like to change the configuration of subversion client to activate auto-les accessories but cannot find an option to do this in JDeveloper. Tools-> Preferences...-> Versioning-> Subversion-> General does appear to have an option to change the settings of the server. Anyone know how I can change the configuration of subversion by JDev client?

  What I'm saying is that SVNKit (the Java library that JDeveloper uses his abilities SVN) does not require a config file, but I don't think (you should test) that it would use an if it existed.

  John

• Class Config XML support.

  Hello
  
  I have a system that takes care of your tank of properties a class that reads an xml file. For example sysconfig.xml years that contains all the properties of the system. Now I need to load the properties xml to another class, for example a class that read files from another application, and I need to store the password, login, path, etc...
  
  What is the best approach for creating a generic class that receives a string that represents the xml and load?
  
  Is too ugly receives a string with the name of xml to load?
  
  Thanks for the suggestions...

  If the method does not know the name of the file that is supposed to load, then passing the file name as a parameter seems to be a perfectly ordinary thing to do. What was really your question?

• Toshiba will support the Vista drivers for laptops or older?

  Does anyone have information on the support for older laptops that can run vista, like Tecra M2. Vista runs very smooth, it's very bad that there is no available for this model toshiba software.

  Hello Scop

  I'm also older non-Vista capable notebook. Vista works well, but without specific stuff from Toshiba. I'm not 100% sure but I put t think Toshiba will support older models. I'm also sure that no manufacturer specifications support units without Vista capable sticker.

• Restrict the vWorkspace client connector version

  Hi guys,.

  are there opportunities for the version of the client for users? For example, I want all users are able to connect via vworkspace connector 7.6.xx and when they try to connect with another version, they should get an error message and a hint of an update. Is this possible?

  BR,

  Christian

  Option 1 is the only website.

  Option 2 works

  Option 3 will work if you set your complete Client to get through the SSl gateway (this option is under Actions |) Manage connections | Firewall/Proxy Traversal. Enable RDP over SSL/TLS)

  If that is not set or not (for example, it is an internal user) people will not hit the SSL gateway so they have everything straight through.

  You can configure AppPortal via a Config.xml file and choose "Hide settings" for this would force them out the door. However, if you suddenly start to send all your internal users through the gateway, you will find that the overal experience is slower, so option 2 is the best.

  If option 2 is used correctly, they get all the Apps at all.

  As an idea, you can assign a single application to all older clients that has the name «please update your connector vWorkspace»

• Effects of the performance of 802. 11B clients on customers 802.11 g

  Can someone tell me what effect in what concerns the speed a 802. 11 customer b would have on a customer 802.11 g. Especially on a network using AIR-LAP1242AG-E-K9 access points.

  I've read elsewhere that when you use the older client 11 b AP will be degregate performance for 11g clients. Is this always the case for the AIR-LAP1242AG-E-K9?

  Does anyone have a stat for this?

  Dylan

  Hi Dylan,.

  Yes, customers of 'B' will be stil have a significant effect to take a look at this clip.

  When 802. 11B clients are * associated with an access point 802.11 g, the access point will start a protection mechanism call Request to Send/Clear to send (RTS/CTS). Originally a mechanism to address the "hidden node problem" (a condition where two clients can maintain a connection to an access point, but due to the distance can not hear the other), RTS/CTS adds a degree of determinism to the other network to multiple access. When RTS/CTS is invoked, the clients must first request access in the middle of the access point with an RTS message. Until the access point replies to the client with a message from the CTS, the client will refrain from access to the average and transmitting its data packets. When received by customers requiring abstain to access the average, other that the one who sent the original RTS, CTS control is interpreted as a command "do not send". You can see that this mechanism will prevent 802. 11 customers to transmit simultaneously with a 802.11 client b g, which avoids collisions this drop in flow due to attempts. You can see that this additional RTS/CTS process adds a significant amount of protocol overhead, which also translates into a reduction in network throughput.

