1330 error when you try to install the software main street

Receive the following error message when you try to install the update of the software of Boulevard of Main Street Software, Inc. 2011 on a machine running Windows Vista 64 bit HP.

File 1330.A error required cannot be installed because the file E:\Blvd\Data1.cab has an invalid digital signature. This may indicate that the file is corrupted. Error 8205 was returned by WinVerifyTrust.

Another attempt to run this software update received the same message except the last line shows error 24592 was returned by WinVerifyTrust.

I managed to install the software on a laptop then. I already tried to transfer all the content of DVD on my hard drive, then by running the Setup program, without success. I have also tried to run Setup in Windows XP compatibility mode, receive the same error message.

It is about a Windows update that has caused similar problems for other users.

KB978601 causes "signature digital invalid" error with a CAB file
http://www.win7heads.com/Windows-Update/73744-KB978601-causes-invalid-digital-signature-error-cab-file.html

If you have this update on your machine, you could try to uninstall via 'Programs and features' and 'View installed updates'.

There are many other causes mentioned in these links too.

http://www.Google.com.au/search?q=error+24592+was+returned+by+WinVerifyTrust&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = jLYyTJSoIoPJccP6mbYD

http://www.Google.com.au/search?q=E%3A%5CBlvd%5CData1.cab+has+an+invalid+digital+signature&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = p7cyTP2aEc3Jcda52dYD

What have to say about this, if you contact the software factory?

The reason why it happens a machine and not the other could be because some of your programs or the system is missing updates, have older versions of the software, or third-party programs interfere with the installation.

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135

Tags: Windows

Similar Questions

  • Advpack.dll error when you try to install the software

    When you try to install new software I get the following error: "error creating process . "Reason: C:\WINDOWS\system32\advpack.dll ' any idea how to deal with this problem?  XP Pro SP3.

    It turns out that I tried to install a 64-bit version of the software in question.  This being the SonicWall VPN client software.  I thought I was running my system to 64-bit I use the Athlon 64 processor.  Install the 32-bit version worked and solved my problem.

  • Error when you try to install the software update of tax

    It is for the HR Block Tax software,

    Update installs successfully on the XP machine, but on windows 7, I get this

    "Windows Installer does not allow patching of managed advertised products. At least one characteristic of the product must be installed before applying the patch.

    I made sure that it is running as an administrator. Tried to use the previous version of windows. Still lost.

    Google and seems that it may occur with other programs as well. Have not found a solution very clear.

    Hello Joslinm,

    1. do you get this error when you try to install any other application?

    I suggest that you contact the H & R support and check if the application is compatible with Windows 7. Here is a link you can follow to contact support:

    http://www.hrblock.com/support/index.html

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems) in Vista

    Get 800b0100 error when you try to install the update KB905866 (Mail filter spam for x 64 systems). It keeps failing even though I followed the steps all the recommended (in aid) and installed some other stuff.  Tried several times but nothing helped.  I saw a recommendation to install a Wups2.dll file but do not know if I should do it because the recommendation is for Windows XP and I have Vista Home.

    Hello

    I suggest check the link below and try do a SFC (System File Checker) scan and check if it helps.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    I would also say that you reset Windows update components and check if this may help.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

  • Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Disabled-Adobe Acrobat 9 Pro on old PC. Implementation error when you try to install the new PC. "Invalid serial number."

    Please see the following documents.

    1. Error "invalid serial number". Acrobat 9 | CS4
    2. Invalid serial number error

    Let us know if that helps.

  • Error when you try to install the browser first elements 10 Inspiration

    On the Adobe Premiere elements 10 welcome screen, I get an error when you try to install the browser of Inspiration (IB).

    Sorry, an error occurred.
    This application cannot be installed because this installer has been misconfigured. Please contact the

    author of the support application.

    I have uninstalled/reinstalled the latest Adobe Air. I have connected to photoshop.com while trying to install IB as well.

    OS = Windows 7 64 bit

    Adobe products installed

    Photshop CS5

    Lightroom 3.5

    Thank you

    The team and I worked to create this document on the issue. Can you try the solutions listed and see if it solves the problem?

    Can not launch/install Inspiration browser from the home screen. First 10 items | Win 64 bit

    http://kb2.Adobe.com/CPS/926/cpsid_92680.html

    -Dave

  • code Ox643 error when you try to install the update of security for flash player (KB923789)

    I get the error code Ox643 when you try to install the update for flash player (KB923789) security - after Mr fixit running and the application of other measures recommended, I still have the error code and get the installation error code. What should I do now?

    Is Adobe Flash Player v11.3.300.257 (or higher) installed? Test here using Internet Explorer (only!)-online http://www.adobe.com/products/flash/about/

  • Windows 7 - get error when you try to install the updates, code 66A

    I have error when I try to install update!  Code 66A. What should I do?


    * original title - I have error when I try to install update! Code 66A. What should I do? *

    Framework of 66A
    http://social.answers.Microsoft.com/forums/en/vistawu/thread/52538332-710e-4C29-BD5B-d08db7555bb3

    Step 1

    You can follow the steps below and check if it helps solve the problem of update installation.

    (a) click Start and click on Control Panel.

    (b) go to programs and features.

    (c) scroll down to Microsoft.Net Framework 4 Client Profile, do a right click.

    (d) it will give you a choice of uninstall/change, click it.

    (e) then it will give a choice to repair, choose repair. It will take 4 to 10 minutes to fix and may vary.

    (f) one when you're done, go to your update and Update Center again.

