1173 program internal error

I use Ultiboard 10.0.1. At the start of the automatic router, I get the following message: error while the Autorouter of preprocessing. Source: Autorouter internal program error 1173 what that means? Thank you, Gary

Hello

Thanks for the info. I did research more far and it seems that this error might be a flaw that has been fixed in version 10.1. If you continue to get the error, could you please send us your design for testing file? Send us an e-mail to [email protected].

Thank you

Tags: NI Software

Similar Questions

  • Almost every time that I do a right-click to display a menu to do something such as delete or copy, the following error message appears: program internal error:.\Src\IntegrationToolsHolder.cpp,21

    Original title: internal program Errror

    I use XP Professional 32-bit.

    Almost every time that I do a right-click to display a menu of something for example delete or copy, you receive the following error message.

    Program internal error:.\Src\IntegrationToolsHolder.cpp,21
    If I click OK on the error message, it goes & I can then right click New & the appropriate menu appears and works correctly.
    Any ideas, please, as to what is the cause?
    Kind regards

    I told you I want to talk to you soon as you try these things.

    How to boot in Safe Mode and Clean worked for you?  Not at all useful?

    You said about this 2 weeks ago?

    Yet once, I fell in this place and the time and effort wasted because MS Answers forums invite to no system information when a new question is asked - but I digress.

    Update of security 908513 is included in Service Pack 3 update.

    Since forums MS Answers asks you any information from system when a new question is asked, we don't even know what Service Pack you have.  If you have SP3, you already have the update.  Two weeks and we don't know what is your Service Pack, what is your antivirus/antimalware environment...  We know that you have XP Pro 32-bit however.

    What you're likely to have is an extension of the Explorer Shell with a malfunction, and you can usually understand as follows:

    When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song).

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

    If you can really achieve almost everytime you do a right-click and choose something like delete or copy, you're well on your way to understand.

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

    You can also Google the name of a suspect add-on and see if there is any success about the errors with the extension and to what other people have done on it... Maybe just to get an update of the program that adds the suspicious extension.

    You can Google something like:

    Explorer XP crashing

    (you must complete your suspect on behalf of add on)

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the extensions one at a time non-Microsoft keep a list so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Disabling the extension does not uninstall the extension - it is just disabled.

    Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

    You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

    The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but I can when you toggle extensions, the extension is immediately turned off, to disable an extension does not require a restart, but if you find the problem, I reboot and retest in all cases to be sure that the problem has disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  • Internal Error 2908 {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} during the installation of a program

    Hi all

    I need help please. I get 3 errors when you try to install a program and I will include all of the below 3. Please help me get rid of this headache. Thank you.

    This is the first...

    Internal Error 2908. {837EE547-6D3B-7124-817B-A0DDC38CDA99}

    When I select OK I then get this one

    Internal Error 2908. {182C2188-3F15-CE6C-1FC2-23A0CB4637D1}

    If I hit OK once again I get a different error...

    Error 1935. "An error occurred during the installation of assembly ' vdFramedControl, Version ="6.1.60117.0", Culture ="nuetral", PublicKeyToken ="54EAC14E23C9EE53", ProcessorArchitecture = x 86." Please see Help and support for more information. HRESULT: 0X8002802F.

    It drives me crazy and I don't know what to do. Thanks in advance for any help that you could provide.

    Hi KelMil,

    1 Windows operating system you are using?

    2. what software are you trying to install?

    Method 1:

    You can consult the following thread link and try the steps Diana D December 1, 2010 and check if it helps.

    Error 1935.An error occurred during the installation of assembly ' Microsoft.VC80.ATL,.

    Method 2:

    You can also try to give permission for the two above mentioned registry keys. Check for multiple entries, registry keys, and give permission to all keys.

    a. click Start, type regedit in the search box and press on ENTER.

    b. click on edit and select find and type the copy and paste the registry key: {837EE547-6D3B-7124-817B-A0DDC38CDA99} and click Next.

    c. right-click on the key component and select permission.

    d. click Add, type everyone and click ok.

    e. Select group or the user name one by one and check the complete control of the area for all.

    f. click apply, click Ok.

    g. check for multiple entries for the key. If one is present, then repeat the steps above to give perimmision to all keys.