  In addition to the RTS/CTS, the 802.11 g standard adds another important condition to enable 802. 11B compatibility. Where a collision occurs due to simultaneous transmissions (the probability that is greatly reduced due to the RTS/CTS), client devices 'reverse' the network for a random period before attempting to access the average again.

  Note that the increase in throughput for 802.11 g running in mixed mode is relatively modest compared with the 802. "11b and is a fraction of the flow provided by 802.11 g, when he supported not customers not inherited.

  It is well described in this great doc;

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_white_paper09186a00801d61a3.shtml

  I hope this helps a bit!

  Rob

• vSphere Client 5 U1 unable to connect to the host of U1 ESXi 4.1

  Hello

  I'm having a small problem.

  I am currently using vSphere Client 5 U1 (5.0.0 Build 623373) to connect directly to ESXi hosts (still no vCenter).

  I can connect successfully to 5.0 U1 hosts, but I have a few hosts U1 4.1 inherited in the lab which I just can't connect with.

  A little research in the compatibility tables show that with the most recent client, I should be able to connect do former ESXi hosts.

  However, when I try to connect to this host U1 4.1, I get a popup to update with the message "customer support required files must be extracted from the 'vsphereclient.vmware.com' server and installed". And then I get a prompt to install/save a Setup program.

  What is this new installer? Another version of the Client? Have I not the newest one? Anyway, I can't complete the download for this new installer (connection failure).

  The host of ESXi 4.1 is on the network and I can connect with an older Client (4.1) that is installed in a different workstation.

  What happens here?

  Thanks in advance!

  You must install as vSphere client major versions (3, 4, 5) but VMware tries to make this process as transparent as possible. That's why it asks to install it automatically.

  Once installed, just launch v5 and it automatically and transparently pass the correct version if you connect to a 4.x server.

• disable the plugins or the value 'never activate' on multiple clients

  I'm having a problem with the Java Deployment toolkit plugin, it continues to cause errors on my computers on network. I can set it to "never activate" on a single target, however, I need to push this setting to all computers on our field. I am open to any options, command line, script, gpo, copying a file from config to all customers, pretty much anything someone things will work. Any help that someone can provide would be most appreciated.

  Thank you

  machenba wrote:

  copying a config file to all clients
  

  Here's a quick guide. For more details about locking preferences, see the following article.

  • http://KB.mozillazine.org/Locking_preferences

  In the <>\defaults\pref\local-settings.js installation folder

  pref("general.config.obscure_value", 0);
  pref("general.config.filename", "mozilla.cfg");
  

  In the <>\mozilla.cfg installation folder

  //
  lockPref("plugin.state.npdeployjava", 0);
  

• LabVIEW - Arduino TCP/IP, connecting multiple Clients

  Hello

  I'm working on a connection TCP/IP between an Arduino shield WIFI control with several sensors and a LabVIEW program. You use a router, I set up a wireless network without internet that allows me to transmit the readings from the sensor of the MCU and send commands to control LabVIEW program. Currently, the Arduino is the server with the program LabVIEW connects to it as a customer and I would like the opportunity to add other clients such as a smartphone application at the same time. I am not able to connect several clients for my server Arduino based and wonder if and how this would be possible if the server was created on my computer using LabVIEW instead.

  I searched for help on the Arduino forums (http://forum.arduino.cc/index.php?topic=268578) and comments ranged from "Arduino can support multiple clients" to "Arduino can support multiple clients but it is full of errors. While it would be easier to achieve my goals by having the server on the MCU, as much data would be sent directly to each poll, the client I plan to switch to a server on computer using LabVIEW. My question is whether it would be possible to have multiple clients access to my new server, and if so, how it would be difficult to relay data from the sensor? The old plant requires the same data string for each client connected to my server. The new configuration appears as it would take the server to treat customers differently; Send commands to the MCU customer and data of the sensor of the MCU customer to everyone. Another layer of complexity is that I would need to relay controls of other clients in the same way, as the phone app smart sends a stop test command, to the Arduino via the LabVIEW program.

