15454-M6-AC spare air filter

Similar Questions

• Automatic shutdown of the PXI-1033 chassis. Noisy case fan.

  I went to use my PXI chassis today. I always keep power, but today it wasn't on when I went to for use. It turns out that there is an auto power down if the fan "fails". So, I removed the power to frame and then repowered the chassis. Heard a loud fan - as one of the blades reached something solid. And I only heard something when the chassis in the sense of 'big fan down' is the big fan on the "merits" of the unit which cools the boards. To resolve this problem, I removed the air filter and then the wire screen and then wire fan guard. I rebent the 4 feet of the wire fan Guard (be sure to rebend both elbows on each leg) so that it is wider the fan blades. Put back to gether and now no sound.

  Apparently my PXI chassis is part of a reminder "replacing the fan.

  See http://digital.ni.com/public.nsf/allkb/B9BB6E483EDB5353862578180081FA6A

• Filter Windows XP need to spare

  I have a dell latitude d610 is out of warranty, I have the product key for MS and I need the windows media replacement for XP so I can re - install windows

  Please see: How to request a backup Dell drive

• I have the product ID's but no disc. How can I request filter spare or can I use another dish of my other system?

  Can not find the disc, but have the code

  We have 2 desktop computers and my husband needs reinstalled operating system but we can't find the disc for it. I have the product ID for his. Can I use my drive to install Windows but equip the correct product of his computer ID?

  Hello

  You cannot use recovery to another computer brand and model for resettlement purposes discs.

  Your husband can contact the computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  It depends on what drive you are talking about when you ask if you can use your drive:

  If you have a DVD of Vista from Microsoft, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

  PS You need the product key; not the product I.D. for resettlement purposes.

  The product key is 25 digits, divided into 5 sets of 5 numbers

• Filter required to reinstall spare

  product key does not work, but did not come with one

  product key does not work, but did not come with one

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• Do not guard LED flashing on the map of 15454-GE-XPF to the catalog.

  He started blinking when I changed the 15454-CC-FTA = fan. As a first step, I think it is to reboot, but he did this blink for a day.

  It is a newspaper in the alarm and he said "SLOT 2 incorrect deletion". But I didn't even touch him.

  Details of indicators are: 3 LED light upward, then SF turns off, act out after SF. FAIL start to blink 6 times. This loop has continued throughout the day.

  Double click on the map in the node - go to conditions - click Filter - select all the boxes--shot back.

  Please let us know which alarm you see there.

  also go to view - inventory - tray control here - you are able to see your GE_XPE card.

  check the temperature on the node - go to the shelf display - supply - General - voltage/temperature.

  It seems that temperature node is not good or maybe a bad air flow and leading to a withdrawal on the card.

  Maybe the system does not recognize the card.

  solution will be... .abolish map... Wait awhile, to this good node temperaute and air flow.

  to insert the card, if she still have alarm incorrect deletion, replace it.

  But first check the temperature/air flow.

• Looking for a reputable application filter the blue light for ipad

  Can anyone recommend one? Except this one:

  Application dealing with health filter blue light with the eyes

  Thank you!

  What iPad do you have?  If you have one of these:

  • iPad 2 Air
  • iPad mini 2
  • iPad mini 3
  • mini iPad 4
  • Air iPad
  • iPad 2 Air
  • 12.9 inches iPad Pro
  • iPad 9.7 inch Pro

  They have Nighshift built in. Settings > display

  No third-party application would have the necessary access to change the view across all applications.

• Z400: Z400 spare parts upgrades

  Hi all

  I have a Z400 (saved to unset however) which works very well... Installed Win10 and voila! New PC.

