12.2 installation fails on Oracle Linux 7

Similar Questions

• the prerequisite check fails on oracle linux 6-> oracle 11.2

  Hi guys,.

  I try to install oracle on oracle linux 11.2 6

  I get via oracle-rdbms-server-11gR2-preinstall-verify yum and no warnings are triggered.

  If I try to download all packages via yum manually asked as a prereq, yum response that everything is kept up-to-date to the latest version (with the exception of pdksh, present in the repository more...).

  When I run the Setup, the prerequisite check fails!

  Here the Setup log. I post only for libaio but is not the only one (glibc, odbc, pdksh)

  INFO: INFO: package: libaio - 0.3.105: it is a precondition to check if the package "libaio - 0.3.105" is available on the system.

  INFO: INFO: gravity: IGNORABLE

  INFO: INFO: OverallStatus:VERIFICATION_FAILED

  INFO: INFO: -----------------------------------------------

  INFO: INFO: results of the verification of node: oraLinux

  INFO: INFO: expected value: libaio - 0.3.105 (i386)

  INFO: INFO: real value: missing

  INFO: INFO: Error Message: PRVF-7532: package "libaio - 0.3.105 (i386)" is missing in the node 'oraLinux '.

  INFO: INFO: Cause: a required package is not installed or if the package is a kernel module, is not loaded on the specified node.

  INFO: INFO: Action: make sure that the perl package is installed and available.

  INFO: INFO: -----------------------------------------------

  INFO: INFO: *********************************************

  INFO: INFO: package: libaio - 0.3.105: it is a precondition to check if the package "libaio - 0.3.105" is available on the system.

  INFO: INFO: gravity: IGNORABLE

  INFO: INFO: OverallStatus: SUCCESS

  INFO: INFO: -----------------------------------------------

  INFO: INFO: results of the verification of node: oraLinux

  INFO: INFO: expected value: libaio - 0.3.105 (x86_64)

  INFO: INFO: real value: libaio - 0.3.107 - 10.el6 (x86_64)

  My packages are too recent?

  If I ignore the errors the installation completed successfully went well. But I wonder if the above errors could be the oracle server is not stable.

  Could someone help?

  Thank you very much

  Andrea

  What exact version of 11 GR 2? Only 11.2.0.3 is currently certified with Linux 6.x - if you use 11.2.0.1 or 11.2.0.2, you should not use Linux 5.x

  HTH
  Srini

• R12 Quick Installation on Suse Linux or Oracle Linux fails

  Hello

  I tried several combinations of operating systems to try and install correctly using the Oracle R12 / quick installation but I could not. My last attempt was on Suse Linux 10. When the installation wizard is complete, database checks are successful but HTTP server is unresponsive and all subsequent checks fail.

  The reading of google and the various threads on this forum, I found that for Oracle Linux, we must apply the patch that contains libdb.so.2. Since then, I do not have an account to support oracle, I cannot get this fix and based on rules, no body can send it in an email, which means that we can not install this distribution on Oracle Linux without having to pay for the supported. Since then, it is a learning exercise without the use of serious production of R12 apps, we do not have any arrangement with Oracle support.

  For Suse, I also have the same problem, but when I try to start the opmn manually using opmnctl beginning, she responds with message, began. But when I use opmn stopall, the computer stops responding. Now, I don't know yet how to start debugging this problem.

  I would give just to try to install it or there at - it a hope?

  Thank you.

  Hello

  I finally managed to install R12 on Suse Linux Enterprise 10 SP3. I decided to start again after a repair for the past two days. Here's the process:

  a. install Suse Enterprise 10 SP3 with office and all development packages offered in the facility.

  b. click the computer--> install the software--> search for the 'db1 '. It will give you two or more packages. Install db1_185xx (from Berkley). This provides a required libdb.so.2.

  c. then go through the installation as outlined in the instructions using rapidwiz.

  It fills correctly and I can see the login screen now.

  Now, I need to know how to put in place to automatically start all services after startup.

  Thank you for your help.

  Kind regards

  Sohail naima.

