128 and 256 tracks of duplicates

Similar Questions

• How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  How to store the original and to remove some duplicate songs in iTunes on a PC Win7, which took place after iTunes to scan for music during a re - install?

  I recently had to format my hard drive and reinstall iTunes 12.3.2.35 on my Win7 PC. As part of the re - install iTunes, I clicked on the button scan for music.  This has created duplicates several of my songs.  I deleted then the duplicate songs from iTunes, but when I went to play a few songs a pop-up said "the song would not be because the original could not be found.  You want to locate? "When I tried to locate the song it is not found, but when I pulled the songs out of the trash they could be found.

  How can I keep the original and remove any duplicate songs in iTunes on PC Win7 which took place after iTunes to scan for music during a re - install?

  iTunes can create duplicates if the same content is added several times from outside the media folder when it is about to make copies of everything that is added to the library, or is added from an external drive that hosts the press kit that was disconnected during the launch of iTunes.

  Official notice of Apple on the duplicates is here: find and remove duplicates in your iTunes library. This is a manual process and article fails to explain some of the potential pitfalls such as the lost coast and membership of playlist, or sometimes the same file can be represented by multiple entries in the library as well as a removal and recycling the file will break all the others.

  Use MAJ > display > show items to reproduce exactly to display the duplicates because it is normally a selection more useful. You must manually select all but one of each group to remove. Sort the list by Date added can make easier select appropriate tracks, but it works better when executed immediately after the dupes were created.  If you have several entries in iTunes connected to a same file on the disk hard then don't not send to trash.

  Use my DeDuper script (Windows only) If you are not sure, do not want to do it by hand, or want to maintain ratings, play counts and playlist membership. See this background thread , this post for detailed instructions and Please take note of the warning to back up your library before deduping.

  (If you don't see the menu bar press ALT to temporarily view or CTRL + B to keep displayed.)

  The latest version of the script can put away the dead links as long as there is at least a double live to merge his stats and membership of the playlist and must deal wisely when the same file has been added through multiple paths.

  TT2

• I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  I already have an annual subscription to the export of Adobe and Adobe track, but it does not work on my new computer (Windows 10). Help, please.

  Look under Tools.

• Timeline between video and audio tracks splitter

  The separator between the video and audio tracks on the timeline is very difficult to see. Although it is thicker that other lines of demarcation is not yet clear enough for many people. Y at - it anyway to change the color of the "divider". Does anyone know of a plugin or a workaround may achieve this result? Ideally, we should be able to change the thickness and color so that the timeline between the video and the audio division are visible immediately by glancing at the screen. Can anyone help?

  Unfortunately, no thickness and color cannot be changed, and I've never seen a plugin to enable this. Sounds like a feature request for me!

  Feature request/Bug Report Form

• By aligning multiple video and Audio tracks

  I am a multi-instrumentalist and worked on videos of my songs.  I save in Adobe Audition CC.  I've usually will start to record the audio/video with my Nikon D3200 as well as with studio microphones that record in Adobe Audition.  I add then several tracks on this track main video/audio recording to play the electric bass, banjo, mandolin, and percussion etc.  I mix all the tracks and send video clips to make a video in Premiere Pro.  I found that the main (usually guitar track) syncs perfectly with the video camera that I put in the calendar when you use the synchronization in the first feature.  From what I've read, if it is only possible to do this with a video and audio track.  I need to find a way to be able to align the other video sequences with the main audio.  Does anyone have a workflow that make this process easier for me?  Is there a way to do what I'm maybe missing out on Premiere Pro?   Please help me if I can continue the creative process!

  This is an example of what I'm doing https://www.instagram.com/p/-snqVSwzft

  I had to align that laboriously trying to watch the movement of the hand, but there must be an easier way.

  Audio and video synchronization begins to shoot and carries through to the edit and mix.

  Create sync audio and video synch and they will line up in the chronology of the edition.

  A simple way for you to do is a snap of the hand or a tap pronounced on the handle.

  Pro is use timecode in photo and audio recording device.

  Click on the titles and click count-ins are useful for musicians when more dubbing and overlay track.

  Its nice also.

