12.5 mm thick hd in T410?

Anyone know if this is possible, in the Bay of main drive or with the adapter into the ultrabay slot? Thank you!

does not work

Tags: ThinkPad Notebooks

Similar Questions

  • Can you please tell me how to make the thicker arrows on the Pages.

    Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

    < re-titled by host >

    Try here > Pages for Mac: Add and edit forms

  • Thermal Pad thickness, brand and Type of GPU memory (surrounds the GPU chip) iMac late 2009?

    Hello. I'll be repair (and cleaning after 6 years) 2009 end iMac coz ' the screen has five 2cm thick, uniformly distributed, striped of vertical lines (it is still usable in Mode safe), which indicates a good chip GPU (used to pass all the tests of stress for the GPU and GPU memory) but a subcomponent that surrounds it has weld fracture joint coz' it may have overheated in the summer (which has a record high 36 to 42 degrees Celsius) and OS X might not revved up fans enough that may have contributed to cause solder joint breaking.

    When I open the iMac Monday, the thermal pads for memories of the GPU (surrounds the GPU chip I use a thermal paste with) may not be in good condition more. I was wondering how thick cushion is suitable for the GPU of the iMac (an ATI Radeon HD 4850 512 MB), what brand and what type (if the thickness is perhaps the most important)?

    Thank you. God bless you. Revelation 21:4

    I would like to contact https://www.ifixit.com/

    If anyone should know...

  • Firefox window has a border bottom thick when it should be thin or missing

    I have the latest version of Firefox, and for a while, the lower edge of the window was too thick. Here is a screenshot of the thickness of the border is:
    "< a href ="http://s232.photobucket.com/user/MarkDali/media/Work%20Portfolio/Firefoxborder.jpg.html"target ="_blank">< /a >"

    This screenshot is from when the window is not maximized. When it is, the border is thin, but not completely hidden as it should be. Y at - it all the parameters it would cause? I have several modules and extensions, but not sure if they would cause the extra width.

    Anyone have any suggestions on the best way to fix it? Thank you!

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • thick line through text page Ubuntu 12,04 14.0.1 FF

    Using Ubuntu 12.04, FireFox 14.0.1
    Displaying web pages there is a "thick line" by the text on the page. Unable to take a snapshot, the distortion disappears. This also happens if I reload the page. If I scroll up/down the distortion comes
    Precedent.

    I uninstalled FF, rebooted and reinstalled. The problem is still there.

    It seems that not every site displays the problem. Also, I've tried chrome and the problem is not
    there. to aid of chrome is not the answer for me, I would still rather use Firefox.
    I'm hoping to get some suggestions or a fix.

    Doesn't it seem related to scrolling? Here are some suggestions to deal with aberrations display:

    Could you try turning off some Firefox settings. I don't know if you have need of all these, but no one seems to solve the problem for everyone.

    You have to restart Firefox in order for these changes to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

    Edit > Preferences > advanced > General > "Navigation" section

    Uncheck the first 3 boxes:

    1. Use AutoScroll
    2. Use smooth scrolling
    3. Use hardware acceleration when available

    If you think OK and restart Firefox, the problem is solved?

  • Toshiba Satellite L500-12V - Thermopad thickness

    Hi, I want to replace the thermal paste and thermopad in my toshiba L500-12V. I don't know of thermal conductivity and thickness of thermopad. I can buy thermopad with 0,5 thickness mm, 1 mm or 2 mm. That one will be right? Thanks for help.

    Hi, I want to replace the thermal paste and thermopad in my toshiba L500-12V. I don't know of thermal conductivity and thickness of thermopad. I can buy 0,5 mm, 1 mm or 2 mm. That one will be right? Thanks for help.

  • HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

    I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

    @vjdetling

    Printer:

    Range of all-in-one printers, HP OfficeJet 3830

    Full software features:

    File name: OJ3830_72.exe

    The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

    Set your printing preferences / Print Preview to include

    • Media type 'Index Card letter'
    • Paper size: letter

    If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

    Help, suggestions and examples:

    Print Labels_Business-Cards_Cards

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click this post accept as Solution to help others find answers.

  • Satellite Pro A10 - 3mm thickness vertical line on screen

    I have a thick vertical line of 3mm on the screen seems to come up in colors, it generally moved to gray.

    The display was damaged - or is this some sort of driver problem.

    Hello

    It looks like a hardware malfunction. UPS may be a FL. But I m not 100% sure.
    What you can do? Well, if it's really a hardware fault so the only way is to contact Toshiba service. But it could also be a strange software problem. In this case, the best way is to recover the operating system and/or update the graphics driver. You can also check your BIOS version. If there is a newer version, then try to upgrade the version of the BIOS.
    But if the material is broken, then contact ASP.