• The Oracle Linux 5.10 ADR 11.1.1.6.0 installation problem

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to create the web page application online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and PeopleSoft Campus Solution 9.0 R5

  I just finished installing Oracle ADR (Application Development Runtime) 11.1.1.6.0 with Weblogic 10.3.6.0 in Oracle Linux 5.10 Server machine. In step 3 of 8 required checks, impossible to pass the 2 items below:

  (1) verification of recommended operating system Packages (no pass)

  (2) verification of the parameters of the kernel (no pass)

  Oracle Linux 5 is certified with ADR and prerequisite verification certificate of operating system is spent, so, I keep the installation to the end successfully.

  My question is:

  2 items not moved will not affect the development of applications or performance later? If so, how to fix?

  Thanks in advance.

  (1) the parameters are necessary, but the system is running with a lower number. Right in the middle of the execution of your application, enter you the maximum and your system stops. It is best to set the values for the given numbers. When you run the Setup program and go to the test page and the test fails, you should be able to click the test below and the installation should continue. If the continue button is not active, you must correct the error.

  (2) I don't have an oel5 system. Missed, you have not all if necessary values in your limits.conf file? The syntax for the Scriptures is essential. Look at the other lives in the files. How do they look like?

  I guess you need to add a space after the * who would set the setting for all users, or set you it only for user oracle, which is the one you normally install the software with. Check out the tutorial I posted the link with my last post. You may need to add the line /etc/pam.d/login and etc/pam.d/sshd.

  Timo

• Cluster verification utility Oracle failed with the INS-20802 then install 12.1.0.2 on Oracle Linux 7.1 x 64

  Hello!

  You want to install Oracle Clusterware 12.1.0.2 on Oracle linux 7.1 x 64. When installing, everything was fine, except the last step - utility of Cluster Oracle verification failed with the INS 20802.

  In the log file, I found:

  INFO: From audits to clock using Network Time Protocol (NTP) synchronization...

  INFO: NTP configuration file "/ etc/ntp.conf ' verification of the past existence

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs1.

  INFO: PRVF-7590: 'ntpd' is not running on the node "pdc-sap-ascs0.

  INFO: GLWB-1024: the demon NTP or Service didn't work on one of the nodes in the cluster.

  INFO: PRVF-5415: check to see if the NTP daemon or service runs failed

  NEWS: Control of synchronization using network time Protocol (NTP) failed

  INFO: PRVF-9652: Cluster Time Synchronization Services check failed

  also in xml file like:

  < ELEMENT > Network Time Protocol (NTP) < / ITEM >

  < DESC > this task checks the synchronization schedule cluster on clusters that use the Protocol NTP (Network Time). < / DESC >

  < MORE_DETAILS > < / MORE_DETAILS >

  < SUCC_NODES > < / SUCC_NODES >

  < FAILED_NODES >

  < NODE ID = 'pdc-sap-ascs1' > < / NŒUD >

  < NODE ID = 'pdc-sap-ascs0' > < / NŒUD >

  < / FAILED_NODES >

  < GLOBAL_ERROR_DESC_LIST >

  < ERROR_DESC >

  < MSG_TXT > PRVF-5507: NTP daemon or service is not running on any node, but the NTP configuration file exists on the following nodes:

  PDC-sap-ascs1, pdc-sap-ascs0< / MSG_TXT >

  < CASE > the configuration file has been found at a node if no NTP daemon or service was running. < / CAUSE >

  < ACTION > if you plan to use CTSS for time synchronization, then NTP configuration must be uninstalled on all nodes of the cluster. < / ACTION >

  < / ERROR_DESC >

  But of all the nodes ntpd is running:

  [root @pdc-sap-ascs0 ~] # ps ax | grep ntpd

  2214 s + 0 pts/0:00 grep - color = auto ntpd

  19438?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  [root @pdc-sap-ascs1 ~] # ps ax | grep ntpd

  11492 pts/0 s + 0:00 grep - color = auto ntpd

  19090?        SS 0:05 / usr/sbin/ntpd u ntp:ntp g - x

  So, why postinstall auditor has not found of ntpd running?

  This situation was prior to installation, I started, but this time I ignored the warning.

  Thank you very much for your answers!

  The problem is that in both servers, I want to use ntp, and I wrote in the configuration on both servers,

  Server ntp.myorg.local iburst

  but we use two IPs for ntp, both resolved through dns servers, so in my case the first server got a single for the ntp server ip address and then got another ip. It was a problem and check postinstall determine that the servers use different time sources and do not like this situation.