• Map Module: How the "Next Track" and "Previous track" used?

  I shoot with multiple cameras with a parallel tracklog in a Garmin GPS unit and think that this feature can be useful, but there never seems to be enabled. How and when it is activated? It would be nice to have an easy way to scroll the ratings the way I imported without having to pick them through the most recent or the file system.

  Thank you!

  As far as I KNOW, the "Previous track" functions and "Next Track" allow you to scroll through all the separate tracks within a single tracklog.

  I think that the terminology can be kind of confusing.  There is 'tracklogs", which are the GPX or KML files.  Then there's "leads," which are the individual legs of data stored in the tracklogs.  I think that most people probably just record a track by tracklog, but hypothetically, you can record several tracks in a single tracklog.

  So, let's say you are on a shoot outside and you record your GPS tracks.  You thousand hiking, stop the track and then start a new track in the same tracklog.  This would give to ultiamtely you a single 'tracklog' file which contains two separate "tracks".  In this case, orders of "Next Track" and the "track" would let you switch between the two separate tracks in the tracklog.

  In short, my impression is that the "previous track" / "Next Track" only functions to navigate between multiple tracks in a single tracklog.  They don't allow you to scroll your tracklogs.

  I remember messages for a long time on this issue. People are wondering why the "previous track" / "Next Track" commandments were grayed out and wondering if it was a bug.  I don't know if they just misinterpreted these commands as switch between tracklogs instead of titles, or if the duties were actually not work correctly with tracklogs that had several tracks.

• Map satellite A100 - 163 ATI x 1400 - 128 or 256 MB?

  It is said in the specifications of its 128 MB more than 128 MB. How to do the extra 128 MB? Is it automatic or is it in the BIOS?

  Thank you

  Hello

  This device was shipped with a X 1600 and X 1400 graphics card.
  I know that the ATI mobility Radeon X 1400 supports 128MB and the X 1600 256 MB.
  I guess that the same manual was delivered for both units with a different hardware configuration.

• Movement of mask and the track Matte Question - why it doesn't work?

  Hi first gurus...

  I am able to use the first titration module - to create a mask - then the Luma put on the effect of TrackMatte to isloate a region of the video (I duplicated the original) which I am interested.

  -By of many tutorials/videos online, I've found.

  Question: Why - can I not use the mask / "exit" from the ThreeWayColorCorrector to do the same thing?

  Image - duplicate the clip - drop the ThreeWayColorCorrector - using "High color" mode - to isolate people form (from an extract of the interview);  the background is black... the contour hair root and the body of the interviewee is white.

  I get white/black - because I passed the exit of the ThreeWayColorCorrector to 'mask '...

  Now - when I drop this clip on my video editing - that I use for the TrackMatte effect - it does not work as I had expected, it could - at all...

  Very disappointing - it would have been a very powerful way - to create a mobile cache to work with the TrackMatte effect...

  If someone has done something like this before? Y at - it an easy solution - or a setting that I missed...

  This should work really - not?

  Some information:

  I work with a GreenScreen shot - with lighting poor to separate the hairline of the screen.

  Work with green screen - subject to blonde hair.

  I thought that the retro-lighting/hairlight was not necessary - I was wrong.

  Now with the green screen hidden using this ultra key - get jagged effect around the airline and what looks like the snow and noise around the fringe.

  I thought en - 1) video duplication and combining with effect 2) TrackMatte - use a mobile mask that matched just the root of the hair/plan - I might be able to blurr the edge enough to get rid of the unpleasant effect I see...

  As BIG as the UltraKeyer is - different parameters of transparency/spill/Starter/soften seem not to be able to remove the ugly/noticeable hairline artifacts that I see...

  New - look like jagged effect / snow...

  Any thoughts?

  
  Thank you

  F

  In my opinion, the track-bearing on Pr capabilities fall away from the brand.  The fact fcp7 as it is very useful.  The limitation of the matte in public relations is that the mast is adjusted on the layer is hidden.  You can animate and change the scale and position of the track matte layer, but if you want it to run in smooth synchronization with the matted layer, you're in for a bit of work.  Ideally, you should be able to pan and adjust the layer being hidden inside a motionless mask.  Can-do that elegantly in PR.  This is a faulty design of the Pr, IMO.

