13 stream: Stream HP 13 (13-c010nr) won't start - flashing caps LED twice

Similar Questions

• Satellite Pro 2100 won't start at all - LED flash

  My SP2100 began to have feeding problems and now won't start at all. The AC adapter green LED is lit, that are relevant lights on the body of the laptop (although the "battery charge" light always orange these days). When I try the switch on, startup begins (in fact succeeded on occasion until this morning), however the battery indicator and the adapter lights are flashing, and everything stops again.

  On the rare occasions when I'll be past this stage, lights blinking, and the system soon shuts down again with a screen message "low battery." Until this morning, he would sometimes settle, the computer remained on, and the lights showed a State of equilibrium as usual.

  Initially I thought that the problem was of course the battery or the AC adapter, but now I'm starting to think that it is with internal PSU of the laptop (although I suspect the battery is probably tour after all this part of loading and unloading).

  Any ideas?

  Hello

  I think you're right. Flashing LEDS are a sign that hardware is defective.
  I can't say what exactly is the problem, this should be verified by a technicain.
  On the other side I don't know if it's worth to repair such an old machine.

  Good bye

• stream HP 11: after update won't start

  I've updated my laptop last night and since I've updated, things would turn out. Guard goes to a blue screen and nothing happens.

  Hello @ccamp,

  Thanks for the quick response!

  Your product has the CPU and RAM to run Windows 10.  However, it may not have sufficient free space on the hard disk.  Windows 10 requires 20 GB to a 64-bit operating system.  Your product has a 32 GB hard drive.  However, more space is probably used for your current operating system.  In order to upgrade to Windows 10, you'll need to use an external hard drive, or USB, which is large enough to handle the upgrade.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Satellite L635-S3030 won't start - flashing cursor

  My laptop won't boot! When I turn it on, the Toshiba logo comes then it goes to a black screen with a small white cursor that turns into a smaller white cursor. It won't do anything else!

  It just flashes and when I press the power button it turns off. I need help!

  How can I get my computer to work?

  Hello

  I think you're talking about the cursor blinking in the upper left corner. Right?
  Well, I can tell you that the blinking cursor is a typical sign of a malfunction of the HARD drive.
  I think that your HARD drive is dead, and perhaps that is the reason why the laptop can not boot from the HARD drive.

  Solution:
  Replace the HARD drive and install the operating system using the recovery disk.

  Guarantee is valid? In this case get in touch with Toshiba Asp in your country to get this replaced.

• Desktop won't start. flashing green light

  I have a 1318NX Compaq Presario SR which will not start!  There is a green light flashing on the back of the power supply; which is normally green 110V AC is plugged into it.  I tried the trick of the Start button while not plugging the power cord... no help.  I also opened the case and carefully got rid of any power cord of all internal devices... the light turns green only when I pull the main power of the motherboard!

  I need to replace the motherboard?  Troubleshooting on hp.com site would indicate that the power supply is OK if the light is solid green.

  Thanks for your suggestions,

  Lou

  My wife's computer had the same problem several times. A solution I found that worked before was to unplug the power cable from motherboard and the power supply cable to the back of the PC and then connect the power cable and plug the motherboard power cable while holding down the power button. Scary, to say the least, but it worked, until one day I accidentally spilled the bad circuit breaker and then spend two hours trying the same solution with no luck and the Google search again. And here's what I found. It is the simpler solution even more cruel. It is simple and noninvasive and no matter how tech savvy you are. Take a blow dryer and turn it on to blow air at the rear of the power supply for a few minutes. When you see the light turn green, you're ready. It's worked for me after that it worked for a hundred others, maybe more. A look at the testimonials on this site: http://talk19.wordpress.com/2008/01/13/hp-m7088d-power-supply-led-blinks-green/. It's a shame that nothing like that appears on any site of HP. So don't waste your money on a new MoBo or PSU. All you need is dry hair of your wife.

• Satellite C870D-10 t won't start - flashing cursor

  Hello

  I'm really stuck here,
  A few days ago my laptop (Satellite C870D-10 t) began to have problems with its slowness and browsers started to freeze.
  Of control of virus then did a chkdisk and then the real problems started.

  When I tried to start (recommended), or reboot I get the message starting windows normally when choosing repair startup would start loading windows files then stop after the windows logo and go to a black screen with cursor.
  Security modes do not work either.

  I must of retries to more than 50 times until I then opted for drive recovery HARD and restore to the factory settings. After I did it I had a similar thing happenend.

  Windows first loading of files, windows logo, Assistant recovery: choose language, then the screen with the white cursor black... sometimes I got error F3-F000-0001
  Only on one occasion did he go a bit more far but left after the same error message I think.
  Restarting the disc also has not worked since the first time I did the HARD drive recovery.

  ANY HELP is very appreciated

  welcome them

  Hello

  I think that the HARD drive is faulty.
  The cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
  I recommend you to check the new HARD drive.

  Also a problem of RAM may be the reason for these problems, but I recommend check (replace) the HARD drive first.