  Once I changed ntpd config to use ips, check postinstall succeeded.

• I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  I got an error grid Infrastructure installation Oracle 11 GR 2 (11.2.0.4) for a stand-alone server on Oracle Linux 7

  It's my environment:

  VM VirtualBox

  OS: Linux to Oracle 7

  RAM: 2G

  CPU: 1 outlet | 2 carrots

  OS packages for the needs of the DB: all except pdksh. (installed in ksh). Jut ignored.

  Oracle software version: 11 GR 2 (11.2.0.4) Oracle grid Infrastructure

  Installation type: SServer tandalone.

  The installation user: uid = 501 (oracle)

  installation groups: gid = 501 (oinstall) groups: oinstall, dba, oper, asmadmin, asmdba, asmoper.

  Put ASM implementation with Linux e/s Standard (No. ASMLib).

  
  

  The virtual machine has 3 disks attached.

  
  

  Features: / dev/sdb, / dev/sdc, / dev/sdd

  
  

  I ran to related records:

  
  

  # / bin / / dev/raw/raw1 gross/dev/sdb1

  # / bin / / dev/raw/raw2 gross/dev/sdc1

  # / bin / / dev/raw/raw3 gross/dev/sdd1

  
  

  # raw - qa

  / dev/RAW/raw1: linked main 8, minor 17

  / dev/RAW/raw2: linked main 8, minor 33

  / dev/RAW/raw3: linked main 8, minor 49

  
  

  Also, I have configured the following command to set permanent configuration:

  #vi /etc/udev/rules.d/99-vmware-scsi-udev.rules99-vmware-scsi-udev.rules

  ACTION == "add", KERNEL == "sdb1", RUN += "/ bin/raw/dev/raw/raw1 %N".

  ACTION == "add", KERNEL == "sdc1", RUN += "/ bin/raw/dev/raw/raw2 %N".

  ACTION == "add", KERNEL == "sdd1", RUN += "/ bin/raw/dev/raw/raw3 %N".

  # set permissions on these discs for the owner of the Oracle user.

  ACTION == "add" KERNEL == "" raw * ', OWNER is 'oracle', GROUP is 'oinstall' MODE is "0660" "

  
  

  NOTE: when I run # ls - lrt/dev/sd *, I - I don't know if the disks has permissions icies because they are on the way to access/dev/raw/raw *.

  
  

  BRW - rw-. 1 root disk 8, 16, 19 August 01:54 / dev/sdb

  BRW - rw-. 1 root disk 8, 17, 19 Aug 01:54 / dev/sdb1

  BRW - rw-. 1 root disk 8, 32 19 August to 01:54 / dev/sdc

  BRW - rw-. 1 root disk 8, 13, 19 Aug 01:54 / dev/sdc1

  BRW - rw-. 1 root disk 8, 48-19 August to 01:54 / dev/sdd

  BRW - rw-. 1 root disk 8, 49-19 August to 01:54 / dev/sdd1

  
  

  This happens whenever I restart the server.

  
  

  But authorities are good when I run # ls - lrt/dev/raw/raw *.

  
  

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/rawctl

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw1

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw2

  CRW - rw-. 1 oracle oinstall 162, 0 19 Aug 01:54 / dev/raw/raw3

  
  

  Problem: when running script $GRID_HOME/root.sh.

  Adding Clusterware entries to inittab

  ohasd could not start

  Cannot start the Clusterware. Last 20 lines of the trace log alert:

  2015 08-19 02:15:24.442:

  [client (7260)] CRS-2101: the RSC has been formatted using version 3.

  2015 08-19 02:15:28.238:

  [client (7283)] CRS-1001: the OCR has been formatted using version 3.

  ohasd could not start /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl 337 line, line < ALERTLOG > 4

  failed execution of /u01/app/oracle/product/11g/grid_1/crs/install/roothas.pl of the/u01/app/oracle/product / 11 g/grid_1/src/install

  Please help me.