  As a general rule, you must go to EI for the good contols, where you have all the power of masking you need, with the exception of the variable feathering, and who is rumored to be included in AeCS6.  Also it would be nice to be able to follow the points of mask, which is not currently in Ae either.  But that's another debate.

  That said, I am able to use the mask to a secondary use as a Luma matte.  Not sure why it does not work for you.  Have you played with the secondary commands sweetness?  I couldn't even be after what is your problem.

  However, here is a tip that I use with Ae that might work for your problem of inlay.  Use two instances of the Keyer.  Use all first to create a "garbage" key, where you will have the most greenery, leaving only a border around your subject.  Then, you can use the second instance of the Keyer to hone in on the edges.  Give it a shot.  Might work for you.  This method gives you an option to avoid the harsh cleanup settings of Matte with eradicating all the Greens in a framework.

• How to restrict privacy and-not-track since the config file settings?

  If possible, I want to create a GPO to allow our associates to change browse privacy menu so that they are unable to change the default options.

  Note that the do not track power only makes Firefox adding a DNT = 1 HTTP request headers.

  • https://www.Mozilla.org/en-us/Firefox/DNT/

  This has been changed to active/inactive status and is therefore no longer a framework three States in versions of Firefox current (i.e. privacy.donottrackheader.value is no longer supported).

  • bug 1042135 - back do not follow preferences in order to be a simple switch (privacy.donottrackheader.enabled)

  Copy the following code in the mozilla.cfg file should be enough to ensure that the value is blocked to the false state.

  //
  lockPref("privacy.donottrackheader.enabled", false);

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  Among others these functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/

• Photos about El Capitan - double and the names of duplicate files

  Hello, here is a brief summary of how I got here:

  Rebuilt my MBP after you install a second drive. Before that, I backed up all my stuff, using time machine on an external drive of USB3 and manually by using the old method of copy/paste shaped on a second drive USB3. The manual copy consisted of important files such as photos and my photo app library.

  After I rebuilt the system, I copied my library of photos from my backup copy manually in my pictures folder. Then I ran the Photos app and imported this library (I think now that it was a mistake). I then activated iCloud photo library. This began a process of downloading pictures of 18 500 towards the cloud again. At first, I thought... not worth it... it will merge if something is missing.

  Now I was left with many duplicates, I mean a lot. However, the size of the photo library is smaller than it was until I started actually a few GB.

  So, without having the two libraries side by side and comparison - is it possible that the library has not merged correctly but duplicated in fact all photos where file names are the same?

  So, if I got three photos with the name, IMG_7133.jpg, but they were taken on different days, or even several years. But, if you perform a copy and paste manual and you lose a part of the metadata, could all three of these photos be duplicated and crushed (duplicate in this case)? Perhaps it takes the first picture with the name and creates two versions most of it?

  If anyone knows how this works or can vouch for me (and my nerves) Photos would not replace any existing pictures, I would be very grateful

  Thank you very much

  Gerry

  Then I ran the Photos app and imported this library (I think now that it was a mistake) .is solution is going to be

  Yes - a massive mistake - ever import a library as it does not wok and creates a huge mess with a lot of "duplicates" and many other problems - you open libraries - likely the solution will be drag drag the poor desktop library (if you have space) and drag the library of SMT in the folder of the picures and double-click it to open it - it should be good and after checking He can trash trash bad on the dektop library

  LN

• Use iPhone as iPod and Fitness Tracker

  So, I have a few guess strange question, but I'm having a hard time finding an answer...

  I have a unlocked iPhone 6s I bought off eBay with a screen of crack for cheap. I'm looking to use it as an iPod and a discount tracker-shaped. Of course, the part of iPod is easy. But my big question is, to use as a fitness tracker I need to activate it? GPS capabilities, for a more effective follow-up, will be active even if the phone is not activated on a network?

  Thank you for your time!

