1245dx D7 - reapply the thermal grease for CPU/GPU - GPU thermal pad

Similar Questions

• Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  My desktop running Win7 Home Premium m9200T computer crashes often.  It seems to be associated with temperature.

  I tried SpeedFan, but my computer crashed whenever I ran it.  The SpeedFan 20 window scroll a few lines of text that the computer crashed.  Y at - it a utility to monitor the speed, temperature and cpu/gpu for desektop m9200T fan?

  PC Wizzard works well on my computer.

  Thanks Big_dave.

• Pavilion dv7t 6100 - LM726AV: replacement of heat-sink/fan using the thermal pads and thermal paste/paste

  Hello

  The fan on my laptop died so I am trying to replace the fan and the heatsink unit. The manual that I use specifies that thermal grease should be used on the cpu and heat pads must be used on the graphics processor and the capacitors.

  The arrival of the new fan it came with heat pads on all relevant areas of the sink as a tube of thermal grease. When I removed the old fan, thermal pads have proved only on the capacitors and the components around the GPU and that thermal grease was used on the CPU and the GPU.

  My question is: how this part must be installed? Should I remove the fron pads thermal heat sink that covers the processor cpu and graphics and do not use the thermal grease in these areas? Or the thermal grease can be used here and let the thermal pads on the heat sink?

  Thanks for your help - thank you for the advice/opinions in this case.

  You can remove the protections and pass with the dough so but only f, you are sure that the metal on the core processor and graphic is in solid contact. And there, I meant it touches and also has a lower compression. For me, the thermal paste is superior coolant and should be used on really hot spots. However, if the metal is not full, solid contact you run the risk of overheating.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Question about the thermal pads

  Hello, I have a question, is what heat pad should I use heat pads HP service guide for my graphics chip, this is what it says and how do I use them

  "The thermal pads are used on the Northbridge contact (3) and chip Northbridge (4), chart/heat sink contact (5) and chip subsystem (6) graph and chart/heat sink contact (7) and capacitors (8).

  http://h10032.www1.HP.com/CTG/manual/c02666747.PDF

  The question is, what thermal pad use? Because I have a 0, 5mm thick, another of 1 mm and another 2 mm, and I don't know which one I need

  Look at the picture on page 96 of the Manual:

  Manual

  Each chip that needs a thermal buffer is a different size and shape. Are the keys that you have replacements or you reuse the original? They are different sizes and shapes, apart from the thickness? Otherwise, I would bolt the heater without heat is dedicated to the as a dry and watch the free space on each chip. It should be obvious which cooling pads on the heat sink are closest chips on the motherboard and organize them accordingly. The pads should be compressed a little when screw you the radiator.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Satellite U400: Where to find the latest driver for CPU Intel CORE 2 Duo

  I think I had the latest drivers for this process, but I did something and now the drivers are back to: 2004, please LOOK AT THE SCREENSHOT that I show here and tell me what is the name of these drivers I need to download & install? Ok thank you.

  Photo: [http://s5.tinypic.com/24n2n3m.jpg]

  Made a mistake and installed OLD VERSION on the NEW version of the driver and now, if someone can please help me to find the name and the driver for this Intel CORE TM 2duo driver? ... Because my laptop started to work much more now with this 2004 the old version and now it is extremely hot.
  Help?

  Hey Buddy

  These drivers are part of the windows operating system. It is a Microsoft driver and I doubt that you have a newer version installed I think you mixed with something!

  I can say with certainty that you will find not all CPU drivers and to be honest, I never heard special drivers
  You must only ensure that a right chipset driver has been installed all that s!

• How to get the latest fix for CPU

  Hi gurus,
  
  Hello.
  
  
  How to get the latest information from CPU fix for our system EBS 11i, how to get alerts whenever they have released patches of CPU.

  Hi DBA.

  Please check this, hope this helps.

  See the metaink notes:

  Releases of Oracle E-Business Suite 11i and 12 Critical Patch Update knowledge Document (October 2010) [ID 987438.1]

  Information OCT - 2010 CPU patches:

  http://www.Oracle.com/technetwork/topics/security/cpuoct2010-175626.html

  on the paths of the CPU:

  http://www.Oracle.com/technetwork/topics/security/alerts-086861.html

  For the email subscription:

  http://www.Oracle.com/technetwork/topics/security/securityemail-090378.html

  Published by: Amigo on December 22, 2010 07:26

  Published by: Amigo on December 22, 2010 07:29

• iMac restarts after 5 minutes of the heavy load of CPU/GPU and noisy fan

  Hello

  My iMac (late 2012 if I remember) restarts when under heavy load for a while.

  I work a lot with Final Cut Pro X.

  Whenever I have add clips in an event, Final Cut allows you to copy and then transcode and analyze the clips, and this task's CPU/GPU intensive (Final Cut Pro X uses OpenCL, where CPU/GPU). After a few seconds, the iMac fan begins to be really strong and seems to reach its maximum speed.

  Then, after a few minutes of this heavy burden, the iMac simply restarts, and the fan slows down and stop. After the reboot, everything is back to normal, with the exception of the warning illustrated by Mac OS X, who said that the closure was not planned.

  I'm sure that this behavior is not normal. I don't see why a computer should reboot/crash when under heavy load.

  Note: you can also, to transcode some clips or movies I used the excellent software called Handbrake, using CPU only encoder ffmpeg, and I don't remember having accidents even if the CPU has been loaded and FAN running loud too. So maybe it has something to do with GPU?

  How can I understand what is happening?

  Thank you very much.

