120 LiDE Scanner doesn't scan

Similar Questions

• I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.

  I installed my Canon PIXMA MP600 with the latest drivers from the Canon Website, but the printer doesn't scan.  It prints very well I can't scan and save.

  I can't find the printer drivers specifically for Yosemite on the Canon website.  How can I get this analysis and save them?  I have never installed this printer on my iMac.

  Have you tried the Applications/Image Capture or VueScan?

  VueScan

  VueScan FAQ

• My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  My laserjet 3050 doesn't scan with Mac Lion system. When will the pilot be available?

  Thank you very much, it works, but all I had to do was remove the printer and run 10.5 installation. I was then able to scan through HP Director, without taking other measures.

  Best regards, David

• My problem is with the scanning. I can't use the charger of the scanner, it always scans go flat.

  My problem is with the scanning. I can't use the charger of the scanner, it always scans go flat.

  Also, when I scan several pages, just the first page is scanned.

  Adobe/Acrobat Reader cannot parse documents; What software do you use?

• 120 jealousy scanner

  Want all-in-one printer well under warranty (bought end of August 2014) 120.

  Problem: sudden lack of scanner.

  I got in touch with Scott of the Canada-USA on 17 November 2014, 22:08 (Italian time).

  He gave me all the instructions of thHP printing & scanning doctor (new driver, new firmware, ecc), obviously with the result draw: it is not possible to establish a link between the PC and my desire to 120.

  In any case, using the copy function, I can say that without doubt there is a hardware failure as I see that scan ioff light, while that the sensor detects the light.

  I hope I will get you the instructions for the substitution.

  Thank you.

  Andy1943

  P.S. The scan function seems quite a problem printer Envy: a previous Envy 100 (out of warranty) exhibted one fault simmetrical: light scan, sensor to scan out of use

  I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.

  If you are unfamiliar with the operation of the function of private messages of the Forum, this post has instructions.

• (Redirected) My scanner doesn't work the scanner

  I have a Brother MFC-J430W had worked flawlessly for a year, but recently it has stopped working as a scanner. If I try to run a scan of the device or my PC it gives me an error that there is no. "MFC-J430W is not found. If the device is OFF, turn on the device. Check the I / F cable connection between the device and your computer. If the scanner works with another application, cancel the scan or wait for the analytical work to complete, and then try again. CC4-202-00000008.  I worked with support brother and followed every step of troubleshooting with no luck.  They tell me now that I need to contact Dell because it's a registry problem now.  They tell me if I say I can not scan when I press the button scan Support of Dell, but I can scan from my pc through something like PaperPort that they should be able to help.  Unfortunately my office is off support and when this happens, that Dell doesn't let you email support more?

  Best of this post in the Forum of devices/printers, here:

  http://en.community.Dell.com/forums/3528.aspx

  Bev.

• N6350 Scanner will not scan button on the front panel

  I have configured the HP scanning software and added a shortcut. It will scan from the HP Scanner Software, but no analysis NOT of the scanner. The name of the user's the shortcut there. When I hit the button, is said "Please wait" and the Green LED flashes. But it does not scan.

  Solved. Do you have an another clean install and it worked...

• PSC 2350 doesn't scan

  I have a Dell with Windows 8.1 (64-bit).  When I press on the "Scan to" or the "Start SCAN" buttons, I get the message "you need to install or run HP software for this feature.  What software?  Where is he?

  On the HP Support site, I downloaded the 'HP printer install wizard for Windows' [8.1].  I ran the wizard.  Part of the process allows the scanner test.  The test was successful - he said that the software worked.  However, when I go to the PSC 2350 and try to scan, the mentioned error message previously always comes to the top.  So, what's the problem?

  Through some trial and error I discovered a solution - I can't always use scan on the psc 2350 buttons, but there is a solution:

  Procedure for scanning using an HP psc 2350 connected to a Dell Inspiron 660 with Windows 8.1

  1. Go to "Desktop" (in the window that contains 'Favorites', 'Homegroup', 'This PC' and 'Network')

  2. Double click on "Control Panel."

  3. Go to 'Hardware and Sound' and click 'view devices and printers. "

  4. Go to "Printers" and double click on "HP psc 2350 series.

  5. Double click on 'search for a document or an image.

  6. A window opens that allows you to specify the characteristics of scanning; After you choose the settings that you want, you can "Preview" of the object to scan or to do the 'Scan '.

  7. When the analysis is complete, a dialog window ("import pictures and videos") appears allowing you to specify the way in which the scanned object must be imported into a file in your computer.

  8. Select the option you want (or click the "More options" link to get a clearer idea of what options are / average) and click on "next".

  9. The scanned item appears in a window of 'imported photos and videos; "you can click on the displayed element and ' move to ' or copy to ' a file/folder desired.

     Well, it works, but it is not the simple solution that I would always have...

• my printer works but my scanner is not scanning and fax for windows cannot locate my scanner

  I have recently upgraded to windows 10.  now my scanner is not recognized when I try to scan.  I am able to print correctly.  I am connected to a Canon MF 5770 multi function machine

  Hello

  How about you contact Canon? they know which software is better provided

  You have installed the latest drivers Windows 10 below?

  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_mf5770#DriversAndSoftware

  I suggest you give it a try if you're having trouble Cannon would be the place to check with, not HP.

