13.6.0 is the same in Windows Vista like in Linux?

Similar Questions

• drivers windows 7 the same as windows vista drivers

  I spent nearly two weeks, upgrade XP to windows 7 - a nightmare

  I have a problem of virtual paperport driver... not supported by paperport or brother printer

  TWO questions

  generally are the same as Windows 7 drivers drivers Vista?

  (2) I have a laptop Dell crashed (coffee spill), if I remove the hard drive (OK not wet) which has windows XP on it and install it in a laptop Dell SAME-same processor, etc... who currently has windows Vista until its BONES... the laptop starts & exploit?

  Hello

  1. if the operating system is different, the drivers are never the same. The drivers are designed and programmed primarily to be 100% compatible or work with an operating system unless the manufacturer is also developing drivers for other BONES. That said, a XP driver is not the same thing as Vista, Vista is not the same as 7 and 7 is not the same as 8. They are all developed to work properly and tested with their own operating system, that's all. You pouvez however install 7 drivers on 8 for example, if you run the driver setup .exe to ensure compatibility with Windows 7. The drivers will work 100%? Never a guarantee.

  2 it might work, however, you can get a message on your product key is not valid no longer during which you must then try to reactivate, l or contact Dell.

  Kind regards

  Patrick

• I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer. If yes how can I do this?

  I got a new computer (an old dies) new a windows vista and I have to disable the old computer before I load the same copy of Vista on my new computer.  If yes how can I do this?

  If Vista is preinstalled on your OLD computer, it is classified as an OEM license and is not transferable.

  The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
  You cannot transfer it to another computer/laptop

  If a license of Vista at retail, you can transfer it to another computer/laptop.
  But it can only be installed on one computer at a time.

  A single license is a single Installation.

  If it is a retail Vista license, read the information on the clean install and then reactivate it:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to install a second hard drive in my laptop (mSata SSD), so do I create a system dual boot with the same license Windows on each disc.

  Original title: Dual Boot Laptop

  I want to install a second hard drive in my laptop (mSata SSD), I have two programs to install that "do not receive the", so I can create a system dual boot with the same license Windows on each disc. I can run only one at a time, and it's the same pc/laptop.

  No, you can't, a second facility would be like installing on a second computer, you will need to purchase a second license.

• How to animate canvas Link to open in the same browser window?

  I have created a Web film animate CC and want to click on it to post a link to a URL.  However, I want the URL linked to open in the same browser window - not a new browser window.  I used the code snippet of the canvas in order to link the URL, but it seems to work for opening in a new browser window.  How can I change the code so that the link opens in the same browser window?

  Please notify.

  Thank you.

  _Self to use instead of _blank as target.

• Open in the same browser window

  I made a flash element for my dreamweaver website. I have an invisible button on top so when you click on it, it opens a new page. I'm trying to make sure when you open it, it opens in the same browser window. I tried to make the target itself and it did not work. Any ideas?

  _self must be in quotes

• Cannot connect two work spaces in the same browser window

  Hello
  Happy holidays to all. I have problem to identify two workspaces (associated with two diagrams) in a browser with two tabs in the browser. The situation as the following:
  
  -Using Internet Explorer 7.0 or Firefox
  -Login in A work space, associated with the AA scheme. (connect successfully)
  -Then, click New tab in the same browser window, log in the workspace B, associated with the schema BB. (connect successfully)
  - The tab of connection of space one was closed (kicks) automatically.
  
  If I open two separate browsers, I can connect a work space in the window of a browser and connect another workspace in a separate window, not tab.
  
  Why? Is somewhere, I missed setting or configuration for APEX? All advice is greatly appreciated.
  
  Candice

  You're right, you can't do that.

  Try using Firefox chrome and one for the other.

  Tyler Muth
  http://tylermuth.WordPress.com
  [Oracle security application: development of secure database and Middleware environments | http://sn.im/aos.book]

• Hyperlinks open in the same browser window

  Hey Gang!
  
  How do I create a hyperlink so that it opens in the same browser window and don't keep open a new window each time?
  
  See you soon!
  
  Gregory

  Hello

  It's kinda a 'hack', but you can use a Flash movie embedded to have more control over the process of any hyperlink. Basically, you simulate the hyperlink to a button in Flash, but instead of looking like a navigation button, you use the text of your hyperlink. This has the added benefit that you can make the text respond to mouse rollovers and clicks with a color change, something will links in PowerPoint.

  So, assuming you named the instance of your 'button' as myLink_btn, you add some actionscript to the main timeline:

  myLink_btn.onRelease = function () {}
  getURL (" http://my.url.com/index/index.htm","_self");
  }

  You compile your little Flash movie and just embed in your Powerpoint where you want. The student will never see the difference. We use this solution to provide the student a "Printable" presentation version - until we compile the PowerPoint with presenter, allows us to make a pdf Acrobat version and upload it to the Breeze server. On the first page of the presentation is a based on flash "link" to the pdf document, and the student assumes only Breeze is 'print' a copy of the presentation.