  Would be very grateful of entry to the community.

  Best,

  Yusif Nurizade

  You can create a server in LabVIEW that accepts connections from several clients. There are examples of different approaches to this in examples of shipment of LabVIEW and on this forum. As for the challenge of sorting where to send the data and how to transmit orders, it is-there is nothing that would make whether easier or harder in LabVIEW that in any other environment.

• Pre-fill devices supported when submitting to the App World?

  Hello

  My application is compatible with all the devices of BBOS5 +, but whenever I release an update that I need to re - check all the device options supported on the supplier portal.  Is it possible to include this information in the bundle?  What will happen if I chose 0 devices?

  In addition, can users on devices that are running an operating system not supported (older) view/download my application if I chose a minimum requirement of OS?

  Thank you

  Paul

  thepaolo wrote:

  (1) is it possible to include this information in the bundle?

  (2) what would happen if I chose 0 devices?

  (3) in addition, can users on devices that are running an operating system not supported (older) view/download my application if I chose a minimum requirement of OS?

  (1) not at all, unfortunately

  (2) you must select at least 1 device. In general, if you select a device, only users with this device will see your app.

  (3) n ° using App World your application based on OS minimum and selected devices.

  Example: you select minimum OS5.0 supported and all devices - only users with devices OS5.0 will see your app

• Jabber client - encryption of VCS Expressway with MRA

  Hi all

  I'm working on the implementation of MRA for a video solution existing. Version CUCM is 9.1.2 (no IM & P server), vcs - c and vcs-e 8.2.2.  Client Jabber is 11.5.x

  I finished most of the introduction and I am able to call internally and externally through MRA.

  I still have a few things to tweak.  One is the encryption of video calling once jabber connects from outside.  From my understanding, the thigh jabber call end point and VCS Expressway uses TLS. But when I run wireshark on the PC with Jabber client, I don't see the RTP stream as being encrypted.

  CUCM my jabber device does not use a secure profile.  Is it ok or not?

  Please let me know if more are needed.  Thank you

  You can confirm the call is encrypted from the client of jabber MRA by doing as follows (I used 11.5 jabber client, if you are using an older client, I can't guarantee this method):

  1. make a call from the client jabber ARM, once the call is configured and media is established, you can end the call.
  2. create a jabber client problem report (help > report a problem...)
  3. Enter the required details and save the .zip file.
  4 extract the file "jabber.log" from the .zip file. Since this file (at least since the version of client jabber 11.5) has the SIP messaging included in this document, you can use TranslatorX to view the file (you can also use a text editor if you wish).
  5 generate a diagram of the log file.

  translatorx - 01.png

  

  6. in the diagram of the scale, you should be able to locate the origin of the call. Search for an invitation, in my case a "RE-INVITE" and select it. A pop-up window will appear with the details of the SIP message.

  translatorx - 02.png

  

  7. read the content of the message prompt of the SIP protocol (focusing on the SDP - the component of negotiating media). I won't go into detail about how to read SIP messages (there's a good article here, it is not for jabber specifically, but the same concepts apply).

  translatorx - 03.png

  

  8. close the prompt message and open the message 'OK w/SDP' to examine the response of the VCS-E. The SDP response, we can confirm that the encryption settings have been accepted for the media (media will be encrypted).

  translatorx - 04.png

  

  For re - apply point Jamie, unless you run CUCM in mixed mode and using security profiles, signalling/media encryption stops on the thigh of CUCM/endpoint and the VCS - C respectively. See the diagram below for reference (mixed mode not implemented).

  MRA-media - flow.png

  

  You need not applied to the device of CSF security profiles to obtain the encryption between the client of jabber MRA and the VCS-E. If you can decode signaling and media packets in Wireshark your jabber client, you probably will not connect via ARM (ARM is always encrypted).

  Please let us know if that helps.

  -Jon