  Thanks to the Info confirmed here, I Rev. 1 with 6 RAM slots

  Current config

  Xeon W3505 (Dual Core, not even Hyper Threading)

  12 GB 1333 Mhz RAM (2 gb x 6) clocked at 1 066 Mhz. thanks for CPU

  2 x Quadro FX580 cards

  LSI SAS3041E PCI-e Raid card

  SAS drives of 3 x 300 GB connected to the card from LSI

  PCI-e NETWORK card

  475w PSU

  SAS hard drives are noisy and slow (at 15 k RPM?)... First thing I did was to buy a Samsung 500 GB SSD Evo 850 (first day on Amazon with a $30 discount!) I checked and with the new BiOS installed (3.60) I confirmed that I have AHCI support so I hope the new SSD will bring me a big change even if only executed at sata2 instead of speed sata3... When the player is here I intend to remove the card raid and sas drives and install an extra sata 2 TB for storing drive instead... Also to get a pci-e sata3 card. Don't you think that it is worth more just go straight to the motherboard? I also read that start from a pci-e card slows down startup vs runnig just drive directly on the port sata motherboard, although running speed is slower. What you think. ?

  Next thing I look at is the processor. Thought of the w3680 or w3690... According to the price to get the ram at 1333 Mhz.

  Any other suggestions of CPU? Maybe the other supported that are not specified in the quick form.

  the current cpu cooler is rated for cpu 130w, so I think I should be fine... .unless you have a suggestion for a better option.

  I'm worried about the cpu power draw. Although I will eliminate 3 forts and power.hungry sas drives, I wonder if the current power supply will be sufficient for this and, possibly, a new graphics card. Maybe the new RX480 from AMD?  What do you think of it.

  ?.

  Your W3505 is already a 130W processor, so you have the fan Performance.  Moving around with either the W3680 (Search eBay for SLBV2 and you'll find some now to 93,50 dollars).  Or, if you want to spend 3.33 to 3.46 GHz speed spend the extra and get the W3690 for about 145.00 off eBay.  It's a psychological thing... you will not be able to make a difference in the real world, and all of the other major features are identical.

  The ultimate would be X 5690, which has a code unique sSpec SLBVX and used eBay now goes for about USD 245.00.  I got mine recently carefully shopping for 220,00, but revision 1 Z400 cost me only 100,00 more shipping charges.  I needed to do this test...

  I posted here about adding a map USB3.0 HP Texas Instruments... Make sure that it fits in a slot PCIe Gen II so the speed of the bus he let USB3.0 speed max.  My post has information on 5.25 HP 3.5 adapter that will allow you to place my interface front of Akasa preferred in this and below mount your optical drive in the Bay of spare up there.  I have included in on the device of 4-wire Molex brand OK to SATA power adapter I get Mouser.com to adapt perfectly to this card.  You end up with 4 slots USB3, 2 front back/2.

  Here are some links about this process:

  Here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/Z600-z620-front-panel-USB-3-0-upgrade/m-p/5545549/highlight/true#M11730

  Here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/USB-3-0-for-Z800/m-p/5066733/highlight/true#M4777

  and here

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/adding-a-USB-3-0-slots-ports-card-to-a-Z400/m-p/5086734

  You have the SSD... Gen II Gen III vs is not really a problem... take to plug that directly into the SATA port 0 of the motherboard.  Empty all SAS.

  I posted here on how to remove your spectacular startup time... reading about it.  The forum search box above to find these things.

  I added fan Northbridge 40x40x20mm, HP 4-wire version, a card mother xw6600.  Mine is screwed to the top the normal silver Northbridge heatsink fins, and there are several ways to reach that.  The fan blows away from the motherboard drawing cooler air through the radiator at the bottom.  The same fan is used on the Z600 Northbridge.  There is a standard white PWM header of motherboard close to spare, and I added a 4-wire Noctua online LNA that he abandoned his speed (which I do for fans of HP Northbridge).  Which adds to the overall length and connect the fan reach the motherboard header.  The RPM speeds now appear in the temp/RPM section of the Z400 BIOS as a memory cooling fan.  So, the original header seems to have been designed for a cooler of memory, but it is perfect for the Northbridge cooling.  One of these 2 processors speeds would stimulate the heat on the Northbridge and it was my solution (but probably is not really necessary).  I don't know if HP has never made a similar for some high-end Z400s, but seeing things fan used on the xw6600 and Z600 inspired me to add that, for this Z400.  You can get the fans with the correct HP wiring looking on eBay and China where they were all made.  It is precisely the Delta EFB0412HD-7R49 and this amendment at the end refers to the controlled PWM HP 4-wire version.