  Hi LadyG4309,

  Welcome to the communities of Apple Support! I'm sure we can help you on with your question, or at least you pointed in the right direction. To access most of the features on an iPhone, it would need to be activated. If you are experiencing problems activating your iPhone, you can find information and troubleshooting procedures described in the following article useful:

  If you can not activate your iPhone - Apple Support

  On the other hand (since it is a second hand iPhone), if you see a lock of the Activation screen, you can find this article most useful:

  Find my iPhone Activation Lock - Apple Support

  Concerning

• iTunes game, with tracks and local tracks on iTunes

  Hello

  I turned off my game subscription itunes and it will expire in a few days. I'm sure I know the answer to my question, but it did not hurt to double check. I have a central itunes library, when iTunes is initially came out, I was able to improve the quality of many of my pieces of 128 (which was considered of good quality for the original iPod). It means I have many other corresponding titles. I almost never listen to music outside of my home and use an old ipod nano for music on the go. So I do not use the cloud to itunes. I re-read the email from apple and I'm right, that the relevant securities shall not perish from my library, they just won't be available to download on my iphone/ipad. I can always sync them by wifi or cable if I want.

  I want to check that not all of a sudden the music in my library could disappear...

  Thank you for calming my nerves (and yes I'm 99% sure, but who can nag 1%)

  Kind regards

  Philly

  As far as I know, the music libraries will remain intact. The only thing that will change for you is that you will have to synchronize the music libraries manually (whether it is via WiFi or cable).

• Problems with FLAC and blank tracks

  I'm not sure how the word this problem, so if it has already been covered, I apologize.

  I'm trying to load a mixture of FLAC and MP3 on my rocket. I have all the songs are sorted into folders by artist and then album. Some FLACs tags are recognized. They have all been published by new version of WinAmp.

  I was wondering if the file naming scheme makes a difference, so I re-named them. It wasn't the problem, but he reveals another problem where once a file is placed on the "rocket", any manipulation of this file is not recognized. If I re - name, the "rocket" simply sees the old file name. He can still play, however.

  If I delete the file, the "rocket" recognizes SOMETHING. What is there appears as a Virgin artist, album and track on the "rocket". If I try to play the lost files, it simply ignores them until you reach another file that is completely "there". If I try to delete these ghost files, the player blocks until finally shut down. The phantom items are represented by apparently random characters. Once, they were '+' sign, and twice, they were ' > ' and '='.

  I tried to change the content of the "rocket of" Rhapsody, but it does not recognize the FLAC, so it is useless.

  amartincolby wrote:

  After your comment about automatic detection, I went and changed to MSC. It evokes the "rocket" as a drive, now, as opposed to a media player. Explorer Windows now says that the 'Music' folder is empty.

  Files loaded in MTP mode does not appear in MSC mode.   And viscaversa.

  Do all your tag / changes of the name of the file on the computer, and then copy and replace the files of the "rocket" (at PSG), not sure of MSC.

  When you delete a song.  You disconnect the "rocket", and it updates its database?   But you still see the name in the game menu?  The "rocket" makes a database and displays for the selection, I think it might be corrupted.     Format and reload your music should fix it.

  See you soon,.

• How to view the list of available fonts, and if there are duplicates?

  I can enumerate in my control panet, but he can't find anywhere that I can list and see and example!  I have too many other duplicate how do you recommend deliting copies?

  * original title - more information on the issue of fonts *.

  Hello

  I suggest that you follow these steps to remove duplicate fonts:

  a. click on "Start" and select "Computer" (Windows Vista).
  b. double-click on "Disk (c :)) Local".
  c. double-click 'Windows' then 'fonts '. Opens a list of all the installed fonts.
  d. right-click on the installation of duplicate fonts, and select 'delete '. A police duplicate will have one "[1]" after his name. For example, you will see a file named "Garamond" and "Garamond [1].» In this case you click right on "Garamond [1] ' and select 'delete '.

• View the log files and message tracking

  Just our ES3300 running. Looked through the Administrator's guide and searched a bit, is there not another way to view a log of what happened through the system of having to download log files?

  Message tracking would be done in the audit.

  Is not necessary to download and browse through the newspapers unless your train to solve a problem.