  Geraldo Peralta

  Using RAW could be the problem. I'm not sure someone who has used Virtual Box with raw disks for their RAC testbed. Most people use ASM. I've seen a few people use NFS as well. You'll also want to stay away raw because that which is frowned upon in 11.2. See http://docs.oracle.com/cd/E11882_01/install.112/e41962/whatsnew.htm#RILIN931

  Under the Options deprecated for Oracle RAC 11 g Release 2:

  "Installation of files on raw devices is no longer an option available during installation. You must use a shared file system, or using Oracle Automatic Storage Management. »

  Here's how to configure RAC on my laptop with Virtual Box: http://www.peasland.net/2015/04/23/oracle-rac-on-my-laptop-with-virtual-box/

  HTH,
  Brian

• Oracle DB 11 g 2 controls prerequisites failed - Oracle Linux 6.5

  Hi all

  Once again stuck with questions during the installation of 11 GR 2 DB.

  1. Swap size - failed
     Details:
     Size of swap - it is a prerequisite to check if sufficient total swap space is available on the system.
     Expected value: 7.74 GB (8120228,0 KB)
     Real value: 7.7 GB (8077308,0 KB)
     
     My checks:
     # SH - 4.1 swapon s
     Size of the characters in filename used priority
     / dev/DM-1 partition 8077308 0-1
     SH - 4.1 # cat/proc/swaps
     Size of the characters in filename used priority
     / dev/DM-1 partition 8077308 0-1
     SH - 4.1 # cat/etc/fstab. grep swap
     / dev/map/vg_vssdbserver-lv_swap swap swap defaults 0 0
     
     I thought that 8 GB of swap space was enough, my system has 8gbRAM.

  As a general rule, swap space is usually configured to twice the RAM if you use 8 GB or less and equal to the amount of RAM if you have 16 GB or more. If you have 64 GB of RAM, however, it is useless to have 64 GB of swap space, because the loss of performance so you never need to swap space will be very bad.

  However, you probably want to configure your Oracle database to use the kernel Hugepages using EAMA instead of the AMM for optimal performance and efficient use of memory. Hugepages kernel, unlike the POSIX memory shared (/ dev/shm) used by the AMM will be pre-allocate memory to start the system upward and can not use swap space. Don't forget that the swap space is not a substitute for the lack of physical memory (RAM).

  On the Oracle database installation, there should be a button to ignore warnings or errors and continue the installation or if you feel more comfortable with it, to meet this control, simply create a temporary swap file to increase your swap space, which later can be removed when you no longer need. It is certainly much easier than to the resize your swap partition.

  For example:

  [root@vm213 ~] # lsb_release d

  Description: Oracle Linux Server version 6.5

  [root@vm213 ~] # swapon s

  Size of the characters in filename used priority

  / dev/DM-1 partition 2097148 0-1

  Create a pagefile of 1 GB in / Home

  [root@vm213 ~] # dd if = \u003d/dev/zero of / home/swapfile bs = 1024 count = 1048576

  1048576 + 0 records in

  1048576 + 0 records out

  1073741824 bytes (1.1 GB) copied, 4.32366 s, 248 MB/s

  [root@vm213 ~] # chmod 600/home/swapfile

  [root@vm213 ~] # ls-l/home/swapfile

  -rw-------. 1 root root 1073741824 28 May 03:07 / home/swapfile

  [root@vm213 ~] # home/mkswap/swapfile

  mkswap: / home/swapfile: caution: do not erase the sectors bootbits

  all over the disk. Use f to force.

  Implementation of version 1 of swapspace, size = 1048572 KiB

  no label, UUID = d26f4d5f-af46-4567-b836-0d5d0b1661cb

  [root@vm213 ~] # home/swapon/swapfile

  [root@vm213 ~] # swapon - a

  [root@vm213 ~] # swapon s

  Size of the characters in filename used priority

  / dev/DM-1 partition 2097148 0-1

  / home/file swapfile 1048572 0-2

  If you want to enable the pagefile at system startup:

  [root@vm213 ~] # cp/etc/fstab /etc/fstab.backup_'date + %N '

  [root@vm213 ~] # echo "/ home/swap file, swap swap defaults 0 0' > / etc/fstab"

• DB 12 c on the Oracle Linux 7.1 installation problem

  Hello

  I have installation problems of database 12 c on Oracle Linux 7.1, this is what I did and what is the result:

  Steps done in order:

  1. Configure a machine virtual box OL7.1 (has enough swap space, is fully updated and invited additions running)
  2. Install the package "oracle-RDBMS-server-12cR1-preinstall" to make sure that I have all the packages required pre
  3. Followed the additional configuration steps in this tutorial oracle-www.m-base.org/Sounds.html (permissive-selinux, exports .bash_profile, create the installation path, create users and groups required)-> https://oracle-base.com/articles/12c/oracle-db-12cr1-installation-on-oracle-linux-7#additional_setup
  4. Obtained by runInstaller installation and chose to install database software ONLY.
  5. Run the root.sh as root script, after that the installation was successful
  6. DBCA: Create database, mode, advanced, general use create as CBD (an APB called pdb1), EM express (Yes), rather than default storage settings, install the schema example, character set AL32UTF8, by default all the rest.
  7. Edit the/etc/oratab file by changing the N a y at the end of the last line that is now "data1:/u01/app/oracle/product/12.1.0.2/db_1:Y".
  8. sqlplus sys/oracle as a sysdba

  I'm stuck at 8, it's the following message is displayed:

  ERROR:

  ORA-01034: ORACLE not available

  ORA-27101: shared memory realm does not exist

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3640

  Additional information: 1543399787

  Process ID: 0

  Session IDs: serial number 0: 0

  I studied him that changing the/etc/file hosts to remove all the duplicate names could fix this error, then here is this that my/etc/hosts looks like:

  cat/etc/hosts

  127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  : 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Before I change anything, I would like to help, can someone go get where I left and gives me a step to ensure that this facility is set up correctly?

  I missed something?

  Comments are welcome!

  Your 7 step refers to an instance called data1, but you set your ORSCLE_SID to the cdb1. THERY can't be correct.

• Oracle Failsafe Installation Fail - lack of Windows Management Framework 4.0

  Hello

  I try to install Oracle Failsafe 4.1 with 12 c database Oracle and Windows 2008 R2.

  When the installer checks dependencies, stops and displays the message

  Oracle Fail Safe Manager requires Microsoft Windows Management Framework 4.0.

  Refer to the Installation Guide Security fail to Oracle for more information.

  But I have already installed the management framework, I already rebooted the server.

  Do you have any idea?

  Thank you.

  4.11 patch solved the problem

• Prerequisites on Oracle Linux 6.3 packages are missing for the installation of Oracle database 11 g 2.

  I want to install Oracle database 11 g 2 on Oracle Linux 6.3, but some packages are missing (.) RPM files).

  Please tell me how to install the missing packages (.) RPM files)?

  Some of the missing packages are:

  liabio-devel - 0.3.105

  unixODBC - 2.2.11

  unixODBC-devel - 2.2.11

  and a little more.

  Let me note that there is an Oracle Linux forum where you can get answers more quickly. (I'm linking this thread it mentioning what I guess)

  Also I would suggest using the yum package manager and there is aoracle-rdbms-server-11gR2-preinstall package available which install all prereq packages...

  See more here: How I Simplified Installation of Oracle Database on Oracle Linux

• Installation of Oracle 11.2 g ASM on Oracle Linux 6.5

  I need to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system.

  1 - What is the difference between 11.2 billion to Oracle and Oracle 11.2 g ASM?

  2 - I installed Oracle 11.2 g on Oracle Linux in the past, install Oracle ASM different?

  3 can provide me with instructions on how to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system?

  Any advice would be appreciated.

  Thank you.

  1 - What is the difference between 11.2 billion to Oracle and Oracle 11.2 g ASM?

  ASM is for managing the storage for the database.  Otherwise, you would create the database on the file systems.  ASM is installed as part of an installation of the Network Infrastructure (even for non-grouped, no CARS, a single node environment)

  2 - I installed Oracle 11.2 g on Oracle Linux in the past, install Oracle ASM different?

  You should make the installation of the DSO and the config as part of the installation of the grid Infrastructure.

  3 can provide me with instructions on how to install Oracle 11.2 g ASM on Oracle Linux 6.5 of the system?

  On Linux 5, no 6.   See the documentation for the Installation at http://docs.oracle.com/cd/E11882_01/nav/portal_11.htm

  Hemant K Collette

• Installation of Oracle RAC with Oracle Linux 5.8(64bit) and 11 GR 2 on EXSI 5.5

  Well, I'm trying to install oralce RAC on oracle Linux 5.8(64bit) with 11 GR 2.