  You want all locations of memory 6 filled by identical 2 or 4 sticks GB, with speeds of memory at 1333 to get the best out of engineering memory HP and the fact that they will be able to run at this speed with these processors.

  The 6 HP PCIe supplementary power wire cable provides much more energy than the standard ATX 75W max... I do not a problem here for your video card needs, within reasonable limits.  Your use of the net power will be down and not upward, probably.

• MacBook Air freezes

  Initially 2015 11 inch Macbook Air 128 GB i5 freezes every now and then. When it freezes, I can not move the mouse or anything like that and I see no beachball. Anyone know what could be the problem?

  These must be run as administrator. If you have only one user account, you are the administrator.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter "BOOT_TIME" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the BOOT_TIME message that corresponds to the last boot time when you had the problem. Now, clear the search box to display all messages. Select those recorded before starting, during the time that something unusual was happening. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  For example, if the system is unresponsive or unable to stop for three minutes before you forced a reboot, post the timestamped messages within three minutes before the start time, not after. Please include the message BOOT_TIME at the end of the extract from newspaper - not at the beginning.

  If there is a long series of messages, please post only one example of each. Do not post of many repetitions of the same message.

  When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Step 2

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A crash report has a name that begins with the name of the process crashed and ends with ".crash". A report of panic has a name that begins with "Kernel" and ends with ".panic." A report of stall stop has a name ending with ".shutdownstall". Select the most recent of each, if any. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot. It is possible that none of these reports exist.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  If you don't see any report, but you know, there was a crash or panic, you can have selected diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• 11 - inch MacBook Air battery compatibility

  Hi guys!

  I have an old end 2010 11 inch MacBook Air. Is it possible to replace this laptop battery with a battery from a newer model with a higher capacity?

  Obviously, the laptop has is no longer guaranteed, so I'm not afraid to experiment.

  I would be grateful links to manuals, tutorials, guides, etc.. Thank you in advance!

  I wouldn't do it.  Note the spare batteries available on the website of OWC:

  https://eShop.MacSales.com/search/battery+MacBook

  They have a specific battery of 2010, then a different battery for 2012 and newer models.  It is fair to say that they are different.

  OWC also has instructions for Setup here:

  http://eShop.MacSales.com/installvideos/macbook_air_11_2010/

  Ciao.

• Questions to filter items in the Finder Automator

  Hi all.

  I'm having a problem with the action of the filter Finder items in Automator, and after traveling through post after post, I am not able to find a solution.

  I'm trying to pull a file created today in an email and send it to a specific contact. The files I need from this search action ARE emerging in Spotlight, kind of indexing has already taken place.

  My workflow looks like this:

  

  The filter window Finder items should be displayed a number of results, but instead, he gets up as stated above. Of course, since no files are, nothing can be attached to an e-mail message, so there is a mistake.

  Anyone can shed some light on this? I'm willing to use a workaround, because it seems that this issue has been plaguing OS - X. Please and thank you!

  Follows don't spare well because the found documents prior to the invocation of messaging application and are passed to the last action. Tested on OS X 10.11.3. Just add the action to send outgoing Messages to the next, and it will be complete.

  

• and installed this (I think). Printer seemed to work. Now say "impossible filter. sometimes footprints of Safari, but no word. Sometimes, it prints a page when I turn printer on and outside. It's crazy to do. Thank you.

  I have a MacBook Air. I use OS x El Capitan V10.11.12. 3 days ago, I installed a printer Epson L355. Everything seemed fine, when I first printed a few pages. I installed the driver delivered with printer and followed the Mac set up. The process has not completely finished the whole upward. I then found a Mac driver Mac page and installed (I think - how will I know?) and it seemed ok. When I used it the next day I kept getting message "filter failed" when you try to print from wifi. There is a strong wifi signal and scanning is ok. I can sometimes print a page of safari, but not from Word. I tried to delete and add printer's done everything to nothing. get him looking for a printer then message "filter has failed", with the printer in the "inactive"

  Can someone help me please? I'm getting worried and frustrated in equal measure. I'm not a techie and really evil.