    Note: You must give permission to the {182C2188-3F15-CE6C-1FC2-23A0CB4637D1} key by following the steps mentioned above.

    h. restart the computer and check.

    Important: The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information about how to back up and restore the registry, follow the steps from the link below:

    Back up the registry

  • I have the seams to get an error message after instilling my saying of the Lightroom program: an internal error has occurred. :/

    I have the seams to get an error message after instilling my saying of the Lightroom program: an internal error has occurred. :/

    Hi alexish,

    Greetings!

    This problem occurs only when Lightroom can't access the folder Adobe due to lack of permissions for the folder you want.

    Please see this thread an internal error occurred: failed assertion!

    See Solution 5 in the link:- changing error modules

    Let us know if this helps

    Kind regards

    ~Assani

  • Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

    Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

    Hi woodysk

    Greetings.

    • You will need to read and write permissions on the Adobe folders manually.

    Please follow the steps below:

    • Right-click on the icon in the Finder and select the 'Go - To' folder option.
    • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
      • ~/Library
    • Then go to the Application Support > Adobe.
    • Right-click on the Adobe folder, then select the GetInfo.
    • Expand the section sharing & permissions.
    • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
    • Please click on '+' symbol, it will open the list of user accounts.
    • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
    • Click the gear icon and select apply to closed. Close the dialog box for information.
    • Then launch Lightroom application and check.

    Let me know if still face you any issue.

    Concerning

    Rohit

  • prevention installation internal error 2503/2502 programs

    I'm trying to install steam, but I keep frustrated by installation of braking internal error 2503/2502 boring. Please can someone help me before I completely lost my mind?

    Go to your control panel and click on folder options.
    Select the view tab and check Show hidden folders and files

    Navigate to c:\windows

    Right-click on the installation folder and select Properties

    Click the Security tab.

    Make sure that the Everyone group has read & execute, list the contents of the folder and read the value to enable.
    The system group has all selected to allow except for special permissions
    The Administrators group has all selected to allow except for special permissions

  • Graphics card has encountered an internal error during games

    can someone help me! ??? Im not sure what caused it but a week ago, when you try to play a game that has always worked well, a note appeared saying the graphics card had "encountered an internal error" and close the program. I'm not sure why this is, but I'm not sure how to fix this problem either!

    Please someone shed some light or offer a way to fix it? I tried to watch graphics settings, but I'm really lost!

    Many thanks in advance,
    Emily

    Hello

    Check your device for the graphics card Manager. Check if there is no yellow exclamation point.
    Further, you can visit the Toshiba driver page and there you will find the graphics card driver for your device.

  • An internal error occurred during the processing of this Mathscript

    I tried to run a ".m" file it starts with a number of % "commented" statements to help the program implemented. "  I get this error as above as "internal error in row 0, then the error message. Please notify it is a problem using % or else where in the program?

    Chuck

    Hello Chuck,

    This error indicates there is something in your script that LabVIEW MathScript did not understand.  As such, it depends on the script that you typed.  Is it possible to attach your script?  If this isn't the case, you can try a binary search with your script.  Remove half of your script.  If the problem persists, the culprit is in the half top.  Remove half of the upper part of the half and reaffirm.  If this isn't the case, it is at the bottom half.  Add in half of the text you removed and try again.  After you have identified where the problem occurs, you can try to simply the script by removing other lines that are not necessary to run the problem line.  If then you can put what you have, I can investigate on what is wrong.

    It is possible that comes to mind if you perform a replacement of indexation of the following form:
    [(m, n) vs s] =
    In other words, one of the values of multiple return putting inside another matrix.  A solution for this is to do the following:
    [s] = so.
    vs (m, n) = a;

    Grant M.
    Staff software engineer | LabVIEW Math & Signal Processing | National Instruments

  • Error 244: The DataFinder cannot start due to an internal error.

    I have LabVIEW 2010 and, during Windows startup, this error message appears:

    "The DataFinder cannot start due to an internal error.

    (244): Please wait until the National Instruments PSP Service is running and try to start the DataFinder or restart your computer. »

    I got this pop error during the past year it's a recurring thing. He began to show a few months after installing the LabVIEW program on my computer, so I'm not sure on what caused this message still appears. I find that it causes also a delay in the start of my computer - my other startup applications starting to show only when I close the error window. Help, please! Thank you.