  After installation oracle Linux package required by it I m is problem for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm.

  I triyed with rpm - Uvh oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and the result is rpmlib (FileDigests) and (PayloadisXz) rpmlib need for oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm

  I triyed with yum localinstall oracleasmlib - 2.0.4 - 1.el6.x86_64.rpm and get an error of public key for 2.0.4 - oracleasmlib - 1.el6.x86_64.rpm is not installed...

  I tried on 3 machines and same result.

  With 32-bit I m not getting any problem

  Found the solution

  the inadequacy of the kernel version and oracle asm

• EMP 11.1.2.3 System Installer fails to install the Oracle DB, 32-bit and 64-bit Client

  Hello

  We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.

  Its a standard deployment with a Foundation Server and an Essbase server.

  When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.

  The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.

  The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.

  The Diagnostics show the below error message:

  NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties

  INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall

  INFO: Oracle.install.customizedeinstall set to true

  INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE

  INFO: The value oracle.installer.LibPerms 0755

  INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs

  INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0

  INFO: oracle.installer.mandatorySetup set to true

  INFO: oracle.installer.useORACLE_BASE set to true

  INFO: Oracle.installer.removeallfiles set to true

  INFO: Oracle.installer.additionaltool_continue_onerror set to true

  INFO:

  Specify Home Details Page *.

  INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.

  INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.

  INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.

  GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: The attention of unregistered Manager, using the features of the Super class

  INFO: User selected: Yes/OK

  INFO: Closing OUISetupDriver.JobExecutorThread

  GRAVE: [FATAL] [INS-10008] Session initialization failed

  CAUSE: An unexpected error occurred during initialization of the session.

  ACTION: Contact Oracle Support Services or view logs

  SUMMARY:

  - .

  See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096

  INFO: Tips are ABORT

  GRAVE: Unconditional exit

  INFO: Add ExitStatus FAILURE to exit status set

  INFO: Find the status of output more suitable for the current application

  INFO: Exit status is - 1

  NEWS: Stop Oracle Client install

  I got my answer in the newspaper.

  The ORACLE_HOME_NAME is the question.

  Our deployment account has a hyphen -, and so the Yes program is unable to initialize.

• Installation Oracle Linux 6 - won't be after this screen

  

  When I install until this screen, it will not proceed... How to solve?

  Hi GheeSeongand welcome to the VMware communities!

  I guess that the scroll bar does not reveal any button 'Next' at the bottom of the screen...

  You've hit a bug in Oracle Linux 6.2.  We have an article in the Knowledge Base describing the related issues during installation Oracle Linux 6.2 on vSphere and another related issue when you use virtual EFI firmware.  All these problems are caused by the same bug Oracle Linux (and they have released an update to fix it), but it seems that we have not yet a section in Knowledge Base describing the problem encountered on VMware Workstation, where the symptom is that the screen is cut off and there is no button 'Next' to visible.  (Interestingly, you can still use the keyboard to go through Setup... Press Alt + N)

  To get the display work correctly, try this:

  • Shut down the virtual computer.
  • Go into the settings of the virtual machine and configure the virtual machine display to have a screen at 1024 x 768.  Save the settings.  (I have been informed that sometimes this setting doesn't "stick", then you will want to return to settings and check that it is correct before continuing.)
  • Turn on the virtual machine and enter the Setup program.  You should now have a button "next".
  • Install Oracle Linux 6.2.
  • Once the client is installed, follow the instructions in the Knowledge Base article to install the update within the guest to correct the cuase of the root of the problem.
  • When you have installed the update and turn off your virtual machine, you can remove the limitation of 1024 x 768 display that you added earlier.

  Your Oracle Linux VM should then work correctly.

  Please let us know if this solves the problem for you!

  Thank you

  --

  Darius

• Oracle OpenScript - WebDom Browser Helper Installation failed!

  Hello

  Try to install the new version of OpenScript (12.3.0.1.376) and I get an error message: WebDom Browser Helper Installation failed! Cannot save run multi-user for Chrome plugin setting in the registry under the key: "HKLM\software\MozillaPlugins\@oracle.com\npOpenscriptPlugin".

  Please can someone help with this problem.

  Proven thanks!

  Solved this problem with https://forums.oracle.com/thread/2340326 measures.

  Proven