• After 32RL933 the firmware update won't start no - green LED lights

  After an update of the firmware via wifi and use the TV for a few hours, when I changed the Source, the TV goes black and reboot, right now the TV is always black, green LED flashing and the screen turns black.

  I think it's a firmware issue, I tried to pull the plug and put back in operation and does not. I have donwloaded a rl933_748304.bin firmware on the site, loaded onto usb and plugged into the TV and does not work, so I think I need a "auto-install" firmware that runs at the start of the TV instead a normal firmware.

  I've read that a lot of people have this problem, I hope that you could give me support.

  Thanks in advance and sorry for my English.

  Try this:
  Turning the TV off. Wait 30 seconds, then press power button.
  Then OFF it again. Unplug the power cable and LAN cable.
  Reconnect the cable LAN and power ON the TV.
  Now reset the TV.
  GO to the system configuration menu, select TV point Reset and press OK to select.

• 4600 won't start

  Hi, community,

  my pro sat suddenly won't start. only power led flashes. Got out of the car, a piece of metal appears to be noise. But - if the drive is broken - shoulnd't the laptop will start anyway? Thank you for your help in advance. Wolfgang

  Hi, Wolfgang

  Yes, the machine must be able to start up indicating at least the TOSHIBA logo without the optical drive and fixed.

  Some background info: flashing DC-IN means that you have a problem of power supply to your machine.

  Please delete what you can without using a screwdriver. PC card, battery and so on. If you have 2 mem cards remove one.
  When everything is there, try to restart the device. Keeps blinking? If you had 2 plates of mem, remove the still inside and install another one in another location. Try again. Always the same?
  So I guess that there is a physical problem with the machine.

  If the machine starts normally, try turning off and to reconnect one removed items at once turn on the machine after each reconnection.
  Test them one by one and see if you can find out if there is a specific that causes this problem.

  Good luck!

  Tom

• my iphone 6s erased and won't start

  My Iphone 6s erased and won't start

  Hello

  Follow the instructions here, including contacting Apple Support or your Genius Bar reservation if necessary:

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

• Another that holding down the power button, then by restarting, how should I manage my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Another holding down the power button, then by restarting, how should I handle turn on my end 2009 27 "iMac when he crashes on the first blank white screen and won't start?

  Combinations of keys start for Mac - Apple Support

• Equium A100-147 tried to update BIOS, now won't start

  I was updating the BIOS on my laptop and now it won't start, the screen stay black and I just hear three beep. A long-term follow-up of two short.

  Any help would be appreciated,
  Thank you.

  > I was updating the BIOS on my laptop and now it does not start

  It seems that the update of the bios that went bad and had to be reflashed. Bios recovery is a delicate procedure and you should contact the service center:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite Pro 6000 won't start or do something

  Hello

  My satellite pro 6000 stopped working all of a sudden.
  Power led, battery, keyboard LED is on, but nothing happens, tried to remove the battery, cd, hd and put them back, nothing seems bad.
  Also tried the back button back in case but no tip was not all good.
  It just won't start at all.

  Any ideas out there?

  Thank you

  [Edited by: moderation of the Forum]

  Do the job of seem´to LEDs ok, or they do a code flashing for you say that it is something wrong?

• Qosmio G20 - won't start, error ATA #1

  I have a G20-102. Today I opened my flash drive and files all showed them as shortcuts. I tried to connect to Firefox 4 and a warning from AVG threat came pointing to C:\windows\system32\mssrv32.exe (Tr/Crypt.xpack.Gen3) as a Protection of identity. I opted for the "Move to vault" option and asked to restart

  Now my pc won't start - I get the Qosmio screen, ATA error #1 (CD player has been removed) and then the screen "rolls" - looks like random pixels flashing on the screen. I'm trying to start safe mode, but F5, F8 or any Fkey is not doing

  To make things worse, the CD rom has been removed, faulty, so I can't boot from another device. I don't have a USb in the BIOS, only FDD option which I did not

  Help, please

  Hey,.

  To me, it looks like a serious hardware malfunction

  You could try to load the default settings in the BIOS. Enter in the BIOS, and then press the F9 key to load defaults. Then save & exit the BIOS and try to start again.

  The HARD drive is recognized correctly in the BIOS? If so I try a recovery disk Toshiba recovery installation and check if the problem is hardware or software partners.

• In early 2011, MacBook Pro won't start

  In early 2011, MacBook Pro won't start

  Is-ti connected? Fully charged?

  Give us some facts!

• MacBook won't start - completely back screen

  2015 12 '' MacBook

  My MacBook won't start. I put on various points of sale and even changed on the brick of cable and power (I have an extra).

  Nothing happens when I press and hold the power button.

  Any suggestions before I take it to the Genius Bar?

  Here is some information that might be useful.

  After I press the button for a few seconds, the trackpad does not haptic feedback, confirming that this is the start.

  However, if I press the power button once again, I get haptic trackpad. It tells me that it is on, but I always get a black screen. And if I press the caps lock key, no green light appears.