  • Incoming Fax page, left thick black line down the side edge

    Hello

    I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

    Comment of thoughts,

    SyBerGuy

    Hello

    For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

    In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

    So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

    Sy

  • Qosmio F50 - thickness required thermal sheet

    Hi all

    I have Toshiba Qosmio F50-108. (9700M GTS)

    I intend to change the thermal paste on the CPU and VGA.
    In order to so I see that there are also thermal sheets on RAM chips.

    Does anyone know the thickness of the people?
    The sizes I can buy are 0.5 mm 1.0 mm 1.5 mm

    I can open it and measure but it will be the nuclear option :)

    Thank you very much

    Hello

    I think you mean the PAD VGA NB CATERON part number: K000064710
    There is also a CHOCK PAD part number CATERON DDR3 VGA: K000064720 available.
    I also found this part of thermal grease number 776: K000055600 is also used between the cooling module and chip.

  • Video (youtube and new sites show twice (in a split screen video high-low divided by a thick green bar. Sometimes, the sound is also messed up (screeching). In IE theyplay very well. I use Win XP Nvidea 8600 gts. Someone help with this?

    When veiwing videos on the new channels (bbc) or on youtube. Most of the time the video window is divided into two. A top of the window and the bottom window divided by a thick green bar, even in full screen.

    Sometimes, the sound is distorted (screeching). The problem does not exist in Internet Explorer and has been present since the download of Firefox. I love firefox, but would return to IE if this problem cannot be corrected.

    This is a feature of your graphics card, which was restored by the last flash update. Disabling hardware acceleration is a dirty fix that works; updating your drivers is would have been the selector and solve your problem, but I have not tried.

  • HP ENVY 5640: Several Questions in 1 post: Types of paper, paper thickness, length of paper

    What is the largest GSM that can fit inside the HP ENVY 5640?

    What is the variety of types of paper (such as brochures and flyers and business cards) that can fit inside the HP ENVY 5640?

    What are the maximum lengths of paper which can fit inside the HP ENVY 5640?

    All responses are GREATLY appreciated. Thank you!

    Brendan Conder
    Geeks of GC

    As far as I know, GSM is an acronym for "grams per square meter" and has exactly the same meaning as scientific notation more:

    They provide a measure of the density of the paper; in general, the higher the value, the thicker paper GSM.

    GSM values are used in the world; the major exception is America, which still uses the values of weight "books" (even though I believe that the significance of this measure differs slightly depending on the size of the paper "basic" which the eventual paper size has been cut).

  • Tecra A11 - possible disk HARD 12.7 mm thick?

    How can I check if a hard drive 1 TB 2.5 "12.7 mm thick will fit in my Tecra A11 without having to buy one to try?

    Good question. Call the nearest service Toshiba and ask? I mean who can offer more help with what Toshiba service.
    In any case, I'm sure you can use it.

    What you can do is to remove the HARD drive cover placed at the bottom. And check the installation of the HARD disk. Check the HARD drive carrier. As far as I know, 4 screws HARD drive are on the same place for two hard disks and these 3 mm should not be problematic.

  • IPad pro cable loading safely able to charge phone more than 6 s.  I noticed that it is thicker than the iPhone cable

    MY pro iPad charging cable is thicker than the iPhone cable loading.  It will damage phone if I used it to charge the phone

    the thickness of the cable have no impact on the load so not

  • Automatic startup on t410 problem

    We have recently implemented a citrix VDI in a server of the box and have created several virtual machines. The virtual machine is running without problems.

    To connect to the virtual machine, we use hp smart client type t410. These seem to work when "logon" is pressed manually on the citrix receiver well.

    Some clients are however, simply lie being "spectators". This means that there is no mouse or keyboard connected. So what I need is the client lightweight hp smart to connect to the virtual machine automatically.

    In the hp customer profile, there is an option 'autostart' under the root/ConnectionType/xen/connections / [ID] /. But when I set this option to 1, the client tries to start the virtual machine (he says that the virtual machine load), but shortly after, it seems that citrix receiver is blocked (I see the HP logo and citrix receiver is back on the login page).

    I tried a lot of combinations of registry settings, but none seems not to work. Also the autostart parameter accepts values from 0 to 5, but it says anywhere what is the difference between 1 and 5. Could I be on? Should I go home from another angle? Maybe it's a known bug in the hp receiver client or citrix?

    Any help is greatly appreciated.

    Apparently the problems were caused by the autoLaunchSingleApp parameter (although I'm not sure why).

    By using the following parameters does autoStart works correctly:

    autoLauncheSingleApp = 0

    autoStartDesktop = 1

    autoStart = 1

    Also set the domain and credentials are required.

    (all the above mentioned are under the root/ConnectionType/xen/connections / [ID] /)

Maybe you are looking for