13 - c050sa: I accidently deleted the driver my laptop wireless. Help

Similar Questions

• Envy of HP dv7-7332ea: having problems to install the driver of HP wireless button

  Hi all

  I would really appreciate some help here. Recently, I did a factory rest on my laptop dv7 HP Envy but can't reinstall Windows 10.

  Before doing this, I was told that I need updates of Windows 8 to 8.1, and then to Windows 10.

  However, I am unable to Al of Windows 8 to 8.1 Windows I'm not all the drivers installed.

  For some reason, I am unable to install the driver of HP wireless button. Whenever I try to download through Windows Update in Control Panel, it downloads and after installation displays an error code 80070436.

  I am unable to get this driver installed and therefore cannot be updated to Windows 8.1. I tried to update to 8.1 without the driver, but my laptop is restarted it got stuck at 82%.

  I would be grateful if someone could give me some advice or help get this sort I seem to keep hitting a brick wall.

  Thank you very much

  Ian :-)

  You are the very welcome.

  You will be able to install W10 directly without the need to spend any other OS.

  I did it several times already, so I know it works.

  Twice on nine discs in a solid state on laptops that had previously been W10 on the old mechanical hard disks.

• There is a problem with the driver for a wireless adapter that if it is not compatible or not supported

  My grandmother came to visit me in Belgium and brought her laptop with her. It is Windows 7 and I bought in Ukraine. Thus, she cannot use wireless internet at my place. Troubleshooting scan says there is a problem with the driver for a wireless adapter that is it is not compatible or not supported, something like that. All sound systems are in Russian is not easy for me to explain it. Is it possible to fix this problem or she can't use her laptop to go on the net at all? Thank you!

  If it's a driver fault, can go you on another pc to work to manufacturers support web site for the 'Ukraine' pc and see if the wireless drivers are available there. If they are, download the latest compatible drivers for your pc and transfer them to it by a stick of memory from SD or USB and then install them.

  This may be due to a setting of your network security wireless, for example, that is your network is set to WPA2 but pc does not support. Check configurations for compatibility with your router wireless sound.

  See if anything here help - http://windows.microsoft.com/en-us/windows/setting-wireless-network#1TC=windows-7

  At worst, is it not possible to connect via a cable to your router, esp, if is only a visit to sound.

• I deleted the driver for the mouse and the mouse and the keyboard has stopped working.

  I had installed an updated driver mouse and mouse keep locking up. The Windows troubleshooting information indicates that I have to erase the disc from the mouse, and then reinstall the new mouse driver. When I deleted the mouse driver, the mouse and the keyboard no longer works.

  The computer is running Windows XP with Service Pack 3.

  The computer is one that I built several years ago.

  I tried the things:

  1. I tried the ALT, left SHIFT + Number Lock which is indicated as mouse keyboard operation who has worked in the past.

  Well it does not either from the keyboard is dead.

  2. I tried PS2 Mouse and a keyboard.

  3. I tried a keyboard and a USB mouse. The system shows new hardware found and he wonder then click NEXT to load the driver. No mouse, no keyboard, so no click.

  4. I can't get into the bios, because I can't hit keys to vector in the bios during startup.

  5. I tried to load the Windows XP disk, but the startup routine ask me to hit any key to boot from the CD.

  I have no mouse or keyboard control and therefore cannot respond to any action required by the system.

  Does anyone know a way to solve this problem?

  Solution of my wife - buy a new computer.

  Have a better solution for this problem?

  Thank you

  Bill

  Always try a PS/2 keyboard.  Maybe your PC is not able to access the BIOS, because the keyboard is USB.

  What make / model of the keyboard / mouse "kit"?

• safe to delete the drive working?

  Hello world

  each PP so often forget where my AE files even if one thing has not changed, and it requires me to link new and new rendering.

  I feel that my drive to work is filled with unnecessary files now take a lot of space. I don't mind made... Is it safe to just delete the folder where I store my scratch media or am I missing something / is there a way to remove the useless files?

  I use CS6

  It is safe to remove files generated as previews, .cfa and .pek files PP.  Premiere Pro will simply regenerate the files that needed when he needs them.

  However, AE project files are not on this list of things safe to delete.

• Qosmio F20-149: I accidently deleted the folder Power Saver

  Hello

  I have problems with the energy saver, but I could not uninstall and reinstall so I deleted the whole directory... an error! So can someone download me its Repertory Powersaver so I uninstall etc still files once and I can uninstall correctly it!

  I have a Qosmio F20-149, but with luck another Qosmio Version will do as well, too!

  thx for the help

  I don't think it's a good idea to install files to watch foreign power on your operating system.
  I recommend you to download the energy saver (if you have it t n), and then install it again.
  If the installation does not start because of missing files, so you must first enter in the registry, and then delete all entries of power gain.
  And repeat the installation procedure.

• Why iCloud pictures wants to delete the picture from my PC HELP ERGENT

  When I want to go out iCloud, I get a msg "all files transferred to iCloud will be effacΘ of PC", I won't delete the photos that I sent to iCloud.  What I've done wrong?

  Have you lost your photo on your PC?

• Error 13008 - deleting the .itdb files does not help. :(

  I tried to move my directory iTunes of my homedir on the SD card where I keep all my assets and, despite having (as far as I can remember anyway) set up iTunes to stop the analysis of the file homedir first, now, whenever he's trying to start I get the fearsome "unknown error 13008. All threads I've seen on how to solve this say to save and delete the .itdb files in your iTunes folder and then restart iTunes. However, when I do this, iTune recreates (on the SD card, so at least I know that he uses the right place, and that it can write to the card), then crashes with the error 13008. Same thing if I rename the folder iTunes together.