  More on getURL: you can have load a window named by replacing '_self' by the name of the window or a new window with "_blank". The getURL command also allows to send javascript commands in the browser that is running the Breeze presentation. If you need to use relative links (if you go to the construction of a stand-alone application on a CD, for example, and you want to link to the pdf documents in a subdirectory), this is the best way to do it, as the presenter did a bad job of conversion of links in PowerPoint. And, as I said, you can have the links "light up" when the mouse user above them, something that connects in PowerPoint will not be.

  But... to say that you have 30 pdf documents on your Breeze server, and you want to make a navigation to a simple page for them. If you are not concerned about LMS data capture, it's MUCH easier to simply create the interface all in a single Flash document and send the student to one - just put all the pdf documents in a folder on the server of the game is to "allow public consultation", and they don't don't even need to log the server to read. :) It is an excellent solution if your company is like mine, where some people have created their own little fiefdom controlling the real web server, and you use Breeze to accommodate all kinds of resources that would normally be available on your intranet. If you say that you want to host a resource on the 'web', you will need to go through them (and what a pleasure a process i.e. - they insist on building everything themselves to justify their budget)... but if its on 'training Breeze sever', they don't care.

  Laughing out loud.

  v/r,
  ~ Marc B

• get the 0x400110020000100b error code while making the recovery of the system for windows vista 32 bit.

  I tried to do a system restore on my laptop using the included recovery disks and had this error 0x400110020000100B. The drive looked pretty beaten last week so I ordered a new series. Now, when I got to put disc 2 in (to 80% full) I get the same error.  I called customer service and he took me through the process of F9, nothing works and I also tried the F11 approach that made me not the case.  I'm frustrated because I don't really have the money for a new laptop computer.

  Laptop is a HP Pavilion DV6700.

  Any help would appreciated more than you know.

  The system is Windows Vista 32 bit

  The guy on the phone said ' well, you know it's a pretty old computer... Thank you gee...

  Hello:

  See if you can make your own Vista installation disc if you can read the product key 25 character on the bottom of your laptop.

  Here's how:

  If you are in a fault light but rewarding you can do yourself if you can read your product key of Vista on the PC of 25 characters.

  You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  Do not take into account the part of the text in the first screen shot about "extract the files in the folder of Vista."

  The files were extracted already in this folder when you ran the X14.exe file by reading the text on top of the first screenshot.

  The other thing I noticed is on the 4th page, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in me, and then other codes already filled in.

  When I went to compile the ISO file, ImageBurn gave a message on a WIM file, file and ISO, and if I wanted to burn it in a different format.

  I selected no, make the ISO file.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them one my hp dc7100 CMT desktop PC, worked flawlessly.

  When you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-v...

  After you install Vista successfully, you can then install the drivers for your PC and driver page support.

  Paul

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to have 2 copies of documents on the same screen in Vista

  How to have 2 copies of the documents on the same screen in Vista?  I am trying to clean up the documents folder and want to drag folders of one over the other.  I'm used to be able to do under Win XP.  Did not understand how to do it under Vista.  Have to continue to go back is a pain in the pututie.  TNX in advance for your help.

  Open the #1 file... Then, open the file #2... Right-click on an open bar space tasks... click on see the windows side by side.

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Cannot proceed with the activation of windows Vista

  Hello

  I had installed windows Vista Home Basic with its full product key original on my laptop today and a pop up problem showed that my windows vista cannot be activate as the product key is already in use, my previous laptop always with me which is windows active vista Home Basic product key up what must I do to solve this problem of activation? pls help me...

  Khalil,

  Allan.

  I had installed windows Vista Home Basic Edition with its product key original on my laptop today and a pop up problem showed that my windows vista cannot be activated as the product key is already in use, my previous laptop always with me the Home Basic windows vista product key is active but im planning to sell my laptop previous to my friend. What should I do to solve this problem of activation?

  Hey Hashiriya Allan

   
  Microsoft licenses part of it is that a single license is for a single installation
  You can not have vista installed on two laptops using the same product key
  and if vista was preinstalled on your old laptop this is an oem license and cannot be transferred to another machine

  Walter, the time zone traveller

• Silverlight will not install on my computer. I get an error code 659. Silverlight has worked on computer at the same time. Vista in Home Office business management.

  Silverlight will not install on my computer.  I get an error code 659.  Silverlight has worked on computer at the same time.  Vista in Home Office business management.  Can someone help me with this issue?  I installed Vista service pack 2.

  johncoxcpa,
  Well looking at the log you've posted, I came across this article:
  MSI (s) (2 c: D4) [22:29:29:073]: sequence number number for this installation system restore.
  This installation is forbidden by system policy. Contact your system administrator.
  c:\c17e5b6672c37d9f685b\Silverlight.msi

  So it seems that if your system has a software restriction policy installs.  You need to contact your IT Department. to learn about the changes to the policy will be to install Silverlight.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.