    Hi xcontradictorx,

    Looks like National Instruments PSP server locator cannot be started. Could go you to the control panel > administrator tools > Services and locate the server National Instruments PSP Locator? Double-click it and make sure that the service is started. If this is the case, stop and start again (just by pressing the stop and start buttons). If this is not the case, run it, and then go in the Recovery tab and choose restart the Service as long as the action of first, second and more about chess.

    If after changing the settings for the PSP the issue to continue service I think that for some reason any PSP service will just be started late for some reason any. Could you do a quick real test: disable the DataFinder in msconfig, reboot, then run the C:\Program NIUninstaller Instruments\Shared\DataFinderDesktop\bin DataFinder.exe. This should place the MyDataFinder app in your taskbar (that looks like a yellow gear).

    If this is successful, then we will have to change the order of startup services such as the DataFinder begins just after the service of the PSP.

    Try the following:

    (1) locate the DataFinder entry from the registry. Located at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
    (2) remove the entry DataFinder
    (3) add a shortcut to DataFinder.exe in C:\Documents and Settings\All Users\Menu Menu\Programs\Startup
    (4) restart

    This should make all the standard Windows startup (as from services, etc.) and then launch the DataFinder.

    One question: do you use the DataFinder at all? Either with DIAdem or database search tool? If this isn't the case, you can try to remove it from the startup items. Simply go to start > run... and type "msconfig". Click the Startup tab, look for DataFinder and deselect. Click on apply. That will probably get rid of the error message.

  • MX 922 scanner error - my garden of Image - an internal error has occurred. Out of this software.

    When scanning, a screen will appear with My Canon Image garden and I still get this error message - an internal error has occurred. Out of this software.  The scanner analyze the element and saves the file in My Documents, but it would be nice if the garden Image worked like it is supposed to.  I had a MX922 for a few years, but it has stopped working.  I bought a new printer 922 and it does the same thing.  I have Windows 7 Home Premium.  Any ideas?

    Hello.

    To resolve this problem, try uninstalling drivers MP, IJ Network Tool and the program of my kindergarten picture from your computer.  Once this has been done, please visit the following link to download the program of MP Drivers and my garden picture update of our Web site.

    MX920 series drivers & software

    It has not responded to your question or problem? Find more help contact us.

  • Error message on iMac "an internal error has occurred. Easy-Photo Print EX will be terminated. Difficulty?

    Tried simply to print a photo from iPhoto to my Canon MG8120B. Error message on iMac "an internal error has occurred. Easy-Photo Print EX will be terminated.  Please help me to solve this problem; most frustrating!

    Hi USASMYTHES,

    Reinstall the program Easy-PhotoPrint for iPhone on your Mac can solve the problem that you are experiencing.  Please click here to access the drivers and software page for the PIXMA MG8120B.  Once the initial download to your model page, follow these steps:

    1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

    2. then, click the red arrow next to the 'SOFTWARE' section and click on the EASY-PHOTOPRINT EX. file When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

    Once you have downloaded the file, please double-click it to reinstall it on your Mac, and then try again to print the as ot. If you are still experiencing difficulties, please call or write to us at one of the methods on the page contact us for further assistance.

  • An internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 of error in windows 7 Home premium 64-bit OS.

    I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

    I use a laptop Dell Inspiron N5010, with Win 7 home premium 64-bit OS, recently turning on my laptop with the with the power button, by chance I pressed it twice and I got the error message that the PC was not shut down properly and will resume windows again. After the PC recovered and resumed, I started having the error: "an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. No.502 error"while starting. as I have yahoo Messenger at startup. Even if I start some programs after turning on my PC, even if I have nothing else on my Boot., I get this message first, I click on ok, then its fine... I want to just get rid of this error message. Help, please. What should I uninstall n re - install all the applications for which I get this error. or do a system restore?

    You have posted in forum Windows XP hardware and drivers.  You should have posted in forum Windows 7, probably the forumprograms .

    If you post here, remember to include the name of the application that could not be loaded. Is Yahoo Messenger? Something else ("all applications for which I get this error")?

    Your question is also confusing: you get this error message every time that you do a reboot?