  Thomas

  First try to reset the SMC reset management system (SCM) controller on your Mac - Apple Support

  If continuous reboot to run the Apple Hardware Test mode extended using Apple Hardware Test - Apple Support

• Joshua-H61-Μatx - update the necessary Bios for CPU Upgarde - Sandy to Ivy? (HP P6-2260EA)

  Hello, I have a mother board Μatx-H61-Joshua. (It's a P6 PC - 2260ea HP)

  You need a BIOS update.

  When it says that a CPU is supported in the motherboard specifications document, this means that the BIOS support is already present.

  

• Allocate multiple cores of the only host for CPU on a virtual machine

  Hello

  You don't know if it is possible, but could find is not online.

  An application on my virtual machine uses only a carrot and I want to accelerate.

  Add more cores on this virtual machine is meaningless, to that effect, I would like to allocate multiple cores of the host that will act as a single core on the virtual machine.

  Is this possible?

  Thank you

  Herman

  As already stated above, this is not possible, and you have two options:

  1 buy a new CPU with a clock higher;

  2. that your application works with multiple processors.

• Problem with the HP Envy 17 CPU/GPU?

  Hello, I bought this Hp Envy 17 in Hong Kong last summer, around July or August.

  http://h20386.www2.HP.com/HongKongStore/BundleDetail.aspx?pdetail=P322497&

  I mainly used for editing video and games. People frequently say oveheats, so that, I think. About 2 weeks ago I could still run my thin, especially Train Simulator 2014 Games, I use bandicam for the registration of sequences. I was able to get up to 120 fps, I lock to 30 fps when recording. A few days later if I could barely 30 when registering, and my overall fps dropped to 50. So I uninstalled the game and installed again, and Bandicam. Now I have even worse fps, I barely 27 at the no registration NO. I checked the forums and many people say that this computer is overheating, so I was wondering if it has something to do with overheating CPU or GPU or something. I don't really know what the problem is and I want to correct the situation as soon as possible.

  Thank you

  Tintin

  Hey Lee,

  Welcome to the HP Forums!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Thanks for your post, I will do my best to help.

  I understand that your laptop is overheating. Here is a link to help you with an overheating and Auto Shutdown problem troubleshooting.

  You can run diagnotics to test the hardware failure. Screening of hardware failures (Windows 8).

  If it is not resolved, the laptop is less 1 year then old, it is still in warranty. You can contact HP support for assistance. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. The HP Technical Support site map

• Thermal Pad thickness, brand and Type of GPU memory (surrounds the GPU chip) iMac late 2009?

  Hello. I'll be repair (and cleaning after 6 years) 2009 end iMac coz ' the screen has five 2cm thick, uniformly distributed, striped of vertical lines (it is still usable in Mode safe), which indicates a good chip GPU (used to pass all the tests of stress for the GPU and GPU memory) but a subcomponent that surrounds it has weld fracture joint coz' it may have overheated in the summer (which has a record high 36 to 42 degrees Celsius) and OS X might not revved up fans enough that may have contributed to cause solder joint breaking.

  When I open the iMac Monday, the thermal pads for memories of the GPU (surrounds the GPU chip I use a thermal paste with) may not be in good condition more. I was wondering how thick cushion is suitable for the GPU of the iMac (an ATI Radeon HD 4850 512 MB), what brand and what type (if the thickness is perhaps the most important)?

  Thank you. God bless you. Revelation 21:4

  I would like to contact https://www.ifixit.com/

  If anyone should know...

• CloneVM with the County of spefic CPU

  Hello guys!

  I use CloneVm to create a new virtual machine, but I want to specify the number of processors. I did a little research and realized I could use 'changeVMvCPU' to achieve this goal. However, I was wondering if it is not possible to define the processors rely directly on "CloneVM". , Someone knows?

  Thank you

  Roger

  Pouvez re - write your own operations of cloneVM, manually rebuild the process/action to add the proper context to change the material at the time of the clone... If you REALLY want. I've never bored because it was not worth the effort since the way in which I pointed out uses the existing workflows and actions that do not add time to the overall deployment time. The choice is yours, so, in short, the answer is YES, you should be able to do this in a single call, it's just a lot of effort to get the installer

  See the code inside the changeVMvCPU action to see how to set the necessary context for CPU. Other important actions to look at code:

  cloneVM - note the entry "spec".

  getCloneSpec

  getConfigSpec

• New thermal pads are needed?

  Hi, I have a HP Pavilion DV4T-1400, with a bad card system.

  I'm putting the new motherboard and I must of course reconnect the heat sync.

  I have a thermal paste for the proc/heatsync but there are a few thermal pads on the Northbridge Clip that are always connected.

  How is it important that I replace the thermal pads?

  I replaced the thermal paste anyway.

  Thanks for your help, I apologize for my n00bness.

  Hello:

  It's hard to say. By the book, they should be replaced. But if they always seem good and you don't lose the thermal material then you can probably use again them.

  You should never attempt to fill the gaps in the thermal paste, but it's up to you (I did previously on pads thermal office and never had a problem).

  Just make sure that you use good quality thermal paste and apply it sparingly. You want just a thin layer between these surfaces.

  Worst case scenario is that if you find your fan running higher than expected, you need to go back to the drawing board.

  Paul

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Pavilion g7 thermal grease for Proccesor graphic.

  Pavilion laptop g7 requires thermal grease for Proccesor graphic?

  Thank you!

  Whenever I have repair a laptop I remove thin aluminum shim and clean the heat sink. Then I use a small amount of artic silver (my choice. There are others) a thin layer is fine. The thing to watch are the pads of heat transfer of silicone that maybe on graphic memory chips. Do not put any HT composed on those. You can find sheets of silicone in line. (color = thickness) HT silicone pads are also used on the northbridge, and sometimes on both voltage regulator components.