  Regars,

  Shlomi

• officejet6600: scanner stops mid scan and said troubleshooting user cancelled

  Scan stops mid scan and freezes. Troubleshooting program says "user cancelled" during the test, but I didn't touch system. All connections are fine. uninstalled and reinstalled the drivers. Printer restarted several times. Help!

  Hello @alanrpirvine!

  Thanks for posting on the HP Forums!

  I should be able to provide a few suggestions that may help solve the problem.  I suggest a copy of the picture running on the printer. It is a good way to ensure that the material is OK and the printer can scan the document and print it.

  To perform a copy click: How to copy photos

  Another thing, I suggest you is to ensure that the printer becomes full power.  It may seem silly, but when the printer performs a scan or copy, it pulls in a lot of power.  If your printer is connected to a surge protector of power that he cannot get the power it needs. I recommend the printer on the wall directly.  This may be a temporary connection but is a good way to make sure that the power is not a factor.

  You can try scanning from another program such as Microsoft paint to test the software.

  1. Open the start menu on your computer.
  2. Start typing 'Paint '.
  3. Your computer should start the search for 'paint '.
  4. Open Paint.
  5. Click the "files".
  6. Click on "from a scanner or camera.
  7. The image must go to paint.

  Let me know how it goes!

• scanner HP not scan to computer hp

  my hp 8600 printer/scanner pro desktop will not scan to my computer for MY SCANS.  Just like a picture.  In addition, when I try to do it from the screen of the printer, it is said that he can not find a computer to send it to.  Yet, I can get importing photos from the side of the computer.

  Your message was incorrectly displayed in the Feedback forum.  I moved it to the windows 'Hardware and drivers' forum where the printer/scanner issues are on the subject.  When the validation, always include your version of Windows.

  My advice is to check the forums to support HP (starting at http://support.hp.com/).  This is the best source of answers to your question.

• Scanner don't scan and also indicates the color cartridges not installed

  Original title - scanner not scan

  I replaced my ink cartridges were empty, so I had to fill them. I replaced the in my mp250. He always says that the color cartridge is not installed, it wont even scan. the cartridges must be new or can they be refilled and reinstalled. I even tried to modify and use black ink only in the settings and it does not work.

  Hello

  1. You did changes to the computer before the show?
  2. What is the brand and model of the scanner?
  3. What operating system you have installed in the computer?

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Please post back with details to help you an appropriate solution to the problem.

• DeskJet 2540: 2540 Deskjet doesn't scan - using Yosemite! 0.10

  Bought a printer from "all in one" 2540 yesterday - are unable to scan (Using Yosemite). Printing software uninstalled and reinstalled - no error just won't give any access to a facility to scan. Really angry against all printed HP suggestions and quite happy to return immediately and get a good printer/copier/scanner. Very, very angry that in 2015 stuff still just simply does not work, but they still sell. If there is a solution can someone tell me where it is printed?

  Hey there @Silvester1984!

  Thanks for posting on the HP Forums!

  I see that you are unable to scan.  I would be happy to provide you with some suggestions that may fix the problem.  The first thing I suggest is to test the Capture of IMage scanning.  Image capture is an application that is integrated into the Mac operating system that should allow you to scan.

  To open Image Capture, click the spot light (in the shape of magnifying glass on the right)

  Type 'Image Capture '.

  It should appear as the first option

  Open Image capture

  Once you open the Image Capture, select your scanner from the left column of the window.  The scanner will be probably under "shared".  Once the selected scanner you should have options for the scan on the right side.  If you do not see many options then click on "View details" at the bottom of the window.  Scan using the Image Capture test to see if there is communication between the Mac and the scanner.

  If please after back and let me know how it goes

• 3054 HP doesn't scan wireless

  Hello world! I have a HP 3054 which has always worked fine without thread before today... Currently, it allows to print wireless from my macbook pro very well without any problems, but it will not scan! To scan, I need to connect the USB to the computer. If I try to scan from the printer, he said: "Scan error. Try the Scan of the computer"and then if I try to open the scanner via system preferences print & scan, it keeps loading and never actually scans (the same thing happens when I try to scan via the HP scanning on my computer application). When I connect the USB, the only way I can get it to scan is through HP scanning. The scanner via the opening system preferences gives the same results when I try to make it wireless. Help, please!

  PS I have all the updates for the printer software and I am running OS X 10.9.1 Mavericks

  Hi camgirl.

  From what you described, it seems to me as a problem of communication with the driver.  I suggest to unplug the USB cable and reset the printing system. Once the system is reset, we can add the printer returned as a wireless printer.

  Follow the instructions below to Reset Printing System

  1. Click the Apple icon, and then click System preferences.

• scanner doesn't work now on an hp photosmart c7180 all in one solution Center will not come on i', running on vista

  My scanner used to work on my vista machine, now it does not work. When you try to open the center of solutions for my photosmart c7180 all in one i get an unrecognized message just after a momentary flash of the starting solution Center screen.

  Hello

  What is the complete error message you get?

  Follow the steps below and check if that helps.

  Method 1: Troubleshoot scanning.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems

  Method 2: I suggest you install drivers for HP photosmart c7180 all in one manually from the manufacturer's Web site.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=1153754&

  See also: messages of error & lights.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=2697&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1153754