    You can use msconfigor Autoruns (look at the 'Connection' tab) to temporarily disable programs that start automatically when you log in to isolate the application that is causing the problem.

  • Windows ip configuration is an internal error: the request is not supported

    I cleaned up a few viruses out of a Windows XP Professional computer to a customer, and now he can't go on the internet.  When I check ipconfig, I get the following error.

    Windows IP configuration
    An internal error has occurred: the request is not supported.
    Contact Microsoft technical support for more help.
    additional information: host name of request impossible.
    So I googled some results. Have replaced the TCPIP.sys file with one from another computer, I still get the same message.  I don't have a windows XP original disk to put it into recovery mode.
    I also ran the command "netsh int ip resetlog.txt" but which did not help either.  I saw on another blog.
    The NIC is to see that there is a power cable plugged into it as well.  Help, please!
    Thank you
    Trever

    Hello Trever,

    Follow the methods and check:

    Method 1: You can refer the following Microsoft Knowledge Base article and check.

    "Error 1068" error message when you try to enable Internet connection sharing

    http://support.Microsoft.com/kb/827328

    Method 2: Try the SFC (System File Checker) scan on the computer.

    To run the System File Checker tool, follow these steps:

    a. click Start and click run, then type cmd in the box start the search.

    b. right click on cmd in the list programs, and then click run as administrator.

    c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

    d. at the command prompt, the following line and press ENTER:

    sfc/scannow

    For more information, see the article:

     

    Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

    http://support.Microsoft.com/kb/310747

     

    File system (CFS) Checker

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Let us know if that helps.

  • How to solve the internal error 2753

    How to solve the internal error 2753

    This error relates to a problem installing Windows.
    When you try to install or update anything when the message appeared?

    If so, one thing you can try is this:
    -Click on start, select run... and type CMD into the DOS command prompt
    -Type regsvr32 vbscript.dll in command prompt and press ENTER.
    -You should see a message saying that DllRegisterServer in vbscript.dll successful, click OK

    Now you can try to reinstall the program/application/update.

    If not, can you give us some info on what you were doing when the error occurred?

  • 0 x 0070643 error Code: General internal error. MSI could not install the AVG product

    Original title: I have Advanced System Care and TuneUp Utilities with CleanMyPC Registry cleaner installed and I still have problems...

    I have three different cleaning programs and although they clean my system there is still lack of components and my computer of movements still so slow. It takes about 40 seconds for a page to come. Some programs will not delete because of missing components. I downloaded with YouTube downloader of Skype, and I can't delete them... I try to remove AVG so that I can reinstall it and I get a message saying error Severty: Error Code 0 x 0070643 General Internal Error. MSI could not install AVG product. I lost my Instillation of Windows XP disc so I can't reinstall it to fix driver problems, what can I do?

    Hi KevinWomble,

    Here's a post addressing a similar issue. See the advice given and check if it helps you.

    When you try to install AVG in Windows, receive the error code 0 x 0070643

    Also, I recommend you keep a confidence rather than having cleaning utility several installed a that could come into conflict with each other and cause problems with the computer.

Maybe you are looking for

  • Web pages of blocking (CSA length on UO fault on page 58)

    When I'm on a page of a site, the page hangs and it appears at the bottom of the page on the left, either "asc length 158 on words" or "error on page". What do I do? Thank you

  • Installed the "system tool update" but still have the same problem.

    Greetings, These 3 updates (KB971029;  KB973540; KB982525) continually fail. Error details: Code 800 b 0100 I have installed "The tool of the system update" & while he plans once the updates will never happen. And when a manual update is done Windows

  • Loss of power during the Installation of Windows Vista, need help

    Recently reformatted my laptop, a loss of power during installation and now when I turn it on I get the same message telling me that the computer stopped unexpectedly during the Windows Installation, press OK to restart your system. (Not a quote).  W

  • return the video hardware problem

    Flip software is loaded on my PC (Windows Vista Home Basic) works fine... when I go to physically plug the camera into the USB port and the error msg comes on telling me that it considers that the camera is not connected to the computer... any help?

  • battery not charging on dell inspiron

    My dell inspiron is only 7 months old and I already have the hard drive replaced. I had this done about 3 weeks and since then the battery won't recharge. It will be on the charging of opportunity but now it is down to 5% of its power and does not lo