    Step 2

    If the steps above do not help, access the link below and follow the steps described in the article and try to uninstall all versions of the .NET Framework on the computer and reinstall all the versions of the .NET Framework on the computer.http://support.microsoft.com/kb/923100

    Check this reminder in the well: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a
    Diana D. (Microsoft Support) credit releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

  • 0x800A0046 error when you try to install the updates

    From: RCTaubert

    I just did a clean install of Vista Ultimate.  After downloading all the Vista updates, using Windows Update.  More updates installed for a few failed. I reinstalled Office Pro 2007.  I tried to install "Microsoft Update so I can get the Vista & Office updates on a single screen.

    From the "Windows Update" screen, I clicked on 'Get updates for more products'.  Which takes me to '

    http://www.update.Microsoft.com/microsoftupdate/v6/vistadefault.aspx?ln=en-us '.  I except the "terms of use" and click on "install".  I click on UAC to continue and immediately meet with the error message and the next failure: Microsoft Update could not be installed on your computer

    Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

    More troubleshooting options

    If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy. If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

    Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in Control Panel.  [Error number: 0x800A0046]

    I tried searching for this error number and found most of the questions & answers to several years.  I checked some of them out and found, I had already solution in place.  Hoping for more responses to day I write this messa.

    What should I do next?

    From: TaurArian

    See: Error Message When you try to install Microsoft Update on a Windows Vista-based

    computer: "could not install Microsoft Update on the computer.

    http://support.Microsoft.com/kb/933528

    --

    TaurArian [MVP] 2005-2009 - Update Services

    Another response of the community of Windows Vista discussion groups

  • BlackBerry desktop - 1935 error when you try to install the Visual C++ 2008 redistributable package.

    I try to install the software to my blackberry, but it requires installation of: visual c++ 2008 redistributable package.

    I downloaded this Microsoft, but when installing, it says "Error 1935" microsoft.vc90.atl, version "9.0.21022.8". How to solve this problem?

    Hello

    ·          You are able to install other programs?

    Step 1:

    a. clean uninstall of Blackberry Desktop software:

    http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02206

    b. download it from: https://swdownloads.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22

  • Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

    Original title: initialization error 112 Setup

    1995 installed Kodak DC200/DC210 Zoom camera software.

    Explanations with the error: decompress the program files not all charges.

    Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

    I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

    Thank you

    Destry

    PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

    D.

    Hi Destry,

    1 windows operating system you are using?

    If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

    For more information, please visit the following links:

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

    http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

    You can try to install the device in Windows XP compatibility mode and check.

    Check out the links for more information:

    How to troubleshoot program compatibility issues in Windows Vista

    http://support.Microsoft.com/kb/927386

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    Also read the following article:

    Error 112 Setup Installation Error message"when you try to install a program

    http://support.Microsoft.com/kb/326678

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Error when you try to install the updates to rules

    Hello

    I face below, the error message when you try to inject the new updates to the rules. Namely: Sourcefire_Rule_Update-2016-02-18-003-vrt.sh

    All the solutions on this one? For more information, I downloaded the file from the site and the name of the file has not been changed.

    Hi Tarik,

    I've seen this error when you use Internet Explorer to manually import the update rule.

    You can try a different browser supported.

    The release notes for the version that you are using will have the information of supported browser.

    Thank you

    Guillaume

  • Message "database is corrupted" when you try to install the software

    Bought a new computer and was trying to install my CS4. New computer is Windows 8 operating system. Don't know if it is part of the problem, the error message when you try to install is: "the Installer database is corrupt. Please call Adobe customer service. "Help, please. I need this software on my new computer so I can work again. Thank you.

    Try http://helpx.adobe.com/creative-suite/kb/error-installer-database-corrupt-install.html

  • Receive the message1606 error when you try to install the program or game

    I have TIME EVERY SINGLE, trying to install a game of realtimegaming.com, I have had NO problems with this before... tried to install Cleanup Utility - it didn't list EVERYTHING installs RTG, yet I am POSITIVE, the installation program does not INSTALL these games... Add/Remove Programs DISPLAYS all the games already installed RTG... RTG 'support' I suggest "use IE and disable the firewall and AV for the installation..." No question!   ANY IDEAS I can try? Perhaps, registry cleaner?

    Error 1606.Could not access network location http://setup.realtimegaming.com/36175/cdn/prism/02231123.cab.  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 7 b 31 36 36 32 63 61 35 {1662ca5 0008: 37 2d 63 33 38 38 2d 34 7-c388-4 0010: 66 36 66 2d 38 65 39 37 f6f-8e97 0018: 2d 37 39 36 32 62 30 32 - 7962 b 02 0020: 37 61 65 39 38 7 d 7ae98}

    Hello

    ·         Have you managed to install the games on the system before?

    As suggested by realtimegaming support, I suggest you to disable system security software and then try to install the game and check.

    Note: Activate security software once you've done the test.

    Also, I suggest to put the system in a clean boot state and check if you are able to install the game or not.  Follow the steps mentioned in the article below.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    I suggest you to check the below link.

    Error message when you install a program: "Error 1606. Could not access the network location. "All the users\ directory '

    http://support.Microsoft.com/kb/315352

  • 800b0100 error when you try to install the update KB968816

    Well, I get this error (800 b 0100) whenever I try to install the update KB968816. I have downloaded and run the system update tool. He has not fixed it.

    Is there a solution for this error?
    My plug for my laptop is:

    HP Pavilion DV5 1002nr
    3 GB memory
    232 GB of available disk space

    Thank you, Nick Hanson

    A program on your computer is perhaps interfere with the installation of KB968816.

    Try manually downloading and installation of (your anti virus or security software may interfere)

    http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB968816&displaylang=en&sType=s_basic

    Try to install after a clean boot.

    support.Microsoft.com/kb/929135
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    TaurArian [MVP] 2005-2011 - Update Services

Maybe you are looking for