  The message failed filter keeps the driver having problems of compatibility with the operating system and not the network connection to the printer. You mentioned with the driver supplied with your printer. This is linked from a previous version of Mac OS X, because sellers do not tend to get the latest drivers on the CD supplied with the printer. And then you install another driver, you can have caused even more conflict. So I would recommend that you delete the printer Printers & Scanners and then using the Finder, select go > go to folder, and then type/Library/Printers/Epson and press the Go button. This will take you to the Epson folder that has all the files in the printer driver. Select all the files and then trash them. Then, restart your Mac and when you are logged in, go to the Epson website and find the L355 printer driver that supports OS X 10.11. Download and install this driver, and then add the printer via Printers & Scanners again. Then see if you can print.

• How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

  Have you checked the settings > General > accessibility > greyscale > power off.

  If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

• half-wave rectified filter circuit/oscilloscope measurement

  Hello everyone, I hope I can get help on this fundamental issue, I'll have. University online, with which I will not help me, so I hope that I can quickly get assistance here.

  I have the myDAQ NOR, I have to build half rectified filter circuit with a resistance 2.2kOhm, I also use the multi-sim to confirm the measures of waveform. Everything goes well on Labview multisims Tektronix Oscilloscope compared to before I connect a capacitor 100uF my comparison heres:

  

  The model is just the Diode with a series resistance 2.2kOhm, I'm not sure if the analog inputs to the LabView Oscilloscope are configured correctly this is the air I get:

  

  This satifies my simple comparison on the Multisim circuit, since I came here for a few hours to play with probes analog input, I know that something is wrong out of these measures, I get.

  With a capacitor 100uF in parallel:

  

  

  

  I think the question is how I inputs analog and STILL plugged, I'm not sure that this is where I would really like some help or any type of assistance. Once I get this set up right, I'll be able to take measures for the frequency, load DC, P - P Ripple voltage ripple and then move to a full-wave rectified circuit. I just started a course and received the myDAQ.

  Henrik_Volkers wrote:

  Compare it with the current specification of output of your myDAQ

  Here is a link to the specification: http://www.ni.com/pdf/manuals/373061f.pdf

  Henrik hit it on the head.  The myDAQ can, at most, out 2mA with analog output.  So, with a 2.2kOhm charge, which puts you in 4.4V without the diode.  The led will also require an amount of current.  According to my estimates, subject of 1mA (your pic is ~2.5V, divide by the 2.2kOhm to get ~ 1mA).  You will see only that on the positive side of the sine wave as the diode blocks all the negative side.

  The lesson here is to make sure that your outputs have enough power to do what you want.  You can go to get a simple op-amp from digikey and use a follower of tension for editing the current upward.  You will probably need another power supply or two (+ 12V and - 12V) to power op-amp.

• How do to call the BlackBerry menu form share an Adobe Air application?

  Hello

  I'm looking for a tutorial or demo code that describes how to call the BlackBerry menu sharing an Adobe Air based application.

  I found a tutorial of waterfalls for it - there's one for Adobe Air too?
  - http://bbcascadescode.tumblr.com/post/38998702671/invoke-share-for-bb10

  This is a screenshot of the Action menu:

  

  Advice welcome!

  Here you go:

  package com.lib.playbook.invocation
  {
      import com.lib.playbook.controls.List;
      import com.lib.playbook.pages.TitlePage;
      import com.lib.playbook.renderers.IconListRenderer;
  
      import flash.events.Event;
      import flash.events.IEventDispatcher;
  
      import qnx.events.InvokeEvent;
      import qnx.events.InvokeQueryTargetEvent;
      import qnx.fuse.ui.core.Action;
      import qnx.fuse.ui.events.ActionEvent;
      import qnx.fuse.ui.events.ListEvent;
      import qnx.invoke.ActionQuery;
      import qnx.invoke.InvokeManager;
      import qnx.invoke.InvokeRequest;
      import qnx.invoke.InvokeTarget;
  
      public class InvokeSearchPage extends TitlePage
      {
          private var request : InvokeRequest = null;
          private var targets : List = new List();
  