  Any suggestions? I'm on Yosemite. I'd say what version of iTunes, I'm running, but...

  I make little feeling that this has not been done in the best way initially.

  Moving a library: quick response if you use preferences by default iTunes settings: copy the folder integer iTunes (and to ensure that all of its subfolders and files) intact at the other disk, hold down the option/ALT key to start iTunes and on request to select a library select iTunes Library.itl file in the copied folder.

• A5S82AV: Find the driver for laptop

  Hello, please help me find the driver below

  ACPI\HPQ6000
  * HPQ6000

  I use windows 7 ultimate x 64 and my product is A5S82AV (HP probook 4540 s).

  Thank you.

  Hello:

  You are using the correct version of the driver?

  I don't even see not listed on your PC support page (support site crashed on August 1 and has not yet been set).

  FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

• internal hard disk not found, to solve this problem try reinstalling the drive... Help, please

  I have a Dell Inspiron 1440 use for 2010 all of a sudden, I saw this error message 'drive hard internal found to solve this problem try to reinstall the drive' when I turned it on. Then I tested with other other laptop HARD disk drive and it starts fine. Then realized that the HARD drive was taken, at the bottom, a new samsung SSD 120 GB drive and installed on my laptop and try to install Windows 7 from a CD see always the same error when turned on.

  Please help with this question.

  Thanks in advance

  ROHIT

  Thank you guys!

  My bad after I installed the drive SSD the CD that was in the DVD player was the CD for Applications/drivers instead of Windows 7 disc. I just realized and installed Win7 on my new hard drive, my laptop is back to normal. Thank God! I saved 500 to get the new laptop.

• I have win XP Professional on my Presario CQ42-462TU. not able to find the driver for WiFi. pl help.

  I installed win XP Professional on my laptop Compaq Presario CQ42-462TU.  I could find most of the drivers on the HP website, but a compatible driver for winxp - wi - fi is not available.  in Device Manager, I find 'network controller' and "broadcom 2070 bluetooth" in yellow and question mark.  Help, please.

  Hello:

  This is the driver you need for your Broadcom 4313 wireless network card:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-81551-1&cc=us&DLC=en&LC=en

  Try this package and Broadcom Bluetooth driver to correct your Bluetooth:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-83092-1&cc=us&DLC=en&LC=en

  Paul

• Difficult to recognize the router my laptop wireless

  Every time when I log on my laptop (Windows 7 Home Premium), the wireless router is not recognized. I have to go to Device Manager to uninstall the driver for the wireless adapter and then reinstall it through a scanning process. The wireless connection works for about 10 minutes and then disappears again.

  I have to repeat the process of uninstalling the driver wireless adapter mentioned above to re-enable the connection.

  At first, I suspect that the problem is caused by the material of the adapter. I have replace the chip. The problem remains the same.

  Help, please.

  Kind regards

  Siu Kowng Lo

  1) update your BIOS firmware, download from the laptop manufacturer's website

  Download 2) and latest driver for chipset inatall

  (3) install the latest driver for wireless network card to download from the website of the manufacturer of laptop

  4)

• Question regarding the purchase of laptop wireless

  Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:

  1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?

  2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?

  3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.

  I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.

  I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.

  In advance thanks.

  Padraig

  1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.

  (2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.

  (3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).

  I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)

  My home network is a cable modem which is connected to netgear powerline devices (2)

  (via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable

  .

• Output Multipal Modem and Ports Com Usbs without deleting the driver...

  In my laptop I don't connect to many cell phones, now my problem is my Ports none is going too far and I do not use affected old Ports so I tried to find Solution on Web... I Manage to find Solution but I stuck when it comes to too many Ports... I want to release too many Ports in a short way.

  What I find Solution on the Web...

  Run elevated command line Device Manager:

  > set DEVMGR_SHOW_NONPRESENT_DEVICES=1
  > devmgmt.msc
  
  

  Turn on "Show hidden devices" in the menu and uninstall gray COM ports.

  After the display of hidden devices, it's hard to uninstall devices one by one... I want to erase a single Type of devices in a single order without deleting driver device because my goal is to free Ports as much as Possible without removing the device driver...

  

  Hello

  Currently, removing the devices in the Device Manager is possible, one device at a time. This is because each device has its own corresponding entries in the system files and registry.

  Kind regards.

• Impossible to delete the driver HP 8 files in repository under system32/driver store so that I can reinstall the printer software

  I used a freeware uninstall program with cleaned almost all traces of the HP drivers except these 8 files. When I try to delete in the context menu, then press the space bar, he said still "Destination Folder Access Denied". I have absolute administrative privileges in Vista Home Premium. How these files can be deleted ao I can reinstall the software/drivers for printer/scanner and I take advantage of my printer?

  Hi Don,

  Thank you for using the Microsoft Windows Vista Forums.

  I would recommend that you start your computer in safe mode and see if you can remove it from there.

  HOW TO START YOUR COMPUTER IN SAFE MODE:

  Remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click Start, Shut Down, and then, in the drop-down list, select restartand click OK.

  Do one of the following:

  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again.

  If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  In the Display Options Options Advanced startup, use the arrow keys to select the safe mode option you want and press ENTER

  Log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If please reply and let us know if your problem is resolved or if you need further assistance.

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.