          /////////////////////////////////////////////////////////////////////////////////////////
          public function InvokeSearchPage()
          {
              super();
              this.title = 'Search With';
              this.titlebar.dismissAction = new Action( 'Cancel', null, {id:'cancel'} );
              this.titlebar.addEventListener(ActionEvent.ACTION_SELECTED, ActionSelected );
  
              this.targets.cellRenderer = com.lib.playbook.renderers.IconListRenderer;
              this.targets.addEventListener(ListEvent.ITEM_CLICKED, TargetSelected );
              this.targets.rowHeight = 140;
              this.addChild( this.targets );
          }
  
          ///////////////////////////////////////////////////////////////////////////////////////////
          public function filter( request :InvokeRequest ) : void
          {
              this.targets.removeAll();
  
              this.request = request;
  
              //trace( 'filter ' + request.mimeType );
              InvokeManager.invokeManager.addEventListener( InvokeQueryTargetEvent.SUCCESS, TargetsFound );
              InvokeManager.invokeManager.queryInvokeTargets( request.mimeType, request.uri, request.action, request.targetOptions );
          }
  
          ///////////////////////////////////////////////////////////////////////////////////////////
          private function TargetsFound( event : InvokeQueryTargetEvent ) : void
          {
              InvokeManager.invokeManager.removeEventListener(InvokeQueryTargetEvent.SUCCESS, TargetsFound );
              //trace( 'TargetsFound' );
              var action : ActionQuery;
              var target : InvokeTarget;
              for each( action in event.actions )
              {
                  for each( target in action.targets )
                  {
                    this.targets.addItem( { data : target.target, label : target.label, icon : 'file://' + target.icon } );
                  }
              }
          }
  
          ////////////////////////////////////////////////////////////////////
          private function TargetSelected( event :Event ) : void
          {
              if( this.targets.selectedIndex >= 0 )
              {
                this.request.target = this.targets.selection;
                InvokeManager.invokeManager.invoke( this.request );
              }
          }
  
          ////////////////////////////////////////////////////////////////////
          private function ActionSelected( event :ActionEvent ) : void
          {
              switch( event.action.data.id )
              {
                  case 'cancel' : this.dispatchEvent( new Event( Event.CANCEL ) ); break;
              }
          }
  
          //////////////////////////////////////////////////////////////////////
          override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void
          {
              super.updateDisplayList( unscaledWidth, unscaledHeight );
  
              this.targets.setPosition( 10, this.top + 10 );
              this.targets.setActualSize( unscaledWidth - 20, unscaledHeight - this.targets.y - 10 );
          }
      }
  }
  

  And the rendering engine:

  package com.lib.playbook.renderers
  {
  
      import qnx.fuse.ui.display.Image;
      import qnx.fuse.ui.listClasses.CellRenderer;
  
      public class IconListRenderer extends CellRenderer
      {
  
          private var icon    :Image = new Image();
  
          /////////////////////////////////////////////////////////////////////////
          public function IconListRenderer()
          {
              super();
          }
  
          ///////////////////////////////////////////////////////////////
          override protected function onAdded():void
          {
              super.onAdded();
              this.addChild( this.icon );
          }
  
          ///////////////////////////////////////////////////////////////
          override protected function onRemoved():void
          {
              super.onRemoved();
              this.removeChild( this.icon );
          }
  
          /////////////////////////////////////////////////////////////////////////////////////
          override protected function drawLabel(unscaledWidth:Number, unscaledHeight:Number):void
          {
              super.drawLabel( unscaledWidth, unscaledHeight );
  
              if( this.data )
              {
  
                  if( this.data.hasOwnProperty( 'icon' ) && this.data.icon != null )
                  {
                      this.icon.setImage( this.data.icon );
                      this.icon.setPosition( 10, 15 );//( unscaledHeight - this.icon.height ) / 2 );
                  }
                  else
                  {
                      this.icon.setImage( null );
                  }
  
              }
  
              this.label.x = 140;
              this.label.width = unscaledWidth - this.label.x - 20;
          }
      }
  }
  

  references com.lib.playbook our our inner classes, but